Estrutura informacional e clivagem: análise da veiculação de informação em construções clivadas do português brasileiro contemporâneo escrito

Pós-graduação em Linguística e Língua Portuguesa - FCLAR

Temporomandibular disorders in headache patients

Objective: To identify the frequency of signs and symptoms of temporomandibular disorder (TMD) and its severity in individuals with headache. Study Design: 60 adults divided into three groups of 20 individuals: chronic daily headache (CDH), episodic headache (EH) and a control group without headache (WH). Headache diagnosis was performed according to the criteria of International Headache Society and the signs and symptoms of TMD were achieved by using a clinical exam and an anamnestic questionnaire. The severity of TMD was defined by the temporomandibular index (TMI). Results: The TMD signs and symptoms were always more frequent in individuals with headache, especially report of pain in TMJ area (CDH, n=16; EH, n=12; WH, n=6), pain to palpation on masseter (CDH, n=19; EH, n=16; WH, n=11) which are significantly more frequent in episodic and chronic daily headache. The mean values of temporomandibular and articular index (CDH patients) and muscular index (CDH and EH patients) were statistically higher than in patients of the control group, notably the articular (CDH=0.38; EH=0.25; WH=0.19) and muscular (CDH=0.46; EH=0.51; WH=0.26) indices. Conclusions: These findings allow us to speculate that masticatory and TMJ pain are more common in headache subjects. Besides, it seems that the TMD is more severe in headache patients.

Discovery potential for supersymmetry at a high luminosity upgrade of LHC14

After completion of the LHC8 run in 2012, the plan is to upgrade the LHC for operation close to its design energy root s = 14 TeV, with a goal of collecting hundreds of fb(-1) of integrated luminosity. The time is propitious to begin thinking of what is gained by even further LHC upgrades. In this report, we compute an LHC14 reach for supersymmetry in the mSUGRA/CMSSM model with an anticipated high luminosity upgrade. We find that LHC14 with 300 (3000) fb(-1) has a reach for supersymmetry via gluino/squark searches of m((g) over tilde) similar to 3.2 TeV (3.6 TeV) for m((q) over tilde) similar to m((g) over tilde), and a reach of m((g) over tilde) similar to 1.8 TeV (2.3 TeV) for m((q) over tilde) >> m((g) over tilde). In the case where m((q) over tilde) >> m((g) over tilde), then the LHC14 reach for chargino-neutralino production with decay into the Wh + 6 is not an element of(T) final state reaches to m((g) over tilde) similar to 2.6 TeV for 3000 fb(-1).

Alkaline sulfite/anthraquinone pretreatment followed by disk refining of Pinus radiata and Pinus caribaea wood chips for biochemical ethanol production

BACKGROUND: Alkaline sulfite/anthraquinone (ASA) cooking of Pinus radiata and Pinus caribaea wood chips followed by disk refining was used as a pretreatment for the production of low lignified and high fibrillated pulps. The pulps produced with different delignification degrees and refined at different energy inputs (250, 750 and 1600 Wh) were saccharified with cellulases and fermented to ethanol with Saccharomyces cerevisiae using separated hydrolysis and fermentation (SHF) or semi-simultaneous saccharification and fermentation (SSSF) processes. RESULTS: Delignification of ASA pulps was between 25% and 50%, with low glucans losses. Pulp yield was from 70 to 78% for pulps of P. radiata and 60% for the pulp of P. caribaea. Pulps obtained after refining were evaluated in assays of enzymatic hydrolysis. Glucans-to-glucose conversion varied from 20 to 70%, depending on the degree of delignification and fibrillation of the pulps. The best ASA pulp of P. radiata was used in SHF and SSSF experiments of ethanol production. Such experiments produced maximum ethanol concentration of 20 g L-1, which represented roughly90% of glucose conversion and an estimated amount of 260 L ethanol ton(-1) wood. P. caribaea pulp also presented good performance in the enzymatic hydrolysis and fermentation but, due to the low amount of cellulose present, only 140 L ethanol would be obtained from each ton of wood. CONCLUSION: ASA cooking followed by disk refining was shown to be an efficient pretreatment process, which generated a low lignified and high-fibrillated substrate that allowed the production of ethanol from the softwoods with high conversion yields. (C) 2012 Society of Chemical Industry

