999 resultados para technological characterization
Resumo:
Vibrio parahaemolyticus is a marine bacterium, responsible for gastroenteritis in humans. Most of the clinical isolates produce thermostable direct hemolysin (TDH) and TDH-related hemolysin (TRH) encoded by tdh and trh genes respectively. In this study, twenty-three V. parahaemolyticus, previously isolated from oysters and mussels were analyzed by PCR using specific primers for the 16S rRNA and virulence genes (tdh, trh and tlh) and for resistance to different classes of antibiotics and PFGE. Nineteen isolates were confirmed by PCR as V. parahaemolyticus. The tlh gene was present in 100% of isolates, the tdh gene was identified in two (10.5%) isolates, whereas the gene trh was not detected. Each isolate was resistant to at least one of the nine antimicrobials tested. Additionally, all isolates possessed the blaTEM-116 gene. The presence of this gene in V. parahaemolyticus indicates the possibility of spreading this gene in the environment. Atypical strains of V. parahaemolyticus were also detected in this study.
Resumo:
The molluscicidal activity of Bauhinia variegata leaf and Mimusops elengi bark was studied against vector snail Lymnaea acuminata. The toxicity of both plants was time and concentration-dependent. Among organic extracts, ethanol extracts of both plants were more toxic. Toxicity of B. variegata leaf ethanolic extract (96h LC50- 14.4 mg/L) was more pronounced than M. elengi bark ethanolic extract (96h LC50-15.0 mg/L). The 24h LC50 of column purified fraction of B. variegata and M. elengi bark were 20.3 mg/L and 18.3 mg/L, respectively. Saponin and quercetin were characterized and identified as active molluscicidal component. Co-migration of saponin (Rf 0.48) and quercetin (Rf 0.52) with column purified bark of M. elengi and leaf of B. variegata on thin layer chromatography demonstrate same Rf value i.e. 0.48 and 0.52, respectively. The present study clearly indicates the possibility of using M. elengi and/or B. variegata as potent molluscicide.
Resumo:
A crescente necessidade de meios de inspecção e recolha de informação de infraestruturas e do meio ambiente natural, origina o recurso a meios tecnológicos cada vez mais evoluídos. Neste contexto, os robôs móveis autónomos aéreos surgem como uma ferramenta importante. Em particular, os veículos aéreos de asa móvel, pela sua manobrabilidade e controlo podem-se utilizar eficazmente em meios complexos como cenários interiores onde o ambiente é parcialmente controlado. A sua utilização em coordenação com outros veículos robóticos móveis e em particular com a crescente autonomia de decisão, permitem uma eficiência elevada, por exemplo, em tarefas de recolha automática de informação, vigilância, apoio a comunicações, etc. A inexistência de um veículo autónomo de asa móvel no cenário multi-robótico desenvolvido pelo Laboratório de Sistemas Autónomos do Instituto Superior de Engenharia do Porto, aliada às suas aplicações referidas, criou a necessidade do desenvolvimento de um veículo desta gama. Identificou-se, pois, o desenvolvimento de um veículo autónomo aéreo do tipo quadrotor com capacidade de vôo base estabilizado como o problema a resolver. Foi efectuado um levantamento de requisitos do sistema, a caracterização de um veículo autónomo aéreo Vertical Take-off and Landing - VTOL, e efectuado um trabalho de pesquisa a fim de possibilitar o conhecimento das técnicas e tecnologias envolvidas. Tendo em vista o objectivo de controlo e estabilização do veículo, foi efectuada a modelização do sistema que serviu não só para a melhor compreensão da sua dinâmica mas também para o desenvolvimento de um simulador que possibilitou a validação de estratégias de controlo e avaliação de comportamentos do veículo para diferentes cenários. A inexistência de controladores de motores brushless adequada (frequência de controlo), originou o desenvolvimento de um controlador dedicado para motores brushless, motores esses utilizados para a propulsão do veículo. Este controlador permite uma taxa de controlo a uma frequência de 20KHz, possui múltiplas interfaces de comunicação (CAN, RS232, Ethernet, SPI e JTAG), é de reduzido peso e dimensões e modular, visto ter sido implementado em dois módulos, i.e., permite a sua utilização com diferentes interfaces de potência. Projectou-se um veículo autónomo aéreo em termos físicos com a definição da sua arquitectura de hardware e software bem como o sistema de controlo de vôo. O sistema de estabilização de vôo compreende o processamento de informação fornecida por um sistema de navegação inercial, um sonar e o envio de referências de velocidade para cada um dos nós de controlo ligados a um barramento CAN instalado no veículo. A implementação do veículo foi alcançada nas suas vertentes mecânica, de hardware e software. O UAV foi equipado com um sistema computacional dotando-o de capacidades para o desempenho de tarefas previamente analisadas. No presente trabalho, são também tiradas algumas conclusões sobre o desenvolvimento do sistema e sua implementação bem como perspectivada a sua evolução futura no contexto de missões coordenadas de múltiplos veículos robóticos.
