Use of physicochemical signatures to assess the sources of metals in urban road dust

Road deposited dust is a complex mixture of pollutants derived from a wide range of sources. Accurate identification of these sources is seminal for effective source-oriented control measures. A range of techniques such as enrichment factor analysis (EF), principal component analysis (PCA) and hierarchical cluster analysis (HCA) are available for identifying sources of complex mixtures. However, they have multiple deficiencies when applied individually. This study presents an approach for the effective utilisation of EF, PCA and HCA for source identification, so that their specific deficiencies on an individual basis are eliminated. EF analysis confirmed the non-soil origin of metals such as Na, Cu, Cd, Zn, Sn, K, Ca, Sb, Ba, Ti, Ni and Mo providing guidance in the identification of anthropogenic sources. PCA and HCA identified four sources, with soil and asphalt wear in combination being the most prominent sources. Other sources were tyre wear, brake wear and sea salt.

Observations of road safety behaviours and practices of motorcycle rickshaw drivers in Lahore, Pakistan

Motorcycle Rickshaws (MRs) are an informal paratransit mode in Pakistan. They are locally manufactured and very popular but there are concerns about their crash involvement and overall safety. The first study of the current PhD program revealed that rickshaws (both MRs and auto-rickshaws) were involved in 51,992 road crashes attended by emergency ambulances in Punjab province, Pakistan between 2011-2013. This study aims to examine the road safety behaviours and practices of Motorcycle Rickshaw Drivers (MRDs) that may be contributing to these crashes. MRDs were observed at 12 major signalised intersections in Lahore. Vehicle characteristics and driver behaviours were recorded using a paper-based survey between 9am-7pm for a full week in May 2015. Of the 500 MRDs observed, about 23.4% appeared to be younger than the minimum driver licensing age of 18 years. More than half (52.6%) of the MRDs entered on the red light and 17.4% crossed when the signal was turning from yellow to green or red. MR traffic conflicts were observed in 62.8% of cases and one crash and 15 near-miss crashes were witnessed. Additionally, about half of MRs were overloaded, no MRD wore a helmet, and 3.8% were using a mobile phone while driving. This study provides the first scientific evidence to substantiate public concerns regarding the safety of MRs. It demonstrates that about a quarter of MRDs are underage,almost half of MRs are overloaded and more than half disobey traffic signals. This research could inform authorities to manage MR related transport and road safety issues.

Influence of road traffic environment and mobile phone distraction on the speed selection behaviour of young drivers

Travel speed is one of the most critical parameters for road safety; the evidence suggests that increased vehicle speed is associated with higher crash risk and injury severity. Both naturalistic and simulator studies have reported that drivers distracted by a mobile phone select a lower driving speed. Speed decrements have been argued to be a risk compensatory behaviour of distracted drivers. Nonetheless, the extent and circumstances of the speed change among distracted drivers are still not known very well. As such, the primary objective of this study was to investigate patterns of speed variation in relation to contextual factors and distraction. Using the CARRS-Q high-fidelity Advanced Driving Simulator, the speed selection behaviour of 32 drivers aged 18-26 years was examined in two phone conditions: baseline (no phone conversation) and handheld phone operation. The simulator driving route contained five different types of road traffic complexities, including one road section with a horizontal S curve, one horizontal S curve with adjacent traffic, one straight segment of suburban road without traffic, one straight segment of suburban road with traffic interactions, and one road segment in a city environment. Speed deviations from the posted speed limit were analysed using Ward’s Hierarchical Clustering method to identify the effects of road traffic environment and cognitive distraction. The speed deviations along curved road sections formed two different clusters for the two phone conditions, implying that distracted drivers adopt a different strategy for selecting driving speed in a complex driving situation. In particular, distracted drivers selected a lower speed while driving along a horizontal curve. The speed deviation along the city road segment and other straight road segments grouped into a different cluster, and the deviations were not significantly different across phone conditions, suggesting a negligible effect of distraction on speed selection along these road sections. Future research should focus on developing a risk compensation model to explain the relationship between road traffic complexity and distraction.

