A new method for the estimation of the reverberation time from measured room impulse responses with application to Italian opera houses

The Schroeder's backward integration method is the most used method to extract the decay curve of an acoustic impulse response and to calculate the reverberation time from this curve. In the literature the limits and the possible improvements of this method are widely discussed. In this work a new method is proposed for the evaluation of the energy decay curve. The new method has been implemented in a Matlab toolbox. Its performance has been tested versus the most accredited literature method. The values of EDT and reverberation time extracted from the energy decay curves calculated with both methods have been compared in terms of the values themselves and in terms of their statistical representativeness. The main case study consists of nine Italian historical theatres in which acoustical measurements were performed. The comparison of the two extraction methods has also been applied to a critical case, i.e. the structural impulse responses of some building elements. The comparison underlines that both methods return a comparable value of the T30. Decreasing the range of evaluation, they reveal increasing differences; in particular, the main differences are in the first part of the decay, where the EDT is evaluated. This is a consequence of the fact that the new method returns a “locally" defined energy decay curve, whereas the Schroeder's method accumulates energy from the tail to the beginning of the impulse response. Another characteristic of the new method for the energy decay extraction curve is its independence on the background noise estimation. Finally, a statistical analysis is performed on the T30 and EDT values calculated from the impulse responses measurements in the Italian historical theatres. The aim of this evaluation is to know whether a subset of measurements could be considered representative for a complete characterization of these opera houses.

Curve Decomposition for Large Deflection Analysis of Fixed-Guided Beams With Application to Statically Balanced Compliant Mechanisms

Statically balanced compliant mechanisms require no holding force throughout their range of motion while maintaining the advantages of compliant mechanisms. In this paper, a postbuckled fixed-guided beam is proposed to provide the negative stiffness to balance the positive stiffness of a compliant mechanism. To that end, a curve decomposition modeling method is presented to simplify the large deflection analysis. The modeling method facilitates parametric design insight and elucidates key points on the force-deflection curve. Experimental results validate the analysis. Furthermore, static balancing with fixed-guided beams is demonstrated for a rectilinear proof-of-concept prototype.

The Returns to Migration: The Influence of Education and Migration Type

We show the impact of migration type on real wages over time. We create a migration and earnings history from the National Longitudinal Survey of Youth over the period 1979-2002. We estimate the effects of primary, onward, and two types of return migration on real wages using a panel data model with individual, location, and time fixed effects. Panel data are well suited for the study of the returns to U.S. internal migration because the influence of migration on wages has been found to occur years after the event. We differentiate return migration into two types: return to a location with ties that form a geographical anchor (home) and return to a prior place of work. We find that real wage growth varies by migration type. Education attainment is a significant factor in real wage growth. Our results show that onward migration is an important channel by which the monetary rewards to a college education are manifested.

Application and assessment of a robust elastic motion correction algorithm to dynamic MRI

The purpose of this study was to assess the performance of a new motion correction algorithm. Twenty-five dynamic MR mammography (MRM) data sets and 25 contrast-enhanced three-dimensional peripheral MR angiographic (MRA) data sets which were affected by patient motion of varying severeness were selected retrospectively from routine examinations. Anonymized data were registered by a new experimental elastic motion correction algorithm. The algorithm works by computing a similarity measure for the two volumes that takes into account expected signal changes due to the presence of a contrast agent while penalizing other signal changes caused by patient motion. A conjugate gradient method is used to find the best possible set of motion parameters that maximizes the similarity measures across the entire volume. Images before and after correction were visually evaluated and scored by experienced radiologists with respect to reduction of motion, improvement of image quality, disappearance of existing lesions or creation of artifactual lesions. It was found that the correction improves image quality (76% for MRM and 96% for MRA) and diagnosability (60% for MRM and 96% for MRA).

Effect of Frame Size and Hormone Implant on Performance and Carcass Characteristics of Finishing Yearling Heifers: Returns to a Value-Based Market

Four groups of yearling heifers representing different frame sizes—small, medium, and large Angus and medium Simmental—were fed high-grain finishing diets to average Low Choice quality grade. Half the heifers were implanted with estrogen and trenbolone acetate. Backfat and ribeye area were measured by ultrasound four times during the study to assess growth of muscle and fat. Increasing frame size resulted in increased feed intake, greater rates of gain, and a trend towards reduced feed conversion. Greater returns would have been realized from each of the four groups had they been sold in a premium market based on yield grade rather than the conventional grade and yield market. Increasing frame size resulted in greater returns to the value-based market. Implants increased rate of gain and improved feed conversion but did not result in significantly greater returns to the value-based market compared with the grade and yield market. Ribeye area and backfat increased with body weight and time on feed. Increase in ribeye area was linear with time, whereas accumulation of backfat was exponential. Rate of increase in area of ribeye tended to increase and backfat tended to decrease as frame size increased. Implants increased rate of increase in ribeye area but had no effect on rate of deposition of subcutaneous fat. Equations describing growth of ribeye area and backfat for each group predicted average growth for the heifers but did not predict growth of individual heifers. Final carcass yield grade was related to initial thickness of backfat but not to initial ribeye area. These results indicate that the type of cattle selected to be fed for a premium market based on yield grade is important to the success of the program. More work is needed to develop growth equations from ultrasound measurements, but ultrasound will likely be a useful tool in selecting feeder cattle for a value-based market.

