The design and implementation of a portable operating system for microcomputers

Communication and portability are the two main problems facing the user. An operating system, called PORTOS, was developed to solve these problems for users on dedicated microcomputer systems. Firstly, an interface language was defined, according to the anticipated requirements and behaviour of its potential users. Secondly, the PORTOS operating system was developed as a processor for this language. The system is currently running on two minicomputers of highly different architectures. PORTOS achieves its portability through its high-level design, and implementation in CORAL66. The interface language consists of a set of user cotnmands and system responses. Although only a subset has been implemented, owing to time and manpower constraints, promising results were achieved regarding the usability of the language, and its portability.

An argument for using participatory approaches for the design of online health interventions targeted at young women

The Internet is becoming an increasingly important portal to health information and means for promoting health in user populations. As the most frequent users of online health information, young women are an important target population for e-health promotion interventions. Health-related websites have traditionally been generic in design, resulting in poor user engagement and affecting limited impacts on health behaviour change. Mounting evidence suggests that the most effective health promotion communication strategies are collaborative in nature, fully engaging target users throughout the development process. Participatory design approaches to interface development enable researchers to better identify the needs and expectations of users, thus increasing user engagement in, and promoting behaviour change via, online health interventions. This article introduces participatory design methods applicable to online health intervention design and presents an argument for the use of such methods in the development of e-Health applications targeted at young women.

An approach for design and analysis of User-centric Communication Middleware

Today, the development of domain-specific communication applications is both time-consuming and error-prone because the low-level communication services provided by the existing systems and networks are primitive and often heterogeneous. Multimedia communication applications are typically built on top of low-level network abstractions such as TCP/UDP socket, SIP (Session Initiation Protocol) and RTP (Real-time Transport Protocol) APIs. The User-centric Communication Middleware (UCM) is proposed to encapsulate the networking complexity and heterogeneity of basic multimedia and multi-party communication for upper-layer communication applications. And UCM provides a unified user-centric communication service to diverse communication applications ranging from a simple phone call and video conferencing to specialized communication applications like disaster management and telemedicine. It makes it easier to the development of domain-specific communication applications. The UCM abstraction and API is proposed to achieve these goals. The dissertation also tries to integrate the formal method into UCM development process. The formal model is created for UCM using SAM methodology. Some design errors are found during model creation because the formal method forces to give the precise description of UCM. By using the SAM tool, formal UCM model is translated to Promela formula model. In the dissertation, some system properties are defined as temporal logic formulas. These temporal logic formulas are manually translated to promela formulas which are individually integrated with promela formula model of UCM and verified using SPIN tool. Formal analysis used here helps verify the system properties (for example multiparty multimedia protocol) and dig out the bugs of systems.

Design of an automated book reader as an assistive technology tool for blind persons

This dissertation introduces a novel automated book reader as an assistive technology tool for persons with blindness. The literature shows extensive work in the area of optical character recognition, but the current methodologies available for the automated reading of books or bound volumes remain inadequate and are severely constrained during document scanning or image acquisition processes. The goal of the book reader design is to automate and simplify the task of reading a book while providing a user-friendly environment with a realistic but affordable system design. This design responds to the main concerns of (a) providing a method of image acquisition that maintains the integrity of the source (b) overcoming optical character recognition errors created by inherent imaging issues such as curvature effects and barrel distortion, and (c) determining a suitable method for accurate recognition of characters that yields an interface with the ability to read from any open book with a high reading accuracy nearing 98%. This research endeavor focuses in its initial aim on the development of an assistive technology tool to help persons with blindness in the reading of books and other bound volumes. But its secondary and broader aim is to also find in this design the perfect platform for the digitization process of bound documentation in line with the mission of the Open Content Alliance (OCA), a nonprofit Alliance at making reading materials available in digital form. The theoretical perspective of this research relates to the mathematical developments that are made in order to resolve both the inherent distortions due to the properties of the camera lens and the anticipated distortions of the changing page curvature as one leafs through the book. This is evidenced by the significant increase of the recognition rate of characters and a high accuracy read-out through text to speech processing. This reasonably priced interface with its high performance results and its compatibility to any computer or laptop through universal serial bus connectors extends greatly the prospects for universal accessibility to documentation.

