998 resultados para Angle Normal Faults
Resumo:
Whole-core magnetic susceptibility measurements define a detailed stratigraphy that enables correlation between the various Pleistocene, Pliocene, and upper Miocene sections cored on ODP Leg 110, near the Tiburon Rise. The magnetic susceptibility in these sections is primarily related to the content of volcanic ash, rich in titanomagnetite, and also inversely related to calcium carbonate content. The high resolution of the susceptibility record enables correlations with a resolution of about 0.3 m of sediment thickness, and the identification of minor faults not definable by biostratigraphic means. Reverse and normal faults identified in Hole 672A are probably a result of normal oceanic sediment dewatering and compaction processes. This work indicates some of the problems of using visible ash layers as time-stratigraphic markers.
Resumo:
Fluids in subduction zones can influence seismogenic behaviour and prism morphology. The Eastern Makran subduction zone, offshore Pakistan, has a very thick incoming sediment section of up to 7.5 km, providing a large potential fluid source to the accretionary prism. A hydrate-related bottom simulating reflector (BSR), zones of high amplitude reflectivity, seafloor seep sites and reflective thrust faults are present across the accretionary prism, indicating the presence of fluids and suggesting active fluid migration. High amplitude free gas zones and seep sites are primarily associated with anticlinal hinge traps, and fluids here appear to be sourced from shallow biogenic sources and migrate to the seafloor along minor normal faults. There are no observed seep sites associated with the surface expression of the wedge thrust faults, potentially due to burial of the surface trace by failure of the steep thrust ridge slopes. Thrust fault reflectivity is restricted to the upper 3 km of sediment and the deeper décollement is non-reflective. We interpret that fluids and overpressure are not common in the deeper stratigraphic section. Thermal modelling of sediments at the deformation front suggests that the deeper sediment section is relatively dewatered and not currently contributing to fluid expulsion in the Makran accretionary prism.
Resumo:
The Holocene Twin Slides form the most recent of recurrent mass wasting events along the NE portion of Gela Basin within the Sicily Channel, central Mediterranean Sea. Here, we present new evidence on the morphological evolution and stratigraphic context of this coeval slide complex based on deepdrilled sediment sequences providing a >100 ka paleo-oceanographic record. Both Northern (NTS) and Southern Twin Slide (STS) involve two failure stages, a debris avalanche and a translational slide, but are strongly affected by distinct preconditioning factors linked to the older and buried Father Slide. Core-acoustic correlations suggest that sliding occurred along sub-horizontal weak layers reflecting abrupt physical changes in lithology or mechanical properties. Our results show further that headwall failure predominantly took place along sub-vertical normal faults, partly through reactivation of buried Father Slide headscarps.
Resumo:
El aumento de la temperatura media de la Tierra durante el pasado siglo en casi 1 ºC; la subida del nivel medio del mar; la disminución del volumen de hielo y nieve terrestres; la fuerte variabilidad del clima y los episodios climáticos extremos que se vienen sucediendo durante las ultimas décadas; y el aumento de las epidemias y enfermedades infecciosas son solo algunas de las evidencias del cambio climático actual, causado, principalmente, por la acumulación de gases de efecto invernadero en la atmósfera por actividades antropogénicas. La problemática y preocupación creciente surgida a raíz de estos fenómenos, motivo que, en 1997, se adoptara el denominado “Protocolo de Kyoto” (Japón), por el que los países firmantes adoptaron diferentes medidas destinadas a controlar y reducir las emisiones de los citados gases. Entre estas medidas cabe destacar las tecnologías CAC, enfocadas a la captura, transporte y almacenamiento de CO2. En este contexto se aprobó, en octubre de 2008, el Proyecto Singular Estratégico “Tecnologías avanzadas de generación, captura y almacenamiento de CO2” (PSE-120000-2008-6), cofinanciado por el Ministerio de Ciencia e Innovación y el FEDER, el cual abordaba, en su Subproyecto “Almacenamiento Geológico de CO2” (PSS-120000-2008-31), el estudio detallado, entre otros, del Análogo Natural de Almacenamiento y Escape de CO2 de la cuenca de Ganuelas-Mazarrón (Murcia). Es precisamente en el marco de dicho Proyecto en el que se ha realizado este trabajo, cuyo objetivo final ha sido el de predecir el comportamiento y evaluar la seguridad, a corto, medio y largo plazo, de un Almacenamiento Geológico Profundo de CO2 (AGP-CO2), mediante el estudio integral del citado análogo natural. Este estudio ha comprendido: i) la contextualización geológica e hidrogeológica de la cuenca, así como la investigación geofísica de la misma; ii) la toma de muestras de aguas de algunos acuíferos seleccionados con el fin de realizar su estudio hidrogeoquímico e isotópico; iii) la caracterización mineralógica, petrográfica, geoquímica e isotópica de los travertinos precipitados a partir de las aguas de algunos de los sondeos de la cuenca; y iv) la medida y caracterización química e isotópica de los gases libres y disueltos detectados en la cuenca, con especial atención al CO2 y 222Rn. Esta información, desarrollada en capítulos independientes, ha permitido realizar un modelo conceptual de funcionamiento del sistema natural que constituye la cuenca de Ganuelas-Mazarrón, así como establecer las analogías entre este y un AGP-CO2, con posibles escapes naturales y/o antropogénicos. La aplicación de toda esta información ha servido, por un lado, para predecir el comportamiento y evaluar la seguridad, a corto, medio y largo plazo, de un AGP-CO2 y, por otro, proponer una metodología general aplicable al estudio de posibles emplazamientos de AGP-CO2 desde la perspectiva de los reservorios naturales de CO2. Los resultados más importantes indican que la cuenca de Ganuelas-Mazarrón se trata de una cubeta o fosa tectónica delimitada por fallas normales, con importantes saltos verticales, que hunden al substrato rocoso (Complejo Nevado-Filabride), y rellenas, generalmente, por materiales volcánicos-subvolcánicos ácidos. Además, esta cuenca se encuentra rellena por formaciones menos resistivas que son, de muro a techo, las margas miocenas, predominantes y casi exclusivas de la cuenca, y los conglomerados y gravas pliocuaternarias. El acuífero salino profundo y enriquecido en CO2, puesto de manifiesto por la xx exploración geotérmica realizada en dicha cuenca durante la década de los 80 y objeto principal de este estudio, se encuentra a techo de los materiales del Complejo Nevado-Filabride, a una profundidad que podría superar los 800 m, según los datos de la investigación mediante sondeos y geofísica. Por ello, no se descarta la posibilidad de que el CO2 se encuentre en estado supe critico, por lo que la citada cuenca reuniría las características principales de un almacenamiento geológico natural y profundo de CO2, o análogo natural de un AGP-CO2 en un acuífero salino profundo. La sobreexplotación de los acuíferos mas someros de la cuenca, con fines agrícolas, origino, por el descenso de sus niveles piezométricos y de la presión hidrostática, el ascenso de las aguas profundas, salinas y enriquecidas en CO2, las cuales son las responsables de la contaminación de dichos acuíferos. El estudio hidrogeoquímico de las aguas de los acuíferos investigados muestra una gran variedad de hidrofacies, incluso en aquellos de litología similar. La alta salinidad de estas aguas las hace inservibles tanto para el consumo humano como para fines agrícolas. Además, el carácter ligeramente ácido de la mayoría de estas aguas determina que tengan gran capacidad para disolver y transportar, hacia la superficie, elementos pesados y/o tóxicos, entre los que destaca el U, elemento abundante en las rocas volcánicas ácidas de la cuenca, con contenidos de hasta 14 ppm, y en forma de uraninita submicroscópica. El estudio isotópico ha permitido discernir el origen, entre otros, del C del DIC de las aguas (δ13C-DIC), explicándose como una mezcla de dos componentes principales: uno, procedente de la descomposición térmica de las calizas y mármoles del substrato y, otro, de origen edáfico, sin descartar una aportación menor de C de origen mantélico. El estudio de los travertinos que se están formando a la salida de las aguas de algunos sondeos, por la desgasificación rápida de CO2 y el consiguiente aumento de pH, ha permitido destacar este fenómeno, por analogía, como alerta de escapes de CO2 desde un AGP-CO2. El análisis de los gases disueltos y libres, con especial atención al CO2 y al 222Rn asociado, indican que el C del CO2, tanto disuelto como en fase libre, tiene un origen similar al del DIC, confirmándose la menor contribución de CO2 de origen mantélico, dada la relación R/Ra del He existente en estos gases. El 222Rn sería el