Meristic variation in Sebastes (Scorpaenidae), with an analysis of character association and bilateral pattern and their significance in species separation

This report presents meristic data for nearly all of the known species of Sebasles. Rudimentary caudal ray counts tend to be higher in more active species. The number of caudal rays supported by the hypurals is consistently 14, whereas the number of branched caudal rays varies between 11 and 13. Vertebral counts and most fin-ray counts tend to be lower in species or populations in warmer latitudes, except for pectoral ray counts which tend to have an opposite geographic pattern. On the basis of the small magnitude of meristic and morphometric differences and the lack of other differences between northern and southern samples of "Sebasles caurinus," Sebaslichlhys vexillaris Jordan and Gilbert is regarded as a junior synonym of Sebasles caurinus Richardson. The patterns of bilateral variation in paired meristics are analyzed and their mechanism discussed. The frequency distribution of pectoral ray counts in their right-left combination is shown to be useful in species separation. No association was found between any combination of two meristic features in any species. The author proposes that intrasample associations between meristic features are evidence of sampling heterogeneity. (PDF file contains 21 pages.)

The intestine as a diagnostic character in identifying certain clupeoids (Engraulididae, Clupeidae, Dussumieriidae) and as a morphometric character for comparing anchoveta (Centengraulis mysticetus) populations

ENGLISH: The several species of clupeoid fishes used as baitfish in the Eastern Pacific tuna fishery are, in some cases, sufficiently similar to make identification difficult. During a review of the anatomy of the intestine of clupeoid fishes it was observed that the morphology of the intestine is sometimes a useful character in the identification of systematic groups. The genera at least can be distinguished by means of the topographical anatomy of the intestines. This also may be a useful character because it is often found that a species occurs in the same area as another species that may be confused with it on external inspection, although it belongs to a different genus. SPANISH: La gran similitud morfológica de varias especies del órden Clupeoidea usadas como cebo en la pesquería de atún del Pacifíco Oriental, hace que su identificación sea en algunos casos difícil. Al realizar una revisión anatómica del intestino de los peces clupeoides, se observó que la morfología del mismo es a veces un carácter útil para la identificación de los diversos grupos sistemáticos. Al menos los géneros pueden ser distinguidos por medio de la anatomía topográfica de los intestinos. Esto también puede ser un carácter útil, puesto que a menudo dos especies pertenecientes a géneros diferentes y que ocupen la misma área, pueden ser confundidos si nos basamos solamente en la morfología externa. (PDF contains 24 pages.)

Generating artificial homologous proteins according to the representative family character in molecular mechanics properties - an attempt in validating an underlying rule of protein evolution

The molecular mechanics property is the foundation of many characters of proteins. Based on intramolecular hydrophobic force network, the representative family character underlying a protein’s mechanics property is described by a simple two-letter scheme. The tendency of a sequence to become a member of a protein family is scored according to this mathematical representation. Remote homologs of the WW-domain family could be easily designed using such a mechanistic signature of protein homology. Experimental validation showed that nearly all artificial homologs have the representative folding and bioactivity of their assigned family. Since the molecular mechanics property is the only consideration in this study, the results indicate its possible role in the generation of new members of a protein family during evolution.

A model for energy and morphology of crystalline grain boundaries with arbitrary geometric character

It has been well-established that interfaces in crystalline materials are key players in the mechanics of a variety of mesoscopic processes such as solidification, recrystallization, grain boundary migration, and severe plastic deformation. In particular, interfaces with complex morphologies have been observed to play a crucial role in many micromechanical phenomena such as grain boundary migration, stability, and twinning. Interfaces are a unique type of material defect in that they demonstrate a breadth of behavior and characteristics eluding simplified descriptions. Indeed, modeling the complex and diverse behavior of interfaces is still an active area of research, and to the author's knowledge there are as yet no predictive models for the energy and morphology of interfaces with arbitrary character. The aim of this thesis is to develop a novel model for interface energy and morphology that i) provides accurate results (especially regarding "energy cusp" locations) for interfaces with arbitrary character, ii) depends on a small set of material parameters, and iii) is fast enough to incorporate into large scale simulations.