A multimodal and adaptive real-time human -computer interface for peoples with severe motor disability

This dissertation introduces the design of a multimodal, adaptive real-time assistive system as an alternate human computer interface that can be used by individuals with severe motor disabilities. The proposed design is based on the integration of a remote eye-gaze tracking system, voice recognition software, and a virtual keyboard. The methodology relies on a user profile that customizes eye gaze tracking using neural networks. The user profiling feature facilitates the notion of universal access to computing resources for a wide range of applications such as web browsing, email, word processing and editing. ^ The study is significant in terms of the integration of key algorithms to yield an adaptable and multimodal interface. The contributions of this dissertation stem from the following accomplishments: (a) establishment of the data transport mechanism between the eye-gaze system and the host computer yielding to a significantly low failure rate of 0.9%; (b) accurate translation of eye data into cursor movement through congregate steps which conclude with calibrated cursor coordinates using an improved conversion function; resulting in an average reduction of 70% of the disparity between the point of gaze and the actual position of the mouse cursor, compared with initial findings; (c) use of both a moving average and a trained neural network in order to minimize the jitter of the mouse cursor, which yield an average jittering reduction of 35%; (d) introduction of a new mathematical methodology to measure the degree of jittering of the mouse trajectory; (e) embedding an onscreen keyboard to facilitate text entry, and a graphical interface that is used to generate user profiles for system adaptability. ^ The adaptability nature of the interface is achieved through the establishment of user profiles, which may contain the jittering and voice characteristics of a particular user as well as a customized list of the most commonly used words ordered according to the user's preferences: in alphabetical or statistical order. This allows the system to successfully provide the capability of interacting with a computer. Every time any of the sub-system is retrained, the accuracy of the interface response improves even more. ^

Design and implementation of a web based shop floor control system to maintain schedule feasibility in a dynamic job shop environment

The effective control of production activities in dynamic job shop with predetermined resource allocation for all the jobs entering the system is a unique manufacturing environment, which exists in the manufacturing industry. In this thesis a framework for an Internet based real time shop floor control system for such a dynamic job shop environment is introduced. The system aims to maintain the schedule feasibility of all the jobs entering the manufacturing system under any circumstance. The system is capable of deciding how often the manufacturing activities should be monitored to check for control decisions that need to be taken on the shop floor. The system will provide the decision maker real time notification to enable him to generate feasible alternate solutions in case a disturbance occurs on the shop floor. The control system is also capable of providing the customer with real time access to the status of the jobs on the shop floor. The communication between the controller, the user and the customer is through web based user friendly GUI. The proposed control system architecture and the interface for the communication system have been designed, developed and implemented.

Usabilidade da Interface do Sistema Eletrônico de Editoração de Revistas: um estudo da revista BiblioCanto da UFRN

The electronic journals correspond publishing channels and dissemination of scientific information. Through them, users can spread their studies as well as developing new researches. One of the systems used for creation and e-journals management is the Electronic System for Journal Publishing (SEER), used in the construction of periodic portals, as well as the creation of magazines in isolation. In this purport, it is believed that the management systems and creation of e-journals should be developed (internally and externally) according to the needs of its users. In the case of internal development, some of these processes refer to the copyright registration and submission of articles, which, in turn, are relevant tasks in the editorial process. Thus, the proposed study, thematic Usability of scientific journals, aims to analyze the usability of the copyright registration process and submission of articles in the Electronic System for Journal Publishing through BiblioCanto magazine, part of the Electronic Journals Portal of the Federal University of Rio Grande do Norte (UFRN). For the realization of the research, two valuation techniques were used: the Usability Test with a total of twenty participants and the Cooperative Evaluation, with the same number of participants separated in four categories considered target audience of that magazine, namely: undergraduate students, graduate students, teachers and librarians. The results indicated that the two analyzed processes (copyright registration and submission of articles) need improvement. In the case of the registration process, the following needs are: signalizing of the conducting registration ambient; description and exclusion of requested information on the registration form. In the process of article submission, it is emphasized improvement of aspects: the early steps to submission, signaling of required fields, concise description of the steps, minimization and review of the steps. To this end, it is believed that in general idea the SEER partially meets the needs of its users regarding the usability of such software.

Usabilidade da Interface do Sistema Eletrônico de Editoração de Revistas: um estudo da revista BiblioCanto da UFRN

The electronic journals correspond publishing channels and dissemination of scientific information. Through them, users can spread their studies as well as developing new researches. One of the systems used for creation and e-journals management is the Electronic System for Journal Publishing (SEER), used in the construction of periodic portals, as well as the creation of magazines in isolation. In this purport, it is believed that the management systems and creation of e-journals should be developed (internally and externally) according to the needs of its users. In the case of internal development, some of these processes refer to the copyright registration and submission of articles, which, in turn, are relevant tasks in the editorial process. Thus, the proposed study, thematic Usability of scientific journals, aims to analyze the usability of the copyright registration process and submission of articles in the Electronic System for Journal Publishing through BiblioCanto magazine, part of the Electronic Journals Portal of the Federal University of Rio Grande do Norte (UFRN). For the realization of the research, two valuation techniques were used: the Usability Test with a total of twenty participants and the Cooperative Evaluation, with the same number of participants separated in four categories considered target audience of that magazine, namely: undergraduate students, graduate students, teachers and librarians. The results indicated that the two analyzed processes (copyright registration and submission of articles) need improvement. In the case of the registration process, the following needs are: signalizing of the conducting registration ambient; description and exclusion of requested information on the registration form. In the process of article submission, it is emphasized improvement of aspects: the early steps to submission, signaling of required fields, concise description of the steps, minimization and review of the steps. To this end, it is believed that in general idea the SEER partially meets the needs of its users regarding the usability of such software.