Resumo:
This work aimed to assess pathogenic potential and clonal relatedness of Aeromonas sp. and Vibrio cholerae isolates recovered during a diarrhea outbreak in Brazil. Clinical and environmental isolates were investigated for the presence of known pathogenic genes and clonal relatedness was assessed by intergenic spacer region (ISR) 16S-23S amplification. Four Aeromonas genes (lip, exu, gcat, flaA/B) were found at high overall frequency in both clinical and environmental isolates although the lip gene was specifically absent from selected species. A fifth gene, aerA, was rarely found in A. caviae, the most abundant species. The ISR profile revealed high heterogeneity among the Aeromonas isolates and no correlation with species identification. In contrast, in all the V. cholerae isolates the four genes investigated (ctxA, tcpA, zot and ace) were amplified and revealed homogeneous ISR and RAPD profiles. Although Aeromonas isolates were the major enteric pathogen recovered, their ISR profiles are not compatible with a unique cause for the diarrhea events, while the clonal relationship clearly implicates V. cholerae in those cases from which it was isolated. These results reinforce the need for a better definition of the role of aeromonads in diarrhea and whether they benefit from co-infection with V. cholerae.
Resumo:
Cryptosporidium spp. and Cystoisospora belli are monoxenic protozoa that have been recognized as the causative agents of chronic diarrhea in immunocompromised individuals, especially HIV-infected subjects. The objective of this study was to evaluate the frequency of these intestinal protozoa in HIV-positive patients in the Triângulo Mineiro region of Brazil and to correlate the presence of these infections with clinical, epidemiological and laboratory data of the patients. Oocysts were detected in stool samples of 10 (16.9%) of the 59 patients studied, while Cryptosporidium spp. were present in 10.1% (6/59) and C. belli in 6.7% (4/59). The frequency of these parasites was higher among patients with diarrheic syndrome and CD4+ T lymphocyte counts < 200 cells/mm 3 , demonstrating the opportunistic characteristic of these infections. A significant association was observed between the lack of adherence to antiretroviral therapy and the presence of Cryptosporidium spp. and/or C. belli. Parasitism with Cryptosporidium spp. was more frequent in February and April, the months following the period of high rainfall. The same was not observed for C. belli. Genetic characterization of two isolates led to the identification of Cryptosporidium parvum, one of the main species associated with the zoonotic transmission of cryptosporidiosis.
Resumo:
SUMMARY The molluscicidal activity of the leaf powder of Moringa oleifera and lyophilized fruit powder of Momordica charantia against the snail Lymnaea acuminata was time and concentration dependent. M. oleifera leaf powder (96 h LC50: 197.59 ppm) was more toxic than M. charantia lyophilized fruit powder (96 h LC50: 318.29 ppm). The ethanolic extracts of M. oleifera leaf powder and Momordica charantia lyophilized fruit powder were more toxic than other organic solvent extracts. The 96 h LC50 of the column purified fraction of M. oleifera leaf powder was 22.52 ppm, while that of M. charantia lyophilized fruit powder was 6.21 ppm. Column, thin layer and high performance liquid chromatography analysis show that the active molluscicidal components in M. oleifera leaf powder and lyophilized fruit of M. charantia are benzylamine (96 h LC50: 2.3 ppm) and momordicine (96 h LC50: 1.2 ppm), respectively. Benzylamine and momordicine significantly inhibited, in vivo and in vitro, the acetylcholinesterase (AChE), acid and alkaline phosphatase (ACP/ALP) activities in the nervous tissues of L. acuminata. Inhibition of AChE, ACP and ALP activity in the nervous tissues of L. acuminata by benzylamine and momordicine may be responsible for the molluscicidal activity of M. oleifera and M. charantia fruits, respectively.
