907 resultados para tip pruning
Resumo:
A fast and robust analytical method for amperometric determination of hydrogen peroxide (H(2)O(2)) based on batch injection analysis (BIA) on an array of gold microelectrodes modified with platinum is proposed. The gold microelectrode array (n = 14) was obtained from electronic chips developed for surface mounted device technology (SMD), whose size offers advantages to adapt them in batch cells. The effect of the dispensing rate, volume injected, distance between the platinum microelectrodes and the pipette tip, as well as the volume of solution in the cell on the analytical response were evaluated. The method allows the H(2)O(2) amperometric determination in the concentration range from 0.8 mu mol L(-1) to 100 mu mol L(-1). The analytical frequency can attain 300 determinations per hour and the detection limit was estimated in 0.34 mu mol L(-1) (3 sigma). The anodic current peaks obtained after a series of 23 successive injections of 50 mu L of 25 mu mol L(-1) H(2)O(2) showed an RSD < 0.9%. To ensure the good selectivity to detect H(2)O(2), its determination was performed in a differential mode, with selective destruction of the H(2)O(2) with catalase in 10 mmol L(-1) phosphate buffer solution. Practical application of the analytical procedure involved H(2)O(2) determination in rainwater of Sao Paulo City. A comparison of the results obtained by the proposed ampermetric method with another one which combines flow injection analysis (FIA) with spectrophotometric detection showed good agreement. (C) 2011 Elsevier B.V. All rights reserved.
Resumo:
Scanning electrochemical microscopy (SECM) in feedback mode was employed to characterise the reactivity and microscopic peculiarities of bismuth and bismuth/lead alloys plated onto gold disk substrates in 0.1 molL(-1) NaOH solutions. Methyl viologen was used as redox mediator, while a platinum microelectrode was employed as the SECM tip. The metal films were electrodeposited ex situ from NaOH solutions containing either bismuth ions only or both bismuth and lead ions. Approach curves and SECM images indicated that the metal films were conductive and locally reactive with oxygen to provide Bi(3+) and Pb(2+) ions. The occurrence of the latter chemical reactions was verified by local anodic stripping voltammetry (ASV) at the substrate solution interface by using a mercury-coated platinum SECM tip. The latter types of measurements allowed also verifying that lead was not uniformly distributed onto the bismuth film electrode substrate. These findings were confirmed by scanning electron microscopy images. The surface heterogeneity produced during the metal deposition process, however, did not affect the analytical performance of the bismuth coated gold electrode in anodic stripping voltammetry for the determination of lead in alkaline media, even in aerated aqueous solutions. Under the latter conditions, stripping peak currents proportional to lead concentration with a satisfactory reproducibility (within 5% RSD) were obtained.
Resumo:
This paper describes the automation of a fully electrochemical system for preconcentration, cleanup, separation and detection, comprising the hyphenation of a thin layer electrochemical flow cell with CE coupled with contactless conductivity detection (CE-C(4)D). Traces of heavy metal ions were extracted from the pulsed-flowing sample and accumulated on a glassy carbon working electrode by electroreduction for some minutes. Anodic stripping of the accumulated metals was synchronized with hydrodynamic injection into the capillary. The effect of the angle of the slant polished tip of the CE capillary and its orientation against the working electrode in the electrochemical preconcentration (EPC) flow cell and of the accumulation time were studied, aiming at maximum CE-C(4)D signal enhancement. After 6 min of EPC, enhancement factors close to 50 times were obtained for thallium, lead, cadmium and copper ions, and about 16 for zinc ions. Limits of detection below 25 nmol/L were estimated for all target analytes but zinc. A second separation dimension was added to the CE separation capabilities by staircase scanning of the potentiostatic deposition and/or stripping potentials of metal ions, as implemented with the EPC-CE-C(4)D flow system. A matrix exchange between the deposition and stripping steps, highly valuable for sample cleanup, can be straightforwardly programmed with the multi-pumping flow management system. The automated simultaneous determination of the traces of five accumulable heavy metals together with four non-accumulated alkaline and alkaline earth metals in a single run was demonstrated, to highlight the potentiality of the system.
