Making consistent contacts to graphene: effect of architecture and growth induced defects

The effects of contact architecture, graphene defect density and metal-semiconductor work function difference on the resistivity of metal-graphene contacts have been investigated. An architecture with metal on the bottom of graphene is found to yield resistivities that are lower, by a factor of four, and most consistent as compared to metal on top of graphene. Growth defects in graphene film were found to further reduce resistivity by a factor of two. Using a combination of method and metal used, the contact resistivity of graphene has been decreased by a factor of 10 to 1200. +/-. 250 Omega mu m using palladium as the contact metal. While the improved consistency is due to the metal being able to contact uncontaminated graphene in the metal on the bottom architecture, lower contact resistivities observed on defective graphene with the same metal are attributed to the increased number of modes of quantum transport in the channel.

High-Strength Composite Fibers: Realizing True Potential of Carbon Nanotubes in Polymer Matrix through Continuous Reticulate Architecture and Molecular Level Couplings

Carbon nanotubes have unprecedented mechanical properties as defect-free nanoscale building blocks, but their potential has not been fully realized in composite materials due to weakness at the interfaces. Here we demonstrate that through load-transfer-favored three-dimensional architecture and molecular level couplings with polymer chains, true potential of CNTs can be realized in composites as Initially envisioned. Composite fibers with reticulate nanotube architectures show order of magnitude improvement in strength compared to randomly dispersed short CNT reinforced composites reported before. The molecular level couplings between nanotubes and polymer chains results in drastic differences in the properties of thermoset and thermoplastic composite fibers, which indicate that conventional macroscopic composite theory falls to explain the overall hybrid behavior at nanoscale.

Design and evaluation of an optical switching node

[EN]For a good development of elastic optical networks, the design of flexible optical switching nodes is required. This work analyses the previously proposed flexible architectures and, based on the most appropriate, which is the Architecture on Demand (AoD), proposes a specific configuration of the node that includes spatial and spectral switching and the wavelength conversion functionality with a low blocking probability and the minimum amount of modules; the characteristics of the traffic that the designed node is able to cope with are specified in the last chapter. An evaluation of the designed node is also done, and, compared to the other architectures, it is shown that the Architecture on Demand gives better results than others and that it has a higher potential for future developments.

4th European Conference on Energy Efficiency and Sustainability in Architecture and Planning : Donostia-San Sebastián, 1-3 Julio 2013

XXXII Cursos de Verano de la UPV/EHU

5th European Conference on Energy Efficiency and Sustainability in Architecture and Planning : Donostia-San Sebastián, 7-9 Julio 2014

XXXIII Cursos de Verano de la UPV/EHU

6th European Conference on Energy Efficiency and Sustainability in Architecture and Planning

[ES]Esta obra recoge las comunicaciones seleccionadas para el 6º Congreso Europeo sobre Eficiencia Energética y Sostenibilidad en Arquitectura, organizado por el grupo de investigación Calidad de Vida en Arquitectura de la Universidad del País Vasco/Euskal Herriko Unibertsitatea. El congreso, que se celebra en el marco de los XXXIV Cursos de Verano de la UPV/EHU, aborda en esta cuarta edición el tema “Ciudades en riesgo: resiliencia y redundancia”. Alrededor de este tema general se desarrollan cinco ponencias magistrales, a cargo de Margaretha Breil (Centro Euro-Mediterráneo para el Cambio Climático), Cristina Garzillo Leemhuis (ICLEI), Ignasi Fontanals (OptiCits), Juan Carlos Barrios Montenegro (Global Action Plan) y Manuel Valdés López (Ajuntament de Barcelona). Además, 24 comunicaciones seleccionadas por el comité científico presentarán trabajos de investigaciones actuales en las sesiones orales y póster. Es objetivo paralelo del congreso es fortalecer las líneas de investigación en eficiencia energética y sostenibilidad de los grupos de investigación y formación de la UPV/ EHU comprometidos con esta propuesta, con objeto de colaborar en el reforzamiento de la I D i en su ámbito de conocimiento y apoyar la apuesta específica de los Gobiernos Central y Vasco, así como de otras instituciones nacionales e internacionales respecto a las actividades de I D i en las materias relacionadas con el cambio climático, la eficiencia energética y la sostenibilidad ambiental [ENG] This work contains the selected abstracts of the 6th European Conference on Energy Efficiency and Sustainability in Architecture and Planning, organized by the research group Quality of life in Architecture of the University of the Basque Country. The conference is part of the XXXIV Summer Courses of the UPV/EHU and deals, in its fourth edition, with the topic “Cities at risk: resilience and redundancy”. Around this general theme there are five invited speakers: Margaretha Breil (Euro-Mediterranean Centre for Climate Change), Cristina Garzillo Leemhuis (ICLEI), Ignasi Fontanals (OptiCits), Juan Carlos Barrios Montenegro (Global Action Plan) y Manuel Valdés López (Barcelona City Council). 24 abstracts additional have been selected by the scientific committee that offer actual research works in presentations and posters. The purpose of the conferences is to strengthen the investigation lines in energy efficiency and sustainability of the research and education groups of the University of the Basque Country (UPV/EHU) involved, with the purpose of collaborating in the reinforcement of the I D i in its field of knowledge, and support the specific projects of the Central and Basque Governments, as well as other national and international institutions related to the I Di activities in similar fields of climate change, energy efficiency and environmental sustainability.