Resumo:
In February 2012, an outbreak of respiratory illness occurred on the cruise ship MSC Armonia in Brazil. A 31-year-old female crew member was hospitalized with respiratory failure and subsequently died. To study the etiology of the respiratory illness, tissue taken at necropsy from the deceased woman and respiratory specimens from thirteen passengers and crew members with respiratory symptoms were analyzed. Influenza real-time RT-PCR assays were performed, and the full-length hemagglutinin (HA) gene of influenza-positive samples was sequenced. Influenza B virus was detected in samples from seven of the individuals, suggesting that it was the cause of this respiratory illness outbreak. The sequence analysis of the HA gene indicated that the virus was closely related to the B/Brisbane/60/2008-like virus, Victoria lineage, a virus contained in the 2011-12 influenza vaccine for the Southern Hemisphere. Since the recommended composition of the influenza vaccine for use during the 2013 season changed, an intensive surveillance of viruses circulating worldwide is crucial. Molecular analysis is an important tool to characterize the pathogen responsible for an outbreak such as this. In addition, laboratory disease surveillance contributes to the control measures for vaccine-preventable influenza.
Resumo:
A cross-sectional study on prevalence, associated factors and genotype distribution of HCV infection was conducted among 848 HIV-infected patients recruited at reference centers in the Midwest Region of Brazil. The prevalence rate of HIV-HCV coinfection was 6.9% (95% CI: 5.2 to 8.6). In multivariable analysis, increasing age, use of illicit drugs (injection and non-injection), a history of blood transfusion before 1994, and the absence of a steady partnership were significant independent associated factors for HIV-HCV coinfection. The phylogenetic analysis based on the NS5B region revealed the presence of two major circulating genotypes of HCV: genotypes 1 (58.3%) and 3 (41.7%). The prevalence of HIV-HCV coinfection was lower than those reported in studies conducted with HIV-infected patients in different regions of Brazil, due to the fact that illicit drug use is not a frequent mode of HIV transmission in this region of Brazil. Serologic screening of HIV-patients for HCV before initiating antiretroviral treatment, a comprehensive identification of associated factors, and the implementation of effective harm reduction programs are highly recommended to provide useful information for treatment and to prevent HCV coinfection in these patients.
Resumo:
Hoje em dia, e com os avanços tecnológicos a surgirem de forma constante, existem novas áreas que têm de ser consideradas com um foco importante por parte de todas as organizações, sendo uma delas a robótica industrial. Motivada em aumentar o seu output, as condições de trabalho para os seus colaboradores, bem como todas as condições de organização da logística interna, a Grohe Portugal, mais especificamente o departamento da montagem, achou relevante fazer um estudo de métodos e tempos, calculando os ganhos potenciais de aumento de output com introdução de robótica nas linhas dos cartuchos. Os objetivos principais seriam então, fazer uma restruturação de todo o layout dessas linhas, tendo como foco automatizar alguma(s) operação(ões), conseguindo assim uma melhoria significativa do output dessas linhas com o menor payback possível. Posto isto, esta dissertação pretende apresentar o trabalho desenvolvido junto da Grohe Portugal, que teve como objetivo fazer os estudos e a automatização de linhas de montagem de cartuchos, bem como melhorar algumas linhas de montagem tendo em conta fatores ergonómicos. Relativamente à automatização da linha dos cartuchos, foi importante estudar todos os seguintes aspetos: utilização de unidades robóticas; ergonomia; ganhos de produtividade; automatizar ou semi-automatizar operações; simplificar processos de montagem; simplificar setups; solicitar orçamentos; elaborar caderno de encargos. Para a realização deste projeto, o trabalho desenvolvido foi decomposto em várias etapas, entre as quais se destacam: análise e estudo dos métodos e sequências de montagem; levantamento de todos os componentes e operações de montagem até à obtenção do cartucho final; estudo de tempos de todas essas operações de montagem; caraterização de um novo layout para as linhas com a introdução de unidades robóticas, tanto quanto possível, mais adequadas; elaboração de caderno de encargos para ser enviado a empresas, para estas poderem apresentar uma orçamentação, bem como indicar as unidades robóticas mais