L'interactivité tactile et la compréhension de l'objet virtuel : utilisation potentielle de l'interface haptique en design industriel

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

L'interactivité tactile et la compréhension de l'objet virtuel : utilisation potentielle de l'interface haptique en design industriel

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

Design and Implementation of Tools for STM Studies in UHV and at the Solid-Liquid Interface

This thesis presents details of the design and development of novel tools and instruments for scanning tunneling microscopy (STM), and may be considered as a repository for several years' worth of development work. The author presents design goals and implementations for two microscopes. First, a novel Pan-type STM was built that could be operated in an ambient environment as a liquid-phase STM. Unique features of this microscope include a unibody frame, for increased microscope rigidity, a novel slider component with large Z-range, a unique wiring scheme and damping mechanism, and a removable liquid cell. The microscope exhibits a high level of mechanical isolation at the tunnel junction, and operates excellently as an ambient tool. Experiments in liquid are on-going. Simultaneously, the author worked on designs for a novel low temperature, ultra-high vacuum (LT-UHV) instrument, and these are presented as well. A novel stick-slip vertical coarse approach motor was designed and built. To gauge the performance of the motor, an in situ motion sensing apparatus was implemented, which could measure the step size of the motor to high precision. A new driving circuit for stick-slip inertial motors is also presented, that o ffers improved performance over our previous driving circuit, at a fraction of the cost. The circuit was shown to increase step size performance by 25%. Finally, a horizontal sample stage was implemented in this microscope. The build of this UHV instrument is currently being fi nalized. In conjunction with the above design projects, the author was involved in a collaborative project characterizing N-heterocyclic carbene (NHC) self-assembled monolayers (SAMs) on Au(111) films. STM was used to characterize Au substrate quality, for both commercial substrates and those manufactured via a unique atomic layer deposition (ALD) process by collaborators. Ambient and UHV STM was then also used to characterize the NHC/Au(111) films themselves, and several key properties of these films are discussed. During this study, the author discovered an unexpected surface contaminant, and details of this are also presented. Finally, two models are presented for the nature of the NHC-Au(111) surface interaction based on the observed film properties, and some preliminary theoretical work by collaborators is presented.

The user's view level of the GOQL graphical query language

The paper addresses issues related to the design of a graphical query mechanism that can act as an interface to any object-oriented database system (OODBS), in general, and the object model of ODMG 2.0, in particular. In the paper a brief literature survey of related work is given, and an analysis methodology that allows the evaluation of such languages is proposed. Moreover, the user's view level of a new graphical query language, namely GOQL (Graphical Object Query Language), for ODMG 2.0 is presented. The user's view level provides a graphical schema that does not contain any of the perplexing details of an object-oriented database schema, and it also provides a foundation for a graphical interface that can support ad-hoc queries for object-oriented database applications. We illustrate, using an example, the user's view level of GOQL

Making the user more efficient: Design for sustainable behaviour

User behaviour is a significant determinant of a product’s environmental impact; while engineering advances permit increased efficiency of product operation, the user’s decisions and habits ultimately have a major effect on the energy or other resources used by the product. There is thus a need to change users’ behaviour. A range of design techniques developed in diverse contexts suggest opportunities for engineers, designers and other stakeholders working in the field of sustainable innovation to affect users’ behaviour at the point of interaction with the product or system, in effect ‘making the user more efficient’. Approaches to changing users’ behaviour from a number of fields are reviewed and discussed, including: strategic design of affordances and behaviour-shaping constraints to control or affect energyor other resource-using interactions; the use of different kinds of feedback and persuasive technology techniques to encourage or guide users to reduce their environmental impact; and context-based systems which use feedback to adjust their behaviour to run at optimum efficiency and reduce the opportunity for user-affected inefficiency. Example implementations in the sustainable engineering and ecodesign field are suggested and discussed.

Designing for User-facing Uncertainty in Everyday Sensing and Prediction

Thesis (Ph.D.)--University of Washington, 2016-07