Prevalence Of Shear Banding In Compression Of Zr41Ti14Cu12.5Ni10Be22.5 Pillars As Small As 150 Nm In Diameter

Recently, the size dependence of mechanical behaviors, particularly the yield strength and plastic deformation mode, of bulk metallic glasses (BMG) has created a great deal of interest. Contradicting conclusions have been drawn by different research groups, based on various experiments on different BMG systems. Based on in situ compression transmission electron microscopy (TEM) experiments on Zr41Ti14Cu12.5Ni10Be22.5 (Vit 1) nanopillars, this paper provides strong evidence that shear banding still prevails at specimen length scales as small as 150 nm in diameter. This is supported by in situ and ex situ images of shear bands, and by the carefully recorded displacement bursts under load control its well as load drops under displacement control. Finite element modeling of the stress state within the pillar shows that the unavoidable geometry constraints accompanying such experiments impart a strong effect on the experimental results, including non-uniform stress distributions and high level hydrostatic pressures. The seemingly improved compressive ductility is believed to be due to such geometry constraints. Observations underscore the notion that the mechanical behavior of metallic glasses, including strength and plastic deformation mode, is size independent at least in Vit 1. (C) 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

The Siem Reap Meet Proceedings: Asserting Rights, Defining Responsibilities: Perspectives from Small-scale Fishing Communities on Coastal and Fisheries Management in Asia

This publication is a record of the proceedings of the Siem Reap Workshop and Symposium. It provides a bottom-up perspective on how rights are understood, and what rights are seen as important by small-scale fishing communities, if they are to fulfil their responsibilities for managing resources in a sustainable and equitable manner. It is hoped that these proceedings, and the Statement from the Workshop-the Siem Reap Statement-are found useful by those engaged in policy making and advocacy in support of small-scale fisheries, as well as researchers, non-governmental organizations (NGOs), fishworker organizations, and multilateral and regional organizations

The Zanzibar Workshop Proceedings: Asserting Rights, Defining Responsibilities:Perspectives from Small-scale Fishing Communities on Coastal and Fisheries Management in Eastern and Southern Africa

The Zanzibar Workshop Proceedings consists of the report and the Statement of the Workshop and provides a rich understanding of the dynamics of traditional, indigenous, small-scale and artisanal fisheries and fishing communities in the Eastern and Southern African (ESA) context. The issues covered include: the saga of rights denied to coastal lands, fishing, and threats to livelihood arising from lack of recognition of traditional rights and the livelihood needs of people in the region; the aspirations of coastal and inland communities to maintain or improve their livelihoods; and a bottom-up perspective on access rights to fishing, post-harvest rights and economic and social rights. This report will be a valuable source of information for community organizers, trade union leaders, government officials and the donor community, including multilateral organizations, researchers and for all those who are interested in the well-being of ESA fishing communities.

Small-scale fisheries development in Nigeria: Status, prospects, constraints/recommended solutions

The small-scale fisheries sector has been contributing immensely towards domestic fish production in Nigeria. Despite considerable contributions by the small-scale fisherman of Nigeria, with few exceptions, they continue to live at the margin of subsistence. This paper attempts to review the sector and propose strategies of integrated approach towards small-scale fisheries development in order to ensure that efforts at improving the rural fisheries succeed in over-coming identified constraints which include socio-cultural, political, economic, technological and other barriers

Small scale commercial production of tilapia fingerlings in floating bamboo net-hapas

The inadequate supply of tilapia seed is considered as one of the major present constraints to the development of the culture industry in Nigeria. The floating bamboo net-hapa hatchery/nursery system was observed to be very efficient in the mass production of tilapia (Oreochromis niloticus) fry and fingerlings at Kainji Lake Research Institute. This system was therefore, recommended for small-scale (artisanal) commercial operators consisting of fishermen families in order to increase their productivity and hasten development of rural communities. The economic analysis of this system showed that loan obtained for the recommended scale of operation can be amortized within 2 years of the project. It was emphasized that the operational and managerial skills of the fish farm operators account largely to the production cost and profitability of the enterprise

