Organizational maintenance repair parts and special tools list for launcher and M48A5 tank chassis, transporting, for bridge, armored-vehicle-launched, scissoring type, class 60 5420-01-076-6096.

Includes index.

Organizational, direct support, and general support maintenance manual : launcher, M48A5 tank chassis, transporting, for bridge, armored-vehicle-launched, scissoring type, class 60 (NSN 5420-01-076-6096).

"October 1981."

Installation of radio set AN/GRC-106 in carrier, armored, personnel, M114 or M114A1.

"29 April 1966."

Instructions for installing radio set AN/VRC-12, AN/VRC-46, AN/VRC-47, or AN/VRC-53, and intercommunication set AN/VIC-1(V) installation units in armored reconnaissance airborne assault vehicle XM551.

"7 September 1966."

Comb-like acrylic-based polymer latexes containing nano-sized crystalline or liquid crystalline domains

306 p.

A cave population of Isbrueckerichthys alipionis (Gosline, 1947) in the Upper Ribeira karst area, southeastern Brazil (Siluriformes: Loricariidae)

A cave population of the armored catfish Isbrueckerichthys alipionis is reported from the Santana Cave, in the rio Betari watershed, Upper Ribeira karst area, Iporanga, São Paulo State, southeastern Brazil. The cave population was compared to an epigean population of I. alipionis and no significant differences where found in morphology or degree of pigmentation. As the cave population is known for at least 30 years and is apparently isolated from epigean streams, it is classified as troglophilic. The discovery of this troglophilic species in the Santana Cave is an additional strong argument for the conservation of that cave.

Systematics of Lamontichthys Miranda-Ribeiro (Siluriformes: Loricariidae), with the description of two new species

The taxonomic revision of the genus Lamontichthys Miranda-Ribeiro, based on the examination of 164 specimens of different river drainages throughout the Amazon basin, revealed the presence of six species of which two are new. Lamontichthys filamentosus occurs in the upper and middle portions of the rio Amazonas basin; L. llanero in the río Orinoco basin; L. maracaibero in the lago Maracaibo basin; and L. stibaros in the upper río Amazonas basin. Lamontichthys avacanoeiro, new species, occurs in the upper rio Tocantins basin; and L. parakana, new species, in the lower rio Tocantins basin. The new species represent a considerable extension in the so far known distribution of the genus. A parsimony analysis, including 87 osteological and external morphological characters from Lamontichthys and related taxa (total of 16), resulted in three most parsimonious trees with 194 steps (CI = 0.73 and RI = 0.78). The hypothesis of monophyly of Lamontichthys is corroborated and supported by six derived characters. Within Lamontichthys two monophyletic assemblages are recognized, one includes L. avacanoeiro and L. stibaros, the other includes L. maracaibero and the clade formed by L. filamentosus and L. llanero. The relationships of Lamontichthys parakana, a species that was not included in the phylogenetic analysis is discussed. The monophyly and relationships of the monotypic genus Pterosturisoma microps are also discussed.

A new species of Rineloricaria (Siluriformes: Loricariidae: Loricariinae) from rio Daraá, rio Negro basin, Amazon, Brazil

Rineloricaria daraha, new species, is described from the rio Daraá, tributary of rio Negro, northwestern Amazonas State, Brazil. The new species is diagnosed by having seven branched pectoral-fin rays, finger-like papillae on the lower lip, a large multi-angular preanal plate, and at least four quadrangular plates of variable size surrounding the preanal plate. The new species is known only from rio Daraá and its waterfalls.

