Patologias em fachadas: análises de casos na Universidade Federal do Pará

O sistema de revestimento externo da edificação funciona como camada de proteção e contribui para o bom aspecto da mesma. A fachada está sujeita à ação de agentes de degradação por ser uma das zonas mais expostas do edifício, com a presença de patologia tornando-se responsável por elevados custos de reparos. A pesquisa propõe, como objetivo geral, avaliar patologias que afetem fachadas de edificações de ensino superior da Universidade Federal do Pará, norteada por uma base teórica (revisão bibliográfica) responsável pelas primeiras informações sobre o assunto. Para tal, como metodologia da pesquisa, buscou-se primeiramente realizar levantamento físico de fachadas de 30 edificações na UFPA, identificando em fichas cadastrais os principais mecanismos de degradação. Em seguida, após quantificar/qualificar as anomalias presentes na amostra e apontar a edificação mais crítica com seus principais danos e respectivas causas, listou-se, para esta, medidas básicas de intervenção, visando resolver de modo eficiente o problema decorrente, propondo-se um documento que funcione como suporte técnico para inspeção de fachadas em geral. Utilizou-se também de ensaios para caracterizar amostras, de modo a comprovar as origens daqueles danos em que à primeira vista não se conseguiu identificar a causa. Os resultados permitiram concluir que as edificações analisadas apresentam danos patológicos de diferentes natureza e grau de complexidade, indo desde os mais complexos que necessitaram de ensaios específicos para descobrir sua origem; até os mais simples, que com manutençao programada podem ser eliminado. Conclui-se que grande parte dos danos acontecem por negligência humana, mas que, mesmo dando ênfase na qualidade de execução em fachadas, não há como descartar a hipótese de falhas nem ignorar que o tempo de uso e as ações de fatores externos levam à degradação natural da edificação. Portanto, de modo a evitar o aparecimento precoce de patologias em fachadas, elevando seu tempo de vida útil e reduzindo custos extras, sugere-se, procedimentos de execução baseados em normas técnicas com fiscalização dos mesmos, obedecendo critérios de projeto e apresentando programas de vistorias periódicas para que medidas preventivas sejam tomadas em tempo hábil.

Sincronização de receptoras no diestro para utilização em programa se transferência de embriões em equinos

Pós-graduação em Medicina Veterinária - FMVZ

Exposição neonatal a drogas ototóxicas e possíveis alterações auditivas

Introduction: Scientific evidence indicates that neonatal exposure to ototoxic drugs cause hearing loss in newborns. Objective: To characterize the use of ototoxic antibiotics in newborns (NB), treated in the Neonatal Intensive Care Unit (NICU) and evaluate possible hearing modifications. Methods: A descriptive cross-sectional quantitative approach, using data from medical records of infants who were at some time in the NICU and used antibiotics, including ototoxic, from January to June 2004 as much as 2010, and the data were compared and analyzed. Parents/guardians of infants born in 2004 were contacted and applied a questionnaire containing questions about the children’s hearing. These children were submitted to audiological evaluation. Results: There was significant reduction in the time of use, the amount of antibiotics prescribed to newborns and Vancomycin prescription in 2010 compared to 2004. The hearing tests of 13 born in 2004 showed: sensorineural hearing loss in only 2 (one with moderate hearing loss and descending configuration in pure tone audiometry and the other with bilateral cochlear impairment); audiometric thresholds within the normal range in 11 patients, and the presence of otoacoustic emissions in 9. In Evoked Auditory Brainstem Response (ABR) no changes were observed. Conclusion: The reduction in the time of use, the amount and types of antibiotics observed may be related to the adoption of a Protocol in 2008, by the service. In contrast, auditory alterations may be related to a neonatal exposure to antibiotics in 2004.

