Remembering the future : Warlpiri life through the prism of drawing

As well as the truths the drawings might speak, The book concerns itself with the beguiling questions that remain unanswered and the limits of scholarship.

Effect of solvent treatment on morphology, crystallinity and tensile properties of cellulose acetate nanofiber mats

Aligned nanofiber mats were prepared from cellulose acetate using an electrospinning technique. The nanofiber mats were then immersed in an ethanol/acetone mixture. The solvent treatment led to denser, more compact fibrous structure and slight decrease in fiber alignment. It increased fiber diameter and polymer crystallinity within fibers. These effects resulted in increase in the tensile strength of fibrous mats. Solvent treatment may offer a simple, efficient approach to improve the mechanical strength of nanofibrous mats.

In situ synchrotron X-ray diffraction studies of the effect of microstructure on tensile behavior and retained austenite stability of thermo-mechanically processed transformation induced plasticity steel

Transmission electron microscopy and in situ synchrotron high-energy X-ray diffraction were used to investigate the martensitic transformation and lattice strains under uniaxial tensile loading of Fe-Mn-Si-C-Nb-Mo-Al Transformation Induced Plasticity (TRIP) steel subjected to different thermo-mechanical processing schedules. In contrast with most of the diffraction analysis of TRIP steels reported previously, the diffraction peaks from the martensite phase were separated from the peaks of the ferrite-bainite α-matrix. The volume fraction of retained γ-austenite, as well as the lattice strain, were determined from the diffraction patterns recorded during tensile deformation. Although significant austenite to martensite transformation starts around the macroscopic yield stress, some austenite grains had already experienced martensitic transformation. Hooke's Law was used to calculate the phase stress of each phase from their lattice strain. The ferrite-bainite α-matrix was observed to yield earlier than austenite and martensite. The discrepancy between integrated phase stresses and experimental macroscopic stress is about 300 MPa. A small increase in carbon concentration in retained austenite at the early stage of deformation was detected, but with further straining a continuous slight decrease in carbon content occurred, indicating that mechanical stability factors, such as grain size, morphology and orientation of the retained austenite, played an important role during the retained austenite to martensite transformation.

The drawing bazaar

Es sorprendente y paradójica la progresiva reducción de la relevancia sufrida por el dibujo en el ámbito de la enseñanza universitaria en las escuelas de arquitectura a lo largo de las últimas décadas. Digo sorprendente, porque es precisamente el dibujo el lenguaje que permite al arquitecto hacer inteligible su propuesta, tanto a sí mismo como a otros. Y digo paradójica, porque esta restricción lingüística con la que se castiga a los estudiantes de arquitectura se produce en el momento histórico en que las opciones y recursos gráficos a su disposición son máximos. La tecnología digital ha ampliado de manera exponencial el ya de por sí amplísimo vocabulario del dibujo tradicional. Sin embargo, esta ilusionante expansión del universo del lenguaje del dibujo, no se ha visto reflejada en una adaptación de la formación universitaria de características similares. The Drawing Bazaar es el compendio de muchos años de esfuerzo por parte de los autores por proporcionar a sus alumnos de la Universidad Europea de Madrid una solución a esta sorprendente paradoja a la que se enfrentaban, quizá sin ser siquiera completamente conscientes de ello. Para ello han estructurado un libro denso y complejo, con múltiples capas de lectura superpuestas que permiten desde el simple paseo, consulta y disfrute de dibujos de excelentes comunicadores gráficos, arquitectos y no arquitectos, hasta el análisis detallado y experto de las más particulares, eficaces y persuasivas estrategias plásticas.

Introduction: the drawing bazaar

Introduction to the research book explaining the reasons behind the need of this publication in the context of architectural education, highlighting the double value of drawing for architects: instrumental as a fundamental tool that qualifies the design process; and autonomous, contemplating the drawing of the architect as a final product in itself beyond the mere illustration and documentation of the project of architecture.

A gallery walk: 'drawing out' understandings of collaborative self-study in teacher education

The Collaborative Reflective Experience and Practice in Education (CREPE) Research Group formed mid 2014 as a group of eight teacher educators interested in working collaboratively to improve our teaching practice through self-study methodology. Located at distance across the three campuses of Deakin University in Victoria, Australia and from the disciplines of mathematics, science, visual arts, performing arts, and curriculum and pedagogy, we aimed to better understand, improve, and share our practices as teacher-educators. While a few of us had engaged in self-study previously, all were comfortable with observing some kind of professional reflective/reflexive practice. We shared the intention of engaging in the scholarship (teaching practice and research) of self-study methodology via community of practice approaches, focusing on our collaborative (overarching) research as well as engaging in focused research simultaneously. It is our efforts towards collaborative research that are the subject of this chapter.

Gold Science Ghost Drawing #1

Mixed media. 78" x 56", Gold Science Ghost Drawings Series.

Gold Science Ghost Drawing #2

Mixed media. 67" x 50", Gold Science Ghost Drawings Series.