Resumo:
I ett bestånd med björk, planterad 1990 på nedlagd åkermark i 3x1 m förband har en jämförande studie gjorts. Halva arealen har traditionell skogsproduktion, vilken jämförts med en del med skötsel för kombinerad betesdrift och skogsproduktion. I arbetet redovisas utnyttjad metodik vid anläggning, markbehandling, ogräsbekämpning, stängsling och djurhållning, röjning och gallring, nuvarande och beräknad total produktion, grenrensning samt skador. Tre viktiga regler som har bidragit till den lyckosamma etableringen vid beskogningen av denna betesmark är kontinuerlig ogräsbekämpning, tidig och kraftfull röjning/gallring samt stängsling.In a birch stand established in 1990 on former agricultural land in a 3x1 m spacing a comparative study was made. Half the accerage has ad a traditional silviculture while the other half has been managed aiming at future grace land combined with wood production. In this paper we describe the establishment method used, soil treatment, weed protection, fencing and animal treatment, thinning, productivity and yield, furthermore pruning and occurrence of damages. Three important rules for establishment of silvipastures are continuous weed elimination, early, forceful thinning and good fencing.
Resumo:
Högskolan Dalarna har i samarbete med Naturbränsle i Mellansverige AB genomfört studier på ett nytt fordon för transport av skogsflis. Fordonet är försett med egen lastningsutrustning (kran och skopa), vilket innebär att flisskördaren kan tippa flisen direkt på marken eller på en i förväg utlagd duk (minskar risken för föroreningar i samband med lastning). Studier har också genomförts på transport av flis med lastväxlarfordon och container (traditionell metod) för att jämförelser skall kunna göras mellan de olika fordonstyperna. Studierna har finansie¬rats via anslag från Statens Energimyndighet och via ”naturabidrag” från deltagande företag.Studierna visar att det nya transportfordonet är ett bättre alternativ än de traditionella last¬växlarfordonen på större objekt med långa transportavstånd. Dessutom pekar studien på att det är sannolikt är bättre även på små objekt under förutsättning att flisningskostnaden kan hållas på en rimlig nivå. Studierna visar också att det bör finnas en viss utvecklingspotential på det nya fordonet (teknik- och metodutveckling), varför det bedöms kunna konkurrera med lastväxlarfordonen även på andra typer av objekt.Jämfört med de traditionella lastväxlarfordonen har det nya fordonet bl.a. följande fördelar:•Transportarbetet blir lättare att planera i och med att beroendeförhållandet mellan in¬blandade maskiner och fordon för flisproduktion och transport upphör.••Risken för störningar i transportflödet minskar.•Miljövinsterna blir större jämfört med lastväxlarfordon som måste ställa ut tomma con¬tainrar innan flisningen kan påbörjas.•Det finns inget behov av lastmaskiner på terminalerna.•Flis kan mellanlagras i skogen.Till nackdelarna med det nya fordonet hör bl.a. följande:•Framkomligheten är något sämre än för lastväxlarfordon på mycket smala och kurviga skogsbilvägar.•Det finns en viss risk för att föroreningar följer med vid lastning av fordonet. Studies were carried out on a new vehicle for transport of fuel chips from the forest. The vehicle was equipped with a crane and a bucket meaning that the chipper may tip the fuel chips right on the ground or on a mat (vira from wood processing industry) to prevent from dirt such as sand and stones when loading. Studies were also carried out on traditional main hauling with transport bins. Transport speed was the same for all vehicles except for the new self-loader on forest roads with lower quality.The studies show that the new system probably is a better alternative on large sites with long transport distances and on sites with only little parking place for transport bins. It is also likely that the new vehicle may be used on very small sites if they are close to each other and if moving cost for the chipper is low.The studies show that the new vehicle has the following advantages:•Transport and other work may be planned in a better way leading to that stress de¬creases.•Dependence between chipper operators and truck drivers decreases.•The risk for disturbances in transport flow decreases.•Environment benefits compared to traditional system with higher traffic intensity (less exhaust gases and lower stress on roads and bridges).•No need for loading machines on terminals.•Easier to store fuel chips on landing.