generado por el decaimiento radiactivo del U, particularmente abundante en las rocas volcánicas de la cuenca, y/o por el 226Ra procedente del U o del existente en los yesos mesinienses de la cuenca. Además, el CO2 actúa como carrier del 222Rn, hecho evidenciado en las anomalías positivas de ambos gases a ~ 1 m de profundidad y relacionadas principalmente con perturbaciones naturales (fallas y contactos) y antropogénicas (sondeos). La signatura isotópica del C a partir del DIC, de los carbonatos (travertinos), y del CO2 disuelto y libre, sugiere que esta señal puede usarse como un excelente trazador de los escapes de CO2 desde un AGPCO2, en el cual se inyectara un CO2 procedente, generalmente, de la combustión de combustibles fósiles, con un δ13C(V-PDB) de ~ -30 ‰. Estos resultados han permitido construir un modelo conceptual de funcionamiento del sistema natural de la cuenca de Ganuelas-Mazarrón como análogo natural de un AGP-CO2, y establecer las relaciones entre ambos. Así, las analogías mas importantes, en cuanto a los elementos del sistema, serian la existencia de: i) un acuífero salino profundo enriquecido en CO2, que seria análoga a la formación almacén de un AGPxxi CO2; ii) una formación sedimentaria margosa que, con una potencia superior a 500 m, se correspondería con la formación sello de un AGP-CO2; y iii) acuíferos mas someros con aguas dulces y aptas para el consumo humano, rocas volcánicas ricas en U y fallas que se encuentran selladas por yesos y/o margas; elementos que también podrían concurrir en un emplazamiento de un AGP-CO2. Por otro lado, los procesos análogos mas importantes identificados serian: i) la inyección ascendente del CO2, que seria análoga a la inyección de CO2 de origen antropogénico, pero este con una signatura isotópica δ13C(V-PDB) de ~ -30 ‰; ii) la disolución de CO2 y 222Rn en las aguas del acuífero profundo, lo que seria análogo a la disolución de dichos gases en la formación almacén de un AGP-CO2; iii) la contaminación de los acuíferos mas someros por el ascenso de las aguas sobresaturadas en CO2, proceso que seria análogo a la contaminación que se produciría en los acuíferos existentes por encima de un AGP-CO2, siempre que este se perturbara natural (reactivación de fallas) o artificialmente (sondeos); iv) la desgasificación (CO2 y gases asociados, entre los que destaca el 222Rn) del acuífero salino profundo a través de sondeos, proceso análogo al que pudiera ocurrir en un AGP-CO2 perturbado; y v) la formación rápida de travertinos, proceso análogo indicativo de que el AGP-CO2 ha perdido su estanqueidad. La identificación de las analogías más importantes ha permitido, además, analizar y evaluar, de manera aproximada, el comportamiento y la seguridad, a corto, medio y largo plazo, de un AGP-CO2 emplazado en un contexto geológico similar al sistema natural estudiado. Para ello se ha seguido la metodología basada en el análisis e identificación de los FEPs (Features, Events and Processes), los cuales se han combinado entre sí para generar y analizar diferentes escenarios de evolución del sistema (scenario analysis). Estos escenarios de evolución identificados en el sistema natural perturbado, relacionados con la perforación de sondeos, sobreexplotación de acuíferos, precipitación rápida de travertinos, etc., serian análogos a los que podrían ocurrir en un AGP-CO2 que también fuera perturbado antropogénicamente, por lo que resulta totalmente necesario evitar la perturbación artificial de la formación sello del AGPCO2. Por último, con toda la información obtenida se ha propuesto una metodología de estudio que pueda aplicarse al estudio de posibles emplazamientos de un AGP-CO2 desde la perspectiva de los reservorios naturales de CO2, sean estancos o no. Esta metodología comprende varias fases de estudio, que comprendería la caracterización geológico-estructural del sitio y de sus componentes (agua, roca y gases), la identificación de las analogías entre un sistema natural de almacenamiento de CO2 y un modelo conceptual de un AGP-CO2, y el establecimiento de las implicaciones para el comportamiento y la seguridad de un AGP-CO2. ABSTRACT The accumulation of the anthropogenic greenhouse gases in the atmosphere is the main responsible for: i) the increase in the average temperature of the Earth over the past century by almost 1 °C; ii) the rise in the mean sea level; iii) the drop of the ice volume and terrestrial snow; iv) the strong climate variability and extreme weather events that have been happening over the last decades; and v) the spread of epidemics and infectious diseases. All