Controlling Asian soybean rust (Phakopsora pachyrhizi) with Bacillus spp. and coffee oil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Selecting for rust (Puccinia psidii) reistance in Euclyptus grandis in São Paulo state, Brazil

In Brazil, Eucalyptus grandis is a key species for wood production. However, some genotypes are susceptible to rust (Puccinia psidii), mainly in São Paulo State, where climatic conditions are favorable for its development. Rust represents a high economic risk to forest companies because of the high potential of damage to commercial eucalypt plantations. The aims of the present study were (i) to select progenies of E. grandis for stability and adaptability regarding resistance to rust at different locations; (ii) compare the selections under these different climatic conditions; and (iii) compare rust severity in the field with the theoretical model. We observed that climatic conditions were extremely influential factors for rust development, but even under favorable conditions for disease development, we found rust-resistant progenies. In sites unfavorable for rust development, we detected highly susceptible progenies. We found significant correlation among the genetic material, environmental conditions and disease symptoms, however, we observed a simple genotype-environmental interaction and significant genetic variability among the progenies. The average heritability was high among the progenies in all sites, indicating substantial genetic control for rust resistance. We also observed a good relationship between rust severity in the field and the theoretical model that considered annual average temperature and leaf wetness.

Endophytic microorganisms isolated from coffee leaves, roots and branches as plant growth promoters and biocontrol agents of coffee leaf rust

Suppression of plant diseases and growth promotion due to the action of endophytic microorganisms has been demonstrated in several pathosystems. Experiments under controlled conditions involving 234 endophytic bacteria and fungi isolated from coffee leaves, roots and branches were conducted with the objective of evaluating the germination inhibition of Hemileia vastatrix urediniospores, the control of coffee leaf rust development in tests with leaf discs and on plastic bags seedling, and to promote growth of coffee seedlings. None of the fungal isolates induced plant growth or reduced disease severity. The bacterial isolates (identified by the fatty acids profile analysis) 85G (Escherichia fergusonii), 161G, 163G, 160G, 150G (Acinetobacter calcoaceticus) and 109G (Salmonella enterica) increased plant growth, the maximum being induced by 85G. This isolate produced in vitro phosphatase and indol acetic acid. In assay to control rust on coffee leaf disc, nine bacterial isolates, 64R, 137G, 3F (Brevibacillus choshinensis), 14F (Salmonella enterica), 36F (Pectobacterium carotovorum), 109G (Bacillus megaterium), 115G (Microbacterium testaceum), 116G and 119G (Cedecea davisae) significantly reduced disease severity, when applied 72 or 24h before challenging with the pathogen. In seedling tests most disease severity reduction was achieved by the isolates 109G and 119G. There was no correspondence between the organisms that promoted seedling growth and those that reduced rust severity on seedlings or leaf discs.

Effects of elevated atmospheric carbon dioxide on the biological control of coffee leaf rust under controlled conditions

The effect of elevated atmospheric CO2 concentration on biological control of coffee leaf rust, caused by Hemileia vastatrix, was evaluated by leaf disc assay, under controlled conditions. The biocontrol agents Bacillus subtilis, Bacillus pumilus and Lecanicillium longisporum were applied 24h before, 24h after, and simultaneously with the H. vastatrix on leaf discs (diameter of 1.5cm). The CO2 concentrations tested were: 380, 430, 700 and 1300ppm for B. subtilis and B. pumilus; and 380, 430, 670 and 1200ppm for L. longisporum. The antagonists were not affected by CO2 concentrations. B. subtilis was the most effective in controlling the disease when applied before and simultaneously with pathogen.

EC28-36 Spraying Tree Fruits (Revised March 1932)

The production of sound, clean fruit is unquestionably one of the major problems facing the modern fruit grower. Culture may be neglected and pruning delayed for a time but the omission of sprays for even a single season demonstrates their absolute necessity. This applies equally to the commercial grower and to the farmer or gardener who has only a few trees. Spray materials, equipment, management, schedules, insect pests and orchard diseases are discussed in this 1928 extension circular.

EC03-1892 Identifying Soybean Rust

This four-color extension circular identifies the different diseases of soybeans: soybean rust, bacterial blight, bacterial pustle, and downy mildew. It also shows diseases that are similar looking: Cercospora blight, Frogeye leaf spot and brown spot. It also discusses what to look for when scouting for soybean rust.

