Structural analysis of the Itapucumi Group in the Vallemi region, northern Paraguay: Evidence of a new Brasiliano/Pan-African mobile belt

The Neoproterozoic (Ediacaran) Itapucumi Group in northern Paraguay is composed of carbonate and siliciclastic rocks, including ooid grainstones, marls, shales and sandstones, containing Cloudina fossils in the eastern region. It is almost undeformed over the Rio Apa Cratonic Block but shows a strong deformational pattern at its western edge. A detailed structural analysis of the Itapucumi Group was conducted in the Vallemi Mine, along with a regional survey in other outcrops downstream in the Paraguay River and in the San Alfredo, Cerro Paiva and Sargent Jose E. Lopez regions. In the main Vallemi quarry, the structural style is characterized by an axial-plane slaty cleavage in open to isoclinal folds, sometimes overturned, associated with N-S trending thrust faults and shear zones of E-vergence and with a low-grade chlorite zone metamorphism. The structural data presented here are compatible with the hypothesis of a newly recognized mobile belt on the western side of the Rio Apa Cratonic Block, with opposite vergence to that of the Paraguay Mobile Belt in Brazil. Both belts are related to the Late Brasiliano/Pan-African tectonic cycle with a Lower Cambrian deformation and metamorphism age. The deformation could be due to the late collision of the Amazonian Craton with the remainder of Western Gondwana or to the western active plate boundary related to the Pampean Belt. The structural and lithologic differences between the western Itapucumi Group in the Vallemi and Paraguay River region and the eastern region, near San Alfredo and Cerro Paiva, suggest that this group could be divided into two lithostratigraphic units, but more stratigraphic and geochronological analyses are required to confirm this possibility. (C) 2010 Elsevier Ltd. All rights reserved.

O Acordo Antecipado de Preços – APA como solução para reduzir a insegurança jurídica na aplicação das regras de Preço de Transferência no Brasil

O presente trabalho monográfico é baseado fundamentalmente na comparação da legislação estrangeira e nos potenciais conflitos trazido pela doutrina brasileira na instituição de outros mecanismos de solução de controvérsias administrativos, já em operação no Brasil. Objetivando verificar a possibilidade de aplicação do Acordo Antecipado de Preços no direito brasileiro. Para tanto é verificado se o APA é uma forma eficiente de solução das inseguranças trazidas pela aplicabilidade das regras de preços de transferência em virtude da natureza específica das transações operacionalizadas entre pessoas vinculadas.

Reproductive indices in natural nests of giant Amazon river turtles Podocnemis expansa (Schweigger, 1812) (Testudines, Podocnemididae) in the Environmental Protection Area Meanders of the Araguaia river

Realizou-se a contagem dos ovos não eclodidos, dos filhotes vivos e mortos de Podocnemis expansa oriundos de 327 ninhos naturais, localizados nas praias da Área de Proteção Ambiental (APA) - Meandros do Rio Araguaia, onde se determinou a porcentagem de eclosão dos ovos (94,63%); não eclosão (5,37%); sobrevivência (94,24%) e mortalidade dos filhotes (5,76%), e a média de filhotes mortos durante os 15 dias no berçário (0,97%). A média do total de filhotes por ninho foi determinada pela soma do número de filhotes vivos e mortos divididos pelo total de ninhos, enquanto que a média do total de ovos por ninho foi determinada pela soma do número de filhotes vivos, mortos e ovos não eclodidos divididos pelo total de ninhos. Com isso, obtiveram-se os valores médios do número de filhotes vivos (88,98 ± 23,94); mortos (0,37 ± 0,93); ovos não eclodidos (5,07 ± 9,57), e total de ovos (94,42 ± 21,30). A eficiência reprodutiva da população selvagem de P. expansa pode ser afetada por muitos fatores ambientais, como temperatura, umidade e precipitação. Além disso, fatores influenciados pelo homem, como a presença de produtos químicos na água e a possibilidade de doenças infecciosas, também têm impacto significativo. Os dados dos índices reprodutivos obtidos neste estudo são indispensáveis para futuras investigações de anomalias de incubação.

