Key influences on motivations for utility cycling (cycling for transport to and from places)

Issue addressed: Although increases in cycling in Brisbane are encouraging, bicycle mode share to work in the state of Queensland remains low. The aim of this qualitative study was to draw upon the lived experiences of Queensland cyclists to understand the main motivators for utility cycling (cycling as a means to get to and from places) and compare motivators between utility cyclists (those who cycle for utility as well as for recreation) and non-utility cyclists (those who cycle only for recreation). Methods: For an online survey, members of a bicycle group (831 utility cyclists and 931 non-utility cyclists, aged 18-90 years) were asked to describe, unprompted, what would motivate them to engage in utility cycling (more often). Responses were coded into themes within four levels of an ecological model. Results: Within an ecological model, built environment influences on motivation were grouped according to whether they related to appeal (safety), convenience (accessibility) or attractiveness (more amenities) and included adequate infrastructure for short trips, bikeway connectivity, end-of-trip facilities at public locations and easy and safe bicycle access to destinations outside of cities. A key social-cultural influence related to improved interactions among different road users. Conclusions: The built and social-cultural environments need to be more supportive of utility cycling before even current utility and non-utility cyclists will be motivated to engage (more often) in utility cycling. So what?: Additional government strategies and more and better infrastructure that support utility cycling beyond commuter cycling may encourage a utility cycling culture.

Traffic safety risks trends and patterns analysis on motorways

Crashes that occur on motorways contribute to a significant proportion (40-50%) of non-recurrent motorway congestion. Hence, reducing the frequency of crashes assist in addressing congestion issues (Meyer, 2008). Analysing traffic conditions and discovering risky traffic trends and patterns are essential basics in crash likelihood estimations studies and still require more attention and investigation. In this paper we will show, through data mining techniques, that there is a relationship between pre-crash traffic flow patterns and crash occurrence on motorways, compare them with normal traffic trends, and that this knowledge has the potentiality to improve the accuracy of existing crash likelihood estimation models, and opens the path for new development approaches. The data for the analysis was extracted from records collected between 2007 and 2009 on the Shibuya and Shinjuku lines of the Tokyo Metropolitan Expressway in Japan. The dataset includes a total of 824 rear-end and sideswipe crashes that have been matched with crashes corresponding traffic flow data using an incident detection algorithm. Traffic trends (traffic speed time series) revealed that crashes can be clustered with regards to the dominant traffic patterns prior to the crash occurrence. K-Means clustering algorithm applied to determine dominant pre-crash traffic patterns. In the first phase of this research, traffic regimes identified by analysing crashes and normal traffic situations using half an hour speed in upstream locations of crashes. Then, the second phase investigated the different combination of speed risk indicators to distinguish crashes from normal traffic situations more precisely. Five major trends have been found in the first phase of this paper for both high risk and normal conditions. The study discovered traffic regimes had differences in the speed trends. Moreover, the second phase explains that spatiotemporal difference of speed is a better risk indicator among different combinations of speed related risk indicators. Based on these findings, crash likelihood estimation models can be fine-tuned to increase accuracy of estimations and minimize false alarms.

End-of-life care pathways for improving outcomes in caring for the dying (Review)

Background This is an updated version of a Cochrane review first published in Issue 1, 2010 of The Cochrane Library. In many clinical areas, integrated care pathways are utilised as structured multidisciplinary care plans that detail essential steps in caring for patients with specific clinical problems. In particular, care pathways for the dying have been developed as a model to improve care of patients who are in the last days of life. The care pathways were designed with an aim of ensuring that the most appropriate management occurs at the most appropriate time and that it is provided by the most appropriate health professional. There have been sustained concerns about the safety of implementing end-of-life care pathways, particularly in the UK. Therefore, there is a significant need for clinicians and policy makers to be informed about the effects of end-of-life care pathways with a systematic review. Objectives To assess the effects of end-of-life care pathways, compared with usual care (no pathway) or with care guided by another end-of-life care pathway across all healthcare settings (e.g. hospitals, residential aged care facilities, community). In particular, we aimed to assess the effects on symptom severity and quality of life of people who are dying; those related to the care such as families, carers and health professionals; or a combination of these. Search Methods We searched the Cochrane Central Register of Controlled Trials (CENTRAL) (Issue 6, 2013), MEDLINE, EMBASE, PsycINFO, CINAHL, review articles and reference lists of relevant articles.We conducted the original search in September 2009, and the updated search in June 2013. Selection Criteria All randomised controlled trials (RCTs), quasi-randomised trial or high-quality controlled before-and-after studies comparing use versus non-use of an end-of-life care pathway in caring for the dying. Data Collection and Analysis Two review authors assessed the results of the searches against the predetermined criteria for inclusion. Main Results The original review identified 920 titles. The updated search found 2042 potentially relevant titles (including the original 920), but no additional studies met criteria for inclusion in the review update. Authors’ Conclusions With sustained concerns about the safety of the pathway implementation and the lack of available evidence on important patient and relative outcomes, recommendations for the use of end-of-life pathways in caring for the dying cannot be made. Since the last version of this review, no new studies met criteria for inclusion in the review update. With recently documented concerns related to the potential adverse effects associated with Liverpool Care Pathway (the most commonly used end-of-life care pathway), we do not recommend decision making based on indirect or low-quality evidence. All health services using end-of-life care pathways are encouraged to have their use of the pathway, to date, independently audited. Any subsequent use should be based on carefully documented evaluations. Large RCTs or other well-designed controlled studies are urgently required for the evaluation of the use of end-of-life care pathways in caring for dying people in various clinical settings. In future studies, outcome measures should include benefits or harms concerning the outcomes of interest in this review in relation to patients, families, carers and health professionals.

