Resistencia al corte de los paquetes de impermeabilización utilizados en vertederos

La determinación de la resistencia al corte de los contactos entre los geosintéticos que normalmente se emplean para la impermeabilización de vertederos constituye un factor de gran importancia en os cálculos de la estabilidad de los mismos. En este artículos se analiza la conveniencia de usar la resistencia al corte pico o residual en los cáculos, relacionándolo a su vez con la hipótesis de cálculo y los factores de seguridad mínimos a conseguir en cada caso. Además se incluye un ejemplo práctico que ilustra estos conceptos mediante los resultados de los análisis tenso-deformacionales efectuados utilizando métodos numéricos.

Microstructure and mechanical properties degradation at high temperature of tungsten alloys processed by forging

One of the challenges of science and engineering nowadays is to develop new ways to supply energy in a sustainable and ecological mode. The fussion energy could be the final answer but a myriad of problems must be solved previously.

Mechanical behavior of alkali-cement as function of the temperature.

This investigation reports on a comparative study of the mechanical behavior at different temperatures of three different alkali-activated fly ash pastes chemically activated using sodium silicate. A control Portland cement (OPC) was used as a reference. In an attempt to simulate the conditions prevailing in the event of accidental fire, post-thermal mechanical tests were performed to determine the residual strength. It has therefore been established that FA based cements can be fabricated for construction purposes and these materials have great potential for fire resistance applications.

International Materials Science Seminars: A Bridge between Two Continents

International Materials Science Seminars aim at combining the expertise of several advanced research groups and creating an unique opportunity for foreign and Spanish students in terms of cutting-edge research.

Influence of Temperature and Atmosphere in Tungsten-Titanium-Lanthana Alloys

The most promising materials to be used as Plasma Facing Components(PFC),in the International Thermonuclear Experimental Reactor (ITER), are tungsten alloys. However these materials have to withstand extreme operating conditions such as those that will be used inside the reactor.

Microstructure and mechanical properties at high temperature of SiC-matrix by electrophoretic deposition and polymer infiltration and pyrolysis process

The EFDA-ITER programme for materials wants to develop new structural materials for future nuclear magnetic fusion reactors. In this context, special attention must be paid in the development of new composite materials that could support the hard working conditions of the nuclear fusion reactors: high temperature, high stresses, and high radiation.

Las bóvedas de crucería españolas s.XV y XVI

Título del trabajo presentado: Las bóvedas de crucería españolas S.XV y XVI Entidad organizadora: Sociedad Española de Historia de la Construcción Congreso: Tercer Congreso Nacional de Historia de la Construcción

La Concha de la Plateria en la catedral de Santiago de Compostela: la estereotomía de las bóvedas cónicas

Título del trabajo presentado: La Concha de la Platería en la Catedral de Santiago de Compostela: la estereotomía de las bóvedas cónicas Entidad organizadora: Sociedad Española de Historia de la Construcción Congreso : Tercer Congreso Nacional de Historia de la Construcción

Patent elucidation for clil and vice versa understanding the inventor´s mind

In this paper we present an English-medium instruction (EMI) team-teaching initiative to be soon implemented within the Agronomic Engineering masters programme at the Technical University of Madrid (UPM). Through the patent genre we not only intend to teach specific agronomical syllabi contents synchronically and diachronically, but also broaden our students’ academic and professional literacies, help them practice and improve their communication abilities in English as a lingua franca, and motivate them as future autonomous professionals while fostering the exercise of higher-level transversal skills—critical thinking, creativity, cooperation, and entrepreneurship. We begin by introducing the current mobility trends in higher education contexts and the common misconceptions surrounding the notion of patent, and get on to describe the design and evaluation procedures of the course. To conclude, we recapitulate the main benefits of our pedagogical proposal and open windows onto further didactic applications.

Resolución numérica de un problema de valor óptimo de una opción

The option value problem with two costs is written as a variational inequality. The advantage of this formulation is that it takes place in a fixed domain. Thus no front tracking is needed for numerical approximation of the free boundary. An iterative algorithm is proposed which can be used to solve the nonlinear system obtained by finite differences or finite elements procedures. Especial care has to be taken in the design of differences finites schemes o finite elements due to the degeneracy of the differential operator. These schemes can be absortion or convection dominated nearly to the axis. This is a preliminary note to the study of this kind of problems.