Partial protection against tissue cysts formation in pigs vaccinated with crude rhoptry proteins of Toxoplasma gondii

A vaccine containing crude Toxoplasma gondii rhoptry proteins incorporated in the immunostimulating complexes (ISCOM) adjuvant was tested in pigs for protecting against tissue cyst formation. For this, 38 mixed breed pigs were divided into four groups, G1 (vaccinated challenged, n = 10) received two doses (100 mu g/dose) of the rhoptry vaccine at days 0 and 21, G2 (vaccinated challenged, n = 10) received viable tachyzoites (7 x 10(7)) of the RH strain at day 0, G3 (unvaccinated challenged, n = 10) and G4 (unvaccinated unchallenged, n = 8). Pigs were challenged with 4 x 10(4) VEG strain oocysts 57 days later. The G1 pigs produced high IgG antibody levels in the indirect enzyme-linked immunosorbent assay (ELISA) after the second dose of rhoptry vaccine, but were not clinically protected against a high dose oocyst challenge. Partial protection was observed in G1 at the chronic phase of infection, when compared with G3. Pigs in group 2 developed high antibody levels and were protected against clinic signs. T gondii was not detected in two (G1) and three (G2) pigs by mouse bioassay. The results indicate partial protection in pigs vaccinated with a rhoptry vaccine. (c) 2005 Elsevier B.V. All rights reserved.

Estudo da mobilidade molecular das blendas aPA/SAN/MMA-MA usando relaxação dielétrica

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Impact of maternal mild hyperglycemia on maternal care and offspring development and behavior of Wistar rats

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Evaluation of neonatally-induced mild diabetes in rats: Maternal and fetal repercussions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of the activation mode of a self-etch resin-based luting cement upon the metabolism of odontoblast-like cells

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Feeding habits of the ichthyofauna in a protected area in the State of São Paulo, southeastern Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Anuros da Reserva Natural Salto Morato, Guaraqueçaba, Paraná, Brasil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of Airborne-Particle Abrasion and Mechanico-Thermal Cycling on the Flexural Strength of Glass Ceramic Fused to Gold or Cobalt-Chromium Alloy

Purpose: To evaluate the effect of airborne-particle abrasion and mechanico-thermal cycling on the flexural strength of a ceramic fused to cobalt-chromium alloy or gold alloy.Materials and Methods: Metallic bars (n = 120) were made (25 mm x 3 mm x 0.5 mm): 60 with gold alloy and 60 with Co-Cr. At the central area of the bars (8 mm x 3 mm), a layer of opaque ceramic and then two layers of glass ceramic (Vita VM13, Vita Zahnfabrick) were fired onto it (thickness: 1 mm). Ten specimens from each alloy group were randomly allocated to a surface treatment [(tungsten bur or air-particle abrasion (APA) with Al(2)O(3) at 10 mm or 20 mm away)] and mechanico-thermal cycling (no cycling or mechanically loaded 20,000 cycles; 10 N distilled water at 37 degrees C and then thermocycled 3000 cycles; 5 degrees C to 55 degrees C, dwell time 30 seconds) combination. Those specimens that did not undergo mechanico-thermal cyclingwere stored inwater (37 degrees C) for 24 hours. Bond strength was measured using a three-point bend test, according to ISO 9693. After the flexural strength test, failure types were noted. The data were analyzed using three factor-ANOVA and Tukey's test (alpha = 0.05).Results: There were no significant differences between the flexural bond strength of gold and Co-Cr groups (42.64 +/- 8.25 and 43.39 +/- 10.89 MPa, respectively). APA 10 and 20 mm away surface treatment (45.86 +/- 9.31 and 46.38 +/- 8.89 MPa, respectively) had similar mean flexural strength values, and both had significantly higher bond strength than tungsten bur treatment (36.81 +/- 7.60 MPa). Mechanico-thermal cycling decreased the mean flexural strength values significantly for all six alloy-surface treatment combinations tested when compared to the control groups. The failure type was adhesive in the metal/ceramic interface for specimens surface treated only with the tungsten bur, and mixed for specimens surface treated with APA 10 and 20 mm.Conclusions: Considering the levels adopted in this study, the alloy did not affect the bond strength; APA with Al(2)O(3) at 10 and 20 mm improved the flexural bond strength between ceramics and alloys used, and the mechanico-thermal cycling of metal-ceramic specimens resulted in a decrease of bond strength.

