Micromorphology of Resin-Dentin Interfaces Using One-Bottle Etch&Rinse and Self-Etching Adhesive Systems on Laser-Treated Dentin Surfaces: A Confocal Laser Scanning Microscope Analysis

Background and Objectives: This study evaluated the hybrid layer (HL) morphology created by three adhesive systems (AS) on dentin surfaces treated with Er:YAG laser using two irradiation parameters. Study Design: Occlusal flat dentin surfaces of 36 human third molars were assigned into nine groups (n = 4) according to the following ASs: one bottle etch&rinse Single Bond Plus (3M ESPE), two-step Clearfil Protect Bond (Kuraray), and all-in-one S3 Bond (Kuraray) self-etching, which were labeled with rhodamine B or fluorescein isothiocyanate dextran and were applied to dentin surfaces that were irradiated with Er:YAG laser at either 120 (38.7 J/cm(2)) or 200 mJ/pulse (64.5 J/cm(2)), or were applied to untreated dentin surfaces (control group). The ASs were light-activated following MI and the bonded surfaces were restored with resin composite Z250 (3M ESPE). After 24 hours of storage in vegetable oil, the restored teeth were vertically, serially sectioned into 1-mm thick slabs, which had the adhesive interfaces analyzed with confocal laser microscope (CLSM-LSM 510 Meta). CLSM images were recorded in the fluorescent mode from three different regions along each bonded interface. Results: Non-uniform HL was created on laser-irradiated dentin surfaces regardless of laser irradiation protocol for all AS, while regular and uniform HL was observed in the control groups. ""Stretch mark""-like red lines were found within the HL as a result of resin infiltration into dentin microfissures, which were predominantly observed in 200 mJ/pulse groups regardless of AS. Poor resin infiltration into peritubular dentin was observed in most regions of adhesive interfaces created by all ASs on laser-irradiated dentin, resulting in thin resin tags with neither funnel-shaped morphology nor lateral resin projections. Conclusion: Laser irradiation of dentin surfaces at 120 or 200 mJ/pulse resulted in morphological changes in HL and resin tags for all ASs evaluated in the study. Lasers Surg. Med. 42:662-670, 2010. (C) 2010 Wiley-Liss, Inc.

Surgical planning for resection of an ameloblastoma and reconstruction of the mandible using a selective laser sintering 3D biomodel

Ameloblastoma is a benign locally aggressive infiltrative odontogenic lesion. It is characterized by slow growth and painless swelling. The treatment for ameloblastoma varies from curettage to en bloc resection, and the reported recurrence rates after treatment are high; the safety margin of resection is important to avoid recurrence. Advances in technology brought about great benefits in dentistry; a new generation of computed tomography scanners and 3-dimensional images enhance the surgical planning and management of maxillofacial tumors. The development of new prototyping systems provides accurate 3D biomodels on which surgery can be simulated, especially in cases of ameloblastoma, in which the safety margin is important for treatment success. A case of mandibular follicular ameloblastoma is reported where a 3D biomodel was used before and during surgery.

Quantitative 3D profilometry and SEM analysis of the adaptation of root-end filling materials placed under an optical microscope

P>Aim To evaluate by 3D profilometry and scanning electron microscopy (SEM), the marginal adaptation of mineral trioxide aggregate (MTA) and Sealer 26 placed in root-end cavities with direct vision or under an optical microscope. Methodology The root ends of 52 root filled canine teeth were filled with MTA or Sealer 26 under direct vision or optical microscope (n = 13). In each group, eight specimens were analysed by profilometry for measurement of the area and depth of gaps. In the other five specimens, gap area was measured using SEM to verify marginal adaptation and surface characteristic. Data were analysed by parametric (anova and Tukey) and non-parametric (Kruskal-Wallis and Dunn) tests. Results The assessment of the adaptation of both materials to dentine was not influenced by the mode of visualization, which was confirmed by both profilometry and SEM observations. The voids measured with profilometry for Sealer 26 under direct vision were significantly wider and deeper than those for MTA under direct vision (P < 0.05). In SEM, significantly larger gap areas were observed with Sealer 26 (P < 0.05). Conclusion Root-end cavities filled with MTA had smaller gaps and better marginal adaptation than Sealer 26.

