A structural basis for the selection of dominant alpha beta T cell receptors in antiviral immunity

We have examined the basis for immunodominant or public TCR usage in an antiviral CTL response. Residues encoded by each of the highly selected genetic elements of an immunodominant clonotype recognizing Epstein-Barr virus were critical to the antigen specificity of the receptor. Upon recognizing antigen the immunodominant TCR undergoes extensive conformational changes in the complementarity determining regions (CDRs), including the disruption of the canonical structures of the germline-encoded CDR1alpha and CDR2alpha loops to produce an enhanced fit with the HLA-peptide complex. TCR ligation induces conformational changes in the TCRalpha constant domain thought to form part of the docking site for CD3epsilon. These findings indicate that TCR immunodominance is associated with structural properties conferring receptor specificity and suggest a novel structural link between TCR ligation and intracellular signaling.

The tree cut and merge algorithm for estimation of network reliability

This article presents Monte Carlo techniques for estimating network reliability. For highly reliable networks, techniques based on graph evolution models provide very good performance. However, they are known to have significant simulation cost. An existing hybrid scheme (based on partitioning the time space) is available to speed up the simulations; however, there are difficulties with optimizing the important parameter associated with this scheme. To overcome these difficulties, a new hybrid scheme (based on partitioning the edge set) is proposed in this article. The proposed scheme shows orders of magnitude improvement of performance over the existing techniques in certain classes of network. It also provides reliability bounds with little overhead.

Serum inhibin A and B concentrations during the menstrual cycle in mothers of spontaneous dizygotic twins

Dizygotic twinning in humans is influenced by genetic factors suggesting inherited variation affects follicle development and predisposes to double ovulations. In a previous study, we conducted a detailed examination of follicle development and variation in hormone concentrations during the menstrual cycle in mothers of DZ twins (MODZT) compared with an age-matched control group of mothers of singletons. We did not detect differences in FSH concentrations between mothers of twins and mothers of singletons. Serum inhibin concentrations were measured by a radioimmunoassay that did not distinguish between dimeric inhibin A and B forms and free inhibin alpha subunit. We therefore analyzed the samples from this study with specific assays to determine whether concentrations of inhibin A and B were different between MODZT and controls and therefore contribute to the twinning phenotype. There were no significant differences between MONT with single ovulations and control women in inhibin A and B concentrations during the cycle, including the critical period for the selection of the dominant follicle. These data suggest that the genetic cause of twinning is not associated with changes in FSH concentrations or recognised feedback mechanisms regulating FSH release.

Full-scale demonstration of biological nutrient removal in a single tank SBR process

Complete biological nutrient removal (BNR) in a single tank, sequencing batch reactor (SBR) process, is demonstrated here at full-scale on a typical domestic wastewater. The unique feature of the UniFed process is the introduction of the influent into the settled sludge blanket during the settling and decant periods of the SBR operation. This achieves suitable conditions for denitrification and anaerobic phosphate release which is critical to successful biological phosphorus removal, It also achieves a selector effect, which helps in generating a compact, well settling biomass in the reactor. The results of this demonstration show that it is possible to achieve well over 90% removal of GOD, nitrogen and phosphorus in such a process. Effluent quality achieved over a six-month operating period directly after commissioning was: 29 mg/l GOD, 0.5 mg/l NH4-N, 1.5 mg/l NOx-N and 1.5 mg/l PO4-P (50%-iles of daily samples). During an 8-day, intensive sampling period, the effluent BOD5 was