Urediospores of rust fungi are ice nucleation active at > -10°C and harbor ice nucleation active bacteria

Various features of the biology of the rust fungi and of the epidemiology of the plant diseases they cause illustrate the important role of rainfall in their life history. Based on this insight we have characterized the ice nucleation activity (INA) of the aerially disseminated spores (urediospores) of this group of fungi. Urediospores of this obligate plant parasite were collected from natural infections of 7 species of weeds in France, from coffee in Brazil and from field and greenhouse-grown wheat in France, the USA, Turkey and Syria. Immersion freezing was used to determine freezing onset temperatures and the abundance of ice nuclei in suspensions of washed spores. Microbiological analyses of spores from France, the USA and Brazil, and subsequent tests of the ice nucleation activity of the bacteria associated with spores were deployed to quantify the contribution of bacteria to the ice nucleation activity of the spores. All samples of spores were ice nucleation active, having freezing onset temperatures as high as −4 °C. Spores in most of the samples carried cells of ice nucleation-active strains of the bacterium Pseudomonas syringae (at rates of less than 1 bacterial cell per 100 urediospores), but bacterial INA accounted for only a small fraction of the INA observed in spore suspensions. Changes in the INA of spore suspensions after treatment with lysozyme suggest that the INA of urediospores involves a polysaccharide. Based on data from the literature, we have estimated the concentrations of urediospores in air at cloud height and in rainfall. These quantities are very similar to those reported for other biological ice nucleators in these same substrates. However, at cloud level convective activity leads to widely varying concentrations of particles of surface origin, so that mean concentrations can underestimate their possible effects on clouds. We propose that spatial and temporal concentrations of biological ice nucleators active at temperatures > −10 °C and the specific conditions under which they can influence cloud glaciation need to be further evaluated so as to understand how evolutionary processes could have positively selected for INA.

Association mapping of stem rust resistance in durum wheat at the seedling and adult plant stages

In wheat, stem rust is known to rapidly evolve new virulence to resistance genes. While more than 50 stem rust resistance (Sr) loci have been identified in wheat, only a few remain effective, particularly against the highly virulent race Ug99 (TTKSK race) and a mixture of durum-specific races. An association mapping (AM) study based on 183 durum wheat accessions was utilized to identify resistance loci for stem rust response in Ethiopia over four seasons and artificial inoculation with Ug99 (TTKSK race) and a mixture of durum-specific races under field conditions as well as in greenhouse test at seedling stage under controlled conditions for resistance to four highly virulent stem rust races: TRTTF, TTTTF, (TTKSK (Ug99) and JRCQC. The panel was profiled with 1,253 SSR and DArT markers. Twelve QTL-tagging markers were significant (P < 0.05) across three to four seasons. The role of Sr13, Sr9, Sr14, Sr17, and Sr28 was confirmed. Thirteen significant markers were in regions with no Sr genes/QTLs. The results under controlled conditions showed that 15, 20, 19 and 19 chromosome regions harbored markers that showed significant effects for races TRTTF, TTTTF, TTKSK and JRCQC, respectively. These genomic regions showed marker R2 values ranging from 1.13 to 8.34, 1.92 to 17.64, 1.75 to 23.12 and 1.51 to 15.33% for races TRTTF, TTTTF, TTKSK and JRCQC, respectively. The study demonstrates that stem rust resistance in durum wheat is governed in part by shared loci and in part by race-specific ones. The QTLs identified in this study through AM will be useful in the marker-assisted development of durum wheat cultivars with durable stem rust resistance.

Das OtCM-System zur elektronischen Compliance-Messung : Qualitätsuntersuchung der OtCM-Blister und e-Dispenser ; Validierung und Nutzenevaluation im Vergleich mit MEMS

Im Rahmen der vorliegenden Arbeit wurden Eignung und Nutzen des „Objective therapy Compliance Measurement“ (OtCMTM)-Systems, einer innovativen Weiterentwicklung im Bereich der elektronischen Compliance-Messung, untersucht. Unter experimentellen Bedingungen wurden Funktionalität und Verlässlichkeit der elektronischen OtCMTM-Blisterpackungen überprüft, um deren Eignung für den klinischen Einsatz zu zeigen. Funktionalität (≥90% lesbare Blister), Richtigkeit (≤2% Fehler) und Robustheit waren bei den OtCMTM-Blistern der Version 3 gegeben, nachdem die Fehler der Versionen 1 und 2 in Zusammenarbeit mit dem Hersteller TCG identifiziert und eliminiert worden waren. Der als Alternative zu den elektronischen Blistern für die Verpackung von klinischen Prüfmustern entwickelte OtCMTM e-Dispenser wurde bezüglich Funktionalität und Anwenderfreundlichkeit in einer Pilotstudie untersucht. Dabei wurde ein Optimierungsbedarf festgestellt. In einer klinischen Studie wurde das OtCMTM-System mit dem als „Goldstandard“ geltenden MEMS® verglichen. Vergleichskriterien waren Datenqualität, Akzeptanz und Anwenderfreundlichkeit, Zeitaufwand bei der Bereitstellung der Medikation und Datenauswertung, sowie Validität. Insgesamt 40 Patienten, die mit Rekawan® retard 600mg behandelt wurden, nahmen an der offenen, randomisierten, prospektiven Studie teil. Das OtCMTM-System zeigte sich bezüglich Validität, Akzeptanz und Anwenderfreundlichkeit mit MEMS® vergleichbar. Eine erwartete Zeitersparnis wurde mit dem OtCMTM-System gegenüber MEMS® nicht erreicht. Vorteile des OtCMTM-Systems sind eine höhere Datenqualität und die Möglichkeit zum Einsatz in der Telemedizin.