In the first half of the work, a model for planar, immiscible grain boundary is formulated. By building on the assumption that anisotropic grain boundary energetics are dominated by geometry and crystallography, a construction on lattice density functions (referred to as "covariance") is introduced that provides a geometric measure of the order of an interface. Covariance forms the basis for a fully general model of the energy of a planar interface, and it is demonstrated by comparison with a wide selection of molecular dynamics energy data for FCC and BCC tilt and twist boundaries that the model accurately reproduces the energy landscape using only three material parameters. It is observed that the planar constraint on the model is, in some cases, over-restrictive; this motivates an extension of the model.

In the second half of the work, the theory of faceting in interfaces is developed and applied to the planar interface model for grain boundaries. Building on previous work in mathematics and materials science, an algorithm is formulated that returns the minimal possible energy attainable by relaxation and the corresponding relaxed morphology for a given planar energy model. It is shown that the relaxation significantly improves the energy results of the planar covariance model for FCC and BCC tilt and twist boundaries. The ability of the model to accurately predict faceting patterns is demonstrated by comparison to molecular dynamics energy data and experimental morphological observation for asymmetric tilt grain boundaries. It is also demonstrated that by varying the temperature in the planar covariance model, it is possible to reproduce a priori the experimentally observed effects of temperature on facet formation.

Finally, the range and scope of the covariance and relaxation models, having been demonstrated by means of extensive MD and experimental comparison, future applications and implementations of the model are explored.

On the character of the phytoplankton of the Yakimvarskii Gulf (Lake Ladoga) [Translation from: Botanicheskii Zhurnal, T. 44, No. 9, 1311-1314, 1959]

The Laboratory of Lake Studies of the Academy of Sciences of the USSR in 1956 undertook this complicated study of Lake Ladoga. The plan of the laboratory made allowance for the detailed investigation of the phytoplankton of the lake during a series of years. In the present article are given the preliminary results of observations on the phytoplankton of the Yakimvarskii Bay from 1956 to 1957. Details are also given on the concentration of dissolved gases and biogenic substances of the bay.

Deus, o diabo e a televisão: mídia moderna de massa e pentecostalismo em uma comunidade evangélica da Ilha Grande

O foco desta dissertação é a relação entre Pentecostalismo e a tecnologia televisiva na vila de Provetá, uma comunidade evangélica situada na Ilha Grande, município de Angra dos Reis, Estado do Rio de Janeiro. Os residentes de Provetá são majoritariamente membros da Igreja Pentecostal Assembléia de Deus, situada ali desde princípios da década de 1930. A televisão, em contraste, fora introduzida na vila apenas em 1987, mediante o acesso a antenas parabólicas. O objetivo central da dissertação é compreender o processo histórico e social de inserção da tecnologia televisiva na vila de Provetá, e como esta tecnologia se relaciona com mídias e práticas Pentecostais de mediação com o transcendental. Condenada num primeiro momento pelo então pastor presidente da Assembléia de Deus como uma tecnologia exclusivamente diabólica e portanto, irrevogavelmente proibida aos membros da igreja , a televisão fora progressivamente ressignificada pelas lideranças da igreja como uma tecnologia ambivalente, a partir da qual tanto Deus quanto o Diabo seriam capazes de operar. A dissertação explora, nesse sentido, o processo de negociação em torno dos significados religiosos atribuídos à televisão, bem como os regimes normativos relativos ao seu consumo. Dado o status ambivalente da tecnologia televisiva aos olhos das lideranças contemporâneas da igreja seu potencial de estar a serviço de Deus ou do Diabo, do bem ou do mal , busco compreender uma ética do assistir que parece subjazer o processo de autorização do consumo da televisão, isto é, como um crente deve assisti-la. Assistir à televisão de forma eticamente apropriada, portanto, implicaria um conhecimento essencial sobre como assistir. Este conhecimento, argumento, é o conhecimento da Bíblia. Mediante um regime de verdade bíblico, os provetaenses traçariam uma distinção fundamental em relação aos conteúdos televisivos considerados factuais ou reais, cujo consumo seria inofensivo ou benéfico, e aqueles considerados forjados, encenados ou construídos, cujo consumo seria inapropriado, ou ainda perigoso. Partindo da identificação das telenovelas da Rede Globo como mentiras de natureza diabólica, e do telejornal como um espaço de aprendizado para o crente, empreendo uma análise de recepção destes programas, buscando compreender as dinâmicas simbólicas e sensoriais de identificação das presenças e das agências de Deus e do Diabo através da televisão. O argumento central a ser desenvolvido na dissertação é o de que a experiência de assistir à televisão em Provetá encontra-se estruturada por uma estética Pentecostal fomentada a partir da Bíblia. A partir das práticas religiosas de mediação centradas na Bíblia, um regime sensorial Pentecostal fora progressivamente constituído: uma dada gramática do sentir os objetos da experiência em relação ao regime de verdade Bíblico. Têm-se, desse modo, uma dinâmica circular no interior da qual imagens são experimentadas sensivelmente a partir do prisma da verdade Bíblica, e tais sensações, por sua vez, objetificam a realidade dessa verdade no corpo do sujeito. Nessa dialética entre o crer e o sentir, a experiência sensível de assistir à televisão é informada por um entendimento Pentecostal da realidade, e esse entendimento é autenticado por aquilo que é sentido.