Cardiovascular diseases and vulnerable plaques: data, modeling, predictions and clinical applications PREFACE

Introduction Two symposia on “cardiovascular diseases and vulnerable plaques” Cardiovascular disease (CVD) is the leading cause of death worldwide. Huge effort has been made in many disciplines including medical imaging, computational modeling, bio- mechanics, bioengineering, medical devices, animal and clinical studies, population studies as well as genomic, molecular, cellular and organ-level studies seeking improved methods for early detection, diagnosis, prevention and treatment of these diseases [1-14]. However, the mechanisms governing the initiation, progression and the occurrence of final acute clinical CVD events are still poorly understood. A large number of victims of these dis- eases who are apparently healthy die suddenly without prior symptoms. Available screening and diagnostic methods are insufficient to identify the victims before the event occurs [8,9]. Most cardiovascular diseases are associated with vulnerable plaques. A grand challenge here is to develop new imaging techniques, predictive methods and patient screening tools to identify vulnerable plaques and patients who are more vulnerable to plaque rupture and associated clinical events such as stroke and heart attack, and recommend proper treatment plans to prevent those clinical events from happening. Articles in this special issue came from two symposia held recently focusing on “Cardio-vascular Diseases and Vulnerable Plaques: Data, Modeling, Predictions and Clinical Applications.” One was held at Worcester Polytechnic Institute (WPI), Worcester, MA, USA, July 13-14, 2014, right after the 7th World Congress of Biomechanics. This symposium was endorsed by the World Council of Biomechanics, and partially supported by a grant from NIH-National Institute of Biomedical Image and Bioengineering. The other was held at Southeast University (SEU), Nanjing, China, April 18-20, 2014.

Finite element analysis of vulnerable atherosclerotic plaques: A comparison of mechanical stresses within carotid plaques of acute and recently symptomatic patients with carotid artery disease

Objectives: There is considerable evidence that patients with carotid artery stenosis treated immediately after the ischaemic cerebrovascular event have a better clinical outcome than those who have delayed treatment. Biomechanical assessment of carotid plaques using high-resolution MRI can help examine the relationship between the timing of carotid plaque symptomology and maximum simulated plaque stress concentration. Methods: Fifty patients underwent high-resolution multisequence in vivo MRI of their carotid arteries. Patients with acute symptoms (n=25) underwent MRI within 72 h of the onset of ischaemic cerebrovascular symptoms, whereas recently symptomatic patients (n=25) underwent MRI from 2 to 6 weeks after the onset of symptoms. Stress analysis was performed based on the geometry derived from in vivo MRI of the symptomatic carotid artery at the point of maximum stenosis. The peak stresses within the plaques of the two groups were compared. Results: Patient demographics were comparable for both groups. All the patients in the recently symptomatic group had severe carotid stenosis in contrast to patients with acute symptoms who had predominantly mild to moderate carotid stenosis. The simulated maximum stresses in patients with acute symptoms was significantly higher than in recently symptomatic patients (median (IQR): 313310 4 dynes/cm 2 (295 to 382) vs 2523104 dynes/cm 2 (236 to 311), p=0.02). Conclusions: Patients have extremely unstable, high-risk plaques, with high stresses, immediately after an acute cerebrovascular event, even at lower degrees of carotid stenoses. Biomechanical stress analysis may help us refine our risk-stratification criteria for the management of patients with carotid artery disease in future.

Identifying vulnerable carotid plaques in vivo using high resolution magnetic resonance imaging-based finite element analysis

Object. Individuals with carotid atherosclerosis develop symptoms following rupture of vulnerable plaques. Biomechanical stresses within this plaque may increase vulnerability to rupture. In this report the authors describe the use of in vivo carotid plaque imaging and computational mechanics to document the magnitude and distribution of intrinsic plaque stresses. Methods. Ten (five symptomatic and five asymptomatic) individuals underwent plaque characterization magnetic resonance (MR) imaging. Plaque geometry and composition were determined by multisequence review. Intrinsic plaque stress profiles were generated from 3D meshes by using finite element computational analysis. Differences in principal (shear) stress between normal and diseased sections of the carotid artery and between symptomatic and asymptomatic plaques were noted. Results. There was a significant difference in peak principal stress between diseased and nondiseased segments of the artery (mean difference 537.65 kPa, p < 0.05). Symptomatic plaques had higher mean stresses than asymptomatic plaques (627.6 kPa compared with 370.2 kPa, p = 0.05), which were independent of luminal stenosis and plaque composition. Conclusions. Significant differences in plaque stress exist between plaques from symptomatic individuals and those from asymptomatic individuals. The MR imaging-based computational analysis may therefore be a useful aid to identification of vulnerable plaques in vivo.