of these events are just some of the evidence of current climate change. The problems and growing concern related to these phenomena, prompted the adoption of the so-called "Kyoto Protocol" (Japan) in 1997, in which the signatory countries established different measurements to control and reduce the emissions of the greenhouse gases. These measurements include the CCS technologies, focused on the capture, transport and storage of CO2. Within this context, it was approved, in October 2008, the Strategic Singular Project "Tecnologías avanzadas de generación, captura y almacenamiento de CO2" (PSE-120000-2008-6), supported by the Ministry of Science and Innovation and the FEDER funds. This Project, by means of the Subproject "Geological Storage of CO2" (PSS- 120000-2008-31), was focused on the detailed study of the Natural Analogue of CO2 Storage and Leakage located in the Ganuelas-Mazarron Tertiary basin (Murcia), among other Spanish Natural Analogues. This research work has been performed in the framework of this Subproject, being its final objective to predict the behaviour and evaluate the safety, at short, medium and long-term, of a CO2 Deep Geological Storage (CO2-DGS) by means of a comprehensive study of the abovementioned Natural Analogue. This study comprises: i) the geological and hydrogeological context of the basin and its geophysical research; ii) the water sampling of the selected aquifers to establish their hydrogeochemical and isotopic features; iii) the mineralogical, petrographic, geochemical and isotopic characterisation of the travertines formed from upwelling groundwater of several hydrogeological and geothermal wells; and iv) the measurement of the free and dissolved gases detected in the basin, as well as their chemical and isotopic characterisation, mainly regarding CO2 and 222Rn. This information, summarised in separate chapters in the text, has enabled to build a conceptual model of the studied natural system and to establish the analogies between both the studied natural system and a CO2-DGS, with possible natural and/or anthropogenic escapes. All this information has served, firstly, to predict the behaviour and to evaluate the safety, at short, medium and long-term, of a CO2-DGS and, secondly, to propose a general methodology to study suitable sites for a CO2-DGS, taking into account the lessons learned from this CO2 natural reservoir. The main results indicate that the Ganuelas-Mazarron basin is a graben bounded by normal faults with significant vertical movements, which move down the metamorphic substrate (Nevado-Filabride Complex), and filled with acid volcanic-subvolcanic rocks. Furthermore, this basin is filled with two sedimentary formations: i) the Miocene marls, which are predominant and almost exclusive in the basin; xxiv and ii) the Plio-Quaternary conglomerates and gravels. A deep saline CO2-rich aquifer was evidenced in this basin as a result of the geothermal exploration wells performed during the 80s, located just at the top of the Nevado-Filabride Complex and at a depth that could exceed 800 m, according to the geophysical exploration performed. This saline CO2-rich aquifer is precisely the main object of this study. Therefore, it is not discarded the possibility that the CO2 in this aquifer be in supercritical state. Consequently, the aforementioned basin gathers the main characteristics of a natural and deep CO2 geological storage, or natural analogue of a CO2-DGS in a deep saline aquifer. The overexploitation of the shallow aquifers in this basin for agriculture purposes caused the drop of the groundwater levels and hydrostatic pressures, and, as a result, the ascent of the deep saline and CO2-rich groundwater, which is the responsible for the contamination of the shallow and fresh aquifers. The hydrogeochemical features of groundwater from the investigated aquifers show the presence of very different hydrofacies, even in those with similar lithology. The high salinity of this groundwater prevents the human and agricultural uses. In addition, the slightly acidic character of most of these waters determines their capacity to dissolve and transport towards the surface heavy and/or toxic elements, among which U is highlighted. This element is abundant in the acidic volcanic rocks of the basin, with concentrations up to 14 ppm, mainly as sub-microscopic uraninite crystals. The isotopic study of this groundwater, particularly the isotopic signature of C from DIC (δ13C-DIC), suggests that dissolved C can be explained considering a mixture of C from two main different