Formation and structure of composite coating of HDA and micro-plasma oxidation on A3 steel

Composite coatings were obtained on A3 steel by hot dipping aluminum(HDA) at 720 ℃ for 6 min and micro-plasma oxidation(MPO) in alkali electrolyte. The surface morphology, element distribution and interface structure of composite coatings were studied by means of XRD, SEM and EDS. The results show that the composite coatings obtained through HDA/MPO on A3 steel consist of four layers. From the surface to the substrate, the layer is loose Al2O3 ceramic, compact Al2O3 ceramic, Al and FeAl intermetallic compound layer in turn. The adhesions among all the layers are strengthened because the ceramic layer formed at the Al surface originally, FeAl intermetallic compound layer and substrate are combined in metallurgical form through mutual diffusion during HDA process.Initial experiment results disclose that the anti-corrosion performance and wear resistance of composite coating are obviously improved through HDA/MPO treatment.

Electrochemical Impedance Spectroscopy Of Peo Coating On Aluminum Alloy In Nacl Solution

Various Plasma Electrolytic Oxidation (PEO) ceramic coatings were prepared on LY12 aluminum alloy by adjusting the concentration of sodium silicate solution. Optical microscope (OM), XRD and EIS were used to study their morphology, composition and anti corrosion behavior in NaCl solution. Increasing concentration of sodium silicate leads to the increase of the total coating thickness while too high and too low concentration lead to the decrease of inner dense layer. The main composition of PEO coatings prepared in 20, 40 and above 60g/L concentration solution are correspondingly alumina, alumina with mullite, and amorphous phase. The corrosion resistance is determined by the inner dense layer. Increasing the thickness of inner dense layer can improve the anti-corrosion performance. PEO coating's corrosion resistance in acidic, alkaline and neutral NaCl solution is proved and the corrosion mechanism involved is also discussed.

Stress-distribution at the rigid circular-arc inclusion end

The elastic plane problem of a rigid co-circular arc inclusion under arbitrary loads is dealt with. Applying Schwarz's reflection principle integrated with the analysis of the singularity of complex stress functions, the general solution of the problem is found and several closed-form solutions to some problems of practical importance are given. Finally, the stress distribution at the arc inclusion end is examined and a comparison is made with that of the rigid line inclusion end to show the effect of curvature.

Formation and Structure of Composite Coating of HAD and Micro-Plasma Oxidation on A3 Steel

Composite coatings were obtained on A3 steel by hot dipping aluminum(HAD) at 720 degreesC for 6 min and micro-plasma oxidation (MPO) in alkali electrolyte. The surface morphology, element distribution and interface structure of composite coatings were studied by means of XRD, SEM and EDS. The results show that the composite coatings obtained through HAD/MPO on A3 steel consist of four layers. From the surface to the substrate, the layer is loose Al2O3 ceramic, compact Al2O3 ceramic, At and FeAl intermetallic compound layer in turn. The adhesions among all the layers are strengthened because the ceramic layer formed at the At surface originally, FeAl intermetallic compound layer and substrate are combined in metallurgical form through mutual diffusion during HAD process. Initial experiment results disclose that the anti-corrosion performance and wear resistance of composite coating are obviously improved through HAD/MPO treatment.

Perfil dos peptídeos gastrointestinais na obesidade programada pelo desmame precoce e após a terapia anti-obesidade com cálcio