Signal trait sexual dimorphism and mutual sexual selection in Drosophila serrata

The evolution of sexual dimorphism may occur when natural and sexual selection result in different optimum trait values for males and females. Perhaps the most prominent examples of sexual dimorphism occur in sexually selected traits, for which males usually display exaggerated trait levels, while females may show reduced expression of the trait. In some species, females also exhibit secondary sexual traits that may either be a consequence of a correlated response to sexual selection on males or direct sexual selection for female secondary sexual traits. In this experiment, we simultaneously measure the intersex genetic correlations and the relative strength of sexual selection on males and females for a set of cuticular hydrocarbons in Drosophila serrata. There was significant directional sexual selection on both male and female cuticular hydrocarbons: the strength of sexual selection did not differ among the sexes but males and females preferred different cuticular hydrocarbons. In contrast with many previous studies of sexual dimorphism, intersex genetic correlations were low. The evolution of sexual dimorphism in D. serrata appears to have been achieved by sex-limited expression of traits controlled by genes on the X chromosome and is likely to be in its final stages.

Nitrification of high strength ammonia wastewtaer treatment - process selection is the major factor.

Biological nitrogen removal via the nitrite pathway in wastewater treatment is very important in Saving the cost of aeration and as an electron donor for denitrification. Wastewater nitrification and nitrite accumulation were carried out in a biofilm airlift reactor with autotrophic nitrifying biofilm. The biofilm reactor showed almost complete nitrification and most of the oxidized ammonium was present as nitrite at the ammonium load of 1.5 to 3.5 kg N/m3.d. Nitrite accumulation was stably achieved by the selective inhibition of nitrite oxidizers with free ammonia and dissolved oxygen limitation. Stable 100% conversion to nitrite could also be achieved even under the absence of free ammonia inhibition on nitrite oxidizers. Batch ammonium oxidation and nitrite oxidation with nitrite accumulating nitrifying biofilm showed that nitrite Oxidation was completely inhibited when free ammonia is higher than 0.2 mg N/L. However, nitrite oxidation activity was recovered as soon as the free ammonia concentration was below the threshold level when dissolved oxygen concentration was not the limiting factor. Fluorescence in situ hybridization analysis of cryosectioned nitrite accumulating nitrifying biofilm showed that the β-subclass of Proteobacteria, where ammonia oxidizers belong, was distributed outside the biofilm whereas the α-subclass of Proteobacteria, where nitrite oxidizers belong, was found mainly in the inner part of the biofilm. It is likely that dissolved oxygen deficiency or limitation in the inner part of the nitrifying biofilm, where nitrite oxidizers exist, is responsible for the complete shut down of the nitrite oxidizers activity under the absence of free ammonia inhibition.

'Suitable mothers': lesbian and single women and the 'unborn' in Australian parliamentary discourse

Throughout the latter months of 2000 and early 2001, the Australian public, media and parliament were engaged in a long and emotive debate about motherhood. This debate constructed the two main protagonists, the unborn 'child' and the potential mother, with a variety of different and often oppositional identities. The article looks at the way that these subject identities interacted during the debate, starting from the premise that policy making has unintended and unacknowledged material outcomes, and using governmentality as a tool through which to analyse and understand processes of identity manipulation and resistance within policy making. The recent debate concerning the right of lesbian and single women to access new reproductive technologies in Australia is used as a case study. Nominally the debate was about access to IVF technology; in reality, however, the debate was about the governing of women and, in particular, the governing of motherhood identities. The article focuses on the parliamentary debate over the drafting of legislation designed to stop lesbian and single women from accessing these technologies, particularly the utilization of the 'unborn' subject within these debates as a device to discipline the identity of 'mother'.

Low-temperature single-crystal Raman and neutron-diffraction study of the hydrogenous ammonium copper(II) tutton salt and the deuterated analogue in the metastable state

