A probability-based approach for assessing the relationship between crash accidents and pavement properties

Skid resistance is a condition parameter characterising the contribution that a road makes to the friction between a road surface and a vehicle tyre. Studies of traffic crash histories around the world have consistently found that a disproportionate number of crashes occur where the road surface has a low level of surface friction and/or surface texture, particularly when the road surface is wet. Various research results have been published over many years and have tried to quantify the influence of skid resistance on accident occurrence and to characterise a correlation between skid resistance and accident frequency. Most of the research studies used simple statistical correlation methods in analysing skid resistance and crash data.----- ------ Preliminary findings of a systematic and extensive literature search conclude that there is rarely a single causation factor in a crash. Findings from research projects do affirm various levels of correlation between skid resistance and accident occurrence. Studies indicate that the level of skid resistance at critical places such as intersections, curves, roundabouts, ramps and approaches to pedestrian crossings needs to be well maintained.----- ----- Management of risk is an integral aspect of the Queensland Department of Main Roads (QDMR) strategy for managing its infrastructure assets. The risk-based approach has been used in many areas of infrastructure engineering. However, very limited information is reported on using risk-based approach to mitigate crash rates related to road surface. Low skid resistance and surface texture may increase the risk of traffic crashes.----- ----- The objectives of this paper are to explore current issues of skid resistance in relation to crashes, to provide a framework of probability-based approach to be adopted by QDMR in assessing the relationship between crash accidents and pavement properties, and to explain why the probability-based approach is a suitable tool for QDMR in order to reduce accident rates due to skid resistance.

Risky driving or risky drivers? Exploring driving and crash histories of illegal street racing offenders

Illegal street racing has received increased attention in recent years from road safety professionals and the media as jurisdictions in Australia, Canada, and the United States have implemented laws to address the problem, which primarily involves young male drivers. Although some evidence suggests that the prevalence of illegal street racing is increasing, obtaining accurate estimates of the crash risk of this behavior is difficult because of limitations in official data sources. Although crash risk can be explored by examining the proportion of incidents of street racing that result in crashes, or the proportion of all crashes that involve street racing, this paper reports on the findings of a study that explored the riskiness of involved drivers. The driving histories of 183 male drivers with an illegal street racing conviction in Queensland, Australia, were compared with a random sample of 183 male Queensland drivers with the same age distribution. The offender group was found to have significantly more traffic infringements, license sanctions, and crashes than the comparison group. Drivers in the offender group were more likely than the comparison group to have committed infringements related to street racing, such as speeding, "hooning," and offenses related to vehicle defects or illegal modifications. Insufficient statistical capacity prevented full exploration of group differences in the type and nature of earlier crashes. It was concluded, however, that street racing offenders generally can be considered risky drivers who warrant attention and whose risky behavior cannot be explained by their youth alone.

Road crash proneness prediction using data mining

Developing safe and sustainable road systems is a common goal in all countries. Applications to assist with road asset management and crash minimization are sought universally. This paper presents a data mining methodology using decision trees for modeling the crash proneness of road segments using available road and crash attributes. The models quantify the concept of crash proneness and demonstrate that road segments with only a few crashes have more in common with non-crash roads than roads with higher crash counts. This paper also examines ways of dealing with highly unbalanced data sets encountered in the study.

Using data mining to predict road crash count with a focus on skid resistance values

Road crashes cost world and Australian society a significant proportion of GDP, affecting productivity and causing significant suffering for communities and individuals. This paper presents a case study that generates data mining models that contribute to understanding of road crashes by allowing examination of the role of skid resistance (F60) and other road attributes in road crashes. Predictive data mining algorithms, primarily regression trees, were used to produce road segment crash count models from the road and traffic attributes of crash scenarios. The rules derived from the regression trees provide evidence of the significance of road attributes in contributing to crash, with a focus on the evaluation of skid resistance.

A crash avoidance framework for heavy equipment control systems using 3D imaging sensors

This paper presents a preliminary crash avoidance framework for heavy equipment control systems. Safe equipment operation is a major concern on construction sites since fatal on-site injuries are an industry-wide problem. The proposed framework has potential for effecting active safety for equipment operation. The framework contains algorithms for spatial modeling, object tracking, and path planning. Beyond generating spatial models in fractions of seconds, these algorithms can successfully track objects in an environment and produce a collision-free 3D motion trajectory for equipment.

