Prognostic relevance of TTF-1 and MMP-9 expression in advanced lung adenocarcinoma

Background: The thyroid transcription factor-1 (TTF-1) is a tissue-specific transcription factor that Could playan important role in cell differentiation and morphogenesis of lung tumors. Matrix metalloproteinase-9 (MMP-9) is a protease commonly expressed in non-small cell lung cancer, conferring angiogenic and metastatic potential. Methods: We assessed TTF-1 and MMP-9 tumor expression by immunohistochemistry in 51 patients with lung adenocarcinoma, stage 11113 or IV, treated with platinum regimens. A bicategorical prognostic model was obtained using the Kaplan-Meier method, COX regression, and conjunctive consolidation. Results: The median expression of TTF-1 was 30.0% (range: 0-85.9%). All tumors expressed MMP-9 (median: 78.7%: range: 15.2-96.1%). Median survival was 41.6 weeks, with estimated 1- and 2-year survival rates of 45.0% and 22.0%, respectively. Poor performance status (Karnofsky scale) - hazards ratio(HR): 1.03. 95% confidence interval (CI): 1.01-1.06: low TTF-1 expression (<40%) - FIR: 4.00, 95% CI: 1.75-9.09: and high MMP-9 expression (>= 80%) - HR: 2.82, 95% CI: 1.30-6.08 were independent prognostic factors. Patients could be stratified in three death risk groups according to markers expression: low risk (high TTF-1 and low MMP-9; median survival: 127.6 weeks), intermediate risk (low TTF-1 OF high MMP-9; median survival: 39.0 weeks): and high risk (low TTF-1 and high MMP-9: median survival: 16.4 weeks). Conclusion: TTF-1 and MMP-9 tumor expression as detected by immunohistochemistry may allow identification of different, clinically meaningful, prognostic groups of advanced lung adenocarcinoma patients treated with platinum regimens. (C) 2008 Elsevier Ireland Ltd. All rights reserved.

Acute alterations in anorectal manometry induced by proximal and distal sphincterotomy. Experimental studies on piglets

Anal incontinence causes psychological, social and adaptive troubles prejudicial to the quality of life both in children and adults. Therefore, the detailed knowledge of its causes and the improvement of diagnostic and therapeutic methods increase the possibilities of a more adequate social life to patients with congenital anomalies or sphincteric lesions or degenerations. In this work, a manometric study was developed through an experimental model so as to analyze alterations in behavior of muscle groups responsible for the anorectal sphincteric mechanism, previous to and after proximal and distal lesions. Twenty-two pigs aged between 25 and 30 days, weighing 5-7 kg, were randomly divided into two groups. They were submitted to lesions of different levels in the anorectal muscle. The animals were studied by anorectal manometry (rectoanal inhibitory reflex and vector volume) before and after the lesions. The Student t test and the Wilcoxon test were applied for the statistical analyses, considered p <= 0.05. The proximal lesion preserved sphincter relaxation, retarding its closure [speed of relaxation recovery 4.35 +/- 2.10 vs. 2.70 +/- 1.32 mm/s (p = 0.001)], but it reduced the maximum pressure [62.45 +/- 20.02 vs. 40.36 +/- 12.59 mmHg (p = 0.004)] and vector volume [2,749 +/- 921 vs. 1,591 +/- 1,379 mmHg(2)cm (p = 0.005)]. There was an increment in the high-pressure zone [5.09 +/- 1.04 vs. 6.36 +/- 1.50 mm (p = 0.005)], but the asymmetry percentage and the sphincter length were maintained. The distal lesion did not alter the rectoanal inhibitory reflex, the high-pressure zone length, the asymmetry percentage, or the vector volume. Nevertheless, the sphincter length increased [11.82 +/- 2.82 vs. 14.09 +/- 2.39 mm (p = 0.022)] and the maximum pressure decreased [60.55 +/- 22.05 vs. 40.91 +/- 13.41 mmHg (p = 0.004)]. The alterations observed due to proximal lesion of the anorectal sphincter suggest a direct and more important interference of the levator ani muscle in the function of the sphincteric musculature than that caused by the distal lesion.