Investment prospects in inland capture fisheries with special reference to small reservoirs: the exclusive fishing right licence model

The paper discusses simple methods of estimating fish yield from small reservoirs and establishes 2 indices of fish yield based on: 1) the relationship between the catch per boat in artisanal commercial fish landings and the catch per unit effort in experimental gill-net survey; and also, 2) the relationship between standing crop of fish in reservoirs and catch per unit effort in experimental gill-net survey. The paper then elaborates on the methods of utilizing these simple relationships in managing small reservoirs in Nigeria based on the principle of exclusive fishing right licence with the objective of attracting investors into this viable inland fishery investment project hitherto untapped

Small-scale commercial production of tilapia fry and fingerlings in concrete raceways

This paper discusses the investment prospects in Tilapia fry and fingerling production in raceways created from the concrete drainage channel of a reservoir or pond of an existing fish farm in Nigeria. With an initial capital of 1,300 and an annual operating cost of 310 spent on procurement of fish feed and brood stock for a 10 m super(2) raceway per se, a net profit of 4,100 and 5,090 would be realized from Sarotherodon galilaeus in the first year and subsequent years of production respectively, assuming that the fingerling production rate has been maintained through the production period. It is concluded that the application of this approach of optimizing the use of available resources in the fish farm for the productive breeding of Tilapia fry and fingerlings will apart from alleviating the problem of scarcity of stocking materials in the country, increase the profit margin accruing to the fish farmer

Direct numerical simulation of hypersonic boundary layer transition over a blunt cone with a small angle of attack

The direct numerical simulation of boundary layer transition over a 5° half-cone-angle blunt cone is performed. The free-stream Mach number is 6 and the angle of attack is 1°. Random wall blow-and-suction perturbations are used to trigger the transition. Different from the authors’ previous work [Li et al., AIAA J. 46, 2899(2008)], the whole boundary layer flow over the cone is simulated (while in the author’s previous work, only two 45° regions around the leeward and the windward sections are simulated). The transition location on the cone surface is determined through the rapid increase in skin fraction coefficient (Cf). The transition line on the cone surface shows a nonmonotonic curve and the transition is delayed in the range of 0° ≤ θ ≤ 30° (θ = 0° is the leeward section). The mechanism of the delayed transition is studied by using joint frequency spectrum analysis and linear stability theory (LST). It is shown that the growth rates of unstable waves of the second mode are suppressed in the range of 20° ≤ θ ≤ 30°, which leads to the delayed transition location. Very low frequency waves VLFWs� are found in the time series recorded just before the transition location, and the periodic times of VLFWs are about one order larger than those of ordinary Mack second mode waves. Band-pass filter is used to analyze the low frequency waves, and they are deemed as the effect of large scale nonlinear perturbations triggered by LST waves when they are strong enough.The direct numerical simulation of boundary layer transition over a 5° half-cone-angle blunt cone is performed. The free-stream Mach number is 6 and the angle of attack is 1°. Random wall blow-and-suction perturbations are used to trigger the transition. Different from the authors’ previous work [ Li et al., AIAA J. 46, 2899 (2008) ], the whole boundary layer flow over the cone is simulated (while in the author’s previous work, only two 45° regions around the leeward and the windward sections are simulated). The transition location on the cone surface is determined through the rapid increase in skin fraction coefficient (Cf). The transition line on the cone surface shows a nonmonotonic curve and the transition is delayed in the range of 20° ≤ θ ≤ 30° (θ = 0° is the leeward section). The mechanism of the delayed transition is studied by using joint frequency spectrum analysis and linear stability theory (LST). It is shown that the growth rates of unstable waves of the second mode are suppressed in the range of 20° ≤ θ ≤ 30°, which leads to the delayed transition location. Very low frequency waves (VLFWs) are found in the time series recorded just before the transition location, and the periodic times of VLFWs are about one order larger than those of ordinary Mack second mode waves. Band-pass filter is used to analyze the low frequency waves, and they are deemed as the effect of large scale nonlinear perturbations triggered by LST waves when they are strong enough.

