926 resultados para reti ibride,Router Cisco,Switch HP,Raspberry Pi,interfacciamento,routing,switching,protocollo OSPF


Relevância:

20.00% 20.00%

Publicador:

Resumo:

In cases of decorative and functional applications, chromium results in protection against wear and corrosion combined with chemical resistance and good lubricity. However, pressure to identify alternatives or to improve conventional chromium electroplating mechanical characteristics has increased in recent years, related to the reduction in the fatigue strength of the base material and to environmental requirements. The high efficiency and fluoride-free hard chromium electroplating is an improvement to the conventional process, considering chemical and physical final properties. One of the most interesting, environmentally safer and cleaner alternatives for the replacement of hard chrome plating is tungsten carbide thermal spray coating, applied by the high velocity oxy-fuel (HVOF) process. The aim of this study was to analyse the effects of the tungsten carbide thermal spray coating applied by the HP/HVOF process and of the high efficiency and fluoride-free hard chromium electroplating (in the present paper called 'accelerated'), in comparison to the conventional hard chromium electroplating on the AISI 4340 high strength steel behaviour in fatigue, corrosion, and abrasive wear tests. The results showed that the coatings were damaging to the AISI 4340 steel behaviour when submitted to fatigue testing, with the tungsten carbide thermal spray coatings showing the better performance. Experimental data from abrasive wear tests were conclusive, indicating better results from the WC coating. Regarding corrosion by salt spray test, both coatings were completely corroded after 72 h exposure. Scanning electron microscopy technique (SEM) and optical microscopy were used to observe crack origin sites, thickness and adhesion in all the coatings and microcrack density in hard chromium electroplatings, to aid in the results analysis. © 2001 Elsevier Science B.V. All rights reserved.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In this paper we use the Hermite-Biehler theorem to establish results for the design of proportional plus integral (PI) controllers for a class of time delay systems. We extend results of the polynomial case to quasipolynomials using the property of interlacing in high frequencies of the class of time delay systems considered. A signature for the quasipolynomials in this class is derived and used in the proposed approach which yields the complete set of the stabilizing PI controllers.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Incluye Bibliografía

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The phase stability of a commercial purity (Ti-CP), high purity (Ti-HP) and Ti-6Al-4V alloy were investigated in a diamond anvil cell up to 32 GPa and 298 K using a polychromatic X-ray beam. The Ti-CP and Ti-HP shown the same HCP (c/a∼0.632) to Hexagonal (c/a∼1.63) non reversible martensitic transition at about 9 GPa. The as received Ti-6Al-4V shows a very low relative volume fraction β-Ti / α-Ti. No phase changes were observed in the Ti-6Al-4V alloy in the pressure range of this study. The α phase of the Ti-6Al-4V shows monotonic volume cell pressure dependence. This volume change is reversible and non-hysteretic. The cell of the a phase recovered its original volume when the pressure was released. © 2010 IOP Publishing Ltd.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work proposes a methodology for optimized allocation of switches for automatic load transfer in distribution systems in order to improve the reliability indexes by restoring such systems which present voltage classes of 23 to 35 kV and radial topology. The automatic switches must be allocated on the system in order to transfer load remotely among the sources at the substations. The problem of switch allocation is formulated as nonlinear constrained mixed integer programming model subject to a set of economical and physical constraints. A dedicated Tabu Search (TS) algorithm is proposed to solve this model. The proposed methodology is tested for a large real-life distribution system. © 2011 IEEE.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

We present a metaheuristic approach which combines constructive heuristics and local searches based on sampling with path relinking. Its effectiveness is demonstrated by an application to the problem of allocating switches in electrical distribution networks to improve their reliability. Our approach also treats the service restoration problem, which has to be solved as a subproblem, to evaluate the reliability benefit of a given switch allocation proposal. Comparisons with other metaheuristics and with a branch-and-bound procedure evaluate its performance. © 2012 Published by Elsevier Ltd.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Soil degradation can be defined as a process that reduces the ability of soil to produce property or services. Thus, the objective was to study the influence of topography and erodibility in the distribution of the chemical attributes of an Alfissol in degraded areas of Gilbués in the State of Piaui, Brazil. In the chosen area a sampling grid of 1 ha was demarcated, with points spaced at 10 x 10 m, and 121 samples were collected at intersections, in 0-0.20 m depth. Each point was georeferenced as a way to demarcate the area and prepare a topography map. For all samples pH, organic matter, phosphorus, potassium, calcium, magnesium, hydrogen and aluminum were determined. The estimate of erodibility was calculated from the equation proposed