Blocos compostos

Ilustração componente do jogo “Ortotetris (http://www.loa.sead.ufscar.br/ortotetris.html)” desenvolvido pela equipe do Laboratório de Objetos de Aprendizagem da Universidade Federal de São Carlos (LOA/UFSCar).

Avaliação da conformidade de blocos cerâmicos para alvenaria de vedação produzidas na Região Integrada de Desenvolvimento da Grande Teresina

This research presents an outlook of the industries of red ceramic in the region next to the city of Teresina and an analysis of the ceramic products producted in this pole. The microregion investigated possesses 13 boroughs where were identified 32 ceramic in operation, being that 24 are located in Teresina, the ceramic region more important of Piauí, 1 is located in the city of Miguel Leão and 7 is located in Timon city that belongs to the state of Maranhão. The majority of ceramics are pulverized in these two cities, Teresina and Timon , responsible by a largely production independent of distance between fabric and consumer market. Furthermore, there is an artisanal production realized in other boroughs, mainly manual conformation bricks, where are producted diverse types of handicraft and ceramics utilitarian. The objective of this research is to evalue the conformity of ceramic blocks for brick of obstruction made by red ceramic industry of microregion at studying, verifying their pontentialities and adequacy in terms of production. In this research universe made a search of ceramic industries related to the Foundation CEPRO (Foundation Center of Research Social and Economic of Piauí). For the analysis of the ceramic products , were colected 60 crude bricks sample in three industries for their characterization, and 39 burned bricks sample for the Evaluation of Conformity. The results of the characterization made reached a accetptable standard in all formulations and temperature studied. The burned samples were applied to the geometric, physical and mechanical assays according to the ABNT standards (Brazilian Association of Technical Standards). The results of the physical assays showed that all the samples are at the same band recommended by standard. However, through the geometric assays just two industries did not present results according to the standard, due to lack of control in their process such as in their equipments. Taking into account the mechanical properties, only one industry investigated was not according to the standard

Eficiência relativa de diferentes frações granulometricas de calcários na neutralização da acidez dos solos, avaliada em laboratório

As frações granulométricas retidas nas peneiras n°s (ABNT) 5-10, 10-30, 30-50, e 50-60 de quatro calcários, sendo dois sedimentares e dois metamórficos, foram incubadas durante 160 dias com três tipos de solos, em condições de laboratório. A eficiência das frações na neutralização da acidez dos solos foi avaliada pela variação do pH. Os resultados permitiram concluir que a referida eficiência independe da natureza geológica do calcário mas depende do tipo de solo, sendo decrescente na seguinte ordem: LVd, LEd e LEm. Apesar da legislação atual normatizar as características físicas dos calcários, bem como os seus graus de eficiência, a presente pesquisa sugere novos valores para a eficiência relativa das diferentes frações granulometricas de calcários: fração maior do que 10:0%, de 30:35%; de 30-50:75% e menor que 50:100%.

Avaliação da escória de siderurgia e de calcários como corretivos da acidez do solo no cultivo da alface

O presente trabalho objetivou avaliar os efeitos da escória de siderurgia e dos calcários magnesiano e dolomítico, na produção de matéria seca da alface (Lactuca sativa L.) e as alterações na sua nutrição e em alguns atributos químicos do solo. Os tratamentos consistiram dos corretivos calcário magnesiano e dolomítico e escória de siderurgia, em três doses: 2,36, 4,72 e 7,08 g por vaso. Utilizou-se o delineamento experimental inteiramente casualizado, com quatro repetições, em esquema fatorial 3x3+1 (três corretivos x três doses + testemunha). Todos os materiais corretivos aumentaram a produção de matéria seca da alface, porém destacaram-se os calcários, sendo que para a escória, a alta concentração do Mn na parte aérea limitou a produção. Na parte aérea da alface, os teores e quantidade acumulada de Ca, Mg e Cu aumentaram, e os teores de Mn e Zn não foram alterados com a aplicação dos corretivos. Todos os materiais corretivos foram eficientes na correção da acidez do solo, especialmente quando se utilizou calcário magnesiano. A escória de siderurgia não é o corretivo mais apropriado para a cultura da alface.

Solubilidade de calcários em extratores químicos

A solubilidade de quatro calcários agrícolas, dois sedimentares e dois metamórficos, divididos em quatro frações granulométricas, foi estudada em dois extratores químicos (soluções de ácido clorídrico e de ácido acético), em variadas condições, com o objetivo de avaliar a eficiência desses materiais através desse critério. Os resultados obtidos, comparados com os ensaios de incubação com solos, mostraram que para a pretendida avaliação, os extratores não se prestam para avaliar os calcários agrícolas, visto que não há correlação entre a solubilidade, expressa em equivalente de CaCO3, e a eficiência mostrada nos ensaios de incubação com solos.