Electrode Materials for Ionic Liquid Based-Supercapacitors

The development of safe, high energy and power electrochemical energy-conversion systems can be a response to the worldwide demand for a clean and low-fuel-consuming transport. This thesis work, starting from a basic studies on the ionic liquid (IL) electrolytes and carbon electrodes and concluding with tests on large-size IL-based supercapacitor prototypes demonstrated that the IL-based asymmetric configuration (AEDLCs) is a powerful strategy to develop safe, high-energy supercapacitors that might compete with lithium-ion batteries in power assist-hybrid electric vehicles (HEVs). The increase of specific energy in EDLCs was achieved following three routes: i) the use of hydrophobic ionic liquids (ILs) as electrolytes; ii) the design and preparation of carbon electrode materials of tailored morphology and surface chemistry to feature high capacitance response in IL and iii) the asymmetric double-layer carbon supercapacitor configuration (AEDLC) which consists of assembling the supercapacitor with different carbon loadings at the two electrodes in order to exploit the wide electrochemical stability window (ESW) of IL and to reach high maximum cell voltage (Vmax). Among the various ILs investigated the N-methoxyethyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide (PYR1(2O1)TFSI) was selected because of its hydrophobicity and high thermal stability up to 350 °C together with good conductivity and wide ESW, exploitable in a wide temperature range, below 0°C. For such exceptional properties PYR1(2O1)TFSI was used for the whole study to develop large size IL-based carbon supercapacitor prototype. This work also highlights that the use of ILs determines different chemical-physical properties at the interface electrode/electrolyte with respect to that formed by conventional electrolytes. Indeed, the absence of solvent in ILs makes the properties of the interface not mediated by the solvent and, thus, the dielectric constant and double-layer thickness strictly depend on the chemistry of the IL ions. The study of carbon electrode materials evidences several factors that have to be taken into account for designing performing carbon electrodes in IL. The heat-treatment in inert atmosphere of the activated carbon AC which gave ACT carbon featuring ca. 100 F/g in IL demonstrated the importance of surface chemistry in the capacitive response of the carbons in hydrophobic ILs. The tailored mesoporosity of the xerogel carbons is a key parameter to achieve high capacitance response. The CO2-treated xerogel carbon X3a featured a high specific capacitance of 120 F/g in PYR14TFSI, however, exhibiting high pore volume, an excess of IL is required to fill the pores with respect to that necessary for the charge-discharge process. Further advances were achieved with electrodes based on the disordered template carbon DTC7 with pore size distribution centred at 2.7 nm which featured a notably high specific capacitance of 140 F/g in PYR14TFSI and a moderate pore volume, V>1.5 nm of 0.70 cm3/g. This thesis work demonstrated that by means of the asymmetric configuration (AEDLC) it was possible to reach high cell voltage up to 3.9 V. Indeed, IL-based AEDLCs with the X3a or ACT carbon electrodes exhibited specific energy and power of ca. 30 Wh/kg and 10 kW/kg, respectively. The DTC7 carbon electrodes, featuring a capacitance response higher of 20%-40% than those of X3a and ACT, respectively, enabled the development of a PYR14TFSI-based AEDLC with specific energy and power of 47 Wh/kg and 13 kW/kg at 60°C with Vmax of 3.9 V. Given the availability of the ACT carbon (obtained from a commercial material), the PYR1(2O1)TFSI-based AEDLCs assembled with ACT carbon electrodes were selected within the EU ILHYPOS project for the development of large-size prototypes. This study demonstrated that PYR1(2O1)TFSI-based AEDLC can operate between -30°C and +60°C and its cycling stability was proved at 60°C up to 27,000 cycles with high Vmax up to 3.8 V. Such AEDLC was further investigated following USABC and DOE FreedomCAR reference protocols for HEV to evaluate its dynamic pulse-power and energy features. It was demonstrated that with Vmax of 3.7 V at T> 30 °C the challenging energy and power targets stated by DOE for power-assist HEVs, and at T> 0 °C the standards for the 12V-TSS and 42V-FSS and TPA 2s-pulse applications are satisfied, if the ratio wmodule/wSC = 2 is accomplished, which, however, is a very demanding condition. Finally, suggestions for further advances in IL-based AEDLC performance were found. Particularly, given that the main contribution to the ESR is the electrode charging resistance, which in turn is affected by the ionic resistance in the pores that is also modulated by pore length, the pore geometry is a key parameter in carbon design not only because it defines the carbon surface but also because it can differentially “amplify” the effect of IL conductivity on the electrode charging-discharging process and, thus, supercapacitor time constant.

