Desarrollo sostenible de la construcción naval: dinámica evolutiva y eco-innovación en el sector de reparaciones europeo

El impacto ambiental directo de la construcción naval, que se refiere a la construcción, mantenimiento y reparación de buques, no es de ninguna manera pequeño. La construcción de buques depende de un gran número de procesos que por sí mismos constituyen un riesgo significativo de daño medio ambiental en el entorno de los astilleros y que conducen a emisiones significativas de gases de efecto invernadero. Además, la construcción naval utiliza algunos materiales que no sólo puede llevar a graves consecuencias para el daño ambiental durante su producción y su uso en el proceso de construcción de la nave, sino también posteriormente durante la reparación de buques, el funcionamiento y las actividades de reciclaje. (OECD 2010) El impacto ambiental directo de la construcción naval constituye de por sí, un desafío importante para la industria. Pero este impacto no queda limitado a su entorno inmediato, aunque la Construcción Naval no es directamente responsable de la repercusión en el medio ambiente de la operación y el reciclaje de buques comerciales, si es una parte integral de estas actividades. (OECD 2010) En esta tesis se sugiere que el sector de la construcción naval puede y debe aceptar sus responsabilidades ambientales no solo en el entorno del astillero; también en la operación de los buques, sus productos; tomando conciencia, a través de un enfoque de ciclo de vida, del desempeño ambiental de la industria en su conjunto. Es necesario intensificar esfuerzos a medida que el impacto ambiental de la industria es cada vez más visible en el dominio público, en pro de un crecimiento verde que permita aumentar la capacidad de actividad o producción económica al tiempo que reduce o elimina, los impactos ambientales. Este será un imperativo para cualquier futura actividad industrial y exigirá naturalmente conocimiento ambiental intrincado perteneciente a todos los procesos asociados. Esta tesis - aprovechando como valiosa fuente de información los desarrollos y resultados del proyecto europeo: “Eco_REFITEC”. FP7-CP-266268, coordinado por el autor de esta Tesis, en nombre de la Fundación Centro Tecnológico SOERMAR - tiene como primer objetivo Investigar la interpretación del concepto de Construcción Naval y Transporte Marítimo sostenible así como las oportunidades y dificultades de aplicación en el sector de la Construcción y reparación Naval. Ello para crear o aumentar el entendimiento de la interpretación del concepto de transporte marítimo sostenible y la experiencia de su aplicación en particular en los astilleros de nuevas construcciones y reparación. Pretende también contribuir a una mejor comprensión de la industria Marítima y su impacto en relación con el cambio climático, y ayudar en la identificación de áreas para la mejora del desempeño ambiental más allá de las operaciones propias de los astilleros; arrojando luz sobre cómo puede contribuir la construcción naval en la mejora de la eficiencia y en la reducción de emisiones de CO2 en el transporte marítimo. Se espera con este enfoque ayudar a que la Industria de Construcción Naval vaya abandonando su perspectiva tradicional de solo mirar a sus propias actividades para adoptar una visión más amplia tomando conciencia en cuanto a cómo sus decisiones pueden afectar posteriormente las actividades aguas abajo, y sus impactos en el medio ambiente, el cambio climático y el crecimiento verde. Si bien cada capítulo de la tesis posee su temática propia y una sistemática específica, a su vez retoma desde una nueva perspectiva cuestiones importantes abordadas en otros capítulos. Esto ocurre especialmente con algunos ejes que atraviesan toda la tesis. Por ejemplo: la íntima relación entre el transporte marítimo y el sector de construcción naval, la responsabilidad de la política internacional y local, la invitación a buscar nuevos modos de construir el futuro del sector a través de la consideración de los impactos ambientales, económicos y sociales a lo largo de ciclo de