Low-temperature (15 K) single-crystal neutron-diffraction structures and Raman spectra of the salts (NX4)(2)[CU(OX2)(6)](SO4)(2), where X = H or D, are reported. This study is concerned with the origin of the structural phase change that is known to occur upon deuteration. Data for the deuterated salt were measured in the metastable state, achieved by application of 500 bar of hydrostatic pressure at similar to303 K followed by cooling to 281 K and the subsequent release of pressure. This allows for the direct comparison between the hydrogenous and deuterated salts, in the same modification, at ambient pressure and low temperature. The Raman spectra provide no intimation of any significant change in the intermolecular bonding. Furthermore, structural differences are few, the largest being for the long Cu-O bond, which is 2.2834(5) and 2.2802(4) Angstrom for the hydrogenous and the deuterated salts, respectively. Calorimetric data for the deuterated salt are also presented, providing an estimate of 0.17(2) kJ/mol for the enthalpy difference between the two structural forms at 295.8(5) K. The structural data suggest that substitution of hydrogen for deuterium gives rise to changes in the hydrogen-bonding interactions that result in a slightly reduced force field about the copper(II) center. The small structural differences suggest different relative stabilities for the hydrogenous and deuterated salts, which may be sufficient to stabilize the hydrogenous salt in the anomalous structural form.

Effect of time of harvest of budded virus on the selection of baculovirus FP mutants in cell culture

Rapid formation and selection of FP (few polyhedra) mutants occurs during serial passaging of Helicoverpa armigera nucleopolyhedrovirus (HaSNPV) in insect cell culture. The production of HaSNPV for use as biopesticides requires the passaging of the virus over a number of passages to produce enough virus inoculum for large-scale fermentation. During serial passaging in cell culture, FP mutants were rapidly selected, resulting in declined productivity and reduced potency of virus. Budded virus (BV) is usually harvested between 72 and 96 h postinfection (hpi) in order to obtain a high titer virus stock. In this study, the effect of tine of harvest (TOH) for BV on the selection rate of HaSNPV FP mutants during serial passaging was investigated. BV were harvested at different times postinfection, and each series was serially passaged for six passages. The productivity and percentage of FP mutants at each passage were determined. It was found that the selection of FP mutants can he reduced by employing an earlier TOH for BV. Serial passaging with BV harvested at 48 hpi showed a slower accumulation of FP mutants compared to that of BV harvested after 48 hpi. Higher cell specific yields were also maintained when BV were harvested at 48 hpi. When BV that were formed between 48 and 96 hpi were harvested and serially passaged, FP mutants quickly dominated the virus population. This suggests that the V formed and released between 48 and 96 hpi are most likely from FP mutant infected cells.

Cartografando movimentos curriculares produzidos nas redes de conversações nos encontrosformações do PROEJA/IFES/ES