Resumo:
Objective: To develop a method for objective quantification of PD motor symptoms related to Off episodes and peak dose dyskinesias, using spiral data gathered by using a touch screen telemetry device. The aim was to objectively characterize predominant motor phenotypes (bradykinesia and dyskinesia), to help in automating the process of visual interpretation of movement anomalies in spirals as rated by movement disorder specialists. Background: A retrospective analysis was conducted on recordings from 65 patients with advanced idiopathic PD from nine different clinics in Sweden, recruited from January 2006 until August 2010. In addition to the patient group, 10 healthy elderly subjects were recruited. Upper limb movement data were collected using a touch screen telemetry device from home environments of the subjects. Measurements with the device were performed four times per day during week-long test periods. On each test occasion, the subjects were asked to trace pre-drawn Archimedean spirals, using the dominant hand. The pre-drawn spiral was shown on the screen of the device. The spiral test was repeated three times per test occasion and they were instructed to complete it within 10 seconds. The device had a sampling rate of 10Hz and measured both position and time-stamps (in milliseconds) of the pen tip. Methods: Four independent raters (FB, DH, AJ and DN) used a web interface that animated the spiral drawings and allowed them to observe different kinematic features during the drawing process and to rate task performance. Initially, a number of kinematic features were assessed including ‘impairment’, ‘speed’, ‘irregularity’ and ‘hesitation’ followed by marking the predominant motor phenotype on a 3-category scale: tremor, bradykinesia and/or choreatic dyskinesia. There were only 2 test occasions for which all the four raters either classified them as tremor or could not identify the motor phenotype. Therefore, the two main motor phenotype categories were bradykinesia and dyskinesia. ‘Impairment’ was rated on a scale from 0 (no impairment) to 10 (extremely severe) whereas ‘speed’, ‘irregularity’ and ‘hesitation’ were rated on a scale from 0 (normal) to 4 (extremely severe). The proposed data-driven method consisted of the following steps. Initially, 28 spatiotemporal features were extracted from the time series signals before being presented to a Multilayer Perceptron (MLP) classifier. The features were based on different kinematic quantities of spirals including radius, angle, speed and velocity with the aim of measuring the severity of involuntary symptoms and discriminate between PD-specific (bradykinesia) and/or treatment-induced symptoms (dyskinesia). A Principal Component Analysis was applied on the features to reduce their dimensions where 4 relevant principal components (PCs) were retained and used as inputs to the MLP classifier. Finally, the MLP classifier mapped these components to the corresponding visually assessed motor phenotype scores for automating the process of scoring the bradykinesia and dyskinesia in PD patients whilst they draw spirals using the touch screen device. For motor phenotype (bradykinesia vs. dyskinesia) classification, the stratified 10-fold cross validation technique was employed. Results: There were good agreements between the four raters when rating the individual kinematic features with intra-class correlation coefficient (ICC) of 0.88 for ‘impairment’, 0.74 for ‘speed’, 0.70 for ‘irregularity’, and moderate agreements when rating ‘hesitation’ with an ICC of 0.49. When assessing the two main motor phenotype categories (bradykinesia or dyskinesia) in animated spirals the agreements between the four raters ranged from fair to moderate. There were good correlations between mean ratings of the four raters on individual kinematic features and computed scores. The MLP classifier classified the motor phenotype that is bradykinesia or dyskinesia with an accuracy of 85% in relation to visual classifications of the four movement disorder specialists. The test-retest reliability of the four PCs across the three spiral test trials was good with Cronbach’s Alpha coefficients of 0.80, 0.82, 0.54 and 0.49, respectively. These results indicate that the computed scores are stable and consistent over time. Significant differences were found between the two groups (patients and healthy elderly subjects) in all the PCs, except for the PC3. Conclusions: The proposed method automatically assessed the severity of unwanted symptoms and could reasonably well discriminate between PD-specific and/or treatment-induced motor symptoms, in relation to visual assessments of movement disorder specialists. The objective assessments could provide a time-effect summary score that could be useful for improving decision-making during symptom evaluation of individualized treatment when the goal is to maximize functional On time for patients while minimizing their Off episodes and troublesome dyskinesias.