adequadas para as tarefas pretendidas; automatização da linha dos cartuchos. Relativamente ao projeto de novas linhas de montagem tendo em conta fatores ergonómicos, de forma a melhorar os sistemas de abastecimento e as condições de trabalho por parte dos operadores, foram postos em prática diferentes passos, nomeadamente: identificação de todos os processos de montagem realizados pelos operadores na linha a melhorar; estudo e definição da disposição dos componentes na nova linha, bem como a sua forma de abastecimento; projeto da nova linha de montagem em 3D com recurso ao software SolidWorks; realização prática da linha, acompanhando e ajudando a equipa da ferramentaria. O balanço final do trabalho foi bastante positivo, tanto na automatização das linhas de montagem dos cartuchos, em que todo o seu estudo foi alcançado com sucesso, como no melhoramento ergonómico das linhas de montagem, tendo-se alcançado melhorias em alguns índices de qualidade, tempos de abastecimento, organização das linhas, e nas condições de iluminação, resultando essas melhorias numa avaliação positiva por parte dos colaboradores que nelas trabalham todos os dias.
Resumo:
Dissertação para obtenção do Grau de Mestre em Engenharia Biomédica
Resumo:
Context and objective:The molecular characterization of local isolates of Toxoplasma gondii is considered significant so as to assess the homologous variations between the different loci of various strains of parasites.Design and setting:The present communication deals with the molecular cloning and sequence analysis of the 1158 bp entire open reading frame (ORF) of surface antigen 3 (SAG3) of two Indian T. gondii isolates (Chennai and Izatnagar) being maintained as cryostock at the IVRI.Method:The surface antigen 3 (SAG3) of two local Indian isolates were cloned and sequenced before being compared with the available published sequences.Results:The sequence comparison analysis revealed 99.9% homology with the standard published RH strain sequence of T. gondii. The strains were also compared with other established published sequences and found to be most related to the P-Br strain and CEP strain (both 99.3%), and least with PRU strain (98.4%). However, the two Indian isolates had 100% homology between them.Conclusion:Finally, it was concluded that the Indian isolates were closer to the RH strain than to the P-Br strain (Brazilian strain), the CEP strain and the PRU strains (USA), with respect to nucleotide homology. The two Indian isolates used in the present study are known to vary between themselves, as far as homologies related to other genes are concerned, but they were found to be 100% homologous as far as SAG3 locus is concerned. This could be attributed to the fact that this SAG3 might be a conserved locus and thereby, further detailed studies are thereby warranted to exploit the use of this particular molecule in diagnostics and immunoprophylactics. The findings are important from the point of view of molecular phylogeny.
Resumo:
Introduction:American tegumentary leishmaniasis (ATL) can be caused by Leishmania (Viannia) braziliensis complex. The evolution of ATL initially results in lesions and can develop into disseminated or diffuse forms. The genetic diversity of L. (V.) braziliensis in some endemic areas of Brazil has been poorly studied, such as in the state of São Paulo. This study analyzed the genetic diversity of L. (V.) braziliensis isolates collected from patients and dogs with LTA from the state of São Paulo.Methods:Leishmaniasis diagnosis was determined by PCR. The 132 biopsies were collected in different regions of Sao Paulo State, Brazil (36 municipalities). The genetic characterization of L. (V.) braziliensis isolates was tested by RFLP-PCR using DNA extracted from biopsies. The primer set amplified a specific region of Leishmania internal transcribed spacers of the ribosomal DNA locus.Results:Of the 132 samples, 52 (40%) were completely genotyped by RFLP-PCR (44 from human patients and eight from dogs). The results showed nine distinct patterns. The majority of the genotyped samples were from Sorocaba (30), and the others were distributed among 14 other municipalities. The first pattern was more frequent (29 samples), followed by pattern 2 (nine samples) and pattern 3 (three samples). Patterns 4, 6, 7, 8 and 9 were composed of two samples each and pattern 5 of one sample.Conclusion:These results suggest that polymorphic strains of L. (V.) braziliensis circulate in the state of São Paulo. These data agree with studies from other regions of Brazil, showing great variability among the natural populations of endemic foci.