Impact of traffic oscillations on freeway crash occurrences

Traffic oscillations are typical features of congested traffic flow that are characterized by recurring decelerations followed by accelerations (stop-and-go driving). The negative environmental impacts of these oscillations are widely accepted, but their impact on traffic safety has been debated. This paper describes the impact of freeway traffic oscillations on traffic safety. This study employs a matched case-control design using high-resolution traffic and crash data from a freeway segment. Traffic conditions prior to each crash were taken as cases, while traffic conditions during the same periods on days without crashes were taken as controls. These were also matched by presence of congestion, geometry and weather. A total of 82 cases and about 80,000 candidate controls were extracted from more than three years of data from 2004 to 2007. Conditional logistic regression models were developed based on the case-control samples. To verify consistency in the results, 20 different sets of controls were randomly extracted from the candidate pool for varying control-case ratios. The results reveal that the standard deviation of speed (thus, oscillations) is a significant variable, with an average odds ratio of about 1.08. This implies that the likelihood of a (rear-end) crash increases by about 8% with an additional unit increase in the standard deviation of speed. The average traffic states prior to crashes were less significant than the speed variations in congestion.

Fault diagnosis of induction motor based on decision trees and adaptive neuro-fuzzy inference

This paper presents a fault diagnosis method based on adaptive neuro-fuzzy inference system (ANFIS) in combination with decision trees. Classification and regression tree (CART) which is one of the decision tree methods is used as a feature selection procedure to select pertinent features from data set. The crisp rules obtained from the decision tree are then converted to fuzzy if-then rules that are employed to identify the structure of ANFIS classifier. The hybrid of back-propagation and least squares algorithm are utilized to tune the parameters of the membership functions. In order to evaluate the proposed algorithm, the data sets obtained from vibration signals and current signals of the induction motors are used. The results indicate that the CART–ANFIS model has potential for fault diagnosis of induction motors.

Fault diagnostics and supervised testing : How fault diagnostic tools can be proactive?

The topic of fault detection and diagnostics (FDD) is studied from the perspective of proactive testing. Unlike most research focus in the diagnosis area in which system outputs are analyzed for diagnosis purposes, in this paper the focus is on the other side of the problem: manipulating system inputs for better diagnosis reasoning. In other words, the question of how diagnostic mechanisms can direct system inputs for better diagnosis analysis is addressed here. It is shown how the problem can be formulated as decision making problem coupled with a Bayesian Network based diagnostic mechanism. The developed mechanism is applied to the problem of supervised testing in HVAC systems.

Application of machine learning in fault diagnostics of mechanical systems

A diagnostic method based on Bayesian Networks (probabilistic graphical models) is presented. Unlike conventional diagnostic approaches, in this method instead of focusing on system residuals at one or a few operating points, diagnosis is done by analyzing system behavior patterns over a window of operation. It is shown how this approach can loosen the dependency of diagnostic methods on precise system modeling while maintaining the desired characteristics of fault detection and diagnosis (FDD) tools (fault isolation, robustness, adaptability, and scalability) at a satisfactory level. As an example, the method is applied to fault diagnosis in HVAC systems, an area with considerable modeling and sensor network constraints.

The rules of autogeddon : sex death and law in J G Ballard’s Crash

It was reported that the manuscript of Crash was returned to the publisher with a note reading ‘The author is beyond psychiatric help’. Ballard took the lay diagnosis as proof of complete artistic success. Crash conflates the Freudian tropes of libido and thanatos, overlaying these onto the twentieth century erotic icon, the car. Beyond mere incompetent adolescent copulatory fumblings in the back seat of the parental sedan or the clichéd phallic locomotor of the mid-life Ferrari, Ballard engages the full potentialities of the automobile as the locus and sine qua non of a perverse, though functional erotic. ‘Autoeroticism’ is transformed into automotive, traumatic or surgical paraphilia, driving Helmut Newton’s insipid photo-essays of BDSM and orthopædics into an entirely new dimension, dancing precisely where (but more crucially, because) the ‘body is bruised to pleasure soul’. The serendipity of quotidian accidental collisions is supplanted, in pursuit of the fetishised object, by contrived (though not simulated) recreations of iconographic celebrity deaths. Penetration remains as a guiding trope of sexuality, but it is confounded by a perversity of focus. Such an obsessive pursuit of this autoerotic-as-reality necessitates the rejection of the law of human sexual regulation, requiring the re-interpretation of what constitutes sex itself by looking beyond or through conventional sexuality into Ballard’s paraphiliac and nightmarish consensual Other. This Other allows for (if not demands) the tangled wreckage of a sportscar to function as a transformative sexual agent, creating, of woman, a being of ‘free and perverse sexuality, releasing within its dying chromium and leaking engine-parts, all the deviant possibilities of her sex’.

Fault isolation in distributed generation connected distribution networks

Protection of a distribution network in the presence of distributed generators (DGs) using overcurrent relays is a challenging task due to the changes in fault current levels and reverse power flow. Specifically, in the presence of current limited converter interfaced DGs, overcurrent relays may fail to isolate the faulted section either in grid connected or islanded mode of operation. In this paper, a new inverse type relay is presented to protect a distribution network, which may have several DG connections. The new relay characteristic is designed based on the measured admittance of the protected line. The relay is capable of detecting faults under changing fault current levels. The relay performance is evaluated using PSCAD simulation and laboratory experiments.