vida completo de productos y servicios. La necesidad de una responsabilidad social corporativa. Estos temas no se cierran ni terminan, sino que son constantemente replanteados tratando de enriquecerlos. ABSTRACT The direct environmental impact of shipbuilding, which refers to construction, maintenance and repair of vessels, is by no means small. Shipbuilding depends on a large number of processes which by themselves constitute significant risks of damage to the shipyards‘ surrounding environment and which lead to significant emissions of greenhouse gases. In addition, shipbuilding uses some materials which not only may carry serious implications for environmental harm during their production and usage in the ship construction process, but also subsequently during ship repairing, operation, and recycling activities. (OECD 2010) The direct environmental impact of shipbuilding constitutes a major challenge for the industry. But this impact is not limited on their immediate surroundings, but while not being directly responsible for the impact on the environment from the operation and final recycling of commercial ships, shipbuilding is an integral part of these activities. (OECD 2010) With this in mind, this thesis is suggested that the shipbuilding industry can and must take up their environmental responsibilities not only on their immediate surroundings, also on the ships operation, becoming aware through a “life cycle” approach to ships, the environmental performance of the industry as a whole. As the environmental impact of the industry is becoming increasingly visible in the public domain much more effort is required for the sake of “green growth” which implies the ability to increase economic activity or output while lowering, or eliminating, environmental impacts. This will be an imperative for any future industrial activity and will naturally demand intricate environmental knowledge pertaining to all associated processes. This thesis making use as a valuable source of information of the developments and results of an European FP7-collaborative project called "Eco_REFITEC, coordinated by the author of this thesis on behalf of the Foundation Center Technology SOERMAR, has as its primary objective to investigate the interpretation of a sustainable Shipbuilding and Maritime Transport concept and the challenges and opportunities involved in applying for the Shipbuilding and ship repair Sector. It is done to improve the current understanding regarding sustainable shipping and to show the application experience in shipbuilding and ship repair shipyards. Assuming that sustainability is more than just an act but a process, this academic work it also aims to contribute to a much better understanding of the maritime industry and its impact with respect to climate change, and help in identifying areas for better environmental performance beyond the shipyard's own operations; shedding light on how shipbuilding can contribute in improving efficiency and reducing CO2 emissions in shipping. It is my hope that this thesis can help the Shipbuilding Industry to abandon its traditional perspective where each simply looks at its own activities to take a broader view becoming aware as to how their decisions may further affect downstream activities and their impacts on the environment, climate change and green growth. Although each chapter will have its own subject and specific approach, it will also take up and re-examine important questions previously dealt with. This is particularly the case with a number of themes which will reappear as the thesis unfolds. As example I will point to the intimate relationship between the shipping and shipbuilding industry, the responsibility of international and local policy, the call to seek other ways of building the future of the sector through the consideration of the environmental, economic and social impacts over the full life cycle of the products and services, the need for a corporate social responsibility. These questions will not be dealt with once and for all, but reframed and enriched again and again.