Bond Strength of Epiphany Sealer Prepared with Resinous Solvent

This study evaluated in vitro the bond strength of Epiphany sealer prepared with resinous solvent of Epiphany system (Thinning resin) by using a push-out test. Forty maxillary canines were sectioned transversally below the cementoenamel junction to provide 4-mm-thick dentin disks that were centered in aluminum rings and embedded in acrylic resin. Root canals were prepared with tapered diamond bur. Intraradicular dentin was treated with 1% NaOCl for 30 minutes, 17% ethylenediaminetetraacetic acid for 5 minutes, and flushed with distilled water for 1 minute. The specimens were randomly distributed into 4 groups (n = 10) according to the filling material: GI, Epiphany without photoactivation; GII, Epiphany prepared with solvent without photoactivation; Gill, Epiphany followed by photoactivation; and GIV, Epiphany prepared with solvent followed by photoactivation. After the setting time, the specimens were submitted to the push-out test. The highest mean value (14.91 +/- 2.82 MPa) was obtained with Epiphany prepared with solvent followed by photoactivation (GIV), which was statistically different (P < .01) from the other groups. Groups I (8.15 +/- 2.47 MPa), II (9.46 +/- 2.38 MPa), and III (9.80 +/- 2.51 MPa) had inferior bond strength values and were statistically similar among themselves (P > .01). The resinous solvent of Epiphany system increased the bond strength of Epiphany sealer to dentin walls when followed by photoactivation. (J Endod 2009;35: 251-255)

Evaluation of the Abrasiveness of Dentifrices for Complete Dentures

Purpose: This study analyzed the surface roughness and weight loss in Plex Glass specimens caused by dentifrices, one conventional (Sorriso) and three specific for dentures. Materials and Methods: Specimens (n = 6) of Plex Glass were divided into 5 groups including: negative control (water); positive control 1 (Sorriso) and 2 (Corega Brite); Experimental 1 (containing Chloramine T, antimicrobial agent); and Experimental 2 (containing Zonyl, detergent). Brushing was performed in a toothbrushing machine (Pepsodent) with a soft brush and a suspension of toothpaste and distilled water for 300 minutes, representing 6 years of brushing. Weight was measured initially and after the trial period; roughness was measured after the trial period only. The results of roughness and weight loss were analyzed using ANOVA and Tukey tests at 5%. Results: The negative control (2.82 +/- 4.41 mg) showed the lowest weight loss. Experimental 1 (13.62 +/- 4.29 mg) and Experimental 2 (15.4 +/- 5.80 mg) were equal statistically, and Sorriso (23.22 +/- 7.23 mg) and Corega (28.83 +/- 6.34 mg) produced the greatest weight loss. Concerning roughness, the negative control group (0.03 +/- 0.01 mu m) showed the lowest value. No significant differences were found between Corega (13.43 +/- 1.65 mu m), Experimental 1 (12.28 +/- 0.85 mu m), and Experimental 2 (10.68 +/- 2.56 mu m). The Sorriso toothpaste produced the greatest amount of surface roughness (19.15 +/- 2.36 mu m). Conclusion: Of the tested dentifrices, the experimental preparations proved to be the least abrasive and resulted in the lowest weight loss after brushing of the acrylic. Based on these findings, the use of these experimental dentifrices is advocated. Further evaluation based on the ability of these preparations to remove biofilms is required.