Visibility-related characteristics of crashes involving bicyclists and motor vehicles – Responses from an online questionnaire study

Bicyclists are among the most vulnerable of road users, with high fatal crash rates. Although visibility aids have been widely advocated to help prevent bicycle-vehicle conflicts, to date no study has investigated, among crash-involved cyclists, the kind of visibility aids they were using at the time of the crash. This study undertook a detailed investigation of visibility factors involved in bicyclist-motor-vehicle crashes. We surveyed 184 bicyclists (predominantly from Australia via internet cycling forums) who had been involved in motor vehicle collisions regarding the perceived cause of the collision, ambient weather and general visibility, as well as the clothing and bicycle lights used by the bicyclist. Over a third of the crashes occurred in low light levels (dawn, dusk or night-time), which is disproportionate given that only a small proportion of bicyclists typically ride at these times. Importantly, 19% of these bicyclists reported not using bicycle lights at the time of the crash, and only 34% were wearing reflective clothing. Only two participants (of 184) nominated bicyclist visibility as the cause of the crash: 61% attributed the crash to driver inattention. These findings demonstrate that crash-involved bicyclists tend to under-rate and under-utilise visibility aids as a means of improving their safety.

Ergonomic DHM systems - limitations and trends – a systematic literature review focused on the ‘future of ergonomics’

Digital Human Models (DHM) have been used for over 25 years. They have evolved from simple drawing templates, which are nowadays still used in architecture, to complex and Computer Aided Engineering (CAE) integrated design and analysis tools for various ergonomic tasks. DHM are most frequently used for applications in product design and production planning, with many successful implementations documented. DHM from other domains, as for example computer user interfaces, artificial intelligence, training and education, or the entertainment industry show that there is also an ongoing development towards a comprehensive understanding and holistic modeling of human behavior. While the development of DHM for the game sector has seen significant progress in recent years, advances of DHM in the area of ergonomics have been comparatively modest. As a consequence, we need to question if current DHM systems are fit for the design of future mobile work systems. So far it appears that DHM in Ergonomics are rather limited to some traditional applications. According to Dul et al. (2012), future characteristics of Human Factors and Ergonomics (HFE) can be assigned to six main trends: (1) global change of work systems, (2) cultural diversity, (3) ageing, (4) information and communication technology (ICT), (5) enhanced competiveness and the need for innovation, and; (6) sustainability and corporate social responsibility. Based on a literature review, we systematically investigate the capabilities of current ergonomic DHM systems versus the ‘Future of Ergonomics’ requirements. It is found that DHMs already provide broad functionality in support of trends (1) and (2), and more limited options in regards to trend (3). Today’s DHM provide access to a broad range of national and international databases for correct differentiation and characterization of anthropometry for global populations. Some DHM explicitly address social and cultural modeling of groups of people. In comparison, the trends of growing importance of ICT (4), the need for innovation (5) and sustainability (6) are addressed primarily from a hardware-oriented and engineering perspective and not reflected in DHM. This reflects a persistent separation between hardware design (engineering) and software design (information technology) in the view of DHM – a disconnection which needs to be urgently overcome in the era of software defined user interfaces and mobile devices. The design of a mobile ICT-device is discussed to exemplify the need for a comprehensive future DHM solution. Designing such mobile devices requires an approach that includes organizational aspects as well as technical and cognitive ergonomics. Multiple interrelationships between the different aspects result in a challenging setting for future DHM. In conclusion, the ‘Future of Ergonomics’ pose particular challenges for DHM in regards to the design of mobile work systems, and moreover mobile information access.