Resumo:
No processo de soldagem TIG (Tungstênio Inerte Gás), um dos fatores que influenciam o formato do cordão de solda é o ângulo da extremidade do eletrodo. Para estudar o comportamento do arco elétrico em função da geometria de ponta do eletrodo e suas conseqüências nos cordões de solda, efetuaram-se soldagens sobre corpos de prova sem deposição de material (bead-on-plate) através de parâmetros controlados e a mecanização do processo. Parâmetros tais como vazão do gás, velocidade de avanço da tocha e comprimento do arco foram testados para verificar a atuação em conjunto com o ângulo do eletrodo. Pela análise metalográfica (macrografia) estudaram-se os perfis dos cordões de solda, verificando-se que o ângulo exerce uma influência significativa na característica do arco tensão-corrente, na largura e profundidade de penetração da solda. Para maiores ângulos de extremidade do eletrodo obteve-se aumento na penetração, diminuição da tensão e largura do cordão de solda para uma mesma intensidade de corrente.
Resumo:
O uso de cateteres venosos centrais (CVC) para fins diagnósticos e terapêuticos está incorporado à prática médica diária. Complicações sérias, com elevada morbidade e mortalidade, como a sepse, estão associadas a este procedimento. O diagnóstico das infecções relacionadas a cateter é fundamentado em sinais clínicos e laboratoriais. Os fatores de risco para infecção devem ser considerados por ocasião da utilização de CVC e estão relacionados ao paciente, ao cateter, ao tipo de solução administrada, ao profissional que manipula o cateter e ao agente etiológico. A identificação destes fatores permite a intervenção precoce sobre os mesmos e o manejo adequado do CVC e das complicações clínicas relacionadas.
Resumo:
A inovação tecnológica é um dos principais fatores de competitividade das economias modernas e, em todos os países desenvolvidos, é objeto de políticas oficiais para sua promoção. No Brasil, a Financiadora de Estudos e Projetos (Finep) apóia o desenvolvimento tecnológico das empresas desde 1976. A partir de 2006, passou a operar também subsídios diretos na forma de subvenção econômica. Este estudo caracteriza a subvenção econômica no marco legal brasileiro, apresentando exemplos de sua utilização como política pública e, especificamente, a subvenção à inovação operada pela Finep no período de 2006 a 2009. Em seguida, o instrumento da Finep é comparado, por análise de conteúdo, com programas de subsídio correlatos em países desenvolvidos. Para tal, foram selecionados os programas norte americanos SBIR, ATP e TIP, e aqueles operados pela OSEO na França e CDTI na Espanha. São abordados aspectos relativos à lógica de intervenção, dando ênfase a questões como risco tecnológico, intensidade no apoio, modelos institucionais e integração de instrumentos de apoio.
Resumo:
A Automação e o processo de Robotização vêm, cada vem mais, se tornando pauta nas discussões de centenas de indústrias brasileiras, onde a tendência clara e identificada é a de investimentos expressivos na melhoria de processos e produtos, por intermédio dessas tecnologias; com foco, sempre que possível, na nacionalização de equipamentos. O presente trabalho tem como objetivo avaliar o modelo proposto por Paul Kennedy (1993) com relação à tendência de Automação e Robotização nas Indústrias Mundiais, analisando o estudo realizado diante de uma economia emergente como a brasileira. Para tanto, foram pesquisadas empresas no Brasil, em diferentes segmentos industriais, o estado da arte em termos de tecnologia de automação e robótica aplicada a processos industriais, e sugerido um modelo diferente do idealizado originalmente por Kennedy. A análise do autor se baseou no teorema que, na matemática discreta, chamamos de “law of the excluded middle”, ou seja, segundo Kennedy, o Brasil estaria vivendo hoje uma migração gradual das indústrias para os países ricos. O Brasil é um exemplo de país industrializado, de economia emergente, que investe intensamente em processos automatizados, mas que não é classificado dentro do grupo desses países ricos. Através da pesquisa realizada será apresentado um novo modelo, no qual países emergentes como o Brasil têm acesso à tecnologia de ponta em automação e robótica, aplicando a mesma em seus processos industriais.