Syllable language models for Mandarin speech recognition: exploiting character language models.

Mandarin Chinese is based on characters which are syllabic in nature and morphological in meaning. All spoken languages have syllabiotactic rules which govern the construction of syllables and their allowed sequences. These constraints are not as restrictive as those learned from word sequences, but they can provide additional useful linguistic information. Hence, it is possible to improve speech recognition performance by appropriately combining these two types of constraints. For the Chinese language considered in this paper, character level language models (LMs) can be used as a first level approximation to allowed syllable sequences. To test this idea, word and character level n-gram LMs were trained on 2.8 billion words (equivalent to 4.3 billion characters) of texts from a wide collection of text sources. Both hypothesis and model based combination techniques were investigated to combine word and character level LMs. Significant character error rate reductions up to 7.3% relative were obtained on a state-of-the-art Mandarin Chinese broadcast audio recognition task using an adapted history dependent multi-level LM that performs a log-linearly combination of character and word level LMs. This supports the hypothesis that character or syllable sequence models are useful for improving Mandarin speech recognition performance.

Phylogenetic relationships of the Chinese cyprinid genus Rhinogobio Bleeker (Teleostei : Cyprinidae) based on sequences of the mitochondrial DNA control region, with comments on character adaptations

Rhinogobio is a cyprinid genus restricted to the river drainages of China. Sequences of the mitochondrial DNA control region were determined for four Rhinogohio species and one outgroup species, Coreius heterodon, to investigate the phylogenetic relationships within the genus. The control region of the Rhinogobio species ranges from 922 to 930 base pairs and comprises 930 base pairs in Coreius. Our phylogenetic analysis indicates two distinct lineages in the genus Rhinogobio. The first includes only R. ventralis. In the second lineage there are three species, two closely related species R. cylindricus and R. hunanensis, and their sister species R. typus. An analysis of character adaptations suggests an evolutionary trend in this genus towards a relatively lower body and caudal peduncle depth, a shorter dorsal fin, and a more anterior anus. In addition, there is a trend towards shorter barbels and relatively larger eyes. Some or all of these traits may be associated with a habitat shift from fast-flowing turbid rivers to slower-flowing clear river habitats.

The structural and photoluminescence character of InAs quantum dots grown on a combined InAlAs and GaAs strained buffer

The structural and photoluminescence (PL) properties of the InAs quantum dots (QDs) grown on a combined InAlAs and GaAs strained buffer layer have been investigated by AFM and PL measurements. The dependence of the critical thickness for the transition from 2D to 3D on the thickness of GaAs layer is demonstrated directly by RHEED. The effects of the introduced-InAlAs layer on the density and the aspect ratio of QDs have been discussed.