Genotype-by-management interactions for grain yield and grain protein concentration of wheat

The magnitude of genotype-by-management (G x M) interactions for grain yield and grain protein concentration was examined in a multi-environment trial (MET) involving a diverse set of 272 advanced breeding lines from the Queensland wheat breeding program. The MET was structured as a series of management-regimes imposed at 3 sites for 2 years. The management-regimes were generated at each site-year as separate trials in which planting time, N fertiliser application rate, cropping history, and irrigation were manipulated. irrigation was used to simulate different rainfall regimes. From the combined analysis of variance, the G x M interaction variance components were found to be the largest source of G x E interaction variation for both grain yield (0.117 +/- 0.005 t(2) ha(-2); 49% of total G x E 0.238 +/- 0.028 t(2) ha(-2)) and grain protein concentration (0.445 +/- 0.020%(2); 82% of total G x E 0.546 +/- 0.057%(2)), and in both cases this source of variation was larger than the genotypic variance component (grain yield 0.068 +/- 0.014 t(2) ha(-2) and grain protein 0.203 +/- 0.026%(2)). The genotypic correlation between the traits varied considerably with management-regime, ranging from -0.98 to -0.31, with an estimate of 0.0 for one trial. Pattern analysis identified advanced breeding lines with improved grain yield and grain protein concentration relative to the cultivars Hartog, Sunco and Meteor. It is likely that a large component of the previously documented G x E interactions for grain yield of wheat in the northern grains region are in part a result of G x M interactions. The implications of the strong influence of G x M interactions for the conduct of wheat breeding METs in the northern region are discussed. (C) 2001 Elsevier Science B.V. All rights reserved.

Minor physical anomalies and quantitative measures of the head and face in patients with psychosis

Background: The aim of this study was to examine minor physical anomalies and quantitative measures of the head and face in patients with psychosis vs healthy controls. Methods: Based on a comprehensive prevalence study of psychosis, we recruited 310 individuals with psychosis and 303 controls. From this sample, we matched 180 case-control pairs for age and sex. Individual minor physical anomalies and quantitative measures related to head size and facial height and depth were compared within the matched pairs. Based on all subjects, we examined the specificity of the findings by comparing craniofacial summary scores in patients with nonaffective or affective psychosis and controls. Results: The odds of having a psychotic disorder were increased in those with wider skull bases (odds ratio [OR], 1.40; 95% confidence interval [CI], 1.02-1.17), smaller lower-facial heights (glabella to subnasal) (OR, 0.57; 95% CI, 0.44-0.75), protruding ears (OR, 1.72; 95% CI, 1.05-2.82), and shorter (OR, 2.29; 95% CI, 1.37-3.82) and wider (OR, 2.28; 95% CI, 1.43-3.65) palates. Compared with controls, those with psychotic disorder had skulls that were more brachycephalic. These differences were found to distinguish patients with nonaffective and affective psychoses from controls. Conclusions: Several of the features that differentiate patients from controls relate to the development of the neuro-basicranial complex and the adjacent temporal and frontal lobes. Future research should examine both the temporal lobe and the middle cranial fossa to reconcile our anthropomorphic findings and the literature showing smaller temporal lobes in patients with schizophrenia. Closer attention to the skull base may provide clues to the nature and timing of altered brain development in patients with psychosis.

Automatic modeling of pectus excavatum corrective prosthesis using artificial neural networks

Pectus excavatum is the most common deformity of the thorax. Pre-operative diagnosis usually includes Computed Tomography (CT) to successfully employ a thoracic prosthesis for anterior chest wall remodeling. Aiming at the elimination of radiation exposure, this paper presents a novel methodology for the replacement of CT by a 3D laser scanner (radiation-free) for prosthesis modeling. The complete elimination of CT is based on an accurate determination of ribs position and prosthesis placement region through skin surface points. The developed solution resorts to a normalized and combined outcome of an artificial neural network (ANN) set. Each ANN model was trained with data vectors from 165 male patients and using soft tissue thicknesses (STT) comprising information from the skin and rib cage (automatically determined by image processing algorithms). Tests revealed that ribs position for prosthesis placement and modeling can be estimated with an average error of 5.0 ± 3.6 mm. One also showed that the ANN performance can be improved by introducing a manually determined initial STT value in the ANN normalization procedure (average error of 2.82 ± 0.76 mm). Such error range is well below current prosthesis manual modeling (approximately 11 mm), which can provide a valuable and radiation-free procedure for prosthesis personalization.