Fatores prognósticos para o abandono precoce do tratamento da dependência do álcool, crack e outras drogas em uma comunidade terapêutica

Pós-graduação em Saúde Coletiva - FMB

Influência de diferentes métodos de limpeza sobre a eficiência de corte e as características morfológicas de fresas Carbide

Introduction: Currently, there are many questions regarding the cleaning methods seeking greater efficiency and less loss of burs. Aim: the aim of this study was to evaluate the influence of cleaning methods on the cutting efficiency and morphological characteristics of stainless steel burs tungsten carbide (carbide). Materials and method: Thirty burs were divided into five groups (n = 5) according with the cleaning method: L1 - steel brush, L2 - nylon brush, L3 - ultrasound  +  distilled water, L4 - ultrasound + descaling solution and L5 - no cleaning method (control). The burs were used for the cutting of bovine enamel during six periods of 12 minutes each. After each period, the burs were cleaned (except L5 ) following the protocol established for each group. The cutting efficiency was determined by mass loss and morphological characteristics. Result: The average amount of wear after 72 minutes of use were L1  = 0.3558 g; L2  = 0.4275 g; L3  = 0.4652 g; L4  = 0.4396 g e L5  = 0.4854 g; significant differences in the time of use (p  <  0.001) and cleaning method (p  <  0.001). The L1 group showed the worst performance. Regardless of the experimental group, morphological analysis revealed alterations in the cutting blades soon after the first 12 minutes, being L1 the most affected group. Conclusion: The cleaning with wire brush was the most damaging method to the cutting efficiency and to the morphology of carbide burs.

Reconhecimento da perda de eficácia de protetor intra-auricular

Among the harmful health agents, it is given to the noise, one of the most present in urban and social environments. There are efficient measures to control the noise and the auricular Individual Protection Equipment (IPEa) is the most used. It has been observed the shortage in the comfortable and functional individual auditory protection products, related to durability, face to the efficiency right of the equipment. The main objective of this study was to recognize if there is effectiveness loss toward the used time on the Auditory Equipment, intra-auricular Individual Protection, of foam (3M), model 1110. It has been verified that the equipments suffer efficiency alteration according to the time of use, and the material consuming initiates reliable loss, mainly in audible frequencies going up to 100Hz, and from 16 days for sonorous pressure suffered started in 101dB 20Hz. For sonorous pressure suffered from 107dB to 20Hz, the reliable loss for the usage was of 8 days. The IPEas do not lose effectiveness on important attenuation by the daily use in frequencies from 1KHz until 20KHz. It has been concluded that there is effectiveness loss, according to the daily and frequent use of the IPEa studied.

Influência da infecção pelo HIV e do uso da terapia antirretroviral nas concentrações de selênio, selenometionina e proteção antioxidante

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência da infecção pelo HIV e do uso da terapia antirretroviral nas concentrações de selênio, selenometionina e proteção antioxidante

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Interacción con juguetes para usuarios con discapacidad usando equipos con S.O. Android

