973 resultados para 66-493
Resumo:
The crystalline-phase transition in polyamide-66/montmorillonite nanocomposites before melting was investigated by in situ X-ray diffraction and is reported for the first time in this work. The phase-transition temperature in the nanocomposites was 170 degreesC, 20 degreesC lower than that in polyamide-66. The lower phase-transition temperature of the nanocomposites could be attributed to the gamma-phase-favorable environment caused by silicate layers. Meanwhile, the addition of silicate layers changed the crystal structure of the polyamide-66 matrix and influenced the phase-transition behavior.
Resumo:
The analysis of the small angle X-ray scattering (SAXS) data was based upon particle characteristic function, one-dimensional electron-density correlation function and particle distribution function. The microstructure of nylon 66 with different degrees of crystallinity was studied by means of X-ray scattering method. The radius of gyration R-g, the Porod radius R-p, the thickness of crystalline region L-c the thickness of non-crystalline region L-n, the thickness of interphase region d(tr), the long period L, the semiaxises of particles (a, a, b), the distribution of the particle sizes and the scattering invariant were calculated. The results indicate that there was a significant interphase region between the crystalline region and the non-crystalline region. and its content (W-t,W-x) should not be neglected in comparison with that of crystalline region W-c,W-x. The morphology of nylon 66 prepared by isothermal crystallization at a high temperature was mainly a lamellar structure, while the spherical crystals dominated in the quenched sample. The size of the particles in the quenched sample was smaller than that of those in the isothermally crystallized sample. and the distribution of the particle sizes in the isothermally crystallized sample was wider.
Resumo:
Analysis of isothermal and nonisothermal crystallization kinetics of nylon 66 was carried out using differential scanning calorimetry (DSC). The commonly used Avrami equation and that modified by Jeziorny were used, respectively, to fit the primary stage of isothermal and nonisothermal crystallizations of nylon 66. In the isothermal crystallization process, mechanisms of spherulitic nucleation and growth were discussed. The lateral and folding surface free energies determined from the Lauritzen-Hoffman treatment are sigma = 9.77 erg/cm(2) and sigma (e) = 155.48 erg/cm(2), respectively; and the work of chain folding is q = 33.14 kJ/mol. The nonisothermal crystallization kinetics of nylon 66 was analyzed by using the Mo method combined with the Avrami and Ozawa equations. The average Avrami exponent (n) over bar was determined to be 3.45. The activation energies (DeltaE) were determined to be -485.45 kJ/mol and -331.27 kJ/mol, respectively, for the isothermal and nonisothermal crystallization processes by the Arrhenius and the Kissinger methods.
Resumo:
用红外光谱法研究了Pa1010/66共聚物氢键含量、N-H键伸缩振动力常数分布与组成的关系,发现66盐重量含量为40%时氢键含量最低,N-H伸缩振动力常数分布最宽,解释了PA1010/66共聚物热力学、结晶、机械等性能随组成改变而变化的原因.
Resumo:
尼龙1010/6 和尼龙1010/66 的基本物理性能随着组成的改变而改变,尼龙1010 含量高时,共聚物密度大于计算值;含量低时,共聚物密度小于计算值.尼龙1010 含量20%左右时,共聚物具有较大吸水率
Resumo:
Isothermal crystallization and melting behavior of nylon 66 and its blends with poly(ether imide) (PEI) were investigated by differential scanning calorimetry. Crystallization kinetics such as overall rate constant Z and index n were calculated according to Avrami approach. Crystallization in the blend was retarded with respect to that of pure nylon 66 by incorporation of PEI with high glass transition temperature (T-g). The lowest growth rate of the spherulites was observed in the blends containing 10 and 15 wt% fraction of PEI. A transition temperature where positively birefringent spherulites disappear and negative birefringent spherulites develop was measured by thermal analysis. The transition temperature increased with content of PEI in the blends. A suitable range of isothermally crystallization temperatures, 238.5-246 degrees C, is suggested For determining the equilibrium melting points by means of Hoffman-Weeks approach.
Resumo:
The reinforcement effect of an acicular inorganic filler, tremolite, on nylon 66 was studied. The mechanical properties of tremolite-filled nylon 66 composites and the effect of the filler particle size on them were obtained. The dynamic mechanical properties and rheological properties of the composites were measured. Two treatments, silane and unsaturated polyester, were used to improve the interface between tremolite and the nylon matrix. The morphologies of the composites were investigated using SEM. (C) 1998 John Wiley & Sons, Inc.
Resumo:
研究了PA1010/66共聚物在液氮温度与Tm之间的松弛行为与组成的关系发现不同的松弛温度及损耗因子随共聚物组成的改变而变化的趋势不同随66含量增加,Tγ总趋势下降,Tβ总趋势增加,Tα先下降后增加;tanδ(γ)·tan-1δ(α)和tanδtan-1δ(α)先下降后增加,tanδ(α)先增大后减小。66占50%时,Tγ、Tβ极大,Tα最小;tanδ(γ)tanδ(β)、tanδ(β)·tan-1δ(α)最小,tanδ(α)最大.
