Efeito da utilização de antioxidante no diluidor para a criopreservação de sêmen bovino avaliado através de testes complementares, inseminação artificial e fecundação in vitro

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Potential of adjuvants to reduce drift in agricultural spraying

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influence of spray mixture volume and flight height on herbicide deposition in aerial applications on pastures

The objective of the present study was to analyze the influence of spray mixture volume and flight height on herbicide deposition in aerial applications on pastures. The experimental plots were arranged in a pasture area in the district of Porto Esperidião (Mato Grosso, Brazil). In all of the treatments, the applications contained the herbicides aminopyralid and fluroxypyr (Dominum) at the dose of 2.5 L c.p. ha-1, including the adjuvant mineral oil (Joint Oil) at the dose of 1.0 L and a tracer to determine the deposition by high-performance liquid chromatography (HPLC) (rhodamine at a concentration of 0.6%). The experiment consisted of nine treatments that comprised the combinations of three spray volumes (20, 30 and 50 L ha-1) and three flight heights (10, 30 and 40 m). The results showed that, on average, there was a tendency for larger deposits for the smallest flight heights, with a significant difference between the heights of 10 and 40 m. There was no significant difference among the deposits obtained with the different spray mixture volumes.

The seasonal and ovarian status effects on in vitro production of domestic cat embryos between Equator and Tropic of Capricorn

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of adjuvants on the amount of air included in droplets generated by spray nozzles

The air included in droplets generated by spray nozzles directly int0erferes in transport, deposition and retention of the droplets after its impact on the target. The objective of this study was to analyze the interference of adjuvants in the amount of air included in droplets generated by spray nozzles. The treatments were composed by four spray solutions containing mineral oil, vegetable oil, surfactant and water, and three spray nozzles, two air induction type and one pre-orifice. The air included was calculated by the difference between the volume of spray mix (air plus liquid) and only the liquid, which was made by means of sprayed samples captured in a funnel and collected in a graduated cylinder. The surface tension was estimated by the gravimetric method using a precision scale and a graduated pipette. The surfactant provided the largest percentage of air included in the spray. For the surface tension, the mineral oil and the surfactant had the lowest values. It was concluded that the use of adjuvants had a direct influence on the percentage of air included. In addition, products with greater ability to reduce surface tension and to form homogeneous solutions provided the increase in the percentage of air included in the droplet.

Adjuvantes na deriva de 2,4-D + glyphosate em condições de campo

The aim of the research was to evaluate the effect of adjuvants on the spray drift applications from mixture of 2,4-D + glyphosate. The trial was carried out in field conditions in a completely randomized design. The treatments corresponded to solutions containing mixture of the herbicides 2,4-D + glyphosate (670 and 1068g ha-1, respectively) adding the adjuvants (v v-1): mineral oil (0.5%); anti-drift agent (0.09%); spreader-sticker A (0.1%); liquid fertilizer (0.05%); spreader-sticker B (0.25%); and only herbicides without adjuvantes (control). Nylon strings were used to drift determination outside the application area (1, 5, 10, 20, 50, 100 and 200 m away) with 4 replications and six foam cylinders placed on the boom of the sprayer were used to collect the droplets subject to drift. The applications were performed simultaneously, using a specific salt tracer for each spray solution to quantify the deposits by spectrophotometer. It was not possible to verify effect of the adjuvants on drift at different distances of the application area. Based on droplets collected above the boom spray, it was found that susceptibility to drift was lower with the mineral oil and the anti-drift agent. The drift risk was higher with the liquid fertilizer and the spreader-sticker B.

Caracterização da pulverização de mistura de tanque com diferentes pontas de jato plano

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Desempenho de adjuvantes na qualidade da aplicação e na retenção e translocação de fungicida na cultura da soja

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Controle biológico de thaumastocoris peregrinus (Hemiptera: thaumastocoridae) com fungos entomopatogênicos

Pós-graduação em Agronomia (Proteção de Plantas) - FCA

Qualidade da aplicação de inseticida em amendoim (arachis hypogaea l.), com e sem adjuvantes na calda, sob chuva simulada

The present work aimed to evaluate the volumetric distribution profiles, droplet spectra, surface tension, contact angle of droplet and the spraying liquid deposition over the peanut leaves (Arachis hypogaea L.), under artificial rain, in comparison with deposition without rain, using two hydraulic nozzle models of plain fan and insecticide spraying liquids with and without adjuvants addition. It were used a patternator for volumetric distribution analysis, a laser particles analyzer to evaluate droplet spectra produced by SF 110015 and XR 110015 nozzles and tensiometer for droplet tension and contact angle. The spraying liquids evaluated were: water, lambda-cialotrina, lambda-cialotrina + nitrogen fertilizer and lambda-cialotrina + mineral oil. All experiments followed a completely randomized design. Data were submitted to variance analysis by F test and the means comparisons by Scott-Knott test at 5% of probability. According to the results, it must be considered the maximum spacing in spray boom usage of 50 and 90 cm between the nozzles SF110015 and XR110015, respectively. The adjuvants effects on droplet spectra have shown addicted to the nozzle and the product used, and the adjuvants addition to the spraying liquid affected the potential risk of drift; The Volumetric Median Diameter (VMD) of produced droplets by nozzles filled into thin class and were not influenced by the adjuvants. The nitrogen fertilizer adjuvant may be indicated to promote improvements on coverage and droplet deposition on target.