Einflüsse von Folienqualität und Blister-Design auf die Funktionalität von Blisterverpackungen

Ziel dieser Arbeit ist die Untersuchung der Einflüsse von Blister-Design und Folienqualität auf die Funktionalität von Blisterverpackungen. Hierzu werden analytische Methoden mittels Interferometrie, IR-Spektroskopie, Betarückstreuverfahren, Wirbelstromverfahren und Impedanzspektroskopie entwickelt, die zur quantitativen Bestimmung von Heißsiegellacken und Laminatbeschichtungen von Aluminium-Blisterfolien geeignet sind. Ein Vergleich der Methoden zeigt, dass sich das Betarückstreuverfahren, die Interferometrie und IR-Messungen für die Heißsiegellackbestimmung, die Interferometrie und das Wirbelstromverfahren für die Bestimmung von Kunststofflaminaten eignen.rnIm zweiten Abschnitt der Arbeit werden Einflüsse des Heißsiegellack-Flächengewichtes von Deckfolien auf die Qualität von Blisterverpackungen untersucht. Mit Zunahme des Flächengewichtes zeigt sich eine Erhöhung der Siegelnahtfestigkeit aber auch der Wasserdampfdurchlässigkeit von Blistern. Die untersuchten Heißsiegellacke zeigen Permeationskoeffizienten vergleichbar mit Polyvinylchlorid. In Untersuchungen zur Siegelprozessvalidität zeigt das Heißsiegellack-Flächengewicht nur geringfügige Auswirkungen auf diese. rnIm dritten Abschnitt der Arbeit werden Einflüsse des Blister-Designs auf die Benutzerfreundlichkeit von Blisterverpackungen durch eine Handlingstudie untersucht. Variationen der Öffnungskräfte von Durchdrück-Blistern wirken sich deutlich auf die Bewertungen der Blister durch die Probanden aus. Während die meisten Probanden alle getesteten Durchdrück-Blister innerhalb der Testdauer von 4 Minuten öffnen können (>84%), treten beim Peel-Blister und Peel-off-push-through-Blister deutlich mehr Handlingprobleme auf. Die Handlingprobleme korrelieren mit dem Alter, der Lebenssituation, der gesundheitlichen Verfassung und der Sehfähigkeit der Probanden. rn

Studio di fattibilità tecnica di una macchina automatica per la gestione di blister farmaceutici

Lo scopo principale dell’elaborato è descrivere e studiare la fattibilità tecnica e le fasi di progettazione e di realizzazione di una macchina automatica adibita alla gestione di blister farmaceutici. Tale attività è stata svolta in collaborazione con l’azienda Siropack Italia S.r.l. a seguito di un percorso di tirocinio curriculare. E’ dunque obiettivo della tesi esplicitare, motivandole, le scelte effettuate in campo progettuale, grazie alle quali si è arrivati alla realizzazione vera e propria della macchina. Dopo una descrizione dell’azienda e dei settori verso cui si interfaccia, si passa ad esporre, in maniera generale, il panorama farmaceutico nazionale ed internazionale, descrivendo anche il cliente per il quale è stata realizzata la macchina e ogni step affrontato per la sua progettazione. In questa fase viene descritto anche il nastro adibito alla gestione del magazzino, dove sosteranno numerose unità del prodotto lavorato. Si conclude poi con la descrizione dei passi che portano la macchina al suo effettivo funzionamento. Essendo un prototipo, dovrà poi affrontare numerose ore di prove e collaudi prima di essere definitivamente consegnata al cliente; in questo elaborato non verrà, però, descritto quest’ultimo step poiché la linea, della quale la macchina fa parte, è tutt’ora in fase di realizzazione.