El proyecto realizado, trata de una aplicación desarrollada en la plataforma Android, orientada a personas con algún tipo de discapacidad sensorial o psíquica. Dicha aplicación fomenta el uso y la integración de dispositivos móviles en este tipo de sector de población. Está pensada, para que, un usuario con discapacidad, pueda interactuar con ella y de forma transparente a él, se ha creado un sistema mediante el cual, se registra todo el comportamiento que ese usuario ha tenido durante el tiempo de uso de la aplicación, con el fin de llevar un seguimiento del mismo; evaluar si existen cambios en él; determinar si son necesarios algunos cambios en la aplicación que favorezcan una mejoría en cuanto al uso y consecución de resultados en el paciente, etc. Se ha combinado el uso de una aplicación instalada sobre un sistema operativo de libre distribución, concretamente Android, con un juguete de código abierto, como es Sphero. Eso ha permito el desarrollo de una aplicación perfectamente ajustada a los requisitos funcionales definidos, con una robustez y eficiencia similar a una aplicación de sistemas operativos móviles cerrados. Es importarte remarcar, que la primera finalidad de este proyecto es ofrecer la posibilidad de usar un juguete, como Sphero, que está orientado a un sector de población sin discapacidad, haciendo uso de cualquier dispositivo móvil, a personas con diferentes grados de discapacidad sensorial, motora y psíquica. Siempre clarificando, que no existe la posibilidad de usar esta aplicación para cualquier tipo y grado de discapacidad, ya que, ello supondría, un proyecto de una envergadura enorme. El hecho de usar un dispositivo móvil, es un derecho, que todos tenemos. Y por ello, se espera que tras la lectura y comprensión de este proyecto, se motive a los lectores a seguir desarrollando aplicaciones para que cualquier usuario, con discapacidad o no, tenga las mismas oportunidades de interactuación con dispositivos móviles. The carried out project, is an application developed on the Android platform , aimed at people with some kind of sensory or mental disability . This application encourages the use and integration of mobile devices in this type of population sector. It is designed to be interacted by a disable person and transparently to that user, it has been created a system by which all behavior, that user has had during the time of use of the application, is recorded, that’s to keep track of it ; assess whether there are changes in it, determine if changes are needed in the application that favor an improvement in the use and achieving patient outcomes , etc. . It has combined the use of an application installed on an open source operating system, namely Android, an open source toy , as is Sphero . That has made it possible to develop an application perfectly adjusted to the functional requirements defined with a robustness and efficiency similar to a mobile OS application closed. It is important to note, that the first aim of this project is to offer the possibility of using a toy, like Sphero , which is geared to a sector of the population without disabilities , using any mobile device , for people with different degrees of sensory impairment , motor and mental . Always clarifying that there is no possibility to use this application for any type and degree of disability, because the magnitude of the project would have been infinitely greater. The fact of using a mobile device, is a right we all have. And so, it is expected that upon reading and understanding of this project, motivate readers to continue developing applications for any user , disabled or not, have the same opportunities for interaction with mobile devices .

Aplicación distribuida para la monitorización y diagnosis de automóviles

En este proyecto se va desarrollar una aplicación distribuida para la diagnosis y monitorización de automóviles. Se pretende poder realizar estas funciones en prácticamente cualquier automóvil del mercado (con fabricación a partir del año 1996 para el caso de automóviles gasolina y para el año 2000 en el caso de automóviles diésel) de manera remota, aprovechando la conectividad a Internet que actualmente brindan la mayoría de los smartphones. La viabilidad del proyecto reside en la existencia de estándares para la diagnosis de la electrónica del motor. Para poder llevar a cabo esta tarea, se empleará una interfaz de diagnóstico ELM327 bluetooth, que servirá de enlace entre el vehículo y el teléfono móvil del usuario y que a su vez se encargara de enviar los datos que reciba del vehículo a un terminal remoto. De esta manera, se tendrá la aplicación dividida en dos partes: por un lado la aplicación que se ejecuta en el terminal móvil del usuario que actuará como parte servidora, y por el otro la aplicación cliente que se ejecutará en un terminal remoto. También estará disponible una versión de la aplicación servidora para PC. El potencial del proyecto reside en la capacidad de visualización en tiempo real de los parámetros más importantes del motor del vehículo y en la detección de averías gracias a la funcionalidad de lectura de la memoria de averías residente en el vehículo. Así mismo, otras funcionalidades podrían ser implementadas en posteriores versiones de la aplicación, como podría ser el registro de dichos parámetros en una base de datos para su posterior procesado estadístico; de este modo se podría saber el consumo medio, la velocidad media, velocidad máxima alcanzada, tiempo de uso, kilometraje diario o mensual… y un sin fin de posibilidades. ABSTRACT. In this project a distributed application for car monitor and diagnostic is going to be developed. The idea is to be able to connect remotely to almost any car (with production starting in 1996 in the case of petrol engines and production starting in 2000 in case of diesel engines) using the Internet connection available in almost every smartphone. The project is viable because of the existence of standards for engine electronic unit connection. In order to do that, an ELM327 bluetooth interface is going to be used. This interface works as a link between the car and the smartphone, and it is the smartphone which sends the received data from the car to a remote terminal (computer). Thus, the application is divided into two parts: the server which is running on smartphone and the client which is running on a remote terminal. Also there is available a server application for PC. The potential of the project lies in the real-time display data capacity of the most important engine parameters and in the diagnostic capacity based on reading fault memory. In addition, other features could be implemented in later versions of the application, as the capacity of record data for future statistic analysis. By doing this, it is possible to know the average fuel consumption, average speed, maximum speed, time of use, daily or monthly mileage… and an endless number of possibilities.