Recombinant expression of molluscan hemocyanin (KLH) substructures in a prokaryotic system: E. coli

The recombinant expression of 19 different substructures of KLH in the prokaryotic sys-tem E. coli has been successfully achieved: each one of the eight single FUs a to h of both isoforms, KLH1 and KLH2, two substructures consisting of two consecutive FUs (KLH1-bc and KLH1-gh) as well as a cDNA encompassing KLH1-abc. All recombinant proteins, fused to an N-terminal 6xHis tag, have successfully been detected by immuno precipitation using monoclonal α-His-antibodies and polyclonal α-KLH1- and α-KLH2-antibodies. One exception remained: SP-KLH2-a, which was not detected by the α-His-antibodies. This allows speculations as to whether the coexpressed signal peptide can lead, at one hand, to the secretion of the recombinant protein, and on the other to the simultaneous cut-off of the leader peptide, which results in the splitting off of even more N-terminal 6xHis tag, leading to failed recognition by the appropriate antibodies. The comparison of native KLH with recombinantly expressed prokaryotic (E. coli) and eukaryotic (Sf9 insect cells) KLH was done using FU-1h. The weak detection by the polyclonal α-KLH1-antibodies of both recombinantly expressed proteins showed that the native protein was the best recognized. For the prokaryotic one, both the denaturation applied for solubilisation of the bacterial inclusion bodies and the inability of bacterial cells to add N-linked glycosylation, are the reason for the poor hybridization. In contrast, KLH1-h expressed in eukaryotic insect cells is likely to be glycosylated. The incubation with the α-KLH1-antibodies resulting in the same weak detection, however, revealed that the linked carbohydrate side chains are not those expected. The establishment of SOE-PCR, together with further improvement, has enabled the generation of a clone encompassing the complete subunit KLH1-abcdefgh. The se-quence analysis compared to the original KLH1 sequence showed, however, that the resulting recombinant protein is defective in two histidines, required for the copper bind-ing sites in FU-1b and FU-1d and in three disulfide bridges (FU-1a, FU-1b and FU 1g). This is due to polymerase-related nucleotide exchanges, resulting in a changed amino acid sequence. Nevertheless, all eight potential N-glycosylation sites are present, leading to the speculation that the recombinant protein can in theory be fully glycosylated, which is the most important aspect for the clinical applicability of recombinant KLH as an im-munotherapeutic agent. The improvement of this method elaborated during the present work indicates bright prospects for the future generation of a correct cDNA sequence encoding for the complete KLH2 subunit.

Petrogenesis of dunite, wehrlite and websterite xenoliths from Kimberley, South Africa: Origin as mantle peridotites of cumulates