Automatic modeling of pectus excavatum corrective prosthesis using artificial neural networks

Pectus excavatum is the most common deformity of the thorax. Pre-operative diagnosis usually includes Computed Tomography (CT) to successfully employ a thoracic prosthesis for anterior chest wall remodeling. Aiming at the elimination of radiation exposure, this paper presents a novel methodology for the replacement of CT by a 3D laser scanner (radiation-free) for prosthesis modeling. The complete elimination of CT is based on an accurate determination of ribs position and prosthesis placement region through skin surface points. The developed solution resorts to a normalized and combined outcome of an artificial neural network (ANN) set. Each ANN model was trained with data vectors from 165 male patients and using soft tissue thicknesses (STT) comprising information from the skin and rib cage (automatically determined by image processing algorithms). Tests revealed that ribs position for prosthesis placement and modeling can be estimated with an average error of 5.0 ± 3.6 mm. One also showed that the ANN performance can be improved by introducing a manually determined initial STT value in the ANN normalization procedure (average error of 2.82 ± 0.76 mm). Such error range is well below current prosthesis manual modeling (approximately 11 mm), which can provide a valuable and radiation-free procedure for prosthesis personalization.

Fissuras lábio-palatais: estudo caso-controle

Realizou-se um estudo caso-controle com o propósito de se detectar possíveis fatores de risco para o aparecimento de fissuras orais. Foram objeto de análise: local de moradia da mãe nos quatro primeiros meses de gestação, poluição, aplicação de pesticida/herbicida na lavoura, doenças dos pais, doenças da mãe nos quatro primeiros meses de gestação, ingestão medicamentosa nesse período, hereditariedade, tabagismo, consumo de bebida alcoólica e exposição a raio-X. Foram aplicados formulários às mães referentes aos 450 casos, sendo 354 portadores de fissuras labiais ou lábio-palatais e 96 de fissuras palatinas, e às mães referentes aos 450 controles. Empregou-se análise multivariada e as variáveis hereditariedade (RR=4,96), epilepsia na mãe (RR=2,39) e ingestão de anti-inflamatório (RR=2,59) foram consideradas fatores de risco para fissuras labiais ou lábio-palatais. As variáveis hereditariedade (RR=2,82) e poluição (RR=2,58) foram consideradas fatores de risco para fissuras palatinas.

Factores asociados a mortalidad perinatal en el hospital general de Chiapas, México

OBJETIVO: El objetivo del estudio es identificar factores socioeconómicos, gineco-obstétricos y del producto asociados a mortalidad perinatal. MÉTODOS: Se realizó un estudio de casos y controles pareado. Se consideró caso a los nacidos vivos o muertos que nacieron y fallecieron entre las 28 semanas de gestación a los 7 días de vida extrauterina. y control al producto nacido vivo entre las 28 semanas de gestación y los 7 días de vida extrauterina. Los datos se obtuvieron de los expedientes clínicos hospitalarios. Se estudiaron 99 casos y 197 controles. Se hizo un análisis estadístico utilizando Stata 6.0. RESULTADOS La media de edad de la madre fue de 24.82 años y del producto de 37.78 semanas de gestación. El promedio de peso del producto fue de 2,760 gramos. Los factores asociados a mortalidad perinatal fueron: ocupación del padre agricultor (RM ajustada 3,31; IC 95% 1,26-8,66); índice de riesgo obstétrico alto (RM ajustada 10,57; IC 95% 2,82-39,66), antecedente de cesárea (RM ajustada 2,75; IC 95% 1,37-5,51); cinco y más consultas prenatales (RM ajustada 4,43; IC 95% 1.86-10,54); producto pretérmino (RM ajustada 9,20; IC 95% 4,39-19,25). CONCLUSIONES: Los resultados muestran que es necesario implementar medidas de prevención y control que aseguren la identificación del riesgo en las mujeres embarazadas, con el fin de abatir la incidencia de mortalidad perinatal.