System architecture and deployment scenarios for SESAME: Small cEllS coordinAtion for Multi-tenancy and Edge services

The surge of the Internet traffic with exabytes of data flowing over operators mobile networks has created the need to rethink the paradigms behind the design of the mobile network architecture. The inadequacy of the 4G UMTS Long term Evolution (LTE) and even of its advanced version LTE-A is evident, considering that the traffic will be extremely heterogeneous in the near future and ranging from 4K resolution TV to machine-type communications. To keep up with these changes, academia, industries and EU institutions have now engaged in the quest for new 5G technology. In this paper we present the innovative system design, concepts and visions developed by the 5G PPP H2020 project SESAME (Small cEllS coordinAtion for Multi-tenancy and Edge services). The innovation of SESAME is manifold: i) combine the key 5G small cells with cloud technology, ii) promote and develop the concept of Small Cellsas- a-Service (SCaaS), iii) bring computing and storage power at the mobile network edge through the development of nonx86 ARM technology enabled micro-servers, and iv) address a large number of scenarios and use cases applying mobile edge computing. Topics:

Pipeline Architecture and Parallel Computation-Based Real-Time Stereovision Tracking System for Surgical Navigation

This paper studies the development of a real-time stereovision system to track multiple infrared markers attached to a surgical instrument. Multiple stages of pipeline in field-programmable gate array (FPGA) are developed to recognize the targets in both left and right image planes and to give each target a unique label. The pipeline architecture includes a smoothing filter, an adaptive threshold module, a connected component labeling operation, and a centroid extraction process. A parallel distortion correction method is proposed and implemented in a dual-core DSP. A suitable kinematic model is established for the moving targets, and a novel set of parallel and interactive computation mechanisms is proposed to position and track the targets, which are carried out by a cross-computation method in a dual-core DSP. The proposed tracking system can track the 3-D coordinate, velocity, and acceleration of four infrared markers with a delay of 9.18 ms. Furthermore, it is capable of tracking a maximum of 110 infrared markers without frame dropping at a frame rate of 60 f/s. The accuracy of the proposed system can reach the scale of 0.37 mm RMS along the x- and y-directions and 0.45 mm RMS along the depth direction (the depth is from 0.8 to 0.45 m). The performance of the proposed system can meet the requirements of applications such as surgical navigation, which needs high real time and accuracy capability.

Pipeline Architecture and Parallel Computation-Based Real-Time Stereovision Tracking System for Surgical Navigation

This paper studies the development of a real-time stereovision system to track multiple infrared markers attached to a surgical instrument. Multiple stages of pipeline in field-programmable gate array (FPGA) are developed to recognize the targets in both left and right image planes and to give each target a unique label. The pipeline architecture includes a smoothing filter, an adaptive threshold module, a connected component labeling operation, and a centroid extraction process. A parallel distortion correction method is proposed and implemented in a dual-core DSP. A suitable kinematic model is established for the moving targets, and a novel set of parallel and interactive computation mechanisms is proposed to position and track the targets, which are carried out by a cross-computation method in a dual-core DSP. The proposed tracking system can track the 3-D coordinate, velocity, and acceleration of four infrared markers with a delay of 9.18 ms. Furthermore, it is capable of tracking a maximum of 110 infrared markers without frame dropping at a frame rate of 60 f/s. The accuracy of the proposed system can reach the scale of 0.37 mm RMS along the x- and y-directions and 0.45 mm RMS along the depth direction (the depth is from 0.8 to 0.45 m). The performance of the proposed system can meet the requirements of applications such as surgical navigation, which needs high real time and accuracy capability.

Guest inducing p-sulfonatocalix[4] arene into three-dimensional capsule architecture and a mixed A-B double layer framework

The reactions of sodium p-sulfonatocalix[4]arene (Na5L) and terbium/europium(III) chloride in the presence of pyrazine-N,N'-dioxide (PNNO) in aqueous solutions gave the crystalline complexes 1 and 2. Both structures contain molecular capsules of p-sulfonatocalix[4] arene with PNNO as guest molecules in the cavity of the calix[4]arenes. The molecular capsules are connected through sodium and terbium (or europium) centers forming a three-dimensional framework.

Self-assembled 3D microflowery In(OH)(3) architecture and its conversion to In2O3

Using sodium dodecyl sulfate (SDS), a 3D microflowery indium hydroxide [In(OH)(3)] structure assembled from 2D nanoflakes was fabricated in a large quantity via a hydrothermal approach at relative low temperature. The obtained In(OH)(3) flowers exhibited a narrow size range between 4 and 6 mu m. The properties of these composites were characterized by XRD, EDX, FE-SEM, TEM, SAED, and TGA. In this work, both the use of urea and SDS and the amounts of these components played important roles in the formation of In(OH)3 with different nanostructures.