sources: i) from the thermal decomposition of limestones and marbles forming the substrate; and ii) from edaphic origin. However, a minor contribution of C from mantle degassing cannot be discarded. The study of travertines being formed from upwelling groundwater of several hydrogeological and geothermal wells, as a result of the fast CO2 degassing and the pH increase, has allowed highlighting this phenomenon, by analogy, as an alert for the CO2 leakages from a CO2-DGS. The analysis of the dissolved and free gases, with special attention to CO2 and 222Rn, indicates that the C from the dissolved and free CO2 has a similar origin to that of the DIC. The R/Ra ratio of He corroborates the minor contribution of CO2 from the mantle degassing. Furthermore, 222Rn is generated by the radioactive decay of U, particularly abundant in the volcanic rocks of the basin, and/or by 226Ra from the U or from the Messinian gypsum in the basin. Moreover, CO2 acts as a carrier of the 222Rn, a fact evidenced by the positive anomalies of both gases at ~ 1 m depth and mainly related to natural (faults and contacts) and anthropogenic (wells) perturbations. The isotopic signature of C from DIC, carbonates (travertines), and dissolved and free CO2, suggests that this parameter can be used as an excellent tracer of CO2 escapes from a CO2-DGS, in which CO2 usually from the combustion of fossil fuels, with δ13C(V-PDB) of ~ -30 ‰, will be injected. All of these results have allowed to build a conceptual model of the behaviour of the natural system studied as a natural analogue of a CO2-DGS, as well as to establish the relationships between both natural xxv and artificial systems. Thus, the most important analogies, regarding the elements of the system, would be the presence of: i) a deep saline CO2-rich aquifer, which would be analogous to the storage formation of a CO2-DGS; ii) a marly sedimentary formation with a thickness greater than 500 m, which would correspond to the sealing formation of a CO2-DGS; and iii) shallow aquifers with fresh waters suitable for human consumption, U-rich volcanic rocks, and faults that are sealed by gypsums and/or marls; geological elements that could also be present in a CO2-DGS. On the other hand, the most important analogous processes identified are: i) the upward injection of CO2, which would be analogous to the downward injection of the anthropogenic CO2, this last with a δ13C(V-PDB) of ~ -30 ‰; ii) the dissolution of CO2 and 222Rn in groundwater of the deep aquifer, which would be analogous to the dissolution of these gases in the storage formation of a CO2-DGS; iii) the contamination of the shallow aquifers by the uprising of CO2-oversaturated groundwater, an analogous process to the contamination that would occur in shallow aquifers located above a CO2-DGS, whenever it was naturally (reactivation of faults) or artificially (wells) perturbed; iv) the degassing (CO2 and associated gases, among which 222Rn is remarkable) of the deep saline aquifer through wells, process which could be similar in a perturbed CO2- DGS; v) the rapid formation of travertines, indicating that the CO2-DGS has lost its seal capacity. The identification of the most important analogies has also allowed analysing and evaluating, approximately, the behaviour and safety in the short, medium and long term, of a CO2-DGS hosted in a similar geological context of the natural system studied. For that, it has been followed the methodology based on the analysis and identification of FEPs (Features, Events and Processes) that have been combined together in order to generate and analyse different scenarios of the system evolution (scenario analysis). These identified scenarios in the perturbed natural system, related to boreholes, overexploitation of aquifers, rapid precipitation of travertines, etc., would be similar to those that might occur in a CO2-DGS anthropogenically perturbed, so that it is absolutely necessary to avoid the artificial perturbation of the seal formation of a CO2-DGS. Finally, a useful methodology for the study of possible sites for a CO2-DGS is suggested based on the information obtained from this investigation, taking into account the lessons learned from this CO2 natural reservoir. This methodology comprises several phases of study, including the geological and structural characterisation of the site and its components (water, rock and gases), the identification of the analogies between a CO2 storage natural system and a conceptual model of a CO2-DGS, and the implications regarding the behaviour and safety of a CO2-DGS.