Financial Sector Development and Integration in the Southern and Eastern Mediterranean: Towards a long-term sustainable transition. MEDPRO Policy Paper No. 7, April 2013

This MEDPRO Policy Paper examines the trends and prospects in financial-sector development and integration in the southern and eastern Mediterranean countries and concludes with an agenda for a long-term sustainable transition where finance turns to be a positive stimulus to long-term growth.

Competitive advantage in public-sector organizations: explaining the public good/sustainable competitive advantage paradox

Resource-based views of the firm and in particular Kay's (Why Firms Succeed. Oxford: Oxford Univ. Press, 1995) model of sustainable competitive advantage have been used to advance an understanding of differences in the competitive advantage of private-sector firms. We extend the analysis to a public-sector firm where its major purpose includes engaging in public good by giving away its knowledge base and services. The case highlights the paradox that many public-sector organizations face in simultaneously pursuing public good and sustainable competitive advantage. While Kay's model is applicable for understanding intergovernmental agency competition, we find it necessary to incorporate resource dependency theory to address the paradox. Implications for theory and practice are provided. (C) 2002 Elsevier Inc. All rights reseved.

Trigeneration using biomass energy for sustainable development

Purpose: The paper aims to design and prove the concept of micro-industry using trigeneration fuelled by biomass, for sustainable development in rural NW India. Design/methodology/approach: This is being tested at village Malunga, near Jodhpur in Rajasthan. The system components comprise burning of waste biomass for steam generation and its use for power generation, cooling system for fruit ripening and the use of steam for producing distilled water. Site was selected taking into account the local economic and social needs, biomass resources available from agricultural activities, and the presence of a NGO which is competent to facilitate running of the enterprise. The trigeneration system was designed to integrate off-the-shelf equipment for power generation using boilers of approximate total capacity 1 tonne of fuel per hour, and a back-pressure steam turbo-generator (200 kW). Cooling is provided by a vapour absorption machine (VAM). Findings: The financial analysis indicates a payback time of less than two years. Nevertheless, this is sensitive to market fluctuations and availabilities of raw materials. Originality/value: Although comparable trigeneration systems already exist in large food processing industries and in space heating and cooling applications, they have not previously been used for rural micro-industry. The small-scale (1-2 m3/h output) multiple effect distillation (3 effect plus condenser) unit has not previously been deployed at field level. © Emerald Group Publishing Limited.

A sustainable supply chain study of the Indian bioenergy sector

In India, more than one third of the population do not currently have access to modern energy services. Biomass to energy, known as bioenergy, has immense potential for addressing India’s energy poverty. Small scale decentralised bioenergy systems require low investment compared to other renewable technologies and have environmental and social benefits over fossil fuels. Though they have historically been promoted in India through favourable policies, many studies argue that the sector’s potential is underutilised due to sustainable supply chain barriers. Moreover, a significant research gap exists. This research addresses the gap by analysing the potential sustainable supply chain risks of decentralised small scale bioenergy projects. This was achieved through four research objectives, using various research methods along with multiple data collection techniques. Firstly, a conceptual framework was developed to identify and analyse these risks. The framework is founded on existing literature and gathered inputs from practitioners and experts. Following this, sustainability and supply chain issues within the sector were explored. Sustainability issues were collated into 27 objectives, and supply chain issues were categorised according to related processes. Finally, the framework was validated against an actual bioenergy development in Jodhpur, India. Applying the framework to the action research project had some significant impacts upon the project’s design. These include the development of water conservation arrangements, the insertion of auxiliary arrangements, measures to increase upstream supply chain resilience, and the development of a first aid action plan. More widely, the developed framework and identified issues will help practitioners to take necessary precautionary measures and address them quickly and cost effectively. The framework contributes to the bioenergy decision support system literature and the sustainable supply chain management field by incorporating risk analysis and introducing the concept of global and organisational sustainability in supply chains. The sustainability issues identified contribute to existing knowledge through the exploration of a small scale and developing country context. The analysis gives new insights into potential risks affecting the whole bioenergy supply chain.

From Unemployment to Sustainable Livelihoods in Ottawa's Technology Sector (Working Paper 44)

Since submission of the draft report to the OECD‐LEED Program on 30 June 2007, a unique seven‐years retrospective study of the unemployed high technology workers was released by Statistics Canada.1 Drawing upon Statistics Canada’s confidential Longitudinal Worker File – itself constructed from four administrative data sources that linked Records of Employment and tax filer information by the Social Insurance Number and firm‐level data by a company identifier – this study was able to identify and trace the re‐employment of those permanently laid off in the high‐tech industry by location. The findings are stunning.