Group size and composition of Guiana dolphins (Sotalia guianensis) (Van Bénèden, 1864) in the Paranaguá Estuarine Complex, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Guiana dolphins, Sotalia guianensis (Cetacea: Delphinidae), in the Paranaguá Estuarine Complex: insights on the use of area based on the photo-identification technique

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of activation on the multipoint immobilization of penicillin G acylase on macroporous silica

Penicillin G acylase is the second most important enzyme used by industry in an immobilized form. Penicillin hydrolysis is its main application. This reaction is used to produce 6-aminopenicillanic acid (6-APA), an intermediate in the synthesis of semisynthetic antibiotics. This work aims to compare catalytic properties of different penicillin G acylase (PGA) derivatives obtained by multipoint immobilization of the enzyme on macroporous silica. Enzyme amino groups react with different aldehyde groups produced in the support using either glutaraldehyde or glyoxyl activation. In the former method, silica reacts with g-aminopropyltriethoxysilane (g-APTS) and glutaraldehyde; in the latter, a reaction with glycidoxypropyltrimethoxysilane (GPTMS) is followed by acid hydrolysis and oxidation using sodium periodate. This work determines the influence of degree of activation, using glutaraldehyde, on immobilization parameters. PGA was immobilized on these two different supports. Maximum enzyme load, immobilized enzyme activity (derivative activity), rate of immobilization and thermal stability were checked for both cases. For glutaraldehyde activation, the results showed that 0.5% of the g-APTS is sufficient for all the hydroxyl groups in the silica to react. They also showed that degree of activation only affects immobilization yield and reaction velocity and that reduction of the glutaraldehyde derivatives with sodium borohydride does not affect their thermal stability. In comparing the derivatives obtained using glyoxyl and glutaraldehyde activation, it was observed that the glyoxyl derivatives presented better immobilization parameters, with a maximum enzyme load of 264 IU/g silica and a half-life of 20 minutes at 60 °C.

The influence of internal surface treatments on tensile bond strength for two ceramic systems

Statement of the Problem: the ceramic composition and surface microstructure of all-ceramic restorations are important components of an effective bonding substrate. Hydrofluoric acid and sandblasting are well-known procedures for surface treatment; however, surface treatment for high alumina-containing and lithium disilicate ceramics have not been fully investigated.Purpose: This in vitro study evaluated the tensile bond strength of resin cement to two types of ceramic systems with different surface treatments.Methods and Materials: Thirty specimens of each ceramic system were made according to the manufacturer's instructions and embedded in polyester resin. Specimens of In-Ceram Alumina [1] and IPS Empress 2 [E] were distributed to three groups with differing surface treatments (n=10): sandblasting with 50 jam aluminum oxide (APA); sandblasting with 110 pm aluminum oxide modified with silica particles (ROCATEC System-RS); a combination of sandblasting with APA and 10% hydrofluoric acid etching (HA) for two minutes on In-Ceram and for 20 seconds for IPS Empress 2. After the respective surface treatments, all the specimens were silanated, and Rely-X resin cement was injected onto the ceramic surface and light polymerized. The specimens were stored in distilled water at 37 degrees C for 24 hours and thermally cycled 1,100 times (5 degrees C/55 degrees C). The tensile bond strength test was performed in a universal testing machine at a 0.5 mm/minute crosshead speed.Results: the mean bond strength values (AWa) for IPS Empress 2 were 12.01 +/- 5.93 (EAPA), 10.34 +/- 1.77 (ERS) and 14.49 +/- 3.04 (EHA). The mean bond strength values for In-Ceram Alumina were 9.87 +/- 2.40 JAPA) and 20.40 +/- 6.27 (IRS). All In-Ceram specimens treated with 10% hydrofluoric acid failed during thermal cycling.Conclusion: the Rocatec system was the most effective surface treatment for In-Ceram Alumina ceramics; whereas, the combination of aluminum oxide sandblasting and hydrofluoric acid etching for 20 seconds worked more effectively for Empress 2 ceramics.