Problematiza a constituição do currículo (e da “formação docente” no campo curricular), no cotidiano escolar, na dimensão das conversações. Objetiva acompanhar os movimentos curriculares concernentes ao Proeja entre formas e forças complexas no cotidiano do Ifes – campus Venda Nova do Imigrante (VNI). Compõe com as linhas de pensamentos principalmente de Alves (2008, 2010, 2012); Carvalho (2004, 2008a, 2008b, 2009, 2012); Deleuze (1988, 2002, 2010); Deleuze e Guattari (1995); Ferraço (2007, 2008a, 2008b); Garcia (2011); Guattari (1987, 2004, 2012); Kastrup (2009, 2013); Lopes e Macedo (2011); Lopes (2010, 2011); Oliveira (2005, 2009, 2012); Paiva (2004, 2009); Rolnik (1989); e Spinoza (2013), entremeando os conceitos de movimentos e afetos no campo do currículo em redes na relação híbrida com os encontros-formações docente do/no Proeja. Adota a (não) metodologia cartográfica ao acompanhar movimentos curriculares (des)(re)territorializantes nas redes de conversações, especialmente nos encontrosformações: “Rodas de conversas com professores e demais servidores do Proeja”. Utiliza como principais instrumentos metodológicos a observação participante, a gravação das vozes e o registro em diário de campo. Contribui para outros movimentos de pesquisa ao capturar produzir e analisar dados em que se percebe que: ainda que tenha ocorrido um planejamento coletivo, outras temáticas surgiram nos encontros formações (que não se pretendiam engessados e não objetivavam a paralisação dos fluxos que pedem passagem), e tais assuntos puderam ser usados como disparadores para criação de outros movimentos curriculares; as concepções dos professores sobre a “dificuldade/facilidade” em ministrar aulas para o Proeja e os lugares estabelecidos entre estudantes e docentes no processo ensino-aprendizagem não estão relacionados diretamente, em relação de causa e efeito, à disciplina/área de conhecimento específica que ministram, mas aos agenciamentos, aos ligamentos e às rupturas produzidas nas relações com essas redes de saberes fazeres poderes que envolvem múltiplos agentes: docentes, outros servidores, alunos, experiências e encontros múltiplos dentro fora no espaço tempo do Ifes; uma tríade-refrão coopera para a criação de uma fôrma triangular que enfatiza a noção de um padrão em um processo molar enraizado nas árvores do conhecimento: perfil, seleção e nivelamento, contudo, algumas linhas de fuga dissonantes são criadas por entre as fissuras dos pretensos tons harmônicos; as frases “os professores do IF não estão preparados para ministrar aulas para o Proeja” ou “não há formação/qualificação para os docentes se relacionarem com o Proeja” são utilizadas, em alguns discursos, como escudos-argumentos para a opção-política de não oferta de vagas para a modalidade EJA em composição com fios que afirmam tal especificidade da educação básica, dentro da rede federal, como um “favor social”; processos que envolvem a (des)organização da matriz curricular são considerados por alguns participantes como início, “produto” e objetivo das conversas curriculares e provocam tensões que (i)mobilizam, (não) movimentam entre os afetos dos corpos, podendo levar à (não) ação coletiva; a noção de “mercado de trabalho” ainda impera nos discursos, ciclicamente, enquanto início fim das problematizações do currículo do Ensino Médio e da EJA; a expressão “integração curricular” é constantemente usada nos discursos que circulam o campus, no entanto, os sentidos produzidos, as concepções e as teorias curriculares que embasam a noção de “integração” no currículo são bem diversos; não há totalidades nos discursos, não há homogeneização, não foi efetivada nenhuma coesão/única voz representante (e esse também não era o objetivo desta pesquisa); ainda que o tema da roda se propusesse às conversas curriculares do/no Proeja, nesses encontros, os participantes manifestaram a necessidade de intensificar os movimentos produzidos nas rodas visando à discussão dos currículos textos de todos os cursos e modalidades ofertados pelos campus VNI e na intensificação de espaços para trocas de experiências curriculares cotidianas; na potencialização das diferenças como possibilidades de inventividade nos encontros-formações docente e nas danças curriculares que envolvem diversas relações de aprendizagem no Ifes, algumas experimentações foram produzidas, entre afetos, criando composições(des)(re)territorializantes e ressonando com movimentos que não se restringiram às rodas de conversas, contudo, enredaram-se em fios de outros espaços tempos do campus em tentativas de propagações de currículos multidão.

Propostas de utilização de sequências didáticas investigativas para o estudo do conceito de velocidade no ensino médio

A evolução das concepções alternativas em direção ao conhecimento científico é um processo longo. Isso porque essas ideias são coerentes, universais, persistentes e consistentes (PINTÓ, et al., 1996). Vários autores têm destacado as contribuições da utilização de atividades investigativas para a evolução conceitual (AZEVEDO, 2006; CARVALHO, 2013; BORGES, 2002). Neste trabalho foi realizado um estudo sobre as contribuições dessas atividades para a evolução do conceito de velocidade. O estudo foi realizado em novembro de 2013 com alunos do primeiro ano do ensino médio que já haviam estudado o conteúdo de cinemática. A maioria deles demonstrou concepção alternativa, o que mostra que essa forma de conhecimento pode existir mesmo após a instrução formal. Foram realizadas três atividades que colocaram os alunos diante de diferentes situações com o objetivo de promover conflito cognitivo (CARVALHO, 1992). A produção escrita dos alunos foi recolhida e analisada utilizando-se como referencial a análise de conteúdo (BARDIN, 1977). As atividades investigativas realizadas mostraram ser uma boa alternativa às aulas tradicionais de laboratório e demonstraram potencial em promover evolução das concepções alternativas.