Qualidade da pulverização em volume reduzido para o controle do bicho-mineiro Leucoptera coffeella (Guérin-Mèneville & Perrottet, 1842) (Lepidoptera: Lyonetiidae)

Pós-graduação em Agronomia (Entomologia Agrícola) - FCAV

Efeitos da exposição prolongada ao bisfenol-A sobre a próstata de gerbilos adultos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Micro-fungos de interesse para o setor de petróleo, gás e biocombustíveis

Oil is a hydrocarbon mixture of various sizes, including saturated and aromatic compounds. Natural gas is a mixture of gaseous hydrocarbons and its main component is methane. In our society, the great demand for these fuels requires fast extraction, transportation and refining, increasing the number of accidents that compromise the environment. Oil is a finite resource and it is necessary to reduce the problems related to the question concerning environmental pollution which has encouraged the search for alternative fuel sources in our country. So today we have two major biofuels: ethanol and biodiesel. Concurrently, many studies have been done directed toward the isolation of microorganisms capable of degrading petrochemical industrial wastes, most of them using as a source of isolation soil and water collected in a contaminated environment. Isolation from alternative substrates has emerged as a new strategy that has provided satisfactory results. In this work, we present the leaf-cutter ants of the Attini tribe as a source for the isolation of micro-fungi with the potential for hydrocarbon degradation. These insects have a social way of life and a highly specialized system of intra and interspecific communication, which is based on the recognition of individuals through volatile chemical compounds, the majority hydrocarbons, stored in their exoskeleton. The micro-environment exoskeleton of Attini ants (genus Atta) used in this work proved to be a rich source of microbial biodiversity, as other studies have found. The flotation isolation technique applied here allowed the achievement of 214 micro-fungi, 118 representatives of the dematiaceous fungi group and 96 hyaline filamentous fungi. They were submitted to toluene degradation tests and at least one strain of each genus presented good results, namely Teratosphaeria, Exophiala, Cladosporium, Penicillium, Aspergillus... (Complete abstract click electronic access below)

Fungos fitopatógenos associados às formigas cortadeiras (Formicidae: Tribo Attini)

The ants of genus Atta belong to the Attine tribe (order Hymenoptera, family Formicidae, subfamily Myrmicinae) and are commonly known as leaf-cutting ants for having the habit of cutting several vegetable species used as substrate for growing mutualistic fungus (Agaricales: Lepiotaceae). Recent studies showed that, in addition to that, other fungi may occur in the nests in a dorment state or participate in the functioning dynamic of this symbiosis. Researches related to surveys of fungus biodiversity in nests of different Atta species have found important phytopathogenic representatives. In Brazil, studies about integrated management of plagues, developed by Embrapa Meio Ambiente (Embrapa Environment), point out the need of higher investments in projects that involve the phytopathogenic transmission by insects in order to reduce costs to control them or minimize environmental impact. The purpose of this study was to broaden the knowledge about the ecology of these fungi, isolating and identifying species associated with Attine tribe ants, thus understanding the scope of pathogenic and phytopathogenic species spread by these ants. For that reason, gynes were collected from Atta laevigata and Atta capiguara anthills located at Unesp Botucatu (São Paulo, Brazil) campus. In order to isolate the fungus, the mineral oil floating technique was used. The identification of the isolated fungi was done based on microscopic and molecular characteristics using DNA ribosomal sequencing. The most highly abundant genera found so far were: Cladosporium, Exophiala, Penicillium, Acremonium, Phialophora and Teratosphaeria. Representatives of the genera Exophiala, Phialophora and Cladosporium may be human pathogens, whereas Teratosphaeria and Penicillium are related to diseases in Eucalyptus and citric fruits, respectively. The results show that these ants may host important fungal species besides the ones already... (Complete abstract click electronic access below)

Avaliação do potencial de sistemas nanoestruturados para administração cutânea de dexametasona

Os sistemas nanoestruturados são capazes de aumentar a permeação de um fármaco sem alterar as suas propriedades e direcioná-lo para regiões específicas favorecendo a interação com sistemas biológicos. Algumas formações dos sistemas nanoestruturados cristais líquidos, microemulsões podem permitir a liberação lenta do fármaco o que propicia um efeito mais prolongado da ação deste, aumento da solubilidade e estabilidade de fármacos, capacidade de agir como sistemas reservatórios, diminuição da toxicidade, bem como melhor a biodisponibilidade dos fármacos. A dexametasona (DMA) é um corticóide muito utilizado, mas que possui muitos efeitos colaterais,como eritema,hipertensão arterial,acne,aumento de peso e apetite,entre outros,devido sua capacidade de atravessar o estrato córneo por difusão, assim ele é capaz de alcançar a circulação e causar efeitos colaterais sistêmicos. Para diminuir a ação desses efeitos indesejáveis é preciso controlar a permeação desta classe de fármaco e aumentando a sua retenção cutânea. O objetivo deste trabalho foi avaliar o potencial de sistemas nanoestruturados estabilizados com álcool cetílico etoxilado e propoxilado(PRO) como tensoativo, ácido oléico (AO) ou óleo mineral (OM) como fases oleosas para a administração cutânea de DMA. Estas fases oleosas foram selecionadas por apresentarem características físico-químicas diferentes, bem como promoveram diferenças estruturais em formulações de estudos anteriores. A caracterização por microscopia de luz polarizada mostrou que a dexametasona pouco interfere na estruturação das formulações. A reologia mostrou que as formulações, com ácido oléico como fase oleosa, AO1 e AO2 são as formulações com melhores condições de aplicação cutânea. Os cristais líquido de fase cúbica, foram os que mais foram capazes de solubilizar DMA, além de apresentarem... (Resumo completo, clicar acesso eletrônico abaixo)