The National Road Safety Partnership Program providing a pathway for any business/organisation to create a positive road safety culture

The National Road Safety Partnership Program (NRSPP) is an industry-led collaborative network which aims to support Australian businesses in developing a positive road safety culture. It aims to help businesses to protect their employees and the public, not only during work hours, but also when their staff are ‘off-duty’. How do we engage and help an organisation minimise work-related vehicle crashes and their consequences both internally, and within the broader community? The first step is helping an organisation to understand the true cost of its road incidents. Larger organisations often wear the costs without knowing the true impact to their bottom line. All they perceive is the change in insurance or vehicle repairs. Understanding the true cost should help mobilise a business’s leadership to do more. The next step is ensuring the business undertakes an informed, structured, evidence-based pathway which will guide them around the costly pitfalls. A pathway based around the safe system approach with buy-in at the top which brings the workforce along. The final step, benchmarking, allows the organisation to measure and track its change. This symposium will explore the pathway steps for organisations using NRSPP resources to become engaged in road safety. The 'Total Cost of Risk' calculator has been developed by Zurich, tested in Europe by Nestle and modified by NRSPP for Australia. This provides the first crucial step. The next step is a structured approach through the Workplace Road Safety Guide using experts and industry to discuss the preferred safe system approach which can then link into the national Benchmarking Project. The outputs from the symposium can help frame a pathway for organisations to follow through the NRSPP website.

ASEAN and ADB implementing new approaches to building road safety capacity

Following the Association of Southeast Asian Nations (ASEAN) senior transport officials meeting in May 2011, the Secretariat requested the Asian Development Bank (ADB) to provide assistance to improve road safety in ASEAN. In response, ADB, funded by the Japan Fund for Poverty Reduction, has begun an innovative approach to capacity building that has already been adapted and replicated in other sub-regions. This paper will discuss the model central to the project. The Road Safety Capacity Building for ASEAN Project commenced in May 2013. Each country has appointed a National Focal Point (NFP) to identify and coordinate information. A team of International Experts were appointed to develop materials and present a comprehensive train the trainer program focused on five key areas. Thirty eight senior Government officers from across ASEAN attended a two week program at ADB headquarters in Manila and will arrange and deliver specific training and associated activities to other colleagues within their country. ADB has appointed a National Consultant to work in partnership with the trainees on a range of activities including development of “pipeline project proposals” for funding consideration investors and donors. As part of the project, a draft ASEAN Regional Road Safety Strategy document has been prepared and consultation will further refine its directions and contents. The project will reach its conclusion in 2015 and a follow up phase three project is being considered.

Developing a new index for comparing road safety maturity: Case study of the ASEAN community

As part of the development of the ASEAN Regional Road Safety Strategy, a new index for measuring road safety maturity (RSM) was constructed from numerical weightings given to measurable factors presented for each of the pillars that guide national road safety plans and activities in WHO Global Road Safety Report 2013: road safety management, safer road and mobility, safer vehicles, safer road users and post-crash response. The index is based on both a content analysis approach and a binary methodology (report/no report) including measures which have been considered pertinent and not redundant. For instance, the use of random breath testing and/or police checkpoints in the national drink driving law are combined in the enforcement index. The value of the index per pillar ranges from 0 to 100%, taking into account whether there is total, partial or non-implementation of certain actions. In addition, when possible, the self-rated level of enforcement is included. The overall ratings for the I 0 ASEAN countries and the scores for each of the pillars are presented in the paper. The extent to which the RSM index is a valid indicator of road safety performance is also discussed.

Strengthening local road safety capacity in Cambodia

Road crashes and injuries have become a growing issue worldwide. In 2011, more than 75,000 people died in road crashes in the ten member countries of the Association of South East Asian Nations (ASEAN) and many times this number sustained long term injuries. In 2014, the Asian Development Bank (ADB), funded by the Japan Fund for Poverty Reduction, commenced a package of actions to improve road safety in ASEAN. In 2015, as part of the technical assistance for this project, a Road Safety Advisor was appointed for Cambodia for four months. The assignment produced several primary outputs, which included the organization of national training on traffic law enforcement and road safety management, the conduct of a training needs survey and cost analysis study, and the development of a proposal for strengthening speed management. It is important to note that unlike other ADB technical assistance projects, this assignment adopted a capacity building approach, which promoted and encouraged the local road safety team in the government to step up and take action. The research capacity building approach adopted in this project highlighted the feasibility of increasing participation from existing stakeholders, especially the government in identifying existing human resources, building the capacity of relevant government officials and supporting them to take the ownership of the project. It is hoped that similar outcomes will occur in the other ASEAN countries.