Hydrothermal carbonization in the synthesis of sustainable porous carbon materials

Carbon materials are found versatile and applicable in wide range of applications. During the recent years research of carbon materials has focussed on the search of environmentally friendly, sustainable, renewable and low-cost starting material sources as well as simple cost-efficient synthesis techniques. As an alternative synthesis technique in the production of carbon materials hydrothermal carbonization (HTC) has shown a great potential. Depending on the application HTC can be performed as such or as a pretreatment technique. This technique allows synthesis of carbon materials i.e. hydrochars in closed vessel in the presence of water and self-generated pressure at relatively low temperatures (180-250 ˚C). As in many applications well developed porosity and heteroatom distribution are in a key role. Therefore in this study different techniques e.g. varying feedstock, templating and post-treatment in order to introduce these properties to the hydrochars structure were performed. Simple monosaccharides i.e. fructose or glucose and more complex compounds such as cellulose and sludge were performed as starting materials. Addition of secondary precursor e.g. thiophenecarboxaldehyde and ovalbumin was successfully exploited in order to alter heteroatom content. It was shown that well-developed porosity (SBET 550 m2/g) can be achieved via one-pot approach (i.e. exploitation of salt mixture) without conventionally used post-carbonization step. Nitrogen-enriched hydrochars indicated significant Pb(II) and Cr(VI) removal efficiency of 240 mg/g and 68 mg/g respectively. Sulphur addition into carbon network was not found to have enhancing effect on the adsorption of methylene blue or change acidity of the carbon material. However, these hydrochars were found to remove 99.9 % methylene blue and adsorption efficiency of these hydrochars remained over 90 % even after regeneration. In addition to water treatment application N-rich high temperature treated carbon materials were proven applicable as electrocatalyst and electrocatalyst support. Hydrothermal carbonization was shown to be workable technique for the production of carbon materials with variable physico-chemical properties and therefore hydrochars could be applied in several different applications e.g. as alternative low-cost adsorbent for pollutant removal from water.

Development of new vocational training modules on sustainable buildings maintenance and refurbishment

This article presents the methodology and main results obtained in Spain within the FORMAR project, a European-funded project under the Leonardo Da Vinci scheme (Lifelong Learning Programme), whose main goal is to jointly develop training resources and modules to improve the skills on sustainability issues of buildings maintenance and refurbishment workers, in three different European countries: Spain, Portugal (Project Coordinator) and France. The Units of Short-term Training (UST) developed within this project are focused on the VET of carpenters, painters, bricklayers, building technicians and installers of solar panels, and a transversal unit containing basic concepts on sustainable construction and nearly Zero Energy Buildings (n-ZEB) is also developed. In parallel, clients’ guides for the aforementioned professionals are also implemented to improve the information provided to clients and owners in order to support the procurement decisions regarding building products and materials. Therefore, the project provides an opportunity to exchange experiences between organizations of these three European countries, as the UST will be developed simultaneously in each of them, exploring opportunities for training, guidance and exchange of experience. Even though the UST will have a common structure and contents, they will be slightly different in each country to adapt them to the different specific training needs and regulations of Spain, Portugal and France. This paper details, as a case study, the development process of the UST for carpenters and building technicians in Spain, including the analysis of needs and existing training materials, the main contents developed and the evaluation and testing process of the UST, which involves the active participation of several stakeholders of this sector as well as a classroom testing to obtain the students’ feedback.

Assessment and Life-Cycle Analysis of Recycled Materials for Sustainable Highway

Recycled materials replacing part of virgin materials in highway applications has shown great benefits to the society and environment. Beneficial use of recycled materials can save landfill places, sparse natural resources, and energy consumed in milling and hauling virgin materials. Low price of recycled materials is favorable to cost-saving in pavement projects. Considering the availability of recycled materials in the State of Maryland (MD), four abundant recycled materials, recycled concrete aggregate (RCA), recycled asphalt pavement (RAP), foundry sand (FS), and dredged materials (DM), were studied. A survey was conducted to collect the information of current usage of the four recycled materials in States’ Department of Transportation (DOTs). Based on literature review, mechanical and environmental properties, recommendations, and suggested test standards were investigated separately for the four recycled materials in different applications. Constrains in using these materials were further studied in order to provide recommendations for the development of related MD specifications. To measure social and environmental benefits from using recycled materials, life-cycle assessment was carried out with life-cycle analysis (LCA) program, PaLATE, and green highway rating system, BEST-in-Highway. The survey results indicated the wide use of RAP and RCA in hot mix asphalt (HMA) and graded aggregate base (GAB) respectively, while FS and DM are less used in field. Environmental concerns are less, but the possibly low quality and some adverse mechanical characteristics may hinder the widely use of these recycled materials. Technical documents and current specifications provided by State DOTs are good references to the usage of these materials in MD. Literature review showed consistent results with the survey. Studies from experimental research or site tests showed satisfactory performance of these materials in highway applications, when the substitution rate, gradation, temperature, moisture, or usage of additives, etc. meet some requirements. The results from LCA revealed significant cost savings in using recycled materials. Energy and water consumption, gas emission, and hazardous waste generation generally showed reductions to some degree. Use of new recycled technologies will contribute to more sustainable highways.