Coping religioso, resiliência e qualidade de vida de pessoas com HIV/AIDS

Tese (doutorado)—Universidade de Brasília, Instituto de Psicologia, Programa de Pós-Graduação em Processos de Desenvolvimento Humano e Saúde, 2016.

Construção, caracterização e aplicação de eletrodos para descarga por arco de cátodo oco

The system built to characterize electrodes and, consequently, deposited fine films are constituted by a hollow cathode that works to discharges and low pressures (approximately 10-3 to 5 mbar), a source DC (0 to 1200 V), a cylindrical camera of closed borossilicato for flanges of stainless steel with an association of vacuum bombs mechanical and spread. In the upper flange it is connected the system of hollow cathode, which possesses an entrance of gas and two entrances for its refrigeration, the same is electrically isolated of the rest of the equipment and it is polarized negatively. In front of the system of hollow cathode there is a movable sample in stainless steel with possibility of moving in the horizontal and vertical. In the vertical, the sample can vary its distance between 0 and 70 mm and, in the horizontal, can leave completely from the front of the hollow cathode. The sample and also the cathode hollow are equipped with cromel-alumel termopares with simultaneous reading of the temperatures during the time of treatment. In this work copper electrodes, bronze, titanium, iron, stainless steel, powder of titanium, powder of titanium and silício, glass and ceramic were used. The electrodes were investigated relating their geometry change and behavior of the plasma of the cavity of hollow cathode and channel of the gas. As the cavity of hollow cathode, the analyzed aspects were the diameter and depth. With the channel of the gas, we verified the diameter. In the two situations, we investigated parameters as flow of the gas, pressure, current and applied tension in the electrode, temperature, loss of mass of the electrode with relationship at the time of use. The flow of gas investigated in the electrodes it was fastened in a work strip from 15 to 6 sccm, the constant pressure of work was among 2.7 to 8 x 10-2 mbar. The applied current was among a strip of work from 0,8 to 0,4 A, and their respective tensions were in a strip from 400 to 220 V. Fixing the value of the current, it was possible to lift the curve of the behavior of the tension with the time of use. That curves esteem in that time of use of the electrode to its efficiency is maximum. The temperatures of the electrodes were in the dependence of that curves showing a maximum temperature when the tension was maximum, yet the measured temperatures in the samples showed to be sensitive the variation of the temperature in the electrodes. An accompaniment of the loss of mass of the electrode relating to its time of use showed that the electrodes that appeared the spherical cavities lost more mass in comparison with the electrodes in that didn't appear. That phenomenon is only seen for pressures of 10-2 mbar, in these conditions a plasma column is formed inside of the channel of the gas and in certain points it is concentrated in form of spheres. Those spherical cavities develop inside of the channel of the gas spreading during the whole extension of the channel of the gas. The used electrodes were cut after they could not be more used, however among those electrodes, films that were deposited in alternate times and the electrodes that were used to deposit films in same times, those films were deposited in the glass substrata, alumina, stainless steel 420, stainless steel 316, silício and steel M2. As the eletros used to deposit films in alternate time as the ones that they were used to deposit in same times, the behavior of the thickness of the film obeyed the curve of the tension with relationship the time of use of the electrode, that is, when the tension was maximum, the thickness of the film was also maximum and when the tension was minimum, the thickness was minimum and in the case where the value of the tension was constant, the thickness of the film tends to be constant. The fine films that were produced they had applications with nano stick, bio-compatibility, cellular growth, inhibition of bacterias, cut tool, metallic leagues, brasagem, pineapple fiber and ornamental. In those films it was investigated the thickness, the adherence and the uniformity characterized by sweeping electronic microscopy. Another technique developed to assist the production and characterization of the films produced in that work was the caloteste. It uses a sphere and abrasive to mark the sample with a cap impression, with that cap form it is possible to calculate the thickness of the film. Through the time of life of the cathode, it was possible to evaluate the rate of waste of its material for the different work conditions. Values of waste rate up to 3,2 x 10-6 g/s were verified. For a distance of the substratum of 11 mm, the deposited film was limited to a circular area of 22 mm diameter mm for high pressures and a circular area of 75 mm for pressure strip. The obtained films presented thickness around 2,1 µm, showing that the discharge of arch of hollow cathode in argon obeys a curve characteristic of the tension with the time of life of the eletrodo. The deposition rate obtained in this system it is of approximately 0,18 µm/min