Resumo:
Analogue modelling experiments using brittle materials are performed to study the inversion of extensional structures. Asymmetric grabens of two different orientations are first created during a phase of extension and progressively filled. They are subsequently shortened in the same direction. The aim of our experiments is to determine factors affecting the style of deformation during inversion. We specifically investigate variations in thickness and distribution of strong and weak layers constituting the graben fill and in initial basin orientation. The main advantage of our experimental set-up is that we have a complete control on graben location, width, infill and orientation before inversion. The experiments show that shortening results only in limited reactivation of pre-existing normal faults. In general, forward thrusts and backthrusts cut across normal faults into the footwall of the graben. The forward thrusts either propagate parallel to the enveloping surface of faulted blocks or they cut across basin-limiting normal faults at various angles. The graben fill is mechanically extruded by displacement along forward thrusts that accommodate most of the shortening. Both pre-existing faults and weak graben fill act as zones of weakness during inversion and determine the orientation and location of both backthrusts and forward thrusts. The results of our experiments conform well to natural examples of inverted graben structures.
Resumo:
During the last 8 m.y. the Papuan Peninsula region of Papua New Guinea has been affected by extension which opened the Woodlark Basin. The present-day spreading tip is located at the foot of the Moresby Seamount, a crustal block whose northern flank is an active low-angle normal fault related to this extension. During Ocean Drilling Program Leg 180 (7 June-11 August 1998), 11 sites (1108-1118) were drilled along a north-south-trending transect across the Woodlark Basin just ahead of the spreading tip. Four of these sites (1118, 1109, 1114, and 1117) reached the crystalline basement, which is composed of diabase and gabbro. Sites 1118 and 1109, located on the Woodlark Rise, belong to the hanging wall block, and Sites 1114 and 1117, located on the crest of the Moresby Seamount, belong to the footwall block and the fault zone itself. Most of the basalt, diabase, and gabbro that were recovered show a well-preserved magmatic texture. The diabase, which is the most abundant rock type, has a coarse-grained ophitic texture composed of poikilitic clinopyroxene including radiating, locally skeletal plagioclase laths with interstitial iron oxide grains. Secondary mineralogy consists of chlorite, zeolite, calcite, albite, and quartz. The gabbro shows a medium-grained granular texture. The magmatic mineralogy consists of euhedral laths of plagioclase and anhedral interstitial clinopyroxene. Secondary mineralogy consists of a magnesio to actinolitic hornblende, chlorite, clinozoisite, zeolite, quartz, and calcite. The retrograde metamorphic evolution of both gabbro and diabase occurred under low amphibolite to subgreenschist facies conditions associated mainly with brittle deformation and the development of a local low-temperature shear zone. This shows no evidence for high thermal gradient in the crust during the continental rifting.
Resumo:
Petrographic and geochemical analyses of basaltic rocks dredged from the first segment of the Southwest Indian Ridge near the Rodriguez Triple Junction have been completed in order to investigate water-rock interaction processes during mid-ocean ridge (MOR) hydrothermal alteration in the Indian Ocean. In the study area, we have successfully recovered a serial section of upper oceanic crust exposed along a steep rift valley wall which was uplifted and emplaced along a low angle normal fault. On the basis of microscopic observation, dredged samples are classified into three types: fresh lavas, low-temperature altered rocks, and high-temperature altered rocks. The fresh lavas have essentially the same chemical composition as typical N-MORB, although LILE and Nb are slightly enriched and depleted, respectively. Low temperature alteration brought about the enrichment of K2O, Rb, and U due to the presence of K-rich celadonite and U-adsorption onto Fe-oxyhydroxide and clay minerals. On the other hand, chloritization, albitization, and addition of base metals by high temperature hydrothermal alteration result in enrichments of MnO, MgO, Na2O, Cu, and Zn and depletions of CaO, K2O, Cr, Co, Ni, Rb, Sr, and Ba. In addition, U-enrichment is also observable in the high temperature altered rocks probably due to the decrease of uranite solubility in the reducing high-temperature hydrothermal solution. These petrological and geochemical features are comparable to those of the volcanic zone to transition zone rocks in the DSDP/ODP Hole 504B, indicating that our samples were recovered from the upper ~1000 m section of the oceanic crust. Only the alteration minerals related to off-axis alteration are absent in our samples dredged from near the spreading axis. The similarity of alteration between our samples from the Indian Ocean and the Hole 504B rocks from the Pacific Ocean suggests that MOR hydrothermal systems are probably similar across all world oceans.