O desmame precoce (DP) leva ao desenvolvimento tardio de obesidade e de resistência insulínica (RI), sendo essas alterações prevenidas quando os animais são suplementados com cálcio. Sabe-se que os peptídeos gastrointestinais (GI) atuam na regulação do apetite e em diversos outros processos, podendo ter um papel relevante no desenvolvimento da obesidade e RI. Uma vez que os animais programados pelo DP são obesos e hiperfágicos, investigamos o perfil plasmático e tecidual de GLP-1, CCK e PYY (anorexígenos) de grelina (orexígena) e de seus receptores, assim como o efeito da dieta rica em cálcio sobre estes peptídeos a fim de identificar algum distúrbio no controle do apetite. Ao nascimento das proles, ratas lactantes Wistar foram separadas em: grupo DP (desmame precoce, n=20), filhotes cujas mães tiveram as mamas enfaixadas, impedindo o acesso da prole ao leite nos últimos 3 dias de lactação; e grupo C (controle, n=10), filhotes com livre acesso ao leite materno. Aos 120 dias, as proles DP foram subdivididas em: grupo DP, alimentado com ração comercial padrão, e grupo DPCa, alimentado com ração suplementada com cálcio (10g de carbonato de cálcio/Kg de ração). Os animais foram sacrificados aos 21 e 180 dias de vida. Quantificamos: GLP-1, CCK, PYY, grelina e citocinas (IL-6, TNF-α e IL-10) plasmáticas por ELISA; o conteúdo de grelina no estômago por ELISA e imunohistoquímica; o conteúdo de GLP-1 (intestino), GLP1-R (intestino, TA e ARC) e GHSR-1a (estômago e ARC) por Western blotting. Dados significativos quando p<0,05. Aos 21 dias, a prole DP apresentou aumento de GLP-1 no plasma (+168%) e GLP1-R no tecido adiposo (+72%), embora menor conteúdo de GLP-1 (-59%) e GLP1-R (-58%) no intestino. Não observamos alterações plasmáticas de grelina, CCK e PPY e no conteúdo de GHSR-1a no estômago aos 21 dias. Aos 180 dias, não verificamos diferença em nenhum dos peptídeos GI no plasma na prole DP. Porém, observamos menor conteúdo intestinal de GLP-1 tanto no grupo DP (-33%) quanto no DPCa (-32%), e uma tendência da grelina (+20%) e do GHSR-1a (+31%) a estarem elevados no estômago do grupo DP. Além de menor conteúdo de GLP1-R no tecido adiposo no grupo DP (-59%) e maior conteúdo de GLP1-R no intestino da prole DPCa (+62%). Não encontramos diferença entre os grupos na expressão de GLP1-R e GHSR-1a no ARC. O grupo DP apresentou ainda um perfil pró-inflamatório caracterizado por maior TNF-α e menor IL-10 no plasma. O DP alterou o perfil dos peptídeos GI a curto e longo prazos, o que pode ter colaborado para o desenvolvimento da obesidade, hiperfagia e RI neste modelo, uma vez que o GLP-1, único peptídeo alterado no período de imprinting, possui um possível papel adipogênico. A suplementação com cálcio foi capaz de reverter todas as alterações produzidas pelo DP. Evidenciamos, então, a importância do aleitamento materno na formação do comportamento alimentar e do balanço metabólico, bem como o papel da suplementação com cálcio no tratamento da obesidade e seus distúrbios associados, inclusive nas alterações do apetite.

Giant Goos-Hanchen displacement enhanced by dielectric film in frustrated total internal reflection configuration

It is predicted that the Goos-Hanchen displacement in the usual frustrated total internal reflection configuration can be resonantly enhanced greatly by coating a dielectric thin film onto the surface of the first prism when the angle of incidence is larger than the critical angle for total reflection at the prism-vacuum interface and is smaller than but close to the critical angle for total reflection at the prism-film interface. Theoretical analysis shows that the displacement of transmitted beam is about half the displacement of reflected beam in the thick limit of the vacuum gap between the two prisms. This is to be compared with the relation in the usual symmetric double-prism configuration that the displacement of transmitted beam is equal to the displacement of reflected beam. Numerical simulations for a Gaussian incident beam of waist width of 100 wavelengths reveal that when the dielectric thin film is of the order of wavelength in thickness, both the reflected and transmitted beams maintain well the shape of the incident beam in the thick limit of the vacuum gap. So largely enhanced displacements would lead to applications in optical devices and integrated optics. (c) 2007 American Institute of Physics.

Characteristics of anodic coatings oxidized to different voltage on AZ91D Mg alloy by micro-arc oxidization technique

With increasing applied voltage, three types of anodic coatings, passive film, micro-spark ceramic coating and spark ceramic coating were made by micro-arc oxidization (MAO) technique on AZ91D magnesium alloy in alkali-silicate solution. The structure, composition characteristics and the electrochemical properties of coatings were also studied with SEM, XRD and EIS (electrochemical impedance spectroscopy) technique, respectively. It is found that the electrochemical properties are closely related to the structure and composition characteristics of the anodic coatings. At the same time, the characteristics of the three types of anodic coatings differ significantly, among them, the micro-spark ceramic coating, prepared in the voltage range of 170similar to220V exhibits compact, homogeneous structure and highest corrosion-resistance.

Characterisation and evaluation of novel surfactant bacterial anti-adherent coatings for endotracheal tubes designed for the prevention of ventilator-associated pneumonia.