Intergeneric phylogenetic relationships in catfishes of the Loricariinae (Siluriformes: Loricariidae), with the description of Fonchiiloricaria nanodon: a new genus and species from Peru

Recent investigations in the upper Rio Huallaga in Peru revealed the presence of an intriguing species of the Loricariinae. To characterize and place this species within the evolutionary tree of the subfamily, a molecular phylogeny of this group was inferred based on the 12S and 16S mitochondrial genes and the nuclear gene F-reticulon4. The phylogeny indicated that this distinctive species was a member of the subtribe Loricariina. Given its phylogenetic placement, and its unusual morphology, this species is described as a new genus and new species of Loricariinae: Fonchiiloricaria nanodon. This new taxon is diagnosed by usually possessing one to three premaxillary teeth that are greatly reduced; lips with globular papillae on the surface; the distal margin of lower lip bearing short, triangular filaments; the premaxilla greatly reduced; the abdomen completely covered by plates, with the plates between lateral abdominal plates small and rhombic; a caudal fin with 14 rays; the orbital notch absent; five lateral series of plates; dorsal-fin spinelet absent; preanal plate present, large and solid, and of irregular, polygonal shape, the caudal peduncle becoming more compressed posteriorly for the last seven to 10 plates. (C) 2011 The Authors Journal of Fish Biology (C) 2011 The Fisheries Society of the British Isles

Is it possible to remove polymeric nanoparticles from aqueous paints during the activated sludge treatment?

The market for emulsion polymers (latexes) is large and growing at the expense of other manufacturing processes that emit higher amounts of volatile organic solvents. The paint industry is not an exception and solvent-borne paints have been gradually substituted by aqueous paints. In their life-cycle, much of the aqueous paint used for architectural or decorative purposes will eventually be discharged into wastewater treatment facilities, where its polymeric nanoparticles (mainly acrylic and styrene-acrylic) can work as xenobiotics to the microbial communities present in activated sludge. It is well established that these materials are biocompatible at macroscopic scale. But is their behaviour the same at nanoscale? What happens to the polymeric nanoparticles during the activated sludge process? Do nanoparticles agregate and are discharged together with the sludge or remain in emulsion? How do microorganisms interact with these nanoparticles? Are nanoparticles degradated by them? Are they adsorbed? Are these nanoparticles toxic to the microbial community? To study the influence of these xenobiotics in the activated sludge process, an emulsion of cross-linked poly(butyl methacrylate) nanoparticles of ca. 50 nm diameter was produced and used as model compound. Activated sludge from a wastewater treatment plant was tested by the OCDE’s respiration inhibition test using several concentrations of PBMA nanoparticles. Particle aggregation was followed by Dynamic Light Scattering and microorganism surfaces were observed by Atomic Force Microscopy. Using sequential batch reactors (SBRs) and continuous reactors, both inoculated with activated sludge, the consumption of carbon, ammonia, nitrite and nitrate was monitored and compared, in the presence and absence of nanoparticles. No particles were detected in all treated waters by Dynamic Light Scattering. This can either mean that microorganisms can efficiently remove all polymer nanoparticles or that nanoparticles tend to aggregate and be naturally removed by precipitation. Nevertheless respiration inhibition tests demonstrated that microorganisms consume more oxygen in the presence of nanoparticles, which suggests a stress situation. It was also observed a slight decrease in the efficiency of nitrification in the presence of nanoparticles. AFM images showed that while the morphology of some organisms remained the same both in the presence and absence of nanoparticles, others assumed a rough surface with hilly like shapes of ca. 50 nm when exposed to nanoparticles. Nanoparticles are thus likely to be either incorporated or adsorbed at the surface of some organisms, increasing the overall respiration rate and decreasing nitrification efficiency. Thus, despite its biocompatibility at macroscopic scale, PBMA is likely to be no longer innocuous at nanoscale.

Respiratory characteristics of Hoplostenum littorale (Siluriformes, Callichthyidae)

Hematological parameters, intraerythrocytic phosphates, hemoglobin, and whole blood Bohr effect of the South American armored catfish Hoplostenum littorale were studied during different seasons of the year. In addition, the degree of dependence on air breathing was determined for this species. The hematological parameters presented seasonal variations, which were not correlated to oxygen, temperature, and water level oscillations. Five anodic hemoglobin fractions were detected in starch gel electrophoresis. In addition to ATP, GTP and Fe-GTP being detected, 2,3-DPG was also detected in red blood cells of H. littorale. The latter is an intraerythrocytic phosphate characteristic to red blood cells of mammalians. The increased production of 2,3-DPG could be associated with decreasing Hb-O2 affinity and both features could be related to environmental temperature increase. Whole blood Bohr effect was influenced by water temperature. This study confirms H. littorale to be continuous and not obligate air breather, under all dissolved oxygen level conditions.