Comparison of Motorists’ and Cyclists’ perception of bicycle safety

Increasing the modal share of public transit systems has become paramount in aiding the reduction on the excessive reliance of personal motor vehicles. More so the need to increase the share of active modes of transport such as the use of bicycles, therefore there is an ever increasing need to use bicycles both on shared pedestrian paths and on-road cycling. The risk to cyclist, or consequently the perception of the risk from both cyclists and motorists alike, is an important factor to increase the use of this transport mode. This paper investigates perception of bicycle safety by conducting a survey and analysing the survey data to understand how participants with different backgrounds perceive the risks of cycling for transport. Contributing factors to people’s perception of bicycle safety were identified and compared across different road user groups, based upon which recommendations were made on how to improve bicycle safety.

The safety profile of perflutren microsphere contrast echocardiography during rest and stress imaging : results from an Australian multicentre cohort

Background Contrast enhanced echocardiography (CEE) is utilised when sub-optimal image quality results in non-diagnostic echocardiograms. However, there have been numerous safety notices issued by regulatory authorities regarding rare but potentially serious adverse reactions (AR). This multi-centre, retrospective analysis was performed to assess the short-term safety of CEE in a broad range of indications. Methods All CEE performed over 58 months at three institutions were assessed for AR within 30 min. Results A total of 5956 CEE were performed in 5576 patients. A total of 4903 were stress CEE and 1053 resting CCE.Bolus administration in 5719, infusion in 237 cases; 89.9% of CCE were outpatients. Commonest CEE indication was functional stress testing (82.3%). There were 16 AR related to CEE (0.27%). All AR were mild, transient and all patients made a full recovery. No cases of serious anaphylaxis or death within 30 min of contrast administration. Comparing those with and without an AR, there were no significant differences in age, gender, BMI, LVEF, patient location, exam type or RVSP. There was a slightly increased likelihood of an AR during infusion versus bolus dosing (p = 0.02). Conclusion CEE is a safe investigation in a broad range of indications and clinical scenarios. AR are very rare, mild and transient.

A novel method for quantifying the criticality and vulnerability of the components of railway bridges

Conditions of bridges deteriorate with age, due to different critical factors including, changes in loading, fatigue, environmental effects and natural events. In order to rate a network of bridges, based on their structural condition, the condition of the components of a bridge and their effects on behaviour of the bridge should be reliably estimated. In this paper, a new method for quantifying the criticality and vulnerability of the components of the railway bridges in a network will be introduced. The type of structural analyses for identifying the criticality of the components for carrying train loads will be determined. In addition to that, the analytical methods for identifying the vulnerability of the components to natural events whose probability of occurrence is important, such as, flood, wind, earthquake and collision will be determined. In order to maintain the practicality of this method to be applied to a network of thousands of railway bridges, the simplicity of structural analysis has been taken into account. Demand by capacity ratios of the components at both safety and serviceability condition states as well as weighting factors used in current bridge management systems (BMS) are taken into consideration. It will be explained what types of information related to the structural condition of a bridge is required to be obtained, recorded and analysed. The authors of this paper will use this method in a new rating system introduced previously. Enhancing accuracy and reliability of evaluating and predicting the vulnerability of railway bridges to environmental effects and natural events will be the significant achievement of this research.

Safety at railway level crossings : driver acceptance of potential ITS interventions

There is a continuing need to improve safety at Railway Level Crossings (RLX) particularly those that do not have gates and lights regulating traffic flow. A number of Intelligent Transport System (ITS) interventions have been proposed to improve drivers’ awareness and reduce errors in detecting and responding appropriately at level crossings. However, as with other technologies, successful implementation and ultimately effectiveness rests with the acceptance of the technology by the end user. In the current research, four focus groups were held (n=38) with drivers in metropolitan and regional locations in Queensland to examine their perceptions of potential in-vehicle and road-based ITS interventions to improve safety at RLX. The findings imply that further development of the ITS interventions, in particular the design and related promotion of the final product, must consider ease of use, usefulness and relative cost.

Utilising hospital data to inform product safety prioritisation : the application of RAPEX severity rankings in ICD-coded burn data