Dunite, wehrlite and websterite xenoliths occur amongst a large abundance of mantle xenoliths in kimberlites of the Kimberley cluster in South Africa. Up to know they have mostly been neglected. On the basis of texture, major and trace elements, oxygen isotopes as well as Re-Os isotope characteristics, they can be subdivided into two groups. A coarse-grained mantle peridotite group, comprising dunite, wehrlite and websterite xenoliths, that are similar to fertile peridotites and represent upper mantle assemblages that are differently influenced by mantle metasomatism. And a cumulate group, containing fine-grained Fe-rich dunite xenoliths that represent cumulates of flood basalt magmatism related to ~183 Ma Karoo and ~2.7 Ga Ventersdorp events in southern Africa. Dunite, wehrlite and websterite xenoliths have preserved a complex history of melt depletion and metasomatic re-enrichment events, which gives information about the different re-enrichment stages of the subcratonic lithospheric mantle and the spatial differences within the Kaapvaal craton upper mantle. Websterite xenoliths comprise orthopyroxene (40-85 Vol. %), clinopyroxene (5-42 Vol. %), garnet (4-10 Vol. %) and subordinately olivine, while dunite and wehrlite xenoliths contain predominantly olivine (65-100 Vol %) and subordinately orthopyroxene, clinopyroxene and garnet. High melt depletion and a dunitic to harzburgitic protolith composition are reflected by high forsterite (Fo90-92) and high olivine NiO contents (2800-5000 ppm) and high orthopyroxene Mg# (Mg/(Mg+Fe)) of 0.91-0.93. Re-depletion ages of predominantly 2.9 Ga reflect a minimum age of melt depletion. Melt depletion ceased in conjunction with collision of the Kimberley block with the Witwatersrand block ~2.9 Ga ago. Subduction related re-fertilisation of the previously depleted mantle xenoliths is documented by i) amoeboid textured orthopyroxene, clinopyroxene and garnet, which crystallized in schlieren along olivine grain boundaries, ii) high whole-rock SiO2, Al2O3, CaO, TiO2, FeO contents, iii) low oxygen isotope ratios in clinopyroxene and garnet of 4.8-5.4 ‰ and 4.7-5.3 ‰, respectively and iv) trace element compositions of wehrlitic clinopyroxene and garnet in equilibrium with high-pressure partial melts of eclogite. Trace element disequilibrium of orthopyroxene with clinopyroxene and garnet indicates a separate origin for orthopyroxene, on one side as primary mantle orthopyroxene in dunite and wehrlite xenoliths and on the other side as reaction product with Si-rich melts produced by partial melting of eclogite. This reaction triggered replacement of olivine by orthopyroxene in the surrounding mantle and produced the typical Si-rich composition of Kaapvaal mantle peridotites. Partial melting of eclogite at higher temperatures produced a second metasomatic melt with lower SiO2, but higher Al2O3, CaO, FeO, Ti, Zr, Hf and a low oxygen isotope ratio. This melt triggered clinopyroxene and locally garnet and rutile crystallization in percolation veins, replacing olivine and orthopyroxene in the Kaapvaal upper mantle. Additionally, websterite xenoliths have experienced late stage cryptic metasomatism by the host kimberlite melt, changing the trace element composition of clinopyroxene, orthopyroxene and garnet to different extent. Hence websterite and most fertile lherzolite xenoliths have experienced three metasomatic events: i) reaction with high-Si melt, ii) percolation of subduction related silica melt with lower SiO2 content and iii) cryptic metasomatism by kimberlite. In contrast, dunite and wehrlite xenoliths have only experienced the second metasomatic event. They represent mantle lithologies further away from metasomatising agents. The Fe-rich dunites comprise olivine neoblasts with subordinate olivine porphyroclasts and parallel-orientated needles of ilmenite, which may enclose spinel. The lower forsterite and NiO contents of olivine in Fe-rich dunites compared to mantle peridotite xenoliths (Fo87-89 vs. Fo93-95 and 1300-2800ppm vs. 2200-3900 ppm, respectively), rules out a restitic origin. Cr-rich spinels are remnants of the original cumulate mineralogy that survived a late stage metasomatic overprint related to the production of the host kimberlite, producing ilmenite and phlogopite in some samples. Olivine porphyroclasts and neoblasts have different trace element compositions, the latter having high Ti, V, Cr and Ni and low Zn, Zr and Nb contents, indicating contrasting origins for neoblasts and porphyroclasts. The dunites have high 187Os/188Os ratios (0.11-0.15) indicating young (Phanerozoic) model ages for most samples, whereas three samples show isotopic mixtures between Phanerozoic neoblasts and ancient porphyroclastic material. Most Fe-rich dunite xenoliths can be interpreted as cumulates of fractional crystallization of Karoo magmatism, whereas the porphyroclasts are interpreted to be remnants from the much earlier Archaean Ventersdorp magmatism.