Fisheries and fishing effort at the Indigenous Reserves Ashaninka/Kaxinawá, river Breu, Brazil/Peru

This article aimed to describe the subsistence fisheries of traditional populations of three ethnic groups, one Ashaninka and two Kaxinawá, lying on the banks of the River Breu. Initially, monitors were trained to fill logbooks with data from fisheries of the villages during an annual cycle (august/1995 august/1996). Based on these data, it was realized an inventory of the most common fish species caught as well as one about the fishing environment. The following results were obtained: i) Indians prefer to use pools, locally known as "poços", for fishing; ii) the most common caught species are the "mandis" (35%, Pimelodidae), armored catfishes (Loricariidae), specially Hypostomus sp. (25%), the "curimatá" (9%, Prochilodus sp.) and the "saburus" (8%, Curimatidae), among others; iii) the fishing gears that lead to a high rate of fishing are the native "tingui", nets and bow and arrows; iv) fisheries are more intensive during summer; v) the fishing effort and their associated factors statistically significant in predicting the catches in the Indian Reserve were f1 = number of fishermen, f2 = (number of fishermen*total time devoted to fishing), f3 = [(number of fishermen)*(total time devoted to fishing)-(the time displacement)] and the factor villages and fishing gears; vi) although almost all the fisheries are done by walking to the fishing places, catches increase when paddle boats are used; and vii) the most active fishermen belong to Kaxinawá tribe.