Sustainable Energy Production in the United States: Life Cycle Assessment of Biofuels and Bioenergy

The United States of America is making great efforts to transform the renewable and abundant biomass resources into cost-competitive, high-performance biofuels, bioproducts, and biopower. This is the key to increase domestic production of transportation fuels and renewable energy, and reduce greenhouse gas and other pollutant emissions. This dissertation focuses specifically on assessing the life cycle environmental impacts of biofuels and bioenergy produced from renewable feedstocks, such as lignocellulosic biomass, renewable oils and fats. The first part of the dissertation presents the life cycle greenhouse gas (GHG) emissions and energy demands of renewable diesel (RD) and hydroprocessed jet fuels (HRJ). The feedstocks include soybean, camelina, field pennycress, jatropha, algae, tallow and etc. Results show that RD and HRJ produced from these feedstocks reduce GHG emissions by over 50% compared to comparably performing petroleum fuels. Fossil energy requirements are also significantly reduced. The second part of this dissertation discusses the life cycle GHG emissions, energy demands and other environmental aspects of pyrolysis oil as well as pyrolysis oil derived biofuels and bioenergy. The feedstocks include waste materials such as sawmill residues, logging residues, sugarcane bagasse and corn stover, and short rotation forestry feedstocks such as hybrid poplar and willow. These LCA results show that as much as 98% GHG emission savings is possible relative to a petroleum heavy fuel oil. Life cycle GHG savings of 77 to 99% were estimated for power generation from pyrolysis oil combustion relative to fossil fuels combustion for electricity, depending on the biomass feedstock and combustion technologies used. Transportation fuels hydroprocessed from pyrolysis oil show over 60% of GHG reductions compared to petroleum gasoline and diesel. The energy required to produce pyrolysis oil and pyrolysis oil derived biofuels and bioelectricity are mainly from renewable biomass, as opposed to fossil energy. Other environmental benefits include human health, ecosystem quality and fossil resources. The third part of the dissertation addresses the direct land use change (dLUC) impact of forest based biofuels and bioenergy. An intensive harvest of aspen in Michigan is investigated to understand the GHG mitigation with biofuels and bioenergy production. The study shows that the intensive harvest of aspen in MI compared to business as usual (BAU) harvesting can produce 18.5 billion gallons of ethanol to blend with gasoline for the transport sector over the next 250 years, or 32.2 billion gallons of bio-oil by the fast pyrolysis process, which can be combusted to generate electricity or upgraded to gasoline and diesel. Intensive harvesting of these forests can result in carbon loss initially in the aspen forest, but eventually accumulates more carbon in the ecosystem, which translates to a CO2 credit from the dLUC impact. Time required for the forest-based biofuels to reach carbon neutrality is approximately 60 years. The last part of the dissertation describes the use of depolymerization model as a tool to understand the kinetic behavior of hemicellulose hydrolysis under dilute acid conditions. Experiments are carried out to measure the concentrations of xylose and xylooligomers during dilute acid hydrolysis of aspen. The experiment data are used to fine tune the parameters of the depolymerization model. The results show that the depolymerization model successfully predicts the xylose monomer profile in the reaction, however, it overestimates the concentrations of xylooligomers.