Die Entwicklung der Mesofauna eines Weinberges im nordöstlichen Rheinhessen im Vergleich zum Lennebergwald und weiteren Agrarflächen

ZusammenfassungrnrnrnDer Köderstreifentest, die Auswertung der Minicontainer und die Erfassung der Bodenlebewesen mit Hilfe der Bodenstechkerne ergeben zusammen eine gut standardisierte Methode zur Darstellung und Beurteilung der Mesofauna. Unter der Vorraussetzung gleicher abiotischer Faktoren ist es problemlos möglich, selbst unterschiedliche Standorte wie Agrarflächen, Weinberge und Waldböden vergleichend zu untersuchen.rnrnAuf den verschiedenen Versuchsflächen des Laubenheimer Weinberges gelingt es deutlich zu zeigen, wie wichtig eine naturnahe Begrünung für den Boden ist. Dies betrifft nicht nur die Entwicklung der Humusschicht und damit die Bodenlebewesen, sondern auch die Schaffung von Kapillaren und Poren, die durch schwere landwirtschaftliche Geräte im Rahmen der Bo-denverdichtung reduziert werden. Erosionserscheinungen kommen vollständig zum Stillstand. Das Ökosystem Boden sollte auch so gut wie keine Belastung durch Herbizide, Insektizide und Pestizide erfahren. Ähnliches gilt auch für agrarisch genutzte Flächen. rnrnDer Lennebergwald als Naherholungsregion von Mainz ist besonders schützenswert, da dieser durch intensiven Immissionseintrag aufgrund der Nähe zu den Autobahnen und durch die Eutrophierung über die Haustiere stark belastet wird. Die immer größere Ausdehnung des Siedlungsgebietes und die damit verbundene steigende Anzahl an Waldbesuchern, die durch Verlassen der vorgegebenen Wege den Boden zerstören, gefährden zusätzlich das Ökosystem.rnrnÜber Sinn und Zweck einer Flurbereinigung zu diskutieren ist hier nicht angebracht. Aus bo-denkundlicher Sicht ist sie nicht zu befürworten, da hiermit alle bodenbewahrenden Maßnah-men ignoriert werden. Wichtig ist es, bei den Landwirten Aufklärungsarbeit zu leisten, was bodenschonende und bodenweiterentwickelnde Bearbeitungsmethoden bedeuten. Mit Hilfe sachgemäßer Aufklärung und richtiger Umsetzung kann durch Begrünungsmaßnahmen der zum Teil sehr stark strapazierte Boden erhalten, gefördert und auf lange Sicht stabilisiert wer-den.rnrnAufgrund der festgestellten Tatsachen wurde ab 2008 auf eine flächige Dauerbegrünung um-gestellt, so dass es auch in den unbegrünten Rebzeilen zu einer Bodenverbesserung kommen kann. Mit großer Wahrscheinlichkeit dürfte diese schneller voranschreiten, da die Mesofauna von den benachbarten begrünten Rebzeilen einwandern kann. rnDie Mesofauna landwirtschaftlich genutzter Flächen und Waldgebiete kann, obwohl extrem unterschiedlich, miteinander verglichen werden.rnrnBrachflächen und Waldgebiete lassen sich aufgrund der unberührten Bodenstrukturen sogar gut miteinander vergleichen. Temperatur- und Niederschlagsverhältnisse müssen dabei über-einstimmen. Die Azidität der jeweiligen Böden gilt es zu berücksichtigen, da verschiedene Tiergruppen damit unterschiedlich umgehen. Collembolen bevorzugen neutrale Böden, wäh-rend Acari als Räuber mit den Lebewesen in sauren Böden besser zurechtkommen. Die Streu-auflage ist dabei von großer Bedeutung.rnrnIm Rahmen von Bearbeitungsmaßnahmen kommt es durch jeglichen Maschineneinsatz zu ei-ner mehr oder weniger starken Veränderung der Bodenstruktur und somit auch der darin le-benden Mesofauna. Bis sich diese erholt hat, steht meist schon die nächste Bodenbewirtschaf-tung an. Die Bodenverdichtung spielt auch eine Rolle. Bei herkömmlichem Ackerbau ist eine Fruchtfolge mit eingeschalteter Brache oder Gründüngung mit Klee oder Luzerne angebracht, um die Mesofauna nicht zu stark zu strapazieren. Organische Düngegaben leicht abbaubarer Streu sind deutlich zu bevorzugen gegenüber sehr zellulose- und ligninhaltigen Pflanzenresten. Die Einbringung von Stoppeln nach Aberntung von Getreidefeldern ist sinnvoll, solange dabei nicht zu tief in die Bodenstruktur eingegriffen wird (ZIMMER 1997).rnrnIm Rahmen der Sonderkultur Wein, bei der eine Bodenbearbeitung aus den aufgezeigten Gründen eigentlich nicht notwendig wäre, sind Dauerbegrünungsmaßnahmen generell von Nutzen: der Erosion wird vorgebeugt, die Bodenfeuchte konstant gehalten, der anfallende Mulch als Gründüngung genutzt. Dies sind alles entscheidende Faktoren, die die Meso- und Makrofauna fördern. Nur die Bodenverdichtung durch schweres Gerät, wie Schlepper und Vollernter, sind für den Boden nicht förderlich (HEISLER 1993, EHRENSBERGER 1993). Nie-derdruckreifen und Verringerung der Befahrung sind geeignete Gegenmaßnahmen. rnrnEntgegen landläufiger Winzermeinung, stellen die Pflanzen einer Begrünung eigentlich keine Konkurrenz für die Weinstöcke dar. Die Vorteile einer Begrünung sind nicht nur die Förde-rung der einheimischen Flora in ihrem standortgerechten Artenreichtum, sondern auch Ver-vielfältigung von Meso- und Makrofauna aufgrund der dadurch mehr anfallenden und ein-zuarbeitenden leicht abbaubaren Streu (GRIEBEL 1995).rn