Päällystetyn graafisen kartongin hajuominaisuudet

Diplomityön tavoitteena oli selvittää elintarvikepakkauksiin soveltuvan graafisen kartongin potentiaalinen hajun aiheuttaja. Lisäksi tavoitteena oli vähentää päällystetyn tasakoosteisen (SBS) kolmikerroskartongin hajutasoa keskittyen päällystyspastakomponentteihin sekä massaosaston jälkeen annosteltaviin kemikaaleihin. Kirjallisuusosassa tarkasteltiin eri kartonkilajeja, päällystyspastoja ja sen sisältämiä komponentteja, pääpainon ollessa kuitenkin kartongin hajuominaisuuksiin vaikuttavien tekijöiden selvittämisessä. Lisäksi luotiin katsaus kartonkien aistinvaraisiin ja instrumentaalisiin määritysmenetelmiin. Instrumentaalisista määritysmenetelmistä käsiteltiin headspace –kaasukromatografia (HSGC) sekä korkeanerotuskyvyn nestekromatografia yhdistettynä massaspektrometriin (HPLC/MS). Kokeellisen osan alussa kartoitettiin päällystyskemikaalien sekä liima- ja retentioaineiden haihtuvat yhdisteet HSGC- ja HPLC/MS –tekniikoiden avulla. Kaasukromatografisesti analysoidut kokonaishaihtuvien tasot eivät poikenneet normaaleista tasoista, joten jouduttiin siirtymään HPLC/MS –menetelmään. HPLC/MS –tekniikalla on päästy tutkimaan herkästi haihtuvien typpiyhdisteiden amiinipitoisuuksia. Kemikaalimittausten perusteella vaihdettiin potentiaaliset hajua aiheuttavat kemikaalit, kovete ja synteettinen paksuntaja, markkinoilla oleviin vaihtoehtoisiin kemikaaleihin ja suoritettiin pilot -koeajo sekä tehdasmittakaavaiset koeajot. Työssä perehdyttiin myös varastoinnin aiheuttamiin vaikutuksiin eri kartonkilaatujen aistinvaraisissa ominaisuuksissa. Päällystyspastan kemikaaleista suuren hajukuorman aiheuttavat kovete, dispergointiaine, päällystyspigmentit ja lateksit sekä synteettinen paksuntaja. Kovetteen annostelumäärä päällystyspastoihin on alhainen, mutta sen sisältämä ammoniakkipitoisuus on kuitenkin huomattavan suuri. Kovete ohjaakin lopputuotteen ammoniakkipitoisuutta. Merkittävän metyyliamiinikuorman sisältää dispergointiaine. Sen vaikutus lopputuotteeseen voidaan olettaa vähäiseksi johtuen kemikaalin pienestä määrästä pastassa. Päällystyspigmenttien ja lateksien korkea metyyliamiinikuorma voi puolestaan aiheuttaa lopputuotteeseen huomattavan hajukuorman johtuen niiden suurista annostelumääristä. Eri synteettisille paksuntajille tehtyjen tutkimusten mukaan niiden hajukuormat olivat hyvin samankaltaisia ja vaikutus lopputuotteen kokonaishajutasoon jäi pieneksi. Aistinvaraisesti tarkasteltuna eri kartonkilaaduille saadaan eri hajutasoja. Elintarvikepakkauksiin soveltuvan graafisen kartongin hajutasot olivat korkeita muihin kartonkilaatuihin nähden niin tuoreena kuin varastoinnin jälkeen. Erityisesti tuoreen kartonkinäytteen metyyliamiinipitoisuus ylitti hajukynnyksen. Käytetty lateksi, kovete ja synteettinen paksuntaja näyttävät muodostavan niin tiiviin hajua koteloivan päällystekerroksen kartongin pinnalle, että hajua vapautuu pitkällä aikavälillä. Myös varastointi tiiviinä pakkauksena estää amiinien haihtumisen. Tutkimusten mukaan ammoniakkivapaalla PZC –kovetteella saadaan alennettua graafisen kartongin ammoniakkikuormaa huomattavasti. Tämä on vaikuttamassa myös lopputuotteen hajutasoon, jota on mahdollisuus alentaa käyttämällä ammoniakkivapaata kovetetta.

Enhancing performance of paper coatings by tailor-made plastic pigments

The paper industry is constantly looking for new ideas for improving paper products while competition and raw material prices are increasing. Many paper products are pigment coated. Coating layer is the top layer of paper, thus by modifying coating pigment also the paper itself can be altered and value added to the final product. In this thesis, synthesis of new plastic and hybrid pigments and their performance in paper and paperboard coating is reported. Two types of plastic pigments were studied: core-shell latexes and solid beads of maleimide copolymers. Core-shell latexes with partially crosslinked hydrophilic polymer core of poly(n-butyl acrylate-co-methacrylic acid) and a hard hydrophobic polystyrene shell were prepared to improve the optical properties of coated paper. In addition, the effect of different crosslinkers was analyzed and the best overall performance was achieved by the use of ethylene glycol dimethacrylate (EGDMA). Furthermore, the possibility to modify core-shell latex was investigated by introducing a new polymerizable optical brightening agent, 1-[(4-vinylphenoxy)methyl]-4-(2-henylethylenyl)benzene which gave promising results. The prepared core-shell latex pigments performed smoothly also in pilot coating and printing trials. The results demonstrated that by optimizing polymer composition, the optical and surface properties of coated paper can be significantly enhanced. The optimal reaction conditions were established for thermal imidization of poly(styrene-co-maleimide) (SMI) and poly(octadecene-co-maleimide) (OMI) from respective maleic anhydride copolymer precursors and ammonia in a solvent free process. The obtained aqueous dispersions of nanoparticle copolymers exhibited glass transition temperatures (Tg) between 140-170ºC and particle sizes from 50-230 nm. Furthermore, the maleimide copolymers were evaluated in paperboard coating as additional pigments. The maleimide copolymer nanoparticles were partly imbedded into the porous coating structure and therefore the full potential of optical property enhancement for paperboard was not achieved by this method. The possibility to modify maleimide copolymers was also studied. Modifications were carried out via N-substitution by replacing part of the ammonia in the imidization reaction with amines, such as triacetonediamine (TAD), aspartic acid (ASP) and fluorinated amines (2,2,2- trifluoroethylamine, TFEA and 2,2,3,3,4,4,4-heptafluorobuthylamine, HFBA). The obtained functional nanoparticles varied in size between 50-217 nm and their Tg from 150-180ºC. During the coating process the produced plastic pigments exhibited good runnability. No significant improvements were achieved in light stability with TAD modified copolymers whereas nanoparticles modified with aspartic acid and those containing fluorinated groups showed the desired changes in surface properties of the coated paperboard. Finally, reports on preliminary studies with organic-inorganic hybrids are presented. The hybrids prepared by an in situ polymerization reaction consisted of 30 wt% poly(styrene- co-maleimide) (SMI) and high levels of 70 wt% inorganic components of kaolin and/or alumina trihydrate. Scanning Electron Microscopy (SEM) images and characterization by Fourier Transform Infrared Spcetroscopy (FTIR) and X-Ray Diffraction (XRD) revealed that the hybrids had conventional composite structure and inorganic components were covered with precipitated SMI nanoparticles attached to the surface via hydrogen bonding. In paper coating, the hybrids had a beneficial effect on increasing gloss levels.