Coupling 3D visualisation to qualitative assessment of built environment designs

Geographical information systems (GIS) coupled to 3D visualisation technology is an emerging tool for urban planning and landscape design applications. The utility of 3D GIS for realistically visualising the built environment and proposed development scenarios is much advocated in the literature. Planners assess the merits of proposed changes using visual impact assessment (VIA). We have used Arcview GIS and visualisation software: called PolyTRIM from the University of Toronto, Centre for Landscape Research (CLR) to create a 3D scene for the entrance to a University campus. The paper investigates the thesis that to facilitate VIA in planning and design requires not only visualisation, but also a structured evaluation technique (Delphi) to arbitrate the decision-making process. (C) 2001 Elsevier Science B.V. All rights reserved.

Measuring range of active cervical rotation in a position of full head flexion using the 3D Fastrak measurement system: an intra-tester reliability study

Most external assessments of cervical range of motion assess the upper and lower cervical regions simultaneously. This study investigated the within and between days reliability of the clinical method used to bias this movement to the upper cervical region, namely measuring rotation of the head and neck in a position of full cervical flexion. Measurements were made using the Fastrak measurement system and were conducted by one operator. Results indicated high levels of within and between days repeatability (range of ICC2,1 values: 0.85-0.95). The ranges of axial rotation to right and left, measured with the neck positioned in full flexion, were approximately 56% and 50%, respectively of total cervical rotation, which relates well to the proportional division of rotation in the upper and lower cervical regions. These results suggest that this method of measuring rotation would be appropriate for use in subject studies where movement dysfunction is present in the upper cervical region, such as those with cervicogenic headache. (C) 2003 Elsevier Science Ltd. All rights reserved.

Numerical study of hydrogenic effective mass theory for an impurity P donor in Si in the presence of an electric field and interfaces

In this paper we examine the effects of varying several experimental parameters in the Kane quantum computer architecture: A-gate voltage, the qubit depth below the silicon oxide barrier, and the back gate depth to explore how these variables affect the electron density of the donor electron. In particular, we calculate the resonance frequency of the donor nuclei as a function of these parameters. To do this we calculated the donor electron wave function variationally using an effective-mass Hamiltonian approach, using a basis of deformed hydrogenic orbitals. This approach was then extended to include the electric-field Hamiltonian and the silicon host geometry. We found that the phosphorous donor electron wave function was very sensitive to all the experimental variables studied in our work, and thus to optimize the operation of these devices it is necessary to control all parameters varied in this paper.

A review of drainage and spontaneous rupture in free standing thin films with tangentially immobile interfaces