Ocupação e mortalidade na Marinha do Brasil

OBJETIVO: Descrever a distribuição da mortalidade por doenças do aparelho digestivo, geniturinário e do sistema nervoso, de acordo com a ocupação entre militares da Marinha do Brasil. MÉTODOS: Estudo exploratório da mortalidade proporcional conduzido com militares do sexo masculino lotados na Marinha do Brasil, que faleceram no período de 1991 a 1995. A população do estudo corresponde a todo o contingente da corporação nesse mesmo período. Os dados provêm de certidões de óbitos requeridas para concessão de pensões de dependentes e história ocupacional correspondente. As causas básicas de morte foram codificadas de acordo a Classificação Internacional de Doenças (9ª revisão). RESULTADOS: Militares apresentaram mortalidade proporcional aumentada para as doenças do fígado relacionadas com o consumo do álcool (razão de mortalidade proporcional ajustada (RMPaj=2,03; IC 95%: 1,26 3,00), pancreatite (RMPaj=2,03; IC 95%: 1,06 3,38), hemorragia digestiva (RMPaj=1,61; IC 95%: 1,10 2,23), doenças renais crônicas (RMPaj=2,82; IC 95%: 1,98 3,84), doença de Parkinson (RMPaj=3,00; IC 95%: 1,27 5,72) e degenerações cerebrais (RMPaj=2,88; IC 95%: 1,14 5,70) em relação a população de referência. Associação não estatisticamente significante foi observada entre operadores de radar (RMP=6,50; IC 95%: 1,43 29,56) e doenças do sistema nervoso. CONCLUSÕES: Os resultados indicam a existência de possíveis fatores de riscos ocupacionais no ambiente de trabalho da Marinha do Brasil, e a necessidade de estudos com medidas quantitativas de exposição.

Experimental Measurements and Correlation of the Solubility of Three Primary Amides in Supercritical CO2: Acetanilide, Propanamide, and Butanamide

Solubilities of three primary amides, namely, acetanilide, propanamide, and butanamide, in supercritical carbon dioxide were measured at T = (308.2, 313.2, and 323.2) K over the pressure range (9.0 to 40.0) MPa by a flow type apparatus. The solubility behavior of the three solids shows an analogous trend with a crossover region of the respective isotherms between (12 to 14) MPa. The solubility of each amide, at the same temperature and pressure, decreases from propanamide to acetanilide. Pure compound properties required for the modeling were estimated, and the solubilities of the amides were correlated by using the Soave-Redlich-Kwong cubic equation of state with an absolute average relative deviation (AARD) from (1.3 to 6.1) %.

Risk factors for osteoporotic fractures and low bone density in pre and postmenopausal women

OBJECTIVE: To estimate the prevalence and analyze risk factors associated to osteoporosis and low-trauma fracture in women. METHODS: Cross-sectional study including a total of 4,332 women older than 40 attending primary care services in the Greater São Paulo, Southeastern Brazil, between 2004 and 2007. Anthropometrical and gynecological data and information about lifestyle habits, previous fracture, medical history, food intake and physical activity were obtained through individual quantitative interviews. Low-trauma fracture was defined as that resulting from a fall from standing height or less in individuals 50 years or older. Multiple logistic regression models were designed having osteoporotic fracture and bone mineral density (BMD) as the dependent variables and all other parameters as the independent ones. The significance level was set at p<0.05. RESULTS: The prevalence of osteoporosis and osteoporotic fractures was 33% and 11.5%, respectively. The main risk factors associated with low bone mass were age (OR=1.07; 95% CI: 1.06;1.08), time since menopause (OR=2.16; 95% CI: 1.49;3.14), previous fracture (OR=2.62; 95% CI: 2.08;3.29) and current smoking (OR=1.45; 95% CI: 1.13;1.85). BMI (OR=0.88; 95% CI: 0.86;0.89), regular physical activity (OR=0.78; 95% CI: 0.65;0.94) and hormone replacement therapy (OR=0.43; 95% CI: 0.33;0.56) had a protective effect on bone mass. Risk factors significantly associated with osteoporotic fractures were age (OR=1.05; 95% CI: 1.04;1.06), time since menopause (OR=4.12; 95% CI: 1.79;9.48), familial history of hip fracture (OR=3.59; 95% CI: 2.88;4.47) and low BMD (OR=2.28; 95% CI: 1.85;2.82). CONCLUSIONS: Advanced age, menopause, low-trauma fracture and current smoking are major risk factors associated with low BMD and osteoporotic fracture. The clinical use of these parameters to identify women at higher risk for fractures might be a reasonable strategy to improve the management of osteoporosis.

