745 resultados para Bicycles -- Tires
Resumo:
Contexte : Les interventions sur l'environnement bâti reliées au transport peuvent contribuer à l'augmentation de la pratique de l'activité physique. En tant qu’intervention, les programmes de vélos en libre-service (PVLS) peuvent contribuer à l’utilisation du vélo. BIXI© (nom qui fusionne les mots BIcyclette et taXI) est un programme de vélos en libre-service implanté à Montréal, au Canada, en mai 2009. Le programme BIXI© met à la disposition des gens 5050 vélos à 405 bornes d’ancrage. Objectif : L'objectif général de cette thèse est d'étudier l'impact d'un programme de vélos en libre-service sur l’utilisation du vélo. Les objectifs spécifiques de la thèse sont de : 1) Estimer la prévalence populationnelle et identifier des variables environnementales, sociodémographiques et comportementales associées à l’utilisation des vélos en libre-service. 2) Estimer l’impact populationnel de l’implantation des vélos en libre-service sur l’utilisation du vélo et les contributions respectives de l’utilisation du vélo pour des fins utilitaires et récréatives à l’utilisation totale du vélo. 3) Estimer l’impact local de l’implantation des vélos en libre-service sur l’utilisation du vélo. Méthodes : Un devis populationnel transversal avec mesures répétées. Des enquêtes ont été réalisées au moment du lancement du programme de vélos en libre-service (4 mai au 10 juin, 2009), à la fin de la première année d’implantation (8 octobre au 12 décembre, 2009), et à la fin de la deuxième année d’implantation (8 novembre au 12 décembre, 2010). Les échantillons se composaient de 2001 (âge moyen = 49,4 années, 56,7 % de femmes), 2502 (âge moyen = 47,8 ans, 61,8 % de femmes) et 2509 (âge moyen = 48,9 années, 59,0 % de femmes) adultes à chaque période de mesure respectivement. Résultats : Globalement, les résultats démontrent le potentiel des PVLS pour augmenter l’utilisation du vélo. Les résultats suggèrent que près de 128 744 habitants ou 8,1 % de la population adulte ont utilisé les vélos BIXI© au moins une fois dans la première saison. Après deux ans d’implantation, ceux qui sont exposés à BIXI© dans leur milieu résidentiel avaient une probabilité significativement plus élevée d’utiliser le vélo par rapport à ceux non exposés. Par contre, il n'y avait aucun impact local de l’implantation du programme BIXI© sur l’utilisation du vélo. Conclusions : L’implantation d'un PVLS à Montréal a augmenté la probabilité d’utiliser le vélo chez les individus habitant près d'une borne d'ancrage. Mots clés : programme de vélos en libre-service, expérience naturelle, santé des populations.
Resumo:
Esboza las principales características y los usos apropiados de las bicicletas como forma de transporte contestando preguntas como qué es una bicicleta, qué aspecto tiene, cómo eran hace tiempo, qué es una bicicleta de carreras, qué es una biclicleta MBX,qué es una bicicleta de montaña. Diseñado para ayudar a concentrarse y aprendera formularlas propias preguntas sobre el mundo que nos rodea. Tiene un glosario.
Resumo:
David Arnold who retired this year as the Professor of Asian and Global History at the University of Warwick remains one of the most prolific historians of colonial medicine and modern South Asia. A founding member of the subaltern studies collective, he is considered widely as a pioneer in the histories of colonial medicine, environment, penology, hunger and famines within South Asian studies and beyond. In this interview he recalls his formative inspirations, ideological motivations and reflects critically on his earlier works, explaining various shifts as well as map- ping the possible course of future work. He talks at length about his forthcoming works on everyday technology, food and monsoon Asia. Finally, he shares with us his desire of initiating work on an ambitious project about the twin themes of poison and poverty in South Asian his- tory, beginning with the Bengal famine in the late eighteenth century and ending with the Bhopal gas tragedy of the early 1980s. This conversation provides insights into the ways in which the field of medical history in modern South Asia has been shaped over the past three decades through interactions with broader discussions on agency, resistance, power, everydayness, subal- tern studies, global and spatial histories. It hints further at the newer directions which are being opened up by such persisting intellectual entanglements.