A review of spontaneous rupture in thin films with tangentially immobile interfaces is presented that emphasizes the theoretical developments of film drainage and corrugation growth through the linearization of lubrication theory in a cylindrical geometry. Spontaneous rupture occurs when corrugations from adjacent interfaces become unstable and grow to a critical thickness. A corrugated interface is composed of a number of waveforms and each waveform becomes unstable at a unique transition thickness. The onset of instability occurs at the maximum transition thickness, and it is shown that only upper and lower bounds of this thickness can be predicted from linear stability analysis. The upper bound is equivalent to the Freakel criterion and is obtained from the zeroth order approximation of the H-3 term in the evolution equation. This criterion is determined solely by the film radius, interfacial tension and Hamaker constant. The lower bound is obtained from the first order approximation of the H-3 term in the evolution equation and is dependent on the film thinning velocity A semi-empirical equation, referred to as the MTR equation, is obtained by combining the drainage theory of Manev et al. [J. Dispersion Sci. Technol., 18 (1997) 769] and the experimental measurements of Radoev et al. [J. Colloid Interface Sci. 95 (1983) 254] and is shown to provide accurate predictions of film thinning velocity near the critical thickness of rupture. The MTR equation permits the prediction of the lower bound of the maximum transition thickness based entirely on film radius, Plateau border radius, interfacial tension, temperature and Hamaker constant. The MTR equation extrapolates to Reynolds equation under conditions when the Plateau border pressure is small, which provides a lower bound for the maximum transition thickness that is equivalent to the criterion of Gumerman and Homsy [Chem. Eng. Commun. 2 (1975) 27]. The relative accuracy of either bound is thought to be dependent on the amplitude of the hydrodynamic corrugations, and a semiempirical correlation is also obtained that permits the amplitude to be calculated as a function of the upper and lower bound of the maximum transition thickness. The relationship between the evolving theoretical developments is demonstrated by three film thickness master curves, which reduce to simple analytical expressions under limiting conditions when the drainage pressure drop is controlled by either the Plateau border capillary pressure or the van der Waals disjoining pressure. The master curves simplify solution of the various theoretical predictions enormously over the entire range of the linear approximation. Finally, it is shown that when the Frenkel criterion is used to assess film stability, recent studies reach conclusions that are contrary to the relevance of spontaneous rupture as a cell-opening mechanism in foams. (C) 2003 Elsevier Science B.V. All rights reserved.

Interfaces : educação especial & seguridade social

Com a Constituição da República Federativa do Brasil (1988), a intersetorialidade imprimiu nas políticas públicas de educação e seguridade social uma construção e uma operacionalidade mais articuladas e interdependentes. Entre as leis e portarias interministeriais, destaca-se o Programa Benefício de Prestação Continuada na Escola, que atende pessoas com deficiência de zero a dezoito anos de idade. Nesta pesquisa, questionam-se as interfaces entre as políticas públicas da educação especial e da seguridade social. São objetivos da pesquisa: analisar as interfaces das políticas públicas sociais – educação especial e seguridade social – no que se refere à garantia de direitos à educação de crianças com deficiência ou Transtornos Globais do Desenvolvimento, entre zero e cinco anos, no município de Vitória, Estado do Espírito Santo; identificar como se configuram as interdependências entre profissionais da educação especial e da seguridade social e os familiares (pais ou responsáveis) dessas crianças perante seus processos educacionais; compreender os diferentes movimentos entre as instituições de educação e da seguridade social e suas implicações para a inclusão escolar das crianças com deficiência ou Transtorno Global do Desenvolvimento; analisar como os profissionais da educação e da seguridade social lançam perspectivas para os processos de inclusão escolar e estabelecem diálogo com a família acerca da educação dessas crianças. Esta é uma pesquisa de natureza qualitativa, estudo de caso com coleta de dados empíricos e bibliográficos, na qual foram sujeitos: mães de três crianças de três Centros Municipais de Educação Infantil de Vitória; professoras da sala de atividades e de educação especial, pedagogas e diretoras; técnicos das Secretarias Municipais de Vitória: Educação, Saúde e Assistência Social e do Instituto Nacional do Seguro Social. As técnicas empregadas para coleta de dados foram a entrevista o grupo focal e o diário de itinerância. Foram procedimentos adotados para o registro dos dados a audiogravação de entrevistas e de grupos focais e anotações em diário de itinerância. Os dados foram organizados em cinco categorias de análise, produzidas por meio das narrativas dos familiares e dos profissionais participantes da pesquisa. Os conceitos de Norbert Elias, interdependência e configuração, relação de poder – estabelecidos e outsiders –, processos sociais e relação entre sociedade e Estado (balança do poder) contribuíram para compreender os dados, por serem observados nas categorias produzidas. Os resultados apontam para a fragilidade de Global do Desenvolvimento, no município de Vitória. Revelam, ainda, uma inconsistência de fluxos de referência e contrarreferência e lacunas na dimensão técnica e operativa para as interfaces das políticas públicas intersetoriais com práticas profissionais que cumpram o papel político conforme outorga a legislação federal e municipal. As considerações se ampliam para discussões entre o instituído e o instituinte – políticas públicas e práticas profissionais – que priorizem a efetivação da intersetorialidade diante das demandas do público investigado com vista à garantia dos direitos de acesso a uma educação de qualidade.

