CaCO3, organic carbon, and nitrogen at DSDP Hole 93-603B

Contents of organic carbon and carbonate carbon were determined on the same set of Cretaceous samples from DSDP Hole 603B in three different laboratories in order to assess the degree of comparability of organic carbon and carbonate values obtained by different labs using the same or different methods. We report the results of analyses for organic carbon using two different CHN analyzers, LECO, and Rock-Eval II and for carbonate carbon by CHN (total C minus C after acidification), the carbonate bomb technique, and CaCO3 calculated on the basis of total calcium obtained from X-ray fluorescence and induction-coupled plasma techniques. In addition, total nitrogen was obtained by two different labs using a CHN analyzer, but different bases for calculation were used. The various techniques for organic carbon analysis yielded comparable results, with the exception of those obtained by one of the CHN analyses of acid-treated samples. The calculation of organic carbon values and comparison on a whole-rock basis is very sensitive to errors in determination of carbonate contents, and this factor explains most, but not all, of the disparities between the data sets. The carbonate bomb technique gives CaCO3 values that correspond well with those calculated from total calcium concentrations (XRF and ICP analyses), whereas the CaCO3 calculated from CHN total carbon minus acid-soluble carbon consistently overestimated CaCO3. Total nitrogen and C/N results from the two different CHN analyses are not comparable and are subject to more error than the factor related to error in estimation of CaCO3.

(Table 2) Oxygen and carbon isotope composition of planktonic foraminiferal species from DSDP Holes 93-603B and 93-604, and one benthic species from Hole 93-604

Holes 603C and 604 of DSDP Leg 93 were drilled on the western Atlantic continental rise at water depths of 4633 m and 2364 m, respectively. In Hole 603C, a nearly continuous, undisturbed, and complete section of Pliocene and lower Pleistocene sediments was recovered by hydraulic piston coring; in Hole 604, a section of uppermost Miocene to Pleistocene sediments was incompletely recovered by rotary coring. In order to reconstruct the Pliocene and Pleistocene history of isotopic variations, 139 oxygen and carbon isotope values were determined for planktonic and monospecific benthic foraminifer samples from these holes. Large parts of the Pleistocene history could not, however, be documented because sample intervals were large and sediments at Site 604 were redeposited. Time correlation is based on magnetostratigraphic (Hole 603C) and micropaleontologic (Hole 603C, Site 604) interpretation. Stable isotope analyses were carried out on the planktonic foraminiferal species Globigerinoides ruber, G. obliquus, and Globorotalia inflata from Hole 603C (48 analyses) and from Site 604 (48 analyses); at Site 604, the benthic foraminifer Uvigerina peregrina (43 analyses) was also studied through the section. Age calibration for Hole 603C is based on the magnetostratigraphy of Canninga et al. (1987; doi:10.2973/dsdp.proc.93.130.1987), which uses the time scale of Lowrie and Alvarez (1981).

(Table 1) Clay minerals at DSDP Hole 93-603B

Cretaceous sediments encountered in Hole 603B contain a 17 Å smectite as the principal clay mineral, with lesser amounts of illite, kaolinite, and randomly interstratified illite/smectite (I/S). No evidence of smectite to I/S transformation with depth is seen in the interval between 1040 and 1570 m below the sediment surface. Although the presence of some volcanic ash suggests a volcanic origin for the smectite, the nature of associated organic matter together with prevailing sedimentological models for Cretaceous sedimentation on the lower continental rise argue more strongly for a dominantly terrestrial origin for the clays.

(Table 1) Distribution of Lower Cretaceous calcareous nannofossils at DSDP Hole 93-603B