A journey access tool to facilitate better health outcomes for people with disabilities

- Background One of the three objectives of the WHO Global Disability Action Plan 2014–2021 is removal of barriers and improved access to health services and programmes. Access to transport contributes to positive health outcomes; however, people with disabilities leaving their dwellings are confronted with barriers to their mobility. Mobility restrictions, sensory or other disabilities increase their vulnerability as road users, exposing them to higher risks of injury. PHSW and CARRS-Q have been collaborating with Handicap International Cambodia (HIC) on a Journey Access Tool (JAT). - Aims Use of the JAT is to (1) Identify transport and journey safety and barriers for people with disability and (2) Evaluation and modification of the tool after trailing to for use by NGOs and government agencies in prioritising actions around barriers. - Methodology The tool has undergone initial proof-of-concept testing in India and Viet Nam, and was trialled in Cambodia in February and May, 2015. Five teams were formed comprising a person with disability (physical, sensory or intellectual), researchers from QUT, staff from HIC, and local university students. The JAT was completed by each team and then discussed and evaluated. Two further Cambodian trials are scheduled for 2015. - Results The JAT is responsive to rural and urban contexts, and has utility for people with different disabilities. Two tools have been developed: a short version for people with a disability to complete independently, or with assistance; and a version for NGOs, DPOs and government. The tool has efficacy for advocacy.   - Conclusion The JAT has potential to assist the Mekong region with: (1) evaluating access for people with disability and other vulnerable members of the community including older people; (2) developing plans for changes to the routes in consultation with local authorities; (3) evaluating the effectiveness of implemented changes in terms of access and health; (4) inputting into policy; (5) The tool can be used for advocacy for change.

To Petra via Jabal Haroun : Nabataean-Roman road remains in the Finnish Jabal Haroun Project survey area

Työ käsittelee Finnish Jabal Haroun Project -tutkimusryhmän Etelä-Jordaniasta inventoimalla keräämää arkeologista aineistoa (vuosilta 1999-2005) tietutkimuksen kannalta. Työn tarkoituksena on selvittää, miksi tutkimusalueella, Aaronin vuoren ympäristössä, sijaitsee tien jäänteitä ja miten tie on maastossa muinoin kulkenut. Lisäksi työ analysoi tien varsilla havaittujen rakennusten jäännösten suhdetta tiehen ja pyrkii ajoittamaan tien käyttöajankohdan (ajankohdat). Työn alkuoletuksena on, että pääosa tienvarsirakennuksista on liitettävissä tiehen ja tien sijoittuminen tutkimusalueelle johtuu pitkälti lähistöllä sijaitsevan Petran noususta merkittäväksi, Nabatealaisten harjoittaman kaupan keskukseksi, Lähi-idässä ajanlaskun alkuun mennessä. Tien jäänteitä tarkastellaan maisema-arkeologisin perustein. Tämä tarkoittaa sitä, että analyysissä korostuvat sekä kulttuuriset että ympäristölliset vaikuttimet. Niiden välistä, aikaan sidottua, suhdetta arvioidaan menneen ihmistoiminnan selittämiseksi. Tutkimusmenetelmät ovat paikkatietojärjestelmien soveltaminen, kohdekohtainen arkeologisen aineiston ja sijainnin tutkiminen, vertailevan aineiston käyttö sekä kolmiulotteinen tarkastelu. Tie ajoitetaan tienvarsikohteiden keramiikkalöytöjen avulla sekä rakenneanalyysin perusteella. Tutkimus osoittaa tien syntyneen alueen sijainnin takia. Sijainti oli edullinen suhteessa luonnonvaroihin, asutuskeskuksiin ja luontaisiin kulkuväyliin. Tien rakentajat osasivat taidokkaasti hyödyntää alueen luonnonpiirteitä ja käyttivät erityisiä menetelmiä vaikeiden tieosuuksien turvaamiseksi luonnonvoimien tuhoilta. Suurin osa tienvarsirakenteista voidaan katsoa johtuvan suoraan tien olemassaolosta, pieni osa rakenteista palveli pääsääntöisesti muita maankäytön muotoja. Petran vaikutus tien olemassaoloon ja muotoon oli suuri, kaupungin kehitys ja kukoistus näkyvät tiehen liitettävässä arkeologisessa aineistossa. Tien aktiivinen käyttö näyttää jatkuneen myös Roomalaisaikaan ensimmäisille vuosisadoille jKr., jonka jälkeen se hitaasti hiipui.

