Estatísticas de avaliação da precisão experimental em ensaios de cultivares de milho

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Exigências de uma semeadora-adubadora de precisão variando a velocidade e a condição da superfície do solo

O objetivo do trabalho foi avaliar o desempenho de um conjunto trator-semeadora-adubadora de quatro linhas, variando as marchas do trator e preparo do solo. A semeadura foi realizada em Latossolo Vermelho Eutroférrico. Os tratamentos foram: preparo do solo (convencional, reduzido e plantio direto) e marchas do trator (5,9km h-1 e 7,0km h-1), em delineamento de blocos casualizados em fatorial 3 x 2 com quatro repetições. Foram analisadas: velocidade de deslocamento, capacidade de campo operacional, consumo de combustível horário e por área, patinagem, força de tração e potência na barra. A velocidade, a patinagem e os consumos de combustível horário e por área foram maiores para a marcha M2 (7,0km h-1) e o conjunto trabalhando em área cujo preparo do solo foi realizado com escarificador apresentou maiores valores para os consumos de combustível horário e por área e também menor velocidade operacional.

Efeito de parâmetros analíticos sobre a precisão de métodos de extração de zinco do solo

Fifteen soil samples and four extradants (DTPA, Na 2EDTA, HCl and Mehlich 1) were used to study soil extraction methods for available zinc. Each extradant was studied in three soil:solution ratios (1:2, 1:4 and 1:10) and in three extraction periods in the ratio most frequently used. The zinc extracted by DTPA, Na 2EDTA and HCl was not affected by use of soil:solution ratios 1:2 and 1:4, but the amount extracted increased with the 1:10 ratio. In this relation, the variation coefficients increased. With Mehlich, no definite tendency was observed. The increase of extraction period for DTPA extractant, in 1:2 ratio, had little effect on the amount of zinc extracted and on the precision. As to Na 2EDTA extractant in 1:10 ratio, with the increase of extraction time, both increased. As to HCl and Mehlich, both in 1:4 ratio, the increase in extraction period had no effect on the amount of zinc extracted and no definite effect on the precision. Thus, the use of 1:2 ratio for DTPA and Na 2EDTA and 1:4 ratio for acid extractants is recommended. Concerning the period of extraction, 120 min should be used with DTPA and Na 2EDTA, 15 min with HCl and 5 min with Mehlich.

Posicionamento por ponto de alta precisão utilizando o GPS: Uma solução para a geodinâmica

Point positioning from GPS data can provide precision varying from 100 meters to a few millimeters at the level of 95% probability. To reach the best level of accuracy, users need proper equipment and software, as well as access capability to GPS products available at the International GPS Geodynamics Service. In this paper, the theory related to point positioning using GPS is presented as well as the results of an experiment conducted using data from the Brazilian Active Control System. The results show repeatability better than 5mm and 10mm for the N and E baseline components respectively, and 6mm + 4ppb (parts per billion) for the vertical. Comparison with SIRGAS campaign showed results at the same level of uncertainty as that of the stations used to tie the SIRGAS frame to ITRF94. Therefore, precise point positioning is a powerful tool to be used in applications requiring high level of precision, such as Geodynamics.

Precisão de plantas planialtimétricas em função do posicionamento de pontos em irradiadas de campo

The present experiment aimed to study the influence of point positioning in an irradiated field to produce a planialtimetric plant. A planialtimetric evaluation was carried out in a 14-acre experimental area with well-defined topographic variations. Planialtimetric maps were designed using manual procedures, Datageosis and Topoesalq. Datageosis built all the curves after numerical surface modeling. Topoesalq provided only height reports and the drawing of curves was done manually. The third method was a manual procedure. Because there were planialtimetry representation differences, longitudinal profiles were used in the sites where there was a great divergence among plants. When obtained profiles and plants were compared, it was verified that the one produced by Datageosis represented the relief plant better. Later, only the irradiated field points were evaluated and each point presented positioned readings before and after each relief map variation. The processing through the three methods resulted in significant plants of the local planialtimetry, according to the control profiles. It was concluded that the planning of the field procedure should be suitable to the posterior treatment method of obtained data in order to make a planialtimetric plant to accord to the evaluated local topography.

Avaliação de interpoladores estatísticos e determinísticos na estimativa de atributos do solo em agricultura de precisão

The obtaining of the correct space distribution for attributes of the soil is relevant in the agricultural planning, in what concerns to the installation and maintenance of the cultures. The objective of that work was to compare statistical interpolation methods (ordinary krigagem) and deterministic methods (inverse square distance) in the estimate of CTC and V% in a distrophic yellow-red Latossolo. The study was accomplished in the State of Experimental Hands on of the Instituto Capixaba de Pesquisa, Assistência Técnica e Extensão Rural (INCAPER), in an irregular grading with 109 points. The data were collected in the layer of 0 - 0,20 m in the projection of the cup of the plants, in the superior part of the slope. The performance of the interpolators was obtained and compared using the criterion of the medium mistake. The observations are dependent in space until a maximum reach of 14,1 m, considering the isotropy. IDW presented larger mistake in the estimate of the data; however its difference in relation to KRIG was small for both variables.

Avaliação de sintomas neuropsiquiátricos na demência: Para melhorar a precisão

The issue of this article concerned the discussion about tools frequently used tools for assessing neuropsychiatric symptoms of patients with dementia, particularly Alzheimer's disease. The aims were to discuss the main tools for evaluating behavioral disturbances, and particularly the accuracy of the Neuropsychiatric Inventory - Clinician Rating Scale (NPI-C). The clinical approach to and diagnosis of neuropsychiatric syndromes in dementia require suitable accuracy. Advances in the recognition and early accurate diagnosis of psychopathological symptoms help guide appropriate pharmacological and non-pharmacological interventions. In addition, recommended standardized and validated measurements contribute to both scientific research and clinical practice. Emotional distress, caregiver burden, and cognitive impairment often experienced by elderly caregivers, may affect the quality of caregiver reports. The clinician rating approach helps attenuate these misinterpretations. In this scenario, the NPI-C is a promising and versatile tool for assessing neuropsychiatric syndromes in dementia, offering good accuracy and high reliability, mainly based on the diagnostic impression of the clinician. This tool can provide both strategies: a comprehensive assessment of neuropsychiatric symptoms in dementia or the investigation of specific psychopathological syndromes such as agitation, depression, anxiety, apathy, sleep disorders, and aberrant motor disorders, among others.

Posicionamento por ponto preciso estático e cinemático: implementação e análise

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo comparativo de métodos geoestatísticos aplicados em agricultura de precisão

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Exatidão, precisão e reprodutibilidade de medidas dentárias em modelos de gessso e imagem tridimensional

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Número do tipo ponto flutuante com precisão estendida

Pós-graduação em Engenharia Mecânica - FEIS

Desempenho operacional de semeadora-adubadora de precisão em função do tipo de martelete e velocidade de deslocamento na cultura do milho

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Precisão de planta planialtimétrica gerada por modelagem numérica de superfície a partir de coordenadas UTM plano retangulares coletadas em receptor GPS topográfico

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Variabilidade espacial e correlações entre atributos de solo e produtividade na agricultura de precisão

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Influência da faixa de taxas de deformação na precisão de caracterizações reológicas de fluidos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)