Algoritmos de búsqueda de posiciones óptimas en localizaciones circulares. Aplicación a la competición política

Desarrollo de teoría y algoritmos para la búsqueda de posiciones óptimas en un espacio circular. En este trabajo se desarrolla una aplicación de los datos direccionales a la ciencia política. Se presenta un modelo en el que las preferencias políticas de los tipos de votantes de una población se representan como puntos de la circunferencia unidad y los partidos políticos buscan las posiciones óptimas en ella para captar el máximo apoyo de ese conjunto finito de tipos de votantes. Se desarrollan algoritmos de búsqueda basados en los estudios realizados y se implementa uno de ellos, realizándose simulaciones de ejemplos relacionados con el posicionamiento político e interpretándose los resultados.

A new label fusion method using graph cuts: application to hippocampus segmentation

The aim of this paper is to develop a probabilistic modeling framework for the segmentation of structures of interest from a collection of atlases. Given a subset of registered atlases into the target image for a particular Region of Interest (ROI), a statistical model of appearance and shape is computed for fusing the labels. Segmentations are obtained by minimizing an energy function associated with the proposed model, using a graph-cut technique. We test different label fusion methods on publicly available MR images of human brains.

Pre-investigation of water electrolysis for flexible energy storage at large scales: the case of the Spanish power system

This report analyzes the basis of hydrogen and power integration strategies, by using water electrolysis processes as a means of flexible energy storage at large scales.

TweetAlert: Sistema de análisis semántico de la voz de los ciudadanos en redes sociales en la ciudad del futuro

En este artículo se presenta un sistema automático de almacenamiento, análisis y visualización de información semántica extraída de mensajes de Twitter, diseñado para proporcionar a las administraciones públicas una herramienta para detectar y analizar de una manera sencilla y rápida los patrones de comportamiento de los ciudadanos, su opinión acerca de los servicios públicos, la percepción de la ciudad, los eventos de interés, etc. Además, puede ser usado como un sistema de alerta temprana, mejorando la eficiencia y rapidez de actuación de los sistemas de emergencia.

An interactive web-based learning assistant for structural analysis of continuous beams

There are significant levels of concern about the relevance and the difficulty of learning some issues on Strength of Materials and Structural Analysis. Most students of Continuum Mechanics and Structural Analysis in Civil Engineering usually point out some key learning aspects as especially difficult for acquiring specific skills. These key concepts entail comprehension difficulties but ease access and applicability to structural analysis in more advanced subjects. Likewise, some elusive but basic structural concepts, such as flexibility, stiffness or influence lines, are paramount for developing further skills required for advanced structural design: tall buildings, arch-type structures as well as bridges. As new curricular itineraries are currently being implemented, it appears appropriate to devise a repository of interactive web-based applications for training in those basic concepts. That will hopefully train the student to understand the complexity of such concepts, to develop intuitive knowledge on actual structural response and to improve their preparation for exams. In this work, a web-based learning assistant system for influence lines on continuous beams is presented. It consists of a collection of interactive user-friendly applications accessible via Web. It is performed in both Spanish and English languages. Rather than a “black box” system, the procedure involves open interaction with the student, who can simulate and virtually envisage the structural response. Thus, the student is enabled to set the geometric, topologic and mechanic layout of a continuous beam and to change or shift the loading and the support conditions. Simultaneously, the changes in the beam response prompt on the screen, so that the effects of the several issues involved in structural analysis become apparent. The system is performed through a set of web pages which encompasses interactive exercises and problems, written in JavaScript under JQuery and DyGraphs frameworks, given that their efficiency and graphic capabilities are renowned. Students can freely boost their self-study on this subject in order to face their exams more confidently. Besides, this collection is expected to be added to the "Virtual Lab of Continuum Mechanics" of the UPM, launched in 2013 (http://serviciosgate.upm.es/laboratoriosvirtuales/laboratorios/medios-continuos-en-construcci%C3%B3n)