Resumo:
Pipelines extend thousands of kilometers across wide geographic areas as a network to provide essential services for modern life. It is inevitable that pipelines must pass through unfavorable ground conditions, which are susceptible to natural disasters. This thesis investigates the behaviour of buried pressure pipelines experiencing ground distortions induced by normal faulting. A recent large database of physical modelling observations on buried pipes of different stiffness relative to the surrounding soil subjected to normal faults provided a unique opportunity to calibrate numerical tools. Three-dimensional finite element models were developed to enable the complex soil-structure interaction phenomena to be further understood, especially on the subjects of gap formation beneath the pipe and the trench effect associated with the interaction between backfill and native soils. Benchmarked numerical tools were then used to perform parametric analysis regarding project geometry, backfill material, relative pipe-soil stiffness and pipe diameter. Seismic loading produces a soil displacement profile that can be expressed by isoil, the distance between the peak curvature and the point of contraflexure. A simplified design framework based on this length scale (i.e., the Kappa method) was developed, which features estimates of longitudinal bending moments of buried pipes using a characteristic length, ipipe, the distance from peak to zero curvature. Recent studies indicated that empirical soil springs that were calibrated against rigid pipes are not suitable for analyzing flexible pipes, since they lead to excessive conservatism (for design). A large-scale split-box normal fault simulator was therefore assembled to produce experimental data for flexible PVC pipe responses to a normal fault. Digital image correlation (DIC) was employed to analyze the soil displacement field, and both optical fibres and conventional strain gauges were used to measure pipe strains. A refinement to the Kappa method was introduced to enable the calculation of axial strains as a function of pipe elongation induced by flexure and an approximation of the longitudinal ground deformations. A closed-form Winkler solution of flexural response was also derived to account for the distributed normal fault pattern. Finally, these two analytical solutions were evaluated against the pipe responses observed in the large-scale laboratory tests.
Resumo:
New morpho-bathymetric and tectono-stratigraphic data on Naples and Salerno Gulfs, derived from bathymetric and seismic data analysis and integrated geologic interpretation are here presented. The CUBE(Combined Uncertainty Bathymetric Estimator) method has been applied to complex morphologies, such as the Capri continental slope and the related geological structures occurring in the Salerno Gulf.The bathymetric data analysis has been carried out for marine geological maps of the whole Campania continental margin at scales ranging from 1:25.000 to 1:10.000, including focused examples in Naples and Salerno Gulfs, Naples harbour, Capri and Ischia Islands and Salerno Valley. Seismic data analysis has allowed for the correlation of main morpho-structural lineaments recognized at a regional scale through multichannel profiles with morphological features cropping out at the sea bottom, evident from bathymetry.Main fault systems in the area have been represented on a tectonic sketch map, including the master fault located northwards to the Salerno Valley half graben. Some normal faults parallel to the master fault have been interpreted from the slope map derived from bathymetric data. A complex system of antithetic faults bound two morpho-structural highs located 20km to the south of the Capri Island. Some hints of compressional reactivation of normal faults in an extensional setting involving the whole Campania continental margin have been shown from seismic interpretation.
Resumo:
Subduction of a narrow slab of oceanic lithosphere beneath a tightly curved orogenic arc requires the presence of at least one lithospheric scale tear fault. While the Calabrian subduction beneath southern Italy is considered to be the type example of this geodynamic setting, the geometry, kinematics and surface expression of the associated lateral, slab tear fault offshore eastern Sicily remain controversial. Results from a new marine geophysical survey conducted in the Ionian Sea, using high-resolution bathymetry and seismic profiling reveal active faulting at the seafloor within a 140 km long, two-branched fault system near Alfeo Seamount. The previously unidentified 60 km long NW trending North Alfeo Fault system shows primarily strike-slip kinematics as indicated by the morphology and steep-dipping transpressional and transtensional faults. Available earthquake focal mechanisms indicate dextral strike-slip motion along this fault segment. The 80 km long SSE trending South Alfeo fault system is expressed by one or two steeply dipping normal faults, bounding the western side of a 500+ m thick, 5 km wide, elongate, syntectonic Plio-Quaternary sedimentary basin. Both branches of the fault system are mechanically capable of generating magnitude 6-7 earthquakes like those that struck eastern Sicily in 1169, 1542, and 1693.
