Las habilidades sociales como herramienta en la prevención de riesgos laborales : salud y burn out laboral.

El artículo forma parte del monográfico: Prevención y riesgos laborales del docente

Burn-in policies for products having dormant states

Many systems might have a long time dormant period, during which the systems are not operated. For example, most building services products are installed while a building is constructed, but they are not operated until the building is commissioned. Warranty terms for such products may cover the time starting from their installation times to the end of their warranty periods. Prior to the commissioning of the building, the building services products are protected by warranty although they are not operating. Developing optimal burn-in policies for such products is important when warranty cost is analysed. This paper considers two burn-in policies, which incur different burn-in costs, and have different burn-in effects on the products. A special case about the relationship between the failure rates of the products at the dormant state and at the operating state is presented. Numerical examples compare the mean total warranty costs of these two burn-in policies.

Burn in policies for products having dormant states

Constructing a building is a long process which can take several years. Most building services products are installed while a building is constructed, but they are not operated until the building is commissioned. The warranty term for the building service systems may cover the time starting from their installation to the end of the warranty period. Prior to the commissioning of the building, the building services systems are protected by warranty although they are not operated. The bum in time for such systems is important when warranty costs is analyzed. In this paper, warranty cost models for products with burn in periods are presented. Two burn in policies are developed to optimize the total mean warranty cost. A special case on the relationship between the failure rates of the product at the dormant state and at the I operating state is presented.

Soil CO2 emission and its relation to soil properties in sugarcane areas under Slash-and-burn and Green harvest

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Forest natural regeneration and biomass production after slash and burn in a seasonally dry forest in the Southern Brazilian Amazon

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Nutritional, immunological and microbiological profiles of burn patients

A burn is a lesion on an organic tissue resultant from direct or indirect action of heat on the organism. The present study aimed to evaluate the nutritional, immunological and microbiological status of burn patients at the Bauru State Hospital, São Paulo state, Brazil, in 2007. Eight patients, aged more than 18 years and injured up to 24 hours, were evaluated at the moment of hospitalization and seven days later. All victims were males with a mean age of 38 years. on average, 17.5% of their body surfaces were burned and 50% of the patients were eutrophic. There were significant alterations in levels of erythrocytes, hemoglobin, hematocrit, total protein and albumin due to increased endothelial permeability, direct destruction of proteins in the heat-affected area and blood loss from lesions or debridement. At a second moment, cytokines IL-6 and TNF-alpha had augmented significantly, with IL-6 presenting elevated levels in relation to controls at the first moment. Microbiological analysis showed that 100% of the samples collected at hospital admission were negative and after one week Staphylococcus aureus was found in all cultures. Therefore, a burn patient may be considered immunosuppressed and these results indicate significant nutritional, immunological and microbiological alterations that can interfere in his recovery.

Risk factors for acquisition of Methicillin-resistant Staphylococcus aureus among patients from a burn unit in Brazil

Methicillin-resistant Staphylococcus aureus (MRSA) is an important agent of colonization and infection in burn units. in order to identify risk factors for MRSA acquisition in a Brazilian burn unit, we performed two retrospective studies. In the first ("cohort" study), 175 patients who were not colonized with MRSA on admission were followed to assess risk factors for MRSA acquisition. in the second ("case-case-control" study), 143 individuals from the previous study who were negative for both MRSA and Methicillin-susceptible S. aureus (MSSA) on admission were followed. Case-control studies were performed to investigate risk factors for MRSA and MSSA acquisition. MRSA and MSSA were recovered from 75 and 23 patients, respectively. In the "cohort" study, only the number of wound excisions (Odds Ratio [OR] = 1.55, 95% Confidence Interval [CI] = 1.21-1.98, P = 0.001) was associated with MRSA acquisition. in the "case-case-control" study, burns involving head (OR=3.43, 95%CI = 1.50-7.81, P = 0.003) and the number of wound excisions (OR = 1.83, 95%CI = 1.27-2.63, P = 0.001) were significant risk factors for MRSA. Burns involving perineum were negatively associated with MSSA acquisition (OR = 0.16, 95%CI = 0.03-0.75, P = 0.02). In conclusion, the acquisition of MRSA was related to the site of the burn and to the surgical manipulation of tissues, but not to the use of antimicrobials. (C) 2009 Elsevier Ltd and ISBI. All rights reserved.

Effect of photodynamic therapy on the healing of cutaneous third-degree-burn: histological study in rats

The aim of this study was to conduct a histological assessment of the effect of photodynamic therapy (PDT) on the repairing of third-degree-burn wounds made on the backs of rats with a heated scalpel. Ninety-six rats were divided into groups: G1, control (n = 24), cold scalpel; G2, burned, heated scalpel (n = 24); G3, low-level laser therapy (LLLT) (n = 24), on burns; and G4, photodynamic therapy (PDT) (n = 24), toluidine-O blue (100 A mu g/ml) and LLLT treatment on burns. The laser (685 nm) was applied in continuous mode, 50 mW, 4.5 J/cm(2), contact mode at nine points (9 s/point). Eight animals in each group were killed at 3 days, 7 days or 14 days after surgery, and tissue specimens containing the whole wounded area were removed and processed for histological analysis; the results were statistically analyzed with Kruskal-Wallis and Dunn's tests (P < 0.05). The results demonstrated significant differences between G2 and G3, and between G2 and G4, at both 3 days and 7 days, with regard to acute inflammation scores; G1 and G2 showed significant differences when compared with G4 at 3 days, with regard to neo-angiogenesis scores; G1 and G2 were statistically different from G3 and G4 at both 3 days and 7 days, with regard to re-epithelization scores; G2 showed statistically significant differences when compared with G3 and G4 with regard to collagen fiber scores at 7 days. LLLT and PDT acted as a biostimulating coadjuvant agent, balancing the undesirable effect of the burn on the wound healing process, acting mainly in the early healing stages, hastening inflammation and increasing collagen deposition.