Resumo:
SUMMARY Sporothrix schenckiiwas reclassified as a complex encompassing six cryptic species, which calls for the reassessment of clinical and epidemiological data of these new species. We evaluated the susceptibility of Sporothrix albicans (n = 1) , S. brasiliensis (n = 6) , S. globosa (n = 1), S. mexicana(n = 1) and S. schenckii(n = 36) to terbinafine (TRB) alone and in combination with itraconazole (ITZ), ketoconazole (KTZ), and voriconazole (VRZ) by a checkerboard microdilution method and determined the enzymatic profile of these species with the API-ZYM kit. Most interactions were additive (27.5%, 32.5% and 5%) or indifferent (70%, 50% and 52.5%) for TRB+KTZ, TRB+ITZ and TRB+VRZ, respectively. Antagonisms were observed in 42.5% of isolates for the TRB+VRZ combination. Based on enzymatic profiling, the Sporothrix schenckii strains were categorized into 14 biotypes. Leucine arylamidase (LA) activity was observed only for S. albicans and S. mexicana. The species S. globosaand S. mexicanawere the only species without β-glucosidase (GS) activity. Our results may contribute to a better understanding of virulence and resistance among species of the genus Sporothrixin further studies.
Resumo:
SUMMARY In this study, Leishmaniaspecies were identified by Polymerase Chain Reaction (PCR). The epidemiology of patients suspected of having American Cutaneous Leishmaniasis in the municipality of Assis Brasil, Acre State, located in the Brazil/Peru/Bolivia triborder was also investigated. By PCR, the DNA of Leishmaniawas detected in 100% of the cases (37 samples) and a PCR-Restriction Fragment Length Polymorphism (RFLP) of the hsp 70gene identified the species in 32 samples: Leishmania (Viannia) braziliensis (65.6%) , L. (V.) shawi (28.1%) , L. (V.) guyanensis (3.1%) and mixed infection L. (V.) guyanensis and L. (Leishmania) amazonensis (3.1%)This is the first report of L. (V.) shawiand L. (L.) amazonensis in Acre. The two predominant species were found in patients living in urban and rural areas. Most cases were found in males living in rural areas for at least three years and involved in rural work. This suggests, in most cases, a possible transmission of the disease from a rural/forest source, although some patients had not engaged in activities associated with permanence in forestall areas, which indicate a possible sandflies adaptation to the periurban setting.
Resumo:
Optical immersion clearing is a technique that has been widely studied for more than two decades and that is used to originate a temporary transparency effect in biological tissues. If applied in cooperation with clinical methods it provides optimization of diagnosis and treatment procedures. This technique turns biological tissues more transparent through two main mechanisms — tissue dehydration and refractive index (RI) matching between tissue components. Such matching is obtained by partial replacement of interstitial water by a biocompatible agent that presents higher RI and it can be completely reversible by natural rehydration in vivo or by assisted rehydration in ex vivo tissues. Experimental data to characterize and discriminate between the two mechanisms and to find new ones are necessary. Using a simple method, based on collimated transmittance and thickness measurements made from muscle samples under treatment, we have estimated the diffusion properties of glucose, ethylene glycol (EG) and water that were used to perform such characterization and discrimination. Comparing these properties with data from literature that characterize their diffusion in water we have observed that muscle cell membrane permeability limits agent and water diffusion in the muscle. The same experimental data has allowed to calculate the optical clearing (OC) efficiency and make an interpretation of the internal changes that occurred in muscle during the treatments. The same methodology can now be used to perform similar studies with other agents and in other tissues in order to solve engineering problems at design of inexpensive and robust technologies for a considerable improvement of optical tomographic techniques with better contrast and in-depth imaging.