Upper Berriasian to lower Aptian calcareous nannofossil assemblages have been studied from a siliciclastic deep-sea fan complex and a subjacent limestone sequence drilled beneath the lower continental rise in the western North American Basin, 270 miles (435 km) off Cape Hatteras, North Carolina (USA). Sharp lithologic facies changes and reworking by turbidites complicate the biostratigraphic interpretation, but provide an excellent opportunity to better distinguish "nearshore" from open-ocean nannofossil species, and to investigate the introduction of neritic taxa into the deep-see environment, a phenomenon that appears to have been widespread within the circum-North Atlantic during Neocomian times. Well-preserved assemblages in dark, carbonaceous claystones were probably displaced from the oxygen minimum zone along the upper slope or outer shelf. Neritic, continental margin species prevalent in this facies include the holococcolith Zebrashapka vanhintei n. gen., n. sp., Lithraphidites alatus magnus n. spp., Pickelhaube furtiva n. gen., and a host of nannoconids and micrantholiths. A qualitative evaluation of widely used guide fossils suggests that the triad of proposed markers for the base of Roth's Zone NC3 make their first appearances in the following (ascending) order: Diadorhombus rectus, TUbodiscus verenae, Calcicalathina oblongata. Of these, we chose the nominative species for the zone, T. verenae, to mark its base and to approximate the Berriasian/Valangian boundary. Cyclagelosphaera deflandrei is strongly affected by diagenesis and is therefore not a reliable index species for the base of Zone NC4 near the Valanginian/Hauterivian boundary (the last occurrence of T. verenae is also not suitable there). In addition, Lithraphidites bollii, a form apparently confined to the low latitudes of the Tethyan region, was absent at the more temperate Site 603 and not available as a subzonal marker for the upper Hautervian-lower Barremian (mid-NC4 and mid-NC5, respectively). Cruciellipsis cuvillieri, however, provides a reliable datum just below the Hauterivian/Barremian boundary (base of NC5), despite the potential for reworking in this section. Nannoconids tend to be reworked in this section, and do not provide trustworthy forms to mark the Barremian/Aptian boundary (base of NC6). Hayesites irregularis n. comb, probably does provide a useful first appearance datum within the lower Aptian, if it is not confused with a more birefringent and globular form, Rucinolithus terebrodentarius n. sp. Rhagodiscus angustus is mimicked by a similar form (Zeughrabdotusl pseudoangustus n. sp.), which apparently ranges down to the Hauterivian, thus Lithastrinus floralis provides a more useful first appearance datum for the base of the middle-upper Aptian Rhagodiscus angustus Zone (NC7). Aside from the new taxa mentioned above, the following are also described: Cretarhabdusl delicatus n. sp. and Cyclagelosphaera jiangii n. sp.

Total organic carbon content and redox-sensitiv trace metal concentrations of selected late Cenoman claystones from DSDP Hole 93-603B

The Cenomanian/Turonian (C/T) intervals at DSDP Sites 105 and 603B from the northern part of the proto-North Atlantic show high amplitude, short-term cyclic variations in total organic carbon (TOC) content. The more pronounced changes in TOC are also reflected by changes in lithology from green claystones (TOC<1%) to black claystones (TOC>1%). Although their depositional history was different, the individual TOC cycles at Sites 105 and 603B can be correlated using stable carbon isotope stratigraphy. Sedimentation rates obtained from the isotope stratigraphy and spectral analyses indicate that these cycles were predominately precession controlled. The coinciding variations in HI, OI, delta13Corg and the abundance of marine relative to terrestrial biomarkers, as well as the low abundance of lignin pyrolysis products generated from the kerogen of the black claystones, indicate that these cyclic variations reflect changes in the contribution of marine organic matter (OM). The cooccurrence of lamination, enrichment of redox-sensitive trace metals and presence of molecular fossils of pigments from green sulfur bacteria indicate that the northern proto-North Atlantic Ocean water column was periodically euxinic from the bottom to at least the base of the photic zone (<150 m) during the deposition of the black claystones. In contrast, the green claystones are bioturbated, are enriched in Mn, do not show enrichments in redox-sensitive trace metals and show biomarker distributions indicative of long oxygen exposure times, indicating more oxic water conditions. At the same time, there is evidence (e.g., abundance of biogenic silica and significant 13C-enrichment for OC of phytoplanktic origin) for enhanced primary productivity during the deposition of the black claystones. We propose that increased primary productivity periodically overwhelmed the oxic OM remineralisation potential of the bottom waters resulting in the deposition of OM-rich black claystones. Because the amount of oxygen used for OM remineralisation exceeded the amount supplied by diffusion and deep-water circulation, the northern proto-North Atlantic became euxinic during these periods. Both Sites 105 and 603B show trends of continually increasing TOC contents and HI values of the black claystones up section, which most likely resulted from both enhanced preservation due to increased anoxia and increased production of marine OM during oceanic anoxic event 2 (OAE2).

(Table 1) Organic carbon, hydrogen and oxygen index and hydrocarbons at DSDP Hole 93-603B

C2-C8 hydrocarbon concentrations (about 35 compounds identified, including saturated, aromatic, and olefinic compounds) from 27 shipboard-sealed, deep-frozen core samples of DSDP Hole 603B off the east coast of North America were determined by a gas-stripping/thermovaporization method. Total yields representing the hydrocarbons dissolved in the pore water and adsorbed on the mineral surfaces of the sediments vary from 22 to 2400 ng/g of dryweight sediment. Highest yields are measured in the two black shale samples of Core 603B-34 (hydrogen index of 360 and 320 mg/g Corg, respectively). In organic-carbon-normalized units these samples have hydrocarbon contents of 12,700 and 21,500 ng/g Corg, respectively, indicating the immaturity of their kerogens. Unusually high organic-carbonnormalized yields are associated with samples that are extremely lean in organic carbon. It is most likely that they are enriched by small amounts of migrated light hydrocarbons. This applies even to those samples with high organic-carbon contents (1.3-2.2%) of Sections 603B-28-4, 603B-29-1, 603B-49-2, and 603B-49-3, because they have an extremely low hydrocarbon potential (hydrogen index between 40 and 60 mg/g Corg). Nearly all samples were found to be contaminated by varying amounts of acetone that is used routinely in large quantities on board ship during core-cutting procedures. Therefore, 48 samples from the original set of 75 collected had to be excluded from the present study.