Advanced lithium battery chemistries for sustainable transportation

The specific energy of lithium-ion batteries (LIBs) is today 200 Wh/kg, a value not sufficient to power fully electric vehicles with a driving range of 400 km which requires a battery pack of 90 kWh. To deliver such energy the battery weight should be higher than 400 kg and the corresponding increase of vehicle mass would narrow the driving range to 280 km. Two main strategies are pursued to improve the energy of the rechargeable lithium batteries up to the transportation targets. The first is the increase of LIBs working voltage by using high-voltage cathode materials. The second is the increase of battery capacity by the development of a cell chemistry where oxygen redox reaction (ORR) occurs at the cathode and metal lithium is the anode (Li/O2 battery). This PhD work is focused on the development of high-voltage safe cathodes for LIBs, and on the investigation of the feasibility of Li/O2 battery operating with ionic liquid(IL)-based electrolytes. The use of LiMn1-xFexPO4 as high-voltage cathode material is discussed. Synthesis and electrochemical tests of three different phosphates, more safe cathode materials than transition metal oxides, are reported. The feasibility of Li/O2 battery operating in IL-based electrolytes is also discussed. Three aspects have been investigated: basic aspects of ORR, synthesis and characterization of porous carbons as positive electrode materials and study of limiting factors to the electrode capacity and cycle-life. Regarding LIBs, the findings on LiMnPO4 prepared by soluble precursors demonstrate that a good performing Mn-based olivine is viable without the coexistence of iron. Regarding Li/O2 battery, the oxygen diffusion coefficient and concentration values in different ILs were obtained. This work highlighted that the O2 mass transport limits the Li/O2 capacity at high currents; it gave indications on how to increase battery capacity by using a flow-cell and a porous carbon as cathode.