Miehistönkuljetusajoneuvon rungon suunnittelu

Tämän diplomityön tavoitteena oli suunnitella miehistönkuljetusajoneuvon runko. Rungosta suunniteltiin mahdollisimman hyvin energiaa absorboiva. Rakenne toteutettiin kennora-kenteena. Suunnittelussa sovellettiin koneensuunnittelun periaatteiden lisäksi energiaa ab-sorboivien rakenteiden suunnittelun periaatteita. Myös valmistustekniset näkökohdat otet-tiin huomioon. Rakenteessa hyödynnettiin Ruukki Oy:n Ramor 500 suojausterästä sekä OPTIM 500 MC terästä. Lisäksi erilaisten täyteaineiden käyttöä tutkittiin. Suunnittelun työkaluna käytettiin epälineaarista elementtimenetelmää, koska energiaa ab-sorboivien rakenteiden suunnittelussa on otettava huomioon materiaalien epälineaarinen käyttäytyminen. Rakenteen suunnittelu jakaantui viiteen vaiheeseen. Aluksi rakenteeseen kohdistuvat kuormitukset laskettiin elementtimenetelmän avulla. Esisuunnittelussa lasket-tiin plastisuusteorian avulla alustavasti tarvittavat materiaalipaksuudet. Tämän jälkeen ra-kenteen ydingeometria optimoitiin mahdollisimman hyvin energiaa absorboivaksi. Opti-moinnissa hyödynnettiin elementtimenetelmää. Seuraavassa vaiheessa varmistettiin raken-teen globaalit ominaisuudet. Lopuksi rakenteen kestävyyttä tarkasteltiin elementtimene-telmällä. Runko ei mallien mukaan kestänyt siltä vaadittuja kuormitustapauksia. Mallin kaikki ole-tukset pidettiin varmalla puolella. Reunaehdot oletettiin todellisuutta jäykemmiksi. Myös-kään materiaalin venymänopeudesta johtuvaa lujittumista ei otettu huomioon. Koska mii-naräjähdys on monimutkainen tapahtuma, rungon todellinen kestävyys joudutaan ar-viomaan räjähdystesteillä. Elementtimallien perusteella voidaan kuitenkin sanoa, että ener-giaa absorboiva ajoneuvon runko on mahdollista toteuttaa kennorakenteena. Lisäksi voi-daan todeta, että elementtimenetelmää sopii työvälineeksi tämän tyyppisten rakenteiden suunnitteluun.