Relationship between fruit traits of custard apple trees (Annona squamosa L.)

The objective of this study was to estimate simple and partial coefficients of correlation, as well as to divide their effects into direct and indirect using path analysis for custard apple tree traits. Twenty half-sibling progenies were evaluated in a randomized block design with five replicates, and plots consisting of four plants. Six traits were evaluated in the first cropping season (mean number of seeds per fruit and mean weight of the pericarp, pulp, pedicel, seeds per fruit, and the whole fruit), while five traits were evaluated in the first three cropping seasons (mean fruit length and width, total number of fruits ha-1, mean fruit weight (in both types of analyses), and fruit yield in kg ha-1). The results of this work led to the conclusion that doing selection based on simple correlation estimates may not be convenient, since not always a cause and effect relationship can be verified between two traits. Positive correlations were obtained between number of seeds and seed weight, and between number of fruits and yield. The greatest direct effects were those obtained for pulp weight on fruit weight and for mean number and weight of fruits on fruit yield. The most important indirect effects were obtained for number of seeds and pericarp weight, obtained via pulp weight, on fruit weight, and for fruit length and width, obtained via mean fruit weight, on fruit yield.

Local piezoelectric response of single poly(vinylidene fluoride) electrospun fibers

It is shown that electrospun poly(vynilidene fluoride) nanofibers are fully poled right after preparation and show b-phase contents of 70%, therefore being able to be implemented into electroactive devices without further processing steps. Further,the local piezoelectric properties of individual electrospun fibers have been studied by piezoresponse force microscopy. Piezoelectric response, polarization switching, and nanoscale patterning of the fibers have been demonstrated.

Integrating environmental and economic life cycle analysis in product development: a material selection case study

Purpose Achieving sustainability by rethinking products, services and strategies is an enormous challenge currently laid upon the economic sector, in which materials selection plays a critical role. In this context, the present work describes an environmental and economic life cycle analysis of a structural product, comparing two possible material alternatives. The product chosen is a storage tank, presently manufactured in stainless steel (SST) or in a glass fibre reinforced polymer composite (CST). The overall goal of the study is to identify environmental and economic strong and weak points related to the life cycle of the two material alternatives. The consequential win-win or trade-off situations will be identified via a Life Cycle Assessment/Life Cycle Costing (LCA/LCC) integrated model. Methods The LCA/LCC integrated model used consists in applying the LCA methodology to the product system, incorporating, in parallel, its results into the LCC study, namely those of the Life Cycle Inventory (LCI) and the Life Cycle Impact Assessment (LCIA). Results In both the SST and CST systems the most significant life cycle phase is the raw materials production, in which the most significant environmental burdens correspond to the Fossil fuels and Respiratory inorganics categories. The LCA/LCC integrated analysis shows that the CST has globally a preferable environmental and economic profile, as its impacts are lower than those of the SST in all life cycle stages. Both the internal and external costs are lower, the former resulting mainly from the composite material being significantly less expensive than stainless steel. This therefore represents a full win-win situation. As a consequence, the study clearly indicates that using a thermoset composite material to manufacture storage tanks is environmentally and economically desirable. However, it was also evident that the environmental performance of the CST could be improved by altering its End-of-Life stage. Conclusions The results of the present work provide enlightening insights into the synergies between the environmental and the economic performance of a structural product made with alternative materials. Further, they provide conclusive evidence to support the integration of environmental and economic life cycle analysis in the product development processes of a manufacturing company, or in some cases even in its procurement practices.