Fast parallel kriging-based stepwise uncertainty reduction with application to the identification of an excursion set

Stepwise uncertainty reduction (SUR) strategies aim at constructing a sequence of points for evaluating a function  f in such a way that the residual uncertainty about a quantity of interest progressively decreases to zero. Using such strategies in the framework of Gaussian process modeling has been shown to be efficient for estimating the volume of excursion of f above a fixed threshold. However, SUR strategies remain cumbersome to use in practice because of their high computational complexity, and the fact that they deliver a single point at each iteration. In this article we introduce several multipoint sampling criteria, allowing the selection of batches of points at which f can be evaluated in parallel. Such criteria are of particular interest when f is costly to evaluate and several CPUs are simultaneously available. We also manage to drastically reduce the computational cost of these strategies through the use of closed form formulas. We illustrate their performances in various numerical experiments, including a nuclear safety test case. Basic notions about kriging, auxiliary problems, complexity calculations, R code, and data are available online as supplementary materials.

Impacts of Technology Adoption: Comparing Returns to the Farming Sector in Maine under Alternative Technology Regimes

This thesis tests if certain technology choices are associated with a reduction in the proportion of farming activities in the agro-food system in Maine. Goodman, Sorj, and Wilkinson define appropriationism as the replacement of farming sector activities by industrial inputs. Based on the concept of appropriationism, industrial fanning systems using large amounts of synthetic inputs contribute less to fanning than more agrarian systems, like organic fanning. Thus, returns to the farming sector should be greater for organic compared with conventional potato fanning in Maine since organic farming uses fewer industrial inputs. Goodman et. al. define substitutionism as the displacement of farming sector commodities and activities by industrial processes in the marketing sector. Based on the concept of substitutionism, returns to the farming sector should be greater for Lay's Classic®™ potato chips made from natural potatoes compared with Baked Lay's®™ potato crisps manufactured from processed dehydrated potatoes. Returns to the farming sector are defined as returns to the farmer or farm family from farming activities, returns to farm labor, and returns to farmers and farm labor producing inputs used on the farm. Results show absolute returns to the farming sector are less for organic compared to conventional tablestock potato farms in Maine. However as a proportion of farm revenues, large organic farms that market at least 25% of their produce to retail stores or directly to consumers do as well as conventional farms. When comparing returns as a proportion of consumer expenditures, these organic farms do better than conventional farms. Returns to the farming sector are less for organic because of yield penalties, cost of marketing services, and diseconomies of size for organic tablestock potato farms. Expanding acreage and reintegrating livestock with cropping systems may increase returns to the fanning sector. Organic farming demonstrates difficulties in providing marketing services at the farm level. Providing marketing services limits the ability to expand production to capture economies of size. Maine organic potato farmers emphasize non-monetary values such as supporting sustainable agriculture, self-sufficiency, the intrinsic value of work, and close community and family connections. Returns to the farming sector as a proportion of consumer expenditures are about three times greater for Lay's Classic®™ potato chips than for Baked Lay's®™ potato crisps, since the value that farmers receive for potatoes used to produce dehydrated potato flakes in one pound of crisps is about half of the value that farmers receive for potatoes used to make one pound of chips. However, this assumes farmers assign a cost to producing low-grade potatoes for dehydration proportionate to their value. Premium potatoes are used to produce potato chips. Low-grade potatoes are used to produce the dehydrated potato flakes used to make potato crisps. Returns to the farming sector are slightly greater for potato crisps if no costs are allocated to producing low-grade potatoes for dehydration. A shift in consumer preferences from potato chips to crisps may result in a geographical shift of potato production from Maine to the Pacific Northwest assuming no food-grade dehydration facilities are built in Maine.

Online Format vs. Live Mode of Instruction: Do Human Capital Differences or Differences in Returns to Human Capital Explain the Differences in Outcomes?

Our paper asks the question: Does mode of instruction format (live or online format) effect test scores in the principles of macroeconomics classes? Our data are from several sections of principles of macroeconomics, some in live format, some in online format, and all taught by the same instructor. We find that test scores for the online format, when corrected for sample selection bias, are four points higher than for the live format, and the difference is statistically significant. One possible explanation for this is that there was slightly higher human capital in the classes that had the online format. A Oaxaca decomposition of this difference in grades was conducted to see how much was due to human capital and how much was due to the differences in the rates of return to human capital. This analysis reveals that 25% of the difference was due to the higher human capital with the remaining 75% due to differences in the returns to human capital. It is possible that for the relatively older student with the appropriate online learning skill set, and with schedule constrains created by family and job, the online format provides them with a more productive learning environment than does the alternative traditional live class format. Also, because our data are limited to the student s academic transcript, we recommend future research include data on learning style characteristics, and the constraints formed by family and job choices.

Cost Improvements, Returns to Scale, and Cost Inefficiencies for Real Estate Investment Trusts

This paper extends the existing research on real estate investment trust (REIT) operating efficiencies. We estimate stochastic-frontier, panel-data models specifying a translog cost function. The specified model updates the cost frontier with new information as it becomes available over time. The model can identify frontier cost improvements, returns to scale, and cost inefficiencies over time. The results disagree with most previous research in that we find no evidence of scale economies and some evidence of scale diseconomies. Moreover, we also generally find smaller inefficiencies than those shown by other REIT studies. Contrary to previous research, higher leverage associates with more efficiency.