Background The implementation of the Australian Consumer Law in 2011 highlighted the need for better use of injury data to improve the effectiveness and responsiveness of product safety (PS) initiatives. In the PS system, resources are allocated to different priority issues using risk assessment tools. The rapid exchange of information (RAPEX) tool to prioritise hazards, developed by the European Commission, is currently being adopted in Australia. Injury data is required as a basic input to the RAPEX tool in the risk assessment process. One of the challenges in utilising injury data in the PS system is the complexity of translating detailed clinical coded data into broad categories such as those used in the RAPEX tool. Aims This study aims to translate hospital burns data into a simplified format by mapping the International Statistical Classification of Disease and Related Health Problems (Tenth Revision) Australian Modification (ICD-10-AM) burn codes into RAPEX severity rankings, using these rankings to identify priority areas in childhood product-related burns data. Methods ICD-10-AM burn codes were mapped into four levels of severity using the RAPEX guide table by assigning rankings from 1-4, in order of increasing severity. RAPEX rankings were determined by the thickness and surface area of the burn (BSA) with information extracted from the fourth character of T20-T30 codes for burn thickness, and the fourth and fifth characters of T31 codes for the BSA. Following the mapping process, secondary data analysis of 2008-2010 Queensland Hospital Admitted Patient Data Collection (QHAPDC) paediatric data was conducted to identify priority areas in product-related burns. Results The application of RAPEX rankings in QHAPDC burn data showed approximately 70% of paediatric burns in Queensland hospitals were categorised under RAPEX levels 1 and 2, 25% under RAPEX 3 and 4, with the remaining 5% unclassifiable. In the PS system, prioritisations are made to issues categorised under RAPEX levels 3 and 4. Analysis of external cause codes within these levels showed that flammable materials (for children aged 10-15yo) and hot substances (for children aged <2yo) were the most frequently identified products. Discussion and conclusions The mapping of ICD-10-AM burn codes into RAPEX rankings showed a favourable degree of compatibility between both classification systems, suggesting that ICD-10-AM coded burn data can be simplified to more effectively support PS initiatives. Additionally, the secondary data analysis showed that only 25% of all admitted burn cases in Queensland were severe enough to trigger a PS response.

Well-being, satisfaction and commitment : the substitutable nature of resources for maternity hospital nurses

Abstract Aims. To investigate the relationship between three types of organizational resources (job control, social support and organizational justice) and the impact of job demands on nurse’s well-being and attitudes towards their work. Background. The negative impact of work-related stress on nurse’s health and attitudes towards their work has been established. Increasingly, research is focusing on the role of organizational resources in reducing the impact of work related stress. Design. Cross-sectional survey. Method. Data collected in November 2008 from 226 Australian nurses and midwives were analysed using the full Job Strain Model with the addition of organizational justice variables. Multiple regression analyses explored the relationships among job control, job demands, three sources of social support and four types of organizational justice on well-being and work attitudes. Results. The overall regression models explained a significant amount of variance in well-being, job satisfaction and organizational commitment. Significant main effects were evident for support variables and organizational justice variables on well-being and job satisfaction. Interactions between job control and supervisor support and between job demands and supervisor support were evident for job satisfaction. Conclusions. Supervisor support and organizational justice have significant relationships with nurses’ well-being and job satisfaction. More broadly, the findings suggest that, in the triple-matching approach from a work-stressor to a resource to a work outcome, personal, supervisory and organizational resources may be substitutable. These findings provide nurse management with empirical endorsement for the development and delivery of the organization’s resources for nursing staff.

Road safety in Australia : successes, challenges for the future, and possibilities for the USA

Overview - Role of CARRS-Q - Australia’s road safety performance - Key features of Australia’s approach to road safety: - Strong reliance on traffic law enforcement, supported by mass media public education - Adoption of the Safe Systems approach - Ambitious road trauma reduction targets? - Ongoing challenges - Possibilities for the USA

Driver licensing experience of Korean Australians

Graduated licensing has been identified as the most promising approach to reducing the crash risk of novice drivers. However, research suggests that the effectiveness of graduated licensing appears to differ between urban and rural novice drivers and according to race or ethnicity. Extensive supervised driving practice as a learner driver is an important component of graduated licensing systems in Australia and many other countries. Earlier CARRS-Q research identified that falsification of logbooks was more common among particular demographic groups. The factors underlying this are not well understood. It is unclear whether this reflects a lack of understanding of the importance of supervised practice (given that it is not a licensing requirement in many countries of origin), or it reflects lack of access to vehicles and supervising drivers, or whether there is less respect for driver licensing requirements among some groups. It is possible that the importance of these factors may differ across ethnic groups, depending on socioeconomic factors and cultural attitudes to road safety. In an attempt to better understand these issues, this study presents some preliminary results of focus groups examining the experience of the Queensland Graduated Driver Licensing System by Korean-Australian novice drivers and their parents.

Comparing outcomes of a school based injury prevention intervention for low-medium risk adolescents with high-risk adoelscents

High-risk adolescents are shown to jeopardise their future social and health functioning as well as placing themselves and others at immediate risk of harm. The challenge of “reaching” high-risk adolescents, who are often marginalised, is considerable. There is a positive relationship between age and risk taking behaviors during adolescence. This study examines outcomes (alcohol use, transport risk behaviors, violence) of a school based intervention (SPIY) by comparing low-medium risk adolescents with high-risk adolescents over a six month period.