Avaliação da qualidade de calcários agrícolas através do PRNT

Foram comparados os valores do PRNT de calcários agrícolas, empregando fórmulas que se baseiam em diferentes valores de eficiência relativa das frações granulométricas que compõem esses materiais. Foram utilizadas 22 amostras de calcários, sendo 12 de Rio Claro, Piracicaba e Tietê, Estado de São Paulo e as demais especialmente escolhidas visando variação nas composições granulométrica e química. Os resultados sugerem que as fórmulas de PRNT que têm sido utilizadas no Brasil , devem estar substimando a eficiência desses produtos , além de carecerem de um respaldo experimental mais convincente. A nova fórmula proposta pode ser mais confiável, apesar de estar também sujeita a várias críticas.

Estudo numérico do comportamento de muros de arrimo em alvenaria estrutural de blocos vazados

Usually masonry structures has low tension strength, hence the design to flexural efforts can results in high reinforcement ratio, specification of high unit and prism strength, structural members with larger section dimensions and modification in structural arrangement to be possible to use masonry members. The main objective of this study is to evaluate the stiffness, the efforts distribution and the effect of horizontal elements (girders) and vertical elements (counterforts) distribution on the behavior of masonry blocks retaining walls. For this purpose, numerical modeling was performed on typical retaining wall arrangements by varying the amount and placement of horizontal and vertical elements, beyond includes elements simulating the reactions of the soil supporting the foundation of the wall. The numerical modeling also include the macro modeling strategy in which the units, mortar and grout are discretized by a standard volume that represents the masonry elastic behavior. Also, numerical model results were compared with those ones of simplified models usually adopted in bending design of masonry elements. The results show horizontal displacements, principal and shear stresses distribution, and bending moments diagrams. From the analysis it was concluded that quantity and manner of distribution of the girders are both important factors to the panel flexural behavior, the inclusion of the foundation changed significantly the behavior of the wall, especially the horizontal displacements, and has been proposed a new way of considering the flanges section of the counterforts

Redes neurais artificiais no ambiente de redes industriais foundation fieldbus usando blocos funcionais padrões

Industrial automation networks is in focus and is gradually replacing older architectures of systems used in automation world. Among existing automation networks, most prominent standard is the Foundation Fieldbus (FF). This particular standard was chosen for the development of this work thanks to its complete application layer specification and its user interface, organized as function blocks and that allows interoperability among different vendors' devices. Nowadays, one of most seeked solutions on industrial automation are the indirect measurements, that consist in infering a value from measures of other sensors. This can be made through implementation of the so-called software sensors. One of the most used tools in this project and in sensor implementation are artificial neural networks. The absence of a standard solution to implement neural networks in FF environment makes impossible the development of a field-indirect-measurement project, besides other projects involving neural networks, unless a closed proprietary solution is used, which dos not guarantee interoperability among network devices, specially if those are from different vendors. In order to keep the interoperability, this work's goal is develop a solution that implements artificial neural networks in Foundation Fieldbus industrial network environment, based on standard function blocks. Along the work, some results of the solution's implementation are also presented

Estratégia de escalonamento de controladores PID baseado em regras Fuzzy para redes industriais foundation fieldbus usando blocos padrões

The main objective of work is to show procedures to implement intelligent control strategies. This strategies are based on fuzzy scheduling of PID controllers, by using only standard function blocks of this technology. Then, the standardization of Foundation Fieldbus is kept. It was developed an environment to do the necessary tests, it validates the propose. This environment is hybrid, it has a real module (the fieldbus) and a simulated module (the process), although the control signals and measurement are real. Then, it is possible to develop controllers projects. In this work, a fuzzy supervisor was developed to schedule a network of PID controller for a non-linear plant. Analyzing its performance results to the control and regulation problem

Análise da Conformidade e Caracterização da Matéria- Prima Empregada na Fabricação de Blocos Cerâmicos na Região Metropolitana de Salvador

The potential market of the metropolitan area of Salvador accounts for the estimated consumption of roughly 800 million horizontally perforated extruded clay bricks a year. The growing demand of consumers along with the competitiveness of the structural ceramic sector has driven forward a number of recent efforts and investments towards improving the quality of structural ceramics. In this scenario, the present study focused on sampling and evaluating the conformity of 8-hole horizontally perforated extruded clay bricks manufactured by different plants (A, B and C) in the metropolitan area of Salvador. In addition, representative clay and sandy-clay materials were collected from each plant and characterized by conventional physical, chemical and mineralogical techniques. Finally, experimental compositions designated as A, B and C, according to the source, were prepared by mixing different contents of the raw materials collected in the plants, fired at different temperatures and characterized. The results revealed a series of non conformities regarding ABNT guidelines. The characterization of raw materials revealed the presence of kaolinite and ilite in concentrations ranging from 64 to 90 wt.% along with free quartz (10 - 25%). The sandy-clay samples consisted basically of kaolinite. All raw materials depicted low contents of organics, amorphous constituents, alkaline oxides and feldspar. An analysis of the firing behavior of all different ceramic compositions revealed that the linear contraction of composition A was rather significant considering the temperature range evaluated, and it justifies the significant dimensional non conformity that was shown by bricks made with the ceramic A