Resumo:
Analysis of experimental interlocking blocks of concrete with addition of residues of process the tires retreading production. With the population growth in recent years, industry in general has adjusted itself to resulting demand. the industry of tire retreading generates residues that have been discarded without any control. this adds to environmental pollution and promotes the proliferation of vectors harmful to health, aiming to find an application for this type of residues, this study presents experimental results to interlocking concrete block pavements, with addition of residues tires, interlocking blocks were built up and we determined, through laboratory tests, the need to set the mark that provide greater return regarding analyzed characteristics, there are four types of dosage of concrete with residues tires. We accomplished tests of compression strength, water absorption and resistance to impact. Through the preliminary results, we verified that are satisfactory, confirming the possibility of applying this type of interlocking block in environments with low demand, which would bring the economy of natural sources of aggregates, beyond ecological benefits through the reuse of residues from retreading of tires.
Resumo:
Extensive field testes were conducted using the UCD single wheel tester employing three large radial ply tractor tires in two different soils, four different soil conditions, two axle load levels, and three levels of tire inflation pressures in order to quantify the benefits of using low/correct inflation pressures. During these tests slip, net traction, gross traction, and dynamic axle load were recorded. Furthermore, soil moisture content, cone index, and dry bulk density data were obtained at test locations. The results of the analysis showed a significant increase in net traction and traction efficiency when low/correct inflation was used. Benefits of using low/correct pressure was higher in tilled soil conditions.
Resumo:
The search for an adequate destination to the tires without use is a problem for many countries. The use of tire rubber in concrete through the partial substitution of the small aggregate has for objective the withdrawal of this material of the environment besides serving as alternative material in places that present sand scarcity. However, to use this type of concrete in civil construction it's necessary to verify its structural behavior. The behavior of the adherence enters the bar of armor and the concrete surrounding it has decisive importance with relation to the load capacity of the structures of reinforced concrete. In this context, this work presents, argues and evaluates the results of the experimental studies for determination of the adherence tension according to pulling up assays pull-out normalized for CEB RC6 and also related in the ASTM C-234 in concrete with and without rubber residues. Armors of nominal diameter of 10,0; 12,5 and 16 mm had been used and concrete contend 10% of rubber fibres in substitution to the sand in volume.
Resumo:
Analyses how the bicycle has evolved as a form of transport and outlines a bicycle traffic scheme. It provides examples showing that bicycles are a valid alternative to cars and can be integrated into a transport chain.
Resumo:
The paper discusses the application of High Strength Concrete (HSC) technology for concrete production with the incorporation of Rice Husk Ash (RHA) residues by replacing a bulk of the material caking and rubber tires with partial aggregate volume, assessing their influence on the mechanical properties and durability. For concrete with RHA and rubber, it was possible to reduce the brittleness by increasing the energy absorbing capacity. With respect to abrasion, the RHA and rubber concretes showed lower mass loss than the concrete without residues, indicating that this material is attractive to be used in paving. It is thus hoped that these residues may represent a technological and ecological alternative for the production of concrete in construction works.
Resumo:
The lateral characteristics of tires in terms of lateral forces as a function of sideslip angle is a focal point in the prediction of ground loads and ground handling aircraft behavior. However, tests to validate such coefficients are not mandatory to obtain Aircraft Type Certification and so they are not available for ATR tires. Anyway, some analytical values are implemented in ATR calculation codes (Flight Qualities in-house numerical code and Loads in-house numerical code). Hence, the goal of my work is to further investigate and validate lateral tires characteristics by means of: exploitation and re-parameterization of existing test on NLG tires, implementation of easy-handle model based on DFDR parameters to compute sideslip angles, application of this model to compute lateral loads on existing flight tests and incident cases, analysis of results. The last part of this work is dedicated to the preliminary study of a methodology to perform a test to retrieve lateral tire loads during ground turning with minimum requirements in terms of aircraft test instrumentation. This represents the basis for future works.
Resumo:
Finite element tire modeling can be a challenging process, due to the overall complexities within the tire and the many variables that are required to produce capable predictive simulations. Utilizing tools from Abaqus finite element software, adequate predictive simulations that represent actual operational conditions can be made possible. Many variables that result from complex geometries and materials, multiple loading conditions, and surface contact can be incorporated into modeling simulations. This thesis outlines modeling practices used to conduct analysis on specific tire variants of the STL3 series OTR tire line, produced by Titan Tire. Finite element models were created to represent an inflated tire and rim assembly, supporting a 30,000 lb load while resting on a flat surface. Simulations were conducted with reinforcement belt cords at variable angles in order to understand how belt cord arrangement affects tire components and stiffness response.
Resumo:
par J. G. H. Greppo
Resumo:
imité de l'hébreu par A. ben Baruch Créhange ; [illustré par Haguental et Fagonde]
Resumo:
[Gottfried Wilhelm Leibniz]
Resumo:
de l'Academie imperiale des sciences de St.-Petersbourg
Resumo:
arr. par Stumpf