Modificações nucleares em células parasitadas pelo Trypanosoma cruzi em chagásicos crônicos

Através do estudo da musculaturalisa da parede da veia central das supra-renais de chagásicos crônicos foram identificados núcleos em 18 dentre 40 células parasitadaspelo Trypanosoma cruzi. Com o auxílio de uma ocular micrométrica foram tomados dois diâmetros de cada ninho e núcleo, obtendo-se suas médias e desvios padrões (25,7 µm ± 17,2 e 12 µm ± 5,3 e 7,5 µm ± 2,82 para diâmetros dos ninhos e dos núcleos para células mononucleadas e binucleadas respectivamente). A relação diâmetro do núcleo/diâmetro do ninho foi de 0,5 ± 0,16. 83,3% dos ninhos eram mononucleados e apenas 16,7% binucleados. A média do volume nuclear para as células parasitadas foi de 1204µm³ ± 807,0 e para as células musculares lisas não parasitadasfoi de 69,6µm ± 7,2. A forma e o contorno nucleares eram variados e irregulares. Os núcleos hipercromáticos ou vesiculosos, com membrana cromatínica geralmente espessa e bem definida, freqüentemente mostrando um a dois nucléolos por secção, podendo, no entanto, serem encontrados até 8 nucléolos. Sendo as alterações nucleares descritas freqüentes nos chagásicos crônicos, épossível que sejam a expressão morfológica de importantes interações entre o T. cruzi e o leiomiócito.

Class-I human leukocyte alleles in leprosy patients from Southern Brazil

INTRODUCTION: The present study was designed to investigate a possible role of HLA (histocompatibility leucocyte antigen) class-I alleles (HLA-A, -B, and -C) in leprosy patients from Southern Brazil. METHODS: Two hundred and twenty-five patients with leprosy and 450 individuals for the control group were involved in this research. HLA genotyping was performed through PCR-SSO protocols (One Lambda, USA); the frequency of these alleles was calculated in each group by direct counting, and the frequencies were then compared. RESULTS: There was an association between HLA-A*11 (6.9% vs 4.1%, p=0.0345, OR=1.72, 95% CI=1.05-2.81), HLA-B*38 (2.7% vs. 1.1%, p=0.0402, OR=2.44, 95% CI=1.05-5.69), HLA-C*12 (9.4% vs. 5.4%, p=0.01, OR=1.82, 95% CI=1.17-2.82), and HLA-C*16 (3.1% vs. 6.5%, p=0.0124, OR=0.47, 95% CI=0.26-0.85) and leprosy per se. In addition, HLA-B*35, HLA-C*04, and HLA-C*07 frequencies were different between lepromatous (LL) and tuberculoid (TT) patients. However, after adjusting for the number of alleles compared, Pc values became nonsignificant. CONCLUSIONS: Although our results do not support the previous findings that HLA class-I alleles play a role in leprosy pathogenesis, we suggest new studies because of the importance of the association between the HLA and KIR in the innate immune response to leprosy.