The contribution of fish intake, aquaculture, and small-scale fisheries to improving nutrition security: a literature review

Much of fish consumed by the poor are caught by household members and traded in local markets. These fish are rarely or poorly included in national statistics, and it is therefore difficult to estimate precisely the real contribution of fish to the rural poor households. This report is the first global overview of the role played by fish in improving nutrition. Fish consumption patterns of the poor, the nutritional value of fish, and small-scale fisheries and aquaculture activities are considered. It also highlights the gap in knowledge where more research is needed.

Two-Phase Flow In Anode Flow Field Of A Small Direct Methanol Fuel Cell In Different Gravities

An in-situ visualization of two-phase flow inside anode flow bed of a small liquid fed direct methanol fuel cells in normal and reduced gravity has been conducted in a drop tower. The anode flow bed consists of 11 parallel straight channels. The length, width and depth of single channel, which had rectangular cross section, are 48.0, 2.5 and 2.0 mm, respectively. The rib width was 2.0 mm. The experimental results indicated that when the fuel cell orientation is vertical, two-phase flow pattern in anode channels can evolve from bubbly flow in normal gravity into slug flow in microgravity. The size of bubbles in the reduced gravity is also bigger. In microgravity, the bubbles rising speed in vertical channels is obviously slower than that in normal gravity. When the fuel cell orientation is horizontal, the slug flow in the reduced gravity has almost the same characteristic with that in normal gravity. It implies that the effect of gravity on two-phase flow is small and the bubbles removal is governed by viscous drag. When the gas slugs or gas columns occupy channels, the performance of liquid fed direct methanol fuel cells is failing rapidly. It infers that in long-term microgravity, flow bed and operating condition should be optimized to avoid concentration polarization of fuel cells.

Strategies for meeting the fishing input requirements of small scale artisanal fisheries

An examination is made of the socio-economic factors associated with the failure of existing approaches to the fishing input requirements of small-scale fisheries in Nigeria. The fishermen and secretaries of the fishermen cooperative societies in three major settlements (Uta-Ewa, Okoroete and Iko) were selected for interviews. The survey showed that the idealogy of the fishermen of the role of cooperative society is wrong and specific programmes need to be directed towards correcting this perception. Thus, for any meaningful support programme for the artisanal small-scale fishermen, the perception of the fishermen about the cooperative organization must first be aligned rightly. It is suggested that the fishing input be determined by type and specification as a preliminary step in the delivery of inputs to the fishermen. Social, economic and cultural variabilities should be related to the requirement by the fishermen. The price level of fishermen will determine the direction and level of government support required

Small angle X-ray scattering of the colloidal crystal

The monodisperse polystyrene spheres are assembled into the colloidal crystal on the glass substrate by vertical deposition method, which is aimed at the so-called photonic crystal applications. The structural information of the bulk colloidal crystal is crucial for understanding the crystal growth mechanism and developing the various applications of colloidal crystal. Small-angle X-ray scattering (SAXS) technique was used to obtain the bulk structure of the colloidal crystal at Beamline 1W2A of BSRF. It is found that the SAXS pattern is sensitive to the relative orientation between the colloidal sample and the incident X-ray direction. The crystal lattice was well distinguished and determined by the SAXS data.

Design and construction of portable surface aeration pump for tanks and small ponds

The maintenance of adequate dissolved oxygen level is very important in the economy of any aquaculture system. An easy to construct aerating device was created using 0.5 hp water-pump, shower rose, Styrofoam, and rubber hose. The aerator works by drawing water from below and discharging it into the atmosphere as a spray. The spray is aerated as it splashes into the water surface. The aerating device has an average spray of 1.2 unit and doubles the dissolved oxygen content of 37.8 m super(3) tank in one hour