Gold Science Ghost Drawing #5

Mixed media. 105½" x 42", Gold Science Ghost Drawings Series. Private Collection

Ethos and Ideology of Knowledge Organization: Toward Precepts for and Engaged Knowledge Organization Drawing on The Arts and Crafts Movement, Critical Theory, and Žižek

Ethos is the spirit that motivates ideas and practices. When we talk casually about the ethos of a town, state, or country we are describing the fundamental or at least underlying rationale for action, as we see it. Ideology is a way of looking at things.It is the set of ideas that constitute one’s goals, expectations, and actions. In this brief essay I want to create a space where we might talk about the ethos and ideology in knowledge organization from a particular point of view; combining ideas and inspiration from the Arts and Crafts movement of the early Twentieth Century, critical theory in extant knowledge organization work, the work of Slavoj Žižek, and the work of Thich Nhat Hahn on Engaged Buddhism.I will expand more below, but we can say here and now that there are many open questions about ethos and ideology in and of knowledge organization, both its practice and products. Many of them in classification, positioned as they are around identity politics of race, gender, and other marginalized groups, ask the classificationist to be mindful of the choice of terms and relationships between terms. From this work we understand that race and gender requires special consideration, which manifests as a particular concern for the form of representation inside extant schemes. Even with these advances in our understanding there are still other categories about which we must make decisions and take action. For example, there are ethical decisions about fiduciary resource allocation, political decisions about standards adoption, and even broader zeitgeist considerations like the question of Fordist conceptions (Day, 2001; Tennis 2006) of the mechanics of description and representation present in much of today’s practice.Just as taking action in a particular way is an ethical concern, so too is avoiding a lack of action. Scholars in Knowledge Organization have also looked at the absence of what we might call right action in the context of cataloguing and classification. This leads to some problems above, and hints at larger ethical concerns of watching a subtle semantic violence go on without intervention (Bowker and Star, 2001; Bade 2006).The problem is not to act or not act, but how to act or not act in an ethical way, or at least with ethical considerations. The action advocated by an ethical consideration for knowledge organization is an engaged one, and it is here where we can take a nod from contemporary ethical theory advanced by Engaged Buddhism. In this context we can see the manifestation of fourteen precepts that guide ethical action, and warn against lack of action.

Predictions of J integral and tensile strength of clay/epoxy nanocomposites material using phase field model

We predict macroscopic fracture related material parameters of fully exfoliated clay/epoxy nano- composites based on their fine scale features. Fracture is modeled by a phase field approach which is implemented as user subroutines UEL and UMAT in the commercial finite element software Abaqus. The phase field model replaces the sharp discontinuities with a scalar damage field representing the diffuse crack topology through controlling the amount of diffusion by a regularization parameter. Two different constitutive models for the matrix and the clay platelets are used; the nonlinear coupled system con- sisting of the equilibrium equation and a diffusion-type equation governing the phase field evolution are solved via a NewtoneRaphson approach. In order to predict the tensile strength and fracture toughness of the clay/epoxy composites we evaluated the J integral for different specimens with varying cracks. The effect of different geometry and material parameters, such as the clay weight ratio (wt.%) and the aspect ratio of clay platelets are studied.

NIR spectrocospy can evaluate the crystallinity and the tensile and burst strenghts of nanocellulosic films.

The near infrared (NIR) spectroscopy presents itself as an interesting non-destructive test tool as it enables a fast, simple and reliable way for characterizing large samplings of biological materials in a short period of time. This work aimed to establish multivariate models to estimate the crystallinity indices and tensile and burst strength of cellulosic and nanocellulosic films through NIR spectroscopy. NIR spectra were recorded from the films before tensile and bursting strength, and crystallinity tests. Spectral information were correlated with reference values obtained by laboratory procedures through partial least square regression (PLS-R). The PLS-R model for estimating the crystallinity index presented a coefficient of determination in cross-validation (R2cv) of 0,94 and the ratio of performance to deviation (RPD) was 3,77. The mechanical properties of the films presented a high correlation with the NIR spectra: R2p = 0,85 (RPD = 2,23) for tensile and R2p = 0,93 (RPD = 3,40) for burst strength. The statistics associated to the models presented have shown that the NIR spectroscopy has the potential to estimate the crystallinity index and resistance properties of cellulose and nanocellulose films on in-line monitoring systems.

Experimental studies on comparison of microwave curing and thermal curing of epoxy resins used for alternative mould materials

In this present work attempts have been made to study the glass transition temperature of alternative mould materials by using both microwave heating and conventional oven heating. In this present work three epoxy resins, namely R2512, R2515 and R2516, which are commonly used for making injection moulds have been used in combination with two hardeners H2403 and H2409. The magnetron microwave generator used in this research is operating at a frequency of 2.45 GHz with a hollow rectangular waveguide. In order to distinguish the effects between the microwave and conventional heating, a number of experiments were performed to test their mechanical properties such as tensile and flexural strengths. Additionally, differential scanning calorimeter technique was implemented to measure the glass transition temperature on both microwave and conventional heating. This study provided necessary evidences to establish that microwave heated mould materials resulted with higher glass transition temperature than the conventional heating. Finally, attempts were also made to study the microstructure of microwave-cured materials by using a scanning electron microscope in order to analyze the morphology of cured specimens.

Public internet access revisited

In recent years the Australian government has dedicated considerable project funds to establish public Internet access points in rural and regional communities. Drawing on data from a major Australian study of the social and economic impact of new technologies on rural areas, this paper explores some of the difficulties rural communities have faced in setting up public access points and sustaining them beyond their project funding. Of particular concern is the way that economic sustainability has been positioned as a measure of the success of such ventures. Government funding has been allocated on the basis of these rural public access points becoming economically self-sustaining. This is problematic on a number of counts. It is therefore argued that these public access points should be reconceptualised as essential community infrastructure like schools and libraries, rather than potential economic enterprises. Author Keywords: Author Keywords: Internet; Public access; Sustainability; Digital divide; Rural Australia