Spatial and temporal variability of soil CO2 emission in a sugarcane area under green and slash-and-burn managements

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Production grinding burn detection using acoustic emission and electric power signals

This work uses a monitoring system based on a PC platform, where the acoustic emission and electric power signals generated during the grinding process are used to investigate superficial burning occurrence in a surface grinding operation using two types of steel, three grinding conditions and an Al203 vitrified grinding wheel. Acoustic emission signals on the workpiece and grinding power were measured during a surface plunge operation until the grinding burn happened. From the results the standard deviation of the acoustic emission signal and the maximum electric power were calculated for each grinding pass. The proposed DPO parameter is the product between the power level and acoustic emission standard deviation. The results show that both signals can be used for burning detection, and the parameter DPO is the best indicator for the burning studied in this work. This can be explained by the high dispersion of the acoustic emission RMS level associated to the high power consumption when the grinding wheel lose its sharpness.

Neural network detection of grinding burn from acoustic emission

An artificial neural network (ANN) approach is proposed for the detection of workpiece `burn', the undesirable change in metallurgical properties of the material produced by overly aggressive or otherwise inappropriate grinding. The grinding acoustic emission (AE) signals for 52100 bearing steel were collected and digested to extract feature vectors that appear to be suitable for ANN processing. Two feature vectors are represented: one concerning band power, kurtosis and skew; and the other autoregressive (AR) coefficients. The result (burn or no-burn) of the signals was identified on the basis of hardness and profile tests after grinding. The trained neural network works remarkably well for burn detection. Other signal-processing approaches are also discussed, and among them the constant false-alarm rate (CFAR) power law and the mean-value deviance (MVD) prove useful.

Molecular epidemiology of methicillin-resistant Staphylococcus aureus in a burn unit from Brazil

Methicillin-resistant Staphylococcus aureus (MRSA) poses a threat for patients in burn units. Studies that mix epidemiological designs with molecular typing may contribute to the development of strategies for MRSA control. We conducted a study including: molecular characterization of Staphylococcal Chromosome Cassette mecA (SCCmec), strain typing with pulsed field gel electrophoresis (PFGE) and detection of virulence genes, altogether with a case-case-control study that assessed risk factors for MRSA and for methicillin-susceptible S. aureus (MSSA), using S. aureus negative patients as controls. Strains were collected from clinical and surveillance cultures from October 2006 through March 2009. MRSA was isolated from 96 patients. Most isolates (94.8%) harbored SCCmec type III. SCCmec type IV was identified in isolates from four patients. In only one case it could be epidemiologically characterized as community-associated. PFGE typing identified 36 coexisting MRSA clones. When compared to MSSA (38 isolates), MRSA isolates were more likely to harbor two virulence genes: tst and lukPV. Previous stay in other hospital and admission to Intensive Care Unit were independent risk factors for both MRSA and MSSA, while the number of burn wound excisions was significantly related with the former (OR = 6.80, 95%CI = 3.54-13.07). In conclusion, our study found polyclonal endemicity of MRSA in a burn unit, possibly related to importing of strains from other hospitals. Also, it pointed out to a role of surgical procedures in the dissemination of MRSA strains. © 2013 Elsevier Ltd and ISBI. All rights reserved.

Risk factors for the acquisition of imipenem-resistant Acinetobacter baumannii in a burn unit: An appraisal of the effect of colonization pressure

Imipenem-resistant Acinetobacter baumannii (IRAB) is a major threat for critically ill patients, including those admitted to burn units. Recent studies have suggested that colonization pressure (the proportion of patients or patient-days harbouring the pathogen of interest) is an important driver of the risk for acquisition of multidrug-resistant organisms. With that in mind, we conducted a cohort study, enrolling 208 patients admitted to a burn unit from November 2008 through December 2009. The outcome of interest was the acquisition of IRAB. In addition to the usual risk factors, we assessed the impact of colonization pressure. The number of wound excisions (odds ratio (OR) 12.06, 95% confidence interval (CI) 2.82-51.64) and the number of antimicrobials used (OR 22.82, 95% CI 5.15-101.19) were significant risk factors for the outcome of interest. On the other hand, colonization pressure (measured for whole time of exposure or up to the last 14, 7, or 3 days) was not associated with the risk for IRAB acquisition.

Ketorolac eye drops reduce inflammation and delay re-epithelization in response to corneal alkali burn in rabbits, without affecting iNOS or MMP-9

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Guanylate cyclase inhibition by methylene blue as an option in the treatment of vasoplegia after a severe burn. A medical hypothesis

Today it is known that severe burns can be accompanied by the phenomenon of vasoplegic syndrome (VS), which is manifested by persistent and diffuse vasodilation, hypotension and low vascular resistance, resulting in circulatory and respiratory failure. The decrease in systemic vascular resistance observed in VS is associated with excessive production of nitric oxide (NO). In the last 2 decades, studies have reported promising results from the administration of an NO competitor, methylene blue (MB), which is an inhibitor of the soluble guanylate cyclase (sGC), in the treatment of refractory cases of vasoplegia. This medical hypothesis rationale is focused on the tripod of burns/vasoplegia catecholamine resistant/methylene blue. This article has 3 main objectives: 1) to study the guanylate cyclase inhibition by MB in burns; 2) to suggest MB as a viable, safe and useful co-adjuvant therapeutic tool of fluid resuscitation, and; 3) to suggest MB as burns hypotensive vasoplegia amine-resistant treatment.