Physiologie eines erlernten Körpermodells in Drosophila melanogaster

In der vorliegenden Dissertation wird ein Körpergrößengedächtnis untersucht. Es wird dargestellt, wie diese Information über die Reichweite der Fliege beim Lückenklettern unter kotrollierten Umweltbedingungen erworben und prozessiert wird. Zusätzlich wird geklärt, welche biochemischen Signale benötigt werden, um daraus ein lang anhalten-des Gedächtnis zu formen. Adulte Fliegen sind in der Lage, ihre Körperreichweite zu lernen. Naive Fliegen, die in der Dunkelheit gehalten wurden, versuchen erfolglos, zu breite Lücken zu überqueren, während visuell erfahrene Fliegen die Kletterversuche an ihre Körpergröße anpassen. Erfahrene kleine Fliegen scheinen Kenntnis ihres Nachteils zu haben. Sie kehren an Lückenbreiten um, welche ihre größeren Artgenos-sen durchaus noch versuchen. Die Taufliegen lernen die größenabhängige Reichweite über die visuelle Rückmeldung während des Laufens (aus Parallaxenbewegung). Da-bei reichen 15 min in strukturierter, heller Umgebung aus. Es gibt keinen festgelegten Beginn der sensiblen Phase. Nach 2 h ist das Gedächtnis jedoch konsolidiert und kann durch Stress nicht mehr zerstört oder durch sensorische Eingänge verändert werden. Dunkel aufgezogene Fliegen wurden ausgewählten Streifenmustern mit spezifischen Raumfrequenzen ausgesetzt. Nur die Insekten, welche mit einem als „optimal“ klassi-fizierten Muster visuell stimuliert wurden, sind in der Lage, die Körperreichweite einzu-schätzen, indem die durchschnittliche Schrittlänge in Verbindung mit der visuellen Wahrnehmung gebracht wird. Überraschenderweise ist es sogar mittels partieller Kompensation der Parallaxen möglich, naive Fliegen so zu trainieren, dass sie sich wie kleinere Exemplare verhalten. Da die Experimente ein Erlernen der Körperreich-weite vermuten lassen, wurden lernmutante Stämme beim Lückenüberwinden getes-tet. Sowohl die Ergebnisse von rut1- und dnc1-Mutanten, als auch das defizitäre Klet-tern von oc1-Fliegen ließ eine Beteiligung der cAMP-abhängigen Lernkaskade in der Protocerebralbrücke (PB) vermuten. Rettungsexperimente der rut1- und dnc1-Hinter-gründe kartierten das Gedächtnis in unterschiedliche Neuronengruppen der PB, wel-che auch für die visuelle Ausrichtung des Kletterns benötigt werden. Erstaunlicher-weise haben laterale lokale PB-Neurone und PFN-Neurone (Projektion von der PB über den fächerförmigen Körper zu den Noduli) verschiedene Erfordernisse für cAMP-Signale. Zusammenfassend weisen die Ergebnisse darauf hin, dass hohe Mengen an cAMP/PKA-Signalen in den latero-lateralen Elementen der PB benötigt werden, wäh-rend kolumnäre PFN-Neurone geringe oder keine Mengen an cAMP/PKA erfordern. Das Körperreichweitengedächtnis ist vermutlich das am längsten andauernde Ge-dächtnis in Drosophila. Wenn es erst einmal konsolidiert ist hält es länger als drei Wo-chen.rnAußerdem kann die Fruchtliege Drosophila melanogaster trainiert werden, die kom-plexe motorische Aufgabe des Lückenkletterns zu optimieren. Die trainierten Fliegen werden erfolgreicher und schneller beim Überqueren von Lücken, welche größer sind als sie selbst. Dabei existiert eine Kurzeitkomponente (STM), die 40 min nach dem ersten Training anhält. Nach weiteren vier Trainingsdurchläufen im Abstand von 20 min wird ein Langzeitgedächtnis (LTM) zum Folgetag geformt. Analysen mit Mutati-onslinien wiesen eine Beteiligung der cAMP-abhängigen Lernkaskade an dieser Ge-dächtnisform auf. Rettungsexperimente des rut2080-Hintergrunds kartierten sowohl das STM, als auch das LTM in PFN-Neuronen. Das STM kann aber ebenso in den alpha- und beta- Loben der Pilzkörper gerettet werden.rnLetztendlich sind wildtypische Fliegen sogar in der Lage, sich an einen Verlust eines Mittelbeintarsuses und dem einhergehenden Fehlen des Adhäsionsorgans am Tarsusende anzupassen. Das Klettern wird zwar sofort schlechter, erholt sich aber bis zum Folgetag wieder auf ein normales Niveau. Dieser neue Zustand erfordert ein Ge-dächtnis für die physischen Möglichkeiten, die nur durch plastische Veränderungen im Nervensystem des Insekts erreicht werden können.

Dispositivi di filtrazione del particolato nei fumi di combustione di biomassa in caldaie di piccola dimensione

Progettazione, realizzazione e sperimentazione di un filtro per il particolato da piccole caldaie a biomassa, che deve avere efficienza maggiore del 99,9% e consumi energetici specifici minori di 10 Wh/Nm3.