Multi-Hypotheses Tracking using the Dempster–Shafer Theory, application to ambiguous road context

This paper presents a Multi-Hypotheses Tracking (MHT) approach that allows solving ambiguities that arise with previous methods of associating targets and tracks within a highly volatile vehicular environment. The previous approach based on the Dempster–Shafer Theory assumes that associations between tracks and targets are unique; this was shown to allow the formation of ghost tracks when there was too much ambiguity or conflict for the system to take a meaningful decision. The MHT algorithm described in this paper removes this uniqueness condition, allowing the system to include ambiguity and even to prevent making any decision if available data are poor. We provide a general introduction to the Dempster–Shafer Theory and present the previously used approach. Then, we explain our MHT mechanism and provide evidence of its increased performance in reducing the amount of ghost tracks and false positive processed by the tracking system.

Motorcycle riders' self-reported aggression when riding compared with car driving

Aggressive driving has been shown to be related to increased crash risk for car driving. However, less is known about aggressive behaviour and motorcycle riding and whether there are differences in on-road aggression as a function of vehicle type. If such differences exist, these could relate to differences in perceptions of relative vulnerability associated with characteristics of the type of vehicle such as level of protection and performance. Specifically, the relative lack of protection offered by motorcycles may cause riders to feel more vulnerable and therefore to be less aggressive when they are riding compared to when they are driving. This study examined differences in self-reported aggression as a function of two vehicle types: passenger cars and motorcycles. Respondents (n = 247) were all motorcyclists who also drove a car. Results were that scores for the composite driving aggression scale were significantly higher than on the composite riding aggression scale. Regression analyses identified different patterns of predictors for driving aggression from those for riding aggression. Safety attitudes followed by thrill seeking tendencies were the strongest predictors for driving aggression, with more positive safety attitudes being protective while greater thrill seeking was associated with greater self-reported aggressive driving behaviour. For riding aggression, thrill seeking was the strongest predictor (positive relationship), followed by self-rated skill, such that higher self rated skill was protective against riding aggression. Participants who scored at the 85th percentile or above for the aggressive driving and aggressive riding indices had significantly higher scores on thrill seeking, greater intentions to engage in future risk taking, and lower safety attitude scores than other participants. In addition participants with the highest aggressive driving scores also had higher levels of self-reported past traffic offences than other participants. Collectively, these findings suggest that people are less likely to act aggressively when riding a motorcycle than when driving a car, and that those who are the most aggressive drivers are different from those who are the most aggressive riders. However, aggressive riders and drivers appear to present a risk to themselves and others on road. Importantly, the underlying influences for aggressive riding or driving that were identified in this study may be amenable to education and training interventions.

Mobile assessment of on-road air pollution and its sources along the East-West Highway in Bhutan

Human exposures in transportation microenvironments are poorly represented by ambient stationary monitoring. A number of on-road studies using vehicle-based mobile monitoring have been conducted to address this. Most previous studies were conducted on urban roads in developed countries where the primary emission source was vehicles. Few studies have examined on-road pollution in developing countries in urban settings. Currently, no study has been conducted for roadways in rural environments where a substantial proportion of the population live. This study aimed to characterize on-road air quality on the East-West Highway (EWH) in Bhutan and identify its principal sources. We conducted six mobile measurements of PM10, particle number (PN) count and CO along the entire 570 km length of the EWH. We divided the EWH into five segments, R1-R5, taking the road length between two district towns as a single road segment. The pollutant concentrations varied widely along the different road segments, with the highest concentrations for R5 compared with other road segments (PM10 = 149 µg/m3, PN = 5.74 × 104 particles/cm-3, CO = 0.19 ppm), which is the final segment of the road to the capital. Apart from vehicle emissions, the dominant sources were road works, unpaved roads and roadside combustion activities. Overall, the highest contributions above the background levels were made by unpaved roads for PM10 (6 times background), and vehicle emissions for PN and CO (5 and 15 times background, respectively). Notwithstanding the differences in instrumentation used and particle size range measured, the current study showed lower PN concentrations compared with similar on-road studies. However, concentrations were still high enough that commuters, road maintenance workers and residents living along the EWH, were potentially exposed to elevated pollutant concentrations from combustion and non-combustion sources. Future studies should focus on assessing the dispersion patterns of roadway pollutants and defining the short- and long-term health impacts of exposure in Bhutan, as well as in other developing countries with similar characteristics.