It is accepted that ventilator-associated pneumonia is a frequent cause of morbidity and mortality in intensive care patients. This study describes the physicochemical properties of novel surfactant coatings of the endotracheal tube and the resistance to microbial adherence of surfactant coated endotracheal tube polyvinylchloride (PVC). Organic solutions of surfactants containing a range of ratios of cholesterol and lecithin (0:100, 25:75, 50:50, 75:25, dissolved in dichloromethane) were prepared and coated onto endotracheal tube PVC using a multiple dip-coating process. Using modulated temperature differential scanning calorimetry it was confirmed that the binary surfactant systems existed as physical mixtures. The surface properties of both surfactant-coated and uncoated PVC, following treatment with either pooled human saliva or phosphate-buffered saline (PBS), were characterised using dynamic contact angle analysis. Following treatment with saliva, the contact angles of PVC decreased; however, those of the coated biomaterials were unaffected, indicating different rates and extents of macromolecular adsorption from saliva onto the coated and uncoated PVC. The advancing and receding contact angles of the surfactant-coated PVC were unaffected by sonication, thereby providing evidence of the durability of the coatings. The cell surface hydrophobicity and zeta potentials of isolates of Staphylococcus aureus and Pseudomonas aeruginosa, following treatment with either saliva or PBS, and their adherence to uncoated and surfactant-coated PVC (that had been pre-treated with saliva) were examined. Adherence of S. aureus and Ps. aeruginosa to surfactant-coated PVC at each successive time period (0.5, 1, 2, 4, 8 h) was significantly lower than to uncoated PVC, the extent of the reduction frequently exceeding 90%. Interestingly, the microbial anti-adherent properties of the coatings were dependent on the lecithin content. Based on the impressive microbial anti-adherence properties and durability of the surfactant coating on PVC following dip coatings, it is proposed that these systems may usefully reduce the incidence of ventilator-associated pneumonia when employed as luminal coatings of the endotracheal tube.

Towards Educational Inclusion in a Contested Society: From Critical Reflection to Cultural Action

This paper is written by democratic educators who stand for the idea that is it worth developing, through classrooms and schools, a socially just (egalitarian), anti-discriminatory society where interdependent relationships are valued. This paper significantly develops some of the ideas explored in the authors’ earlier contribution concerned with progress in Northern Ireland towards educational inclusion, and how this might more effectively advance in a post-conflict transforming society. In particular, the paper poses the ‘so what’ question, and it responds by exploring the practical implications of six key ideas thought essential for transforming learning environments supportive of cultural diversity, equity and excellence for all. In addition, it includes examples of how school staff, along with collaborating partners, might utilize these key principles in order to facilitate school improvement.

Anti-adherent and antifungal activities of surfactant-coated poly (ethylcyanoacrylate) nanoparticles

Application of non-drug-loaded poly(ethylcyanoacrylate) nanoparticles (NP) to buccal epithelial cells (BEC) imparted both anti-adherent and antifungal effects. NP prepared using emulsion polymerisation and stabilised using cationic, anionic and non-ionic surfactants decreased Candida albicans blastospore adhesion, an effect attributable to the peripheral coating of surfactant. Cetrimide and Pluronic (R) P 123 were shown to be most effective, producing mean percentage reductions in blastospore adherence of 52.7 and 37.0, respectively. Resultant zeta potential matched the polarity of the surfactant, with those stabilised using cetrimide being especially positive (+31.3 mV). Preparation using anionic surfactants was shown to be problematic, with low yield and wide particle size distribution. Evaluation of the antifungal effect of the peripheral coat was evaluated using zones of inhibition and viable counts assays. The former test revealed poor surfactant diffusion through agar, but did show evidence of limited kill. However, the latter method showed that cationic surfactants associated with NP produced high levels of kill, in contrast to those coated with anionic surfactants, where kill was not evident. Non-ionic surfactant-coated NP produced intermediate kill rates. Results demonstrate that surfactant-coated NP, particularly the cationic types, form the possible basis of a prophylactic formulation that primes the candidal target (BEC) against fungal adhesion and infection. (c) 2007 Elsevier B.V. All rights reserved.

Intersectional Discrimination in EU Law - a critical reflection

This chapter introduces the concept of intersectionality in its relevance for anti-discrimination law. It illustrates the use (or non-use) of this concept by the Court of Justice, and provides examples of case law ignoring intersectional inequalities. Finally, it proposes to re-frame and re-focus EU anti-discrimination law around nodes of inequalities as a way to better address intersectional inequalities.

Improving a regional chemotherapy service by learning from deaths occurring within 30 days of treatment with systemic anti-cancer therapy.

Background: Outwith clinical trials, patient outcomes specifically related to SACT (systemic anti-cancer therapy) are not well reported despite a significant proportion of patients receiving active treatment at the end of life. The NCEPOD reviewing deaths within 30 days of SACT found SACT caused or hastened death in 27% of cases.

Method: Across the Northern Ireland cancer network, 95 patients who died within 30 days of SACT for solid tumours were discussed at the Morbidity and Mortality monthly meeting during 2013. Using a structured template, each case was independently reviewed, with particular focus on whether SACT caused or hastened death.

Results: Lung, GI and breast cancers were the most common sites. Performance status was recorded in 92% at time of final SACT cycle (ECOG PS 0-2 89%).