Resumo:
The Late Cretaceous to Modern tectonic evolution of central and eastern California has been studied for many decades, with published work generally focusing on specific geographic areas and time periods. The resulting literature leaves the reader, whether graduate student, faculty member, or layperson, wondering what a coherently integrated tectonic evolution might look like, or if it would be at all possible to undertake such a task. This question is the common thread weaving together the four studies presented in this work. Each of the individual chapters is targeted at a specific location and time period which I have identified as a critical yet missing link in piecing together a coherent regional tectonic story. In the first chapter, we re-discover a set of major west down normal faults running along the western slope of the southern Sierra, the western Sierra fault system (WSFS). We show that one of these faults was offset by roughly a kilometer in Eocene time, and that this activity directly resulted in the incision of much of the relief present in modern Kings Canyon. The second chapter is a basement landscape and thermochronometric study of the hanging wall of the WSFS. New data from this study area provide a significant westward expansion of basement thermochronometric data from the southern Sierra Nevada batholith. Thermal modeling results of these data provide critical new constraints on the early exhumation of the Sierra Nevada batholith, and in the context of the results from Chapter I, allow us to piece together a coherent chronology of tectonic forcings and landscape evolution for the southern Sierra Nevada. In the third chapter, I present a study of the surface rupture of the 1999 Hector Mine earthquake, a dextral strike slip event on a fault in the Eastern California Shear Zone (ECSZ). New constraints on the active tectonics in ECSZ will help future studies better resolve the enigmatic mismatch between geologic slip rates and geodetically determined regional rates. Chapter IV is a magnetostratigraphic pilot study of the Paleocene Goler Formation. This study provides strong evidence that continued investigation will yield new constraints on the depositional age of the only fossil-bearing Paleocene terrestrial deposit on the west coast of North America. Each of these studies aims to provide important new data at critical missing links in the tectonic evolution of central and eastern California.
Resumo:
This thesis has the aim to give an overview about the tectonic history of the Epiligurian units, which crop out in the axial portion of the Northern Apennines fold-and-thrust belt, from a structural and thermal point of view, through a multiscalar and multitecnique approach. I focused on a key example of Epiligurian wedge-top basin, (Marzabotto Basin) proceeding from macro-to-microscale approach. The study started from a remote sensing analysis of the lineaments and morphostructures which affected the study area to obtain the regional faulting pattern and an overview about the main tectonic structures, used as basis for the structural investigation at the mesoscale. On the basis of this, it was possible to reconstruct the succession of tectonic events that affected the Marzabotto Basin, consisting in: i) two sets of thrusts indicating a NE-SW and NW-SE shortening of the sedimentary succession; ii) NE-SW-left lateral transtensional faults related to a strike-slip tectonic phase; iii) three main sets of extensional structures which cut and displace the previous thrusts. Normal faults are related to the post-orogenic evolution and have been dated with U-Th method, getting an age of Middle-Late Pleistocene. From a thermal point of view, apatite fission-tracks and (U-Th)/He analyses of detrital minerals and thermal modelling on the middle-upper Eocene siliciclastic deposits allowed me to better constrain the local exhumation history and correlate it with the large-scale tectonic evolution of the Northern Apennines. In particular, the Marzabotto Basin experienced a complex burial-exhumation history, consisting in two cooling cooling phases related to the growth of the Northern Apennines belt (Oligo-Miocene in age) and a later cooling which tracks the accretion in the orogenic wedge concomitant with rollback-driven extension (late Miocene-Pliocene in age). In conclusion it is possible to affirm that the study shed new light on poorly constrained elements of fold-and-thrust belt.
Resumo:
This paper presents a comparative study of computational fluid dynamics (CFD) and analytical and semiempirical (ASE) methods applied to the prediction of the normal force and moment coefficients of an autonomous underwater vehicle (AUV). Both methods are applied to the. bare hull of the vehicle and to the body-hydroplane combination. The results are validated through experiments in a towing tank. It is shown that the CFD approach allows for a good prediction of the coefficients over the range of angles of attack considered. In contrast with the traditional ASE formulations used in naval and aircraft fields, an improved methodology is introduced that takes advantage of the qualitative information obtained from CFD flow visualizations.
Resumo:
Pós-graduação em Odontologia - FOAR