A narratividade do Hip Hop e suas interfaces com o contexto educacional

A presente tese de doutoramento em Educação aborda a cultura do Hip Hop e sua relação com o contexto educativo. Insere-se nas discussões da linha de pesquisa em Educação e Linguagens e problematiza o espaço escolar, enquanto espaço de reprodução da ideologia hegemônica, analisando o projeto “Escola de Rimas”, desenvolvido na Grande Vitória, como movimento de resistência e ressignificação cultural na escola. Parte da pergunta: Como as práticas discursivas do Hip Hop podem ressignificar o contexto escolar? A presente tese aborda a cultura do Hip Hop como campo discursivo singular de uma experiência narrativa (BENJAMIN, 1986; BONDÍA, 2001) e de uma subjetividade eticamente responsável (BAKHTIN, 1992a; 1992b; 2010), fundada no princípio da alteridade (PONZIO, 2009), e o analisa a partir de uma perspectiva crítica e dialógica (FREIRE, 1981; 1994; 1995; GIROUX, 1986; 1987; BRANDÃO, 1986; BAKHTIN, 1992a; 1992b; 2010). Desenvolve a pesquisa em um contexto limiar entre a escola e a cultura hip hop e dimensiona o debate das culturas marginais nos contextos educativos, voltando-se para os sujeitos e suas experiências narrativas, avaliando a interação de algumas de suas práticas discursivas com o processo de ensino-aprendizagem. Para isso, analisa o projeto cultural “Escola de Rimas”, criado pelos próprios ativistas do movimento hip hop da Grande Vitória e desenvolvido em uma escola da rede pública estadual de ensino do Espírito Santo, com o objetivo de discutir o seu papel em um processo de ressignificação educacional. Como hipótese de trabalho defende-se que o espaço escolar, como espaço de disputas, é ressignificado com a introdução de outras práticas discursivas e culturais, entre elas o hip hop, que aponta para a necessidade de ouvir responsiva e responsavelmente as narrativas dos educandos, contribuindo, assim, para a formação crítica desses sujeitos e enfrentando, ao mesmo tempo, práticas de exclusão historicamente instituídas.

Interfaces da comunicação e saúde na mídia impressa

O campo da Comunicação e Saúde engloba tanto os conhecimentos peculiares à Comunicação quanto os conhecimentos da área da Saúde, os quais tratados em conjunto e explorados as potencialidades de cada ciência, se interrelacionam, interagem e convergem para um amplo campo interdisciplinar. O objetivo deste trabalho foi compreender, discutir e problematizar, a partir da opinião dos sujeitos, a dinâmica da divulgação midiática da saúde/doenças na mídia impressa do Espírito Santo (ES) e identificar possíveis temáticas de saúde negligenciadas. Trata-se de um estudo qualitativo no qual foram realizadas entrevistas com os atores-chave envolvidos na discussão/veiculação da saúde/doenças nos dois principais jornais do estado: A Tribuna e A Gazeta, gestores da Secretaria de Estado as Saúde do ES (SESA), bem como integrantes da Assessoria de Comunicação da SESA e conselheiros de saúde representante dos usuários no Conselho Estadual de Saúde. O material empírico coletado foi analisado por meio da Análise de Conteúdo a partir da temática. A compreensão das relações que permeiam a mídia impressa e a divulgação midiática da saúde no Espírito Santo resultou em importantes apontamentos os quais podem auxiliar jornalistas e comunicadores na transmissão de informações pertinentes à Saúde Coletiva de forma clara, ética e política e que corresponda às necessidades de saúde da população. Nas interfaces das relações entre os atores entrevistados e a compreensão da dinâmica das notícias de saúde, foram identificadas Doenças Midiaticamente Negligenciadas e apontadas estratégias para lidar com esse silenciamento midiático. Conclui-se que dentre as interfaces do campo da Comunicação e Saúde se encontra as relações com o campo da Saúde Coletiva e por isso, as sugestões para o enfrentamento da negligência midiática de alguns temas incluem uma capacitação em Saúde Coletiva para repórteres dos jornais; a mobilização dos doentes; a gestão fomentar a pauta pública; e a participação social.