In 57% the cause of death was progressive disease. Other causes included thromboembolism (13%) and infection (5% neutropenic sepsis, 6% non-neutropenic sepsis). In 26% with death from progressive disease, the patient was first cycle of first line treatment for metastatic disease. In the majority discussion regarding treatment aims and risks was documented. Only one patient was receiving SACT with curative intent, who died from appropriately managed neutropenic sepsis.

A definitive decision regarding SACT's role in death was made in 60%: in 49% SACT was deemed non-contributory and in 11% SACT was deemed the cause of death. In 40% SACT did not play a major role, but a definitive negative association could not be made.

Conclusion: Development of a robust review process of 30-day mortality after SACT established a benchmark for SACT delivery for future comparisons and identified areas for SACT service organisation improvement. Moreover it encourages individual practice reflection and highlights the importance of balancing patients' needs and concerns with realistic outcomes and risks, particularly in heavily pre-treated patients or those of poor performance status.

Revêtement anti-apoptotique à base de chondroïtine sulfate : vers un stent-graft bioactif

La réparation endovasculaire (EVAR) est une technique minimalement invasive permettant de traiter l’anévrisme de l’aorte abdominale (AAA) par l’entremise d’un stent- graft (SG). L’utilisation d’EVAR est actuellement limitée par de fréquentes complications liées à une guérison inadéquate autour de l’implant. Ce manque de guérison est principalement dû au type de recouvrement polymérique des SG, au milieu pro-apoptotique des AAA et à l’accès réduit aux nutriments et à l’oxygène après EVAR. L’objectif de cette thèse consistait à concevoir un revêtement bioactif permettant d’inhiber l’apoptose et stimuler la croissance des cellules musculaires lisses vasculaires (CMLV), pour ainsi favoriser la guérison des tissus vasculaires autour des SG. La chondroïtine-4-sulfate (CS) a d’abord été choisie, car elle a été identifiée comme un médiateur important de la réparation vasculaire. Il a été démontré que la CS en solution influence directement la résistance à l’apoptose des CMLV, en plus de favoriser la différenciation myofibroblastique chez les fibroblastes. Dans le cadre de ce projet, un premier revêtement à base de CS et de collagène a été créé. Bien que le revêtement permettait d’induire une résistance à l’apoptose chez les CMLV, il se désintégrait trop rapidement dans des conditions aqueuses. Une nouvelle méthodologie a donc été adaptée afin de greffer la CS directement sur des surfaces aminées, à l’aide d’un système utilisant un carbodiimide. Dans le but d’accroître la croissance des CMLV à la surface des revêtements, le facteur de croissance de l’épiderme (EGF) a ensuite été sélectionné. En plus de ses propriétés mitogéniques et chimiotactiques, l’EGF stimule la production d’éléments de la matrice extracellulaire, comme le collagène et la fibronectine. De plus, l’activation du récepteur de l’EGF inhibe également l’apoptose des CMLV. L’EGF a donc été greffé sur la CS. Le revêtement de CS+EGF a démontré une bonne uniformité et bioactivité sur des surfaces de verre aminé. iii iv Dans une 3ème étape, afin de permettre de transposer ce revêtement bioactif sur des implants, plusieurs méthodes permettant de créer des groupements d’amines primaires sur les biomatériaux polymériques comme le PET ou le ePTFE ont été étudiées. La polymérisation par plasma a été choisie pour créer le revêtement CS+EGF à la surface de PET. Une fois de plus, celui-ci a permis d’inhiber l’apoptose des CMLV, dans des conditions pro-apoptotiques, et de favoriser la croissance des cellules. Le revêtement de CS et d’EGF, déposé sur des surfaces aminées, possède des caractéristiques biologiques intéressantes et semble donc prometteur pour favoriser une meilleure guérison autour des SG.

Corrosion inhibiting coating

The present invention provides a corrosion inhibiting coating comprising a rare earth-based organic compound and/or a combination of a rare earth metal and an organic compound, a method of inhibiting corrosion involving the coating and a method of preparing said coating.

Studying and evaluating anti-corrosion coatings and inhibitors using the wire beam electrode method in conjunction with electrochemical noise analysis

Purpose – To provide a summary of research work carried out mainly in the authors' group for evaluating various protective coatings including rustproofing oils, and also for studying corrosion inhibitors using the wire beam electrode (WBE) method.

Design/methodology/approach – A range of published papers published during the past 15 years was summarised and reviewed. Recent research work in the authors' group was also included, which involved the combined use of the WBE with electrochemical noise analysis and the scanning reference electrode technique.

Findings – The WBE method has been developed into a very useful tool of evaluating the performance of coatings and inhibitors. In particular, The WBE is uniquely applicable for determining the performance of coatings and inhibitors to control localised corrosion.

Research limitations/implications – Focusing mainly on recent research.

Practical implications – A useful source of information for researchers and graduate students working in the areas of organic coating and inhibitor research.

Originality/value – The first summary or review on this research topic.