Resumo:
O objetivo desta tese é contribuir com a análise das emoções, a partir dos papéis da valência e da excitação emocional, como influenciadoras do compartilhamento de informação entre consumidores online. Pessoas compartilham onversando ou utilizando ferramentas de compartilhamento de conteúdo na internet, como as redes sociais virtuais. O compartilhamento de conteúdo na internet leva a uma maior difusão, fazendo com que eles se viralizem, ou seja, sejam retransmitidos diversas vezes, atingindo diferentes públicos (HO; DEMPSEY, 2010). Ainda há dúvidas na literatura sobre as causas desta viralização, e o quanto as emoções influenciam o processo, articularmente se as pessoas tendem a compartilhar mais o que lhes é positivo, o que lhes causa mais excitação (BERGER; MILKMAN, 2012) ou se há um perfil específico de consumidor que se engaja mais nessas ações, como os chamados advogados de marca, e como tal perfil se comporta. Para investigar isso, foram conduzidos quatro experimentos: o primeiro comparou a propensão a compartilhar notícias de valências emocionais e excitações diferentes, o segundo relacionou a propensão a compartilhar propagandas e notícias com valências diferentes, o terceiro analisou como advogados de marca declarados agem com relação a conteúdo de diferentes valências e o quarto comparou a propensão a compartilhar de propagandas com diferentes valências e estímulos ao compartilhamento (nenhum, dica de um amigo ou participação em um sorteio). Os conteúdos de valência positiva que geraram maior excitação ou tidos como mais úteis seriam mais compartilhados, enquanto advogados de marca deram ênfase em suas respostas ao conteúdo negativo, negando-o, justificando-o ou se abstendo, e foram mais intensos ao reclamar de problemas que eles próprios sofreram. Os principais achados desta tese são que a) conteúdo online de valência positiva e de alta excitação tem maior probabilidade de ser compartilhado, porém b) conteúdo online de valência negativa é tido como mais útil e gera maior excitação. Além disso, c) se o conteúdo for referente a uma marca com que o consumidor é engajado, ele reagirá com respostas mais circunstanciadas e d) se o conteúdo lhe for indicado por um amigo, ele tem maior chance de compartilhar. A principal contribuição desta tese é auxiliar na compreensão, teórica e gerencial, do compartilhamento entre usuários, avaliando o 9 impacto de conteúdo excitante ou útil, seja de valência positiva ou negativa, permitindo às organizações dimensionar seus esforços de comunicação e de relacionamento com clientes, com vistas a selecionar as abordagens mais adequadas às mensagens
Resumo:
To implement policies and plans at the tourist sector involve disposition to the establishment of parceries among government and private initiative, space to the action of studious, researchers and professionals of several areas of knowledge and formation, able of to give new courses no only at the tourism, but to the economy how a every, seen which the tourism had a effect multiplicator, reaching 52 sectors of the economy. At this sense, the Brazil came pruning for a new phase of politic actuation at the touristy activity. Until the year 2002, the tourism politic in the Brazil no had detail, because herself treated of isolated actions and many without continuity. However, at to start 2003, several actions were developed in order to contribute for the national touristy planning. The principal was the creation of Ministério do Turismo, accompanied of the formulation and implementation of the Plano Nacional do Turismo (2003/2007). This work pretend to understand the implementation at the Rio Grande do Norte of the model of participative administration extolled by Plano Nacional do Turismo. The your centre detail the action of the Conselho Estadual de Turismo do Rio Grande do Norte (CONETUR), to promote the participation at the tourism public policies. The bibliographical research contemplated diverse sources in order to compile knowledge of credential authors in the quarrel of inherent subjects to the participation and to the tourism public policies, especially at the Brazil. A qualitative perspective the case study was adapted as research method and for attainment of the data interviews with the members of the Conselho had been carried through beyond consultation the referring documents the dynamics of functioning of the Conselho. The principal actuations of the CONETUR, the directives tourism public policies already made and directed to implementation, the type of participation at made decision, the principal difficulties of the implementation of the participative administration model of the Plano Nacional do Turismo and the degree of participation of the members of the Conselho at the reunions had been identified. The results had shown that exist some difficulties at the implementation of the participation at the Conselho Estadual de Turismo do Rio Grande do Norte, knowledge of the Conselheiros of CONETUR function, the presence of bodies which doesn t directly connected at the touristy activity; the absence of time of the Conselheiros to be presents at reunions; the discontinuity of the presidency of the Conselho; among others. So, the CONETUR show himself how a Conselho with participative characteristics, but with some adapted needs.