Changes in the use of broad-spectrum antibiotics after withdrawal of cefepime from the market: an interrupted time series analysis

Background and objective: Cefepime was one of the most used broad-spectrum antibiotics in Swiss public acute care hospitals. The drug was withdrawn from market in January 2007, and then replaced by a generic since October 2007. The goal of the study was to evaluate changes in the use of broad-spectrum antibiotics after the withdrawal of the cefepime original product. Design: A generalized regression-based interrupted time series model incorporating autocorrelated errors assessed how much the withdrawal changed the monthly use of other broad-spectrum antibiotics (ceftazidime, imipenem/cilastin, meropenem, piperacillin/ tazobactam) in defined daily doses (DDD)/100 bed-days from January 2004 to December 2008 [1, 2]. Setting: 10 Swiss public acute care hospitals (7 with\200 beds, 3 with 200-500 beds). Nine hospitals (group A) had a shortage of cefepime and 1 hospital had no shortage thanks to importation of cefepime from abroad. Main outcome measures: Underlying trend of use before the withdrawal, and changes in the level and in the trend of use after the withdrawal. Results: Before the withdrawal, the average estimated underlying trend (coefficient b1) for cefepime was decreasing by -0.047 (95% CI -0.086, -0.009) DDD/100 bed-days per month and was significant in three hospitals (group A, P\0.01). Cefepime withdrawal was associated with a significant increase in level of use (b2) of piperacillin/tazobactam and imipenem/cilastin in, respectively, one and five hospitals from group A. After the withdrawal, the average estimated trend (b3) was greatest for piperacillin/tazobactam (+0.043 DDD/100 bed-days per month; 95% CI -0.001, 0.089) and was significant in four hospitals from group A (P\0.05). The hospital without drug shortage showed no significant change in the trend and the level of use. The hypothesis of seasonality was rejected in all hospitals. Conclusions: The decreased use of cefepime already observed before its withdrawal from the market could be explained by pre-existing difficulty in drug supply. The withdrawal of cefepime resulted in change in level for piperacillin/tazobactam and imipenem/cilastin. Moreover, an increase in trend was found for piperacillin/tazobactam thereafter. As these changes generally occur at the price of lower bacterial susceptibility, a manufacturers' commitment to avoid shortages in the supply of their products would be important. As perspectives, we will measure the impact of the changes in cost and sensitivity rates of these antibiotics.

Reframing video gaming and internet use addiction : empirical cross-national comparison of heavy use over time and addiction scales among young users