Alterações nos atributos químicos de um Latossolo distroférrico decorrentes da granulometria e doses de calcário em sistemas plantio direto e convencional

Atualmente, percebe-se o interesse na calagem superficial, sem prévia incorporação, para instalação do sistema plantio direto (SPD). Dessa forma, objetivou-se determinar os efeitos de granulometria e doses de calcários no SPD, em fase de implantação, e no sistema de plantio convencional (SPC) sobre o pH, H + Al, Ca2+ e Mg2+. O experimento foi realizado no ano agrícola de 1998/99, na FCA/UNESP-Botucatu (SP), em Latossolo Vermelho. O delineamento experimental foi de blocos ao acaso, com parcelas subsubdivididas e quatro repetições. As parcelas representaram os sistemas de plantio (SPD e SPC); as subparcelas, a granulometria dos calcários [grosso (PRNT = 56 %) e fino (PRNT = 90 %)], e as subsubparcelas, as doses de 2, 4 e 6 t ha-1 (calcário grosso) e 1,2; 2,4 e 3,6 t ha-1 (fino). O solo foi amostrado, a 0-5, 5-10, 10-20 e 20-40 cm de profundidade, 1, 3 e 12 meses após a aplicação dos corretivos. A análise de variância não detectou interação tripla entre os fatores. A aplicação de calcário superficial no SPD, independentemente da granulometria e da dose, alterou positivamente os atributos químicos do solo (0-5 e 5-10 cm), 12 meses após a calagem. O corretivo continuou reagindo, independentemente do sistema de plantio, de forma intensa, mesmo após três meses. A aplicação de doses mais elevadas de calcário, com maior granulometria, sugeriu efeito residual prolongado.

Estudo térmico e de materiais na construção de casas populares com blocos confeccionados a partir de um composto a base de cimento, gesso, eps e raspa de pneu

We built an experimental house on an UFRN´s land using blocks made by a composite consisting of cement, plaster, EPS, crushed rubber and sand. Several blocks were made from various compositions and we made preliminary tests of mechanical and thermal resistance, choosing the most appropriate proportion. PET bottles were used inside the block to provide thermal resistance. In this work, a second function was given to the bottles: to serve as a docking between the blocks, because the ends of the cylinders came out of each block on top as well as at the bottom, with the bottom cut, allowing to fit of the extremities of the upper cylinder of a block in the lower holes of the other one, which were formed by the cutting already mentioned. Minimum compression tests were performed according to ABNT standards for walls closing blocks (fence). With that house built, we did studies of thermal performance in order to ascertain conditions of comfort, checking external and internal temperatures in the walls and in the ambient, among other variables, such as wind speed and relative humidity. The resulting blocks provided adequate thermal insulation to the environment, where the walls presented differences up to 11.7 ºC between the outer and inner faces, getting the maximum temperature inside the house around 31 °C, within the so-called thermal comfort zone for warm climates. At the end of the experiments it was evident the effectiveness of that construction in order to provide thermal comfort in the internal environment of the house, as well as we could confirm the viability of building houses from recyclable materials, reducing the constructive costs, becoming a suitable alternative for low- incoming families. Moreover, besides the low cost, the proposal represents an alternative use of various recyclable materials, therefore considered an ecological solution

Compósito para fabricação de blocos para construção de casas: estudos térmico e de materiais

We present two models of blocks made of composite material obtained from the use of cement, plaster, EPS crushed, shredded tire, mud, sand and water, for the construction of popular housing. Were made metal molds for the manufacture of blocks to be used in the construction of a residence for low-income families. Performed tests of compressive strength of the composite for various formulations that met the specific standard for blocks used in construction. To study the thermal conductivity of the composite for further study of thermal comfort generated in a residence built with the proposed composite. We also determined the mass-specific and water absorption for each formulation studied. Using a home already built with another composite material, made up the closing of a window with the building blocks and found the thermal insulation, measuring external and internal temperatures of the blocks. The blocks had made good thermal insulation of the environment, resulting in differences of up to 12.6°C between the outer and inner faces. It will be shown the feasibility of using composite for the end proposed and chosen the most appropriate wording