Resumo:
The transformations economical, social and politics in you finish them decades of the century XX brought changes that didn't just limit to the production system. The flexible accumulation took many workers lost her/it their workstations and they look for her/it new survival forms, migrating for administrative activities, of services rendered and for the tourist activity of small and medium load. The State has been investing in the implantation of plans of tourist development in order to create favorable conditions for the reproduction of the tourist activity in Brazil, mainly in the Northeast. A space when it starts to present a predominant economical activity suffers a restructuring in their social and economical relationships. The restructuring of these relationships takes to the construction of a new espacialidade. In the city of Christmas, in Rio Grande do Norte, the neighborhood of Black Tip is the most representative of the public investments for the tourist development. After intense process of tourist urbanization, Black Tip passed interfering in the global context consolidating as the tourist locus in the city. The tourist urbanization of the neighborhood took to the transformation of the space in merchandise that is sold and consumed as such. The recreation of fragments of other cultures brought by social actors, resulting from migratory processes stimulated by the tourist development, it has been presenting ruled social relationships in the informational technology, consumption of global goods and in the fragmentation of the urban space characterized by the internationalization and cosmopolitização. That process has been masking the inequalities partners and cultural as well as the territorial appropriation for an economical elite. The spaces are being appropriate for investors of the tourist section, private investors, agents and real estate producers, where the inequality is not just economical, but also cultural. The local population, mainly of the urban fraction of the Town of Black Tip, it doesn't participate of the productive process in function of the little or any professional qualification and he/she doesn't also have access to the consumption process. To the native ones it remains the fight for the preservation of his/her cultural identity and for the survival
Resumo:
This study intends to establish a relation between environmental degradation, particularly the devastation of the green canopy, and public health. Utilizing a mapping of the trees included in the researched area, each individual tree was analyzed according to its age, taxonomic listing, architecture, shape and size (determined by aesthetic/convenience reasons or deformed by pruning). Initially investigated were the covert reasons lying underneath the constant aggression against trees (which many times seem to contain elements of hatred and contempt) within the urban environment. In addition to that, the aspects concerning environmental modifications and the consequent impact on public health were also assessed. Two main problems promptly emerged as a result of the removal of trees: a) without a canopy to protect the areas, they became subject to winds directly blown from SW Africa and impregnated with aerosol partic les, which are common causes for respiratory disorders and, b) direct UV solar radiation, which causes some types of skin cancers and eye disorders. To reach such results, we studied the origins and formation of UV radiation induced cancers and searched for the UV radiation spectra of action, e.g., usual intensity and quantity reaching clear and shadowed spaces in a certain area and its consequences. In a second instance, we also searched for pertinent data resources in order to confirm the increase of skin cancer cases due to exposure to UV radiation and the relation between the destruction of the green canopy and the above mentioned problems. We believe that a few significant results have been achieved by this study, namely: the relation between a culture based on medieval beliefs and its consequences on the environment; how this culture exploits and deforms nature in pursuit of financial and psychological interests to a point of transforming the landscape into a copy of something devoid of any relation to latitude and altitude; and above all, the indifference concerning the alarming results carried by these modifications