Automatic segmentation and 3D feature extraction of protein aggregates in Caenorhabditis Elegans

In the last years, it has become increasingly clear that neurodegenerative diseases involve protein aggregation, a process often used as disease progression readout and to develop therapeutic strategies. This work presents an image processing tool to automatic segment, classify and quantify these aggregates and the whole 3D body of the nematode Caenorhabditis Elegans. A total of 150 data set images, containing different slices, were captured with a confocal microscope from animals of distinct genetic conditions. Because of the animals’ transparency, most of the slices pixels appeared dark, hampering their body volume direct reconstruction. Therefore, for each data set, all slices were stacked in one single 2D image in order to determine a volume approximation. The gradient of this image was input to an anisotropic diffusion algorithm that uses the Tukey’s biweight as edge-stopping function. The image histogram median of this outcome was used to dynamically determine a thresholding level, which allows the determination of a smoothed exterior contour of the worm and the medial axis of the worm body from thinning its skeleton. Based on this exterior contour diameter and the medial animal axis, random 3D points were then calculated to produce a volume mesh approximation. The protein aggregations were subsequently segmented based on an iso-value and blended with the resulting volume mesh. The results obtained were consistent with qualitative observations in literature, allowing non-biased, reliable and high throughput protein aggregates quantification. This may lead to a significant improvement on neurodegenerative diseases treatment planning and interventions prevention

Assessment of 3D scanners for modeling Pectus Carinatum corrective bar

Pectus Carinatum (PC) is a chest deformity consisting on the anterior protrusion of the sternum and adjacent costal cartilages. Non-operative corrections, such as the orthotic compression brace, require previous information of the patient chest surface, to improve the overall brace fit. This paper focuses on the validation of the Kinect scanner for the modelling of an orthotic compression brace for the correction of Pectus Carinatum. To this extent, a phantom chest wall surface was acquired using two scanner systems – Kinect and Polhemus FastSCAN – and compared through CT. The results show a RMS error of 3.25mm between the CT data and the surface mesh from the Kinect sensor and 1.5mm from the FastSCAN sensor

Real-time 3D interactive segmentation of echocardiographic data through user-based deformation of B-spline explicit active surfaces

Image segmentation is an ubiquitous task in medical image analysis, which is required to estimate morphological or functional properties of given anatomical targets. While automatic processing is highly desirable, image segmentation remains to date a supervised process in daily clinical practice. Indeed, challenging data often requires user interaction to capture the required level of anatomical detail. To optimize the analysis of 3D images, the user should be able to efficiently interact with the result of any segmentation algorithm to correct any possible disagreement. Building on a previously developed real-time 3D segmentation algorithm, we propose in the present work an extension towards an interactive application where user information can be used online to steer the segmentation result. This enables a synergistic collaboration between the operator and the underlying segmentation algorithm, thus contributing to higher segmentation accuracy, while keeping total analysis time competitive. To this end, we formalize the user interaction paradigm using a geometrical approach, where the user input is mapped to a non-cartesian space while this information is used to drive the boundary towards the position provided by the user. Additionally, we propose a shape regularization term which improves the interaction with the segmented surface, thereby making the interactive segmentation process less cumbersome. The resulting algorithm offers competitive performance both in terms of segmentation accuracy, as well as in terms of total analysis time. This contributes to a more efficient use of the existing segmentation tools in daily clinical practice. Furthermore, it compares favorably to state-of-the-art interactive segmentation software based on a 3D livewire-based algorithm.