Resumo:
本文讨论了进口与国产PA—66经钴源辐射交联后,对机械物理性能产生的影响。发现适量经辐射的PA—66球压硬度、拉伸强度、Izod冲击强度都有较大幅度提高,并在100,000Gy剂量对达最大值,而断裂伸长率在100,000Gy剂量以下变化不大。国产PA—66辐射后在乙二醇中,在250℃时,2小时不起层,性能变化不大,可替代进口材料。
Resumo:
The morphology and dynamic mechanical properties of blends of poly(ether imide) (PEI) and nylon 66 over the full composition range have been investigated. Torque changes during mixing were also measured. Lower torque values than those calculated by the log-additivity rule were obtained, resulting from the slip at the interface due to low interaction between the components. The particle size of the dispersed phase and morphology of the blends were examined by scanning electron microscopy. The composition of each phase was calculated. The blends of PEI and nylon 66 showed phase-separated structures with small spherical domains of 0.3 similar to 0.7 mu m. The glass transition temperatures (T(g)s) of the blends were shifted inward, compared with those of the homopolymers, which implied that the blends were partially miscible over a range of compositions. T-g1, corresponding to PEI-rich phase, was less affected by composition than T-g2, corresponding to nylon 66-rich phase. This indicated that the fraction of PEI mixed into nylon 66-rich phase increased with decreasing PEI content and that nylon 66 was rarely mixed into the PEI-rich phase. The effect of composition on the secondary relaxations was examined. Both T-beta, corresponding to the motion of amide groups in nylon 66, and T-gamma, corresponding to that of ether groups in PEI, were shifted to higher temperature, probably because of the formation of intermolecular interactions between the components.
Resumo:
硅灰石填充尼龙66的力学性能王雪芹,李滨耀(中国科学院长春应用化学研究所长春130022)关键词硅灰石,尼龙66,填充改性,力学性能硅灰石是一种工业矿物,具有完整的短纤维针状结构,在塑料的填充改性中,能够与石棉、滑石、云母等相媲美,在欧美占无机填料市...
Resumo:
La realidad del voluntariado es sumamente compleja hasta el punto de que resulta complicado definir y caracterizar el trabajo voluntario, dada la gran variedad de interpretaciones, motivaciones, variables sociodemográficas y aspectos culturales que configuran el perfil de los voluntarios. El objetivo de este trabajo es analizar la influencia conjunta de algunas variables sociodemográficas, así como de los valores culturales de índole secular o tradicional, sobre el perfil de los voluntarios en Europa. Además, se investiga qué variables orientan a los voluntarios hacia un determinado tipo de voluntariado u otro. Para ello se ha aplicado principalmente una metodología de regresión logística a partir de la información disponible en la European Value Study. Los resultados obtenidos ayudan a establecer una caracterización del voluntariado en Europa, y confirman la influencia de los valores culturales, en primer lugar, en la realización o no de trabajos de voluntariado, y en segundo lugar, en la elección que hacen estas personas del tipo de actividad con la que están comprometidos. Al analizar dos tipos de voluntariado de motivación supuestamente muy diferente, se concluye que existe un grupo de valores que influyen en ambos, aunque el sentido y la intensidad en la que lo hacen sea diferente; por otra parte, algunos valores tienen influencia o no en la realización de trabajos de voluntariado, dependiendo del tipo específico al que nos refiramos.
Resumo:
Background: Pulmonary exacerbations (PEx) are responsible for much of the morbidity and mortality associated with cystic fibrosis (CF). However, there is a paucity of data on outcomes in CF PEx and factors influencing outcomes.
Methods: We reviewed all PEx in patients infected with Pseudomonas aeruginosa treated with parenteral antibiotics over 4 years at our center. Treatment failures were categorized a priori as those PEx requiring antibiotic regimen change, prolongation of therapy > 20 days because of failure to respond, an early recurrent event within < 45 days, or failure to recover lung function to > 90% of baseline FEV1.
Results: A total of 101 patients were followed for 452 PEx. Treatment failures were observed in 125 (28%) of PEx; antibiotic regimen change was observed in 27 (6%), prolongation of therapy in 29 (6%), early recurrent events in 63 (14%), and failure to recover lung function to > 90% of baseline FEV1 in 66 (15%). Demographic factors associated with one or more treatment failures per year included advanced airways disease, use of enteric feeds, CF-related diabetes, and CF liver disease but did not include female sex or F508del homozygosity. Increased treatment failure risk was associated with lower admission FEV1 and increased markers of inflammation. At therapeutic completion, increased inflammatory markers correlated with treatment failure. Failure rates decreased with increasing number of active antimicrobial agents used based on in vitro susceptibility (zero, 28/65 [43%]; one, 38/140 [27%]; two, 59/245 [24%]; three, 0/2 [0%]; P = .02).
Conclusions: One-fourth of PEx fail to respond adequately to initial management. Patient demographic and episode-specific clinical information can be used to identify individuals at increased risk of initial management failure.