BACKGROUND AND AIMS: Evidence-based and reliable measures of addictive disorders are needed in general population-based assessments. One study suggested that heavy use over time (UOT) should be used instead of self-reported addiction scales (AS). This study compared UOT and AS regarding video gaming and internet use empirically, using associations with comorbid factors. DESIGN: Cross-sectional data from the 2011 French Survey on Health and Consumption on Call-up and Preparation for Defence-Day (ESCAPAD), cross-sectional data from the 2012 Swiss ado@internet.ch study and two waves of longitudinal data (2010-13) of the Swiss Longitudinal Cohort Study on Substance Use Risk Factors (C-SURF). SETTING: Three representative samples from the general population of French and Swiss adolescents and young Swiss men, aged approximately 17, 14 and 20 years, respectively. PARTICIPANTS: ESCAPAD: n =22 945 (47.4% men); ado@internet.ch: n =3049 (50% men); C-SURF: n =4813 (baseline + follow-up, 100% men). MEASUREMENTS: We assessed video gaming/internet UOT ESCAPAD and ado@internet.ch: number of hours spent online per week, C-SURF: latent score of time spent gaming/using internet] and AS (ESCAPAD: Problematic Internet Use Questionnaire, ado@internet.ch: Internet Addiction Test, C-SURF: Gaming AS). Comorbidities were assessed with health outcomes (ESCAPAD: physical health evaluation with a single item, suicidal thoughts, and appointment with a psychiatrist; ado@internet.ch: WHO-5 and somatic health problems; C-SURF: Short Form 12 (SF-12 Health Survey) and Major Depression Inventory (MDI). FINDINGS: UOT and AS were correlated moderately (ESCAPAD: r = 0.40, ado@internet.ch: r = 0.53 and C-SURF: r = 0.51). Associations of AS with comorbidity factors were higher than those of UOT in cross-sectional (AS: .005 ≤ |b| ≤ 2.500, UOT: 0.001 ≤ |b| ≤ 1.000) and longitudinal analyses (AS: 0.093 ≤ |b| ≤ 1.079, UOT: 0.020 ≤ |b| ≤ 0.329). The results were similar across gender in ESCAPAD and ado@internet.ch (men: AS: 0.006 ≤ |b| ≤ 0.211, UOT: 0.001 ≤ |b| ≤ 0.061; women: AS: 0.004 ≤ |b| ≤ 0.155, UOT: 0.001 ≤ |b| ≤ 0.094). CONCLUSIONS: The measurement of heavy use over time captures part of addictive video gaming/internet use without overlapping to a large extent with the results of measuring by self-reported addiction scales (AS). Measuring addictive video gaming/internet use via self-reported addiction scales relates more strongly to comorbidity factors than heavy use over time.

The Use of a Vaginal Conductivity Probe to Influence Calf Sex Ratio via Altered Insemination Time

One hundred eighty-nine mixed breed beef heifers from 13 consignors enrolled in the MACEP heifer development project were utilized in this study. Heifers were synchronized by feeding 0.5 mg melengestrol acetate (MGA) per head per day for 14 days followed by an injection of prostaglandin F2a (PGF2a; 25 mg Lutalyse®) 17 days after the last MGA feeding. Each heifer was fitted with a Heatwatch® transmitter on the morning of PGF2a administration to facilitate detection of estrus. Vaginal conductivity measurements were taken using an Ovatec® probe every 12 hours for 96 hours beginning at the time of PGF2a injection. Heifers randomly assigned to produce a female calf were inseminated near the onset of estrus (as indicated by probe values of £ 55 on the decline). Heifers randomly assigned to produce a male calf were inseminated approximately 24 hours after the onset of estrus (as indicated by probe values of ³ 60 on the incline). All heifers not inseminated by 96 hours after PGF2a were mass inseminated in an attempt to impregnate as many heifers as possible. Heifers that were diagnosed as pregnant as a result of the artificial insemination were subjected to ultrasonography for fetal sex determination. Only 70 of the 189 heifers (37.0%) exhibited estrus according to Heatwatch® and incidence of estrus was influenced by heifer average daily gain, reproductive tract score, and disposition score. Heifers receiving a disposition score of 3 (78.7) had a higher (P<.05) probe reading at AI than those receiving a disposition score of 1 or 2 (70.8 and 72.5, respectively). Heifers with probe readings at insemination of 80 - 84 and > 84 had lower (P<.05) pregnancy rates to AI (13.6 and 0.0%, respectively) than heifers with probe readings in the ranges of < 60, 60 - 64, 65 - 69, 70 - 74, and 75 - 79 (35.7, 40.9, 31.4, 35.3, and 26.9% respectively). Heifers that were bred when probe values were increasing had a lower (P<.05) percentage of male fetuses (34.4%) than those bred during a period of decreasing probe values (69.2% male fetuses). These results demonstrate that a vaginal conductivity probe may be a useful tool to determine an insemination time that could potentially alter calf sex ratio.