(Table 2) Terrigenous, authigenic and biogenic composition of sediments at DSDP Hole 93-603B

Pelagic sedimentation during the Early Cretaceous at Site 603 produced alternations of laminated marly limestone and bioturbated limestone-a facies typical of the "Blake-Bahama Formation" of the western Atlantic. This limestone is a nannofossil micrite, rich in calcified radiolarians, with variable amounts of organic matter, pyritized radiolarian tests, fish debris, and micaceous silt. The laminated marly limestone layers are enriched in organic matter when compared with the intervals of bioturbated limestone. The organic carbon is predominantly terrestrial plant debris; where the organic-carbon content is in excess of 1%, there is also a significant marine-derived component. Laminations can result either from bands of alternately enriched and depleted opaque material and clay, or from bands of elongate lenses (microflasers) of micrite, which could be plastically deformed pellets or diagenetic features. The alternating intervals of laminated and bioturbated structures may have resulted from combined changes in surface productivity, in the influx of terrigenous organic matter, and in the intensity of bottom circulation, which led to episodic oxygen depletion in the bottom water and sediments. Variations in the relative proportions of laminated clay-rich and bioturbated lime-rich limestone and in the development of cycles between these structures make it possible to subdivide the Lower Cretaceous pelagic facies into several subunits which appear to be regional in extent. Bioturbated limestone is dominant in the Berriasian, laminated marly limestone in the Valanginian and Barremian-lower Aptian, and well-developed alternations between these end members in the Hauterivian. The Hauterivian to lower Aptian sediments contain abundant terrigenous clastic turbidites associated with a submarine fan complex. These changes in the general characteristics of the pelagic sediment component of the Blake-Bahama Formation at Site 603 are synchronous with those in the Blake-Bahama Basin (Sites 534 and 391) to the south. Carbonate sedimentation ended in the early Aptian, probably because of a regional shoaling of the carbonate compensation depth.

(Table 1) Pollen assemblage at DSDP Holes 96-603B and 93-605

The analysis of 104 core-catcher samples from Site 603 resulted in a continuous palynological record from the middle Miocene to early Pleistocene. Two palynological zones could be established (Zone 2, below 380 m: high Pinus, Quercus, and Carya values; Zone 1, above 380 m: high Pinus, and Sphagnum values). The marine pollen record was found to reflect the history of the vegetation of the eastern United States, the flora from Zone 2 indicating a warmer climate than that from Zone 1, which depicts a climatic cooling trend. The onset of Western Boundary Undercurrent deposition had no noticeable effect on the pollen distribution in the marine sediments.

Texture, geochemistry, isotope composition, petrography and epoch at DSDP Site 93-603

Abundant Fe-Mn carbonate concretions (mainly siderite, manganosiderite, and rhodochrosite) were found in the hemipelagic claystones of Site 603 on the eastern North American continental rise. They occur as nodules, micronodules, or carbonate-replaced burrow fills and layers at a subbottom depth of between ~ 120 (Pliocene) and 1160 m (Albian-Cenomanian). In general, the Fe-Mn carbonate concretions form from CO3- produced by the microbiological degradation of organic matter in the presence of abundant Fe + or Mn + and very low S- concentrations. However, there is also some evidence for diagenetic replacement of preexisting calcite by siderite. The carbon isotope composition of diagenetic Fe-Mn carbonate nodules is determined by CO2 reduction during methanogenesis. Carbonate nodules in Cretaceous sediments at sub-bottom depths of 1085 and 1160 m have distinctly lower d13C values (- 12.2 and - 12.9 per mil) than Neogene siderites, associated with abundant biogenic methane in the pore space (-8.9 to 1.7 per mil between 330 and 780 m depth). Since no isotopic zonation could be detected within individual nodules, we assume that the isotopic composition reflects more or less geochemical conditions at the present burial depth of the carbonate nodules. Carbonates did not precipitate within the zone of sulfate reduction (approximately 0.01 to 10 m), where all of the pyrite was formed. The oxygen isotope composition indicates precipitation from seawater-derived interstitial waters. The d18O values decrease with increasing burial depth from + 5.1 to - 1.2 per mil, suggesting successively higher temperatures during carbonate formation.