Engineering design of an integrated sustainable process system for cassava biobased materials

Cassava contributes significantly to biobased material development. Conventional approaches for its bio-derivative-production and application cause significant wastes, tailored material development challenges, with negative environmental impact and application limitations. Transforming cassava into sustainable value-added resources requires redesigning new approaches. Harnessing unexplored material source, and downstream process innovations can mitigate challenges. The ultimate goal proposed an integrated sustainable process system for cassava biomaterial development and potential application. An improved simultaneous release recovery cyanogenesis (SRRC) methodology, incorporating intact bitter cassava, was developed and standardized. Films were formulated, characterised, their mass transport behaviour, simulating real-distribution-chain conditions quantified, and optimised for desirable properties. Integrated process design system, for sustainable waste-elimination and biomaterial development, was developed. Films and bioderivatives for desired MAP, fast-delivery nutraceutical excipients and antifungal active coating applications were demonstrated. SRRC-processed intact bitter cassava produced significantly higher yield safe bio-derivatives than peeled, guaranteeing 16% waste-elimination. Process standardization transformed entire root into higher yield and clarified colour bio-derivatives and efficient material balance at optimal global desirability. Solvent mass through temperature-humidity-stressed films induced structural changes, and influenced water vapour and oxygen permeability. Sevenunit integrated-process design led to cost-effectiveness, energy-efficient and green cassava processing and biomaterials with zero-environment footprints. Desirable optimised bio-derivatives and films demonstrated application in desirable in-package O2/CO2, mouldgrowth inhibition, faster tablet excipient nutraceutical dissolutions and releases, and thymolencapsulated smooth antifungal coatings. Novel material resources, non-root peeling, zero-waste-elimination, and desirable standardised methodology present promising process integration tools for sustainable cassava biobased system development. Emerging design outcomes have potential applications to mitigate cyanide challenges and provide bio-derivative development pathways. Process system leads to zero-waste, with potential to reshape current style one-way processes into circular designs modelled on nature's effective approaches. Indigenous cassava components as natural material reinforcements, and SRRC processing approach has initiated a process with potential wider deployment in broad product research development. This research contributes to scientific knowledge in material science and engineering process design.

Sustainable pavements for rural scenarios: laboratory and in-situ characterization of recycled materials and innovative construction solutions

Growing need for infrastructure has led to expanding research on advances in road pavement materials. Finding solutions that are sustainable, environmentally friendly and cost-efficient is a priority. Focusing such efforts on low-traffic and rural roads can contribute with a significant progress in the vital circulatory system of transport for rural and agricultural areas. An important alternative material for pavement construction is recycled aggregates from solid wastes, including waste from civil engineering activities, mainly construction and demolition. A literature review on studies is made; it is performed a planned set of laboratory testing procedures aimed to fully characterize and assess the potential in-situ mechanical performance and chemical impact. Furthermore, monitoring the full-scale response of the selected materials in a real field construction site, including the production, laying and compaction operations. Moreover, a novel single-phase solution for the construction of semi-flexible paving layers to be used as alternative material to common concrete and bituminous layers is experimented and introduced, aiming the production and laying of a single-phase laid material instead of a traditional two phases grouted macadam. Finally, on a parallel research work for farming pavements, the possible use of common geotechnical anti-erosive products for the improvement of soil bearing capacity of paddock areas in cattle husbandries of bio-farms is evaluated. this thesis has clearly demonstrated the feasibility of using the sustainable recycled aggregates for low-traffic rural roads and the pavements of farming and agriculture areas. The pavement layers constructed with recycled aggregates provided satisfying performance under heavy traffic conditions in experimental pavements. This, together with the fact that these aggregates can be available in most areas and in large quantities, provides great impetus towards shifting from traditional materials to more sustainable alternatives. The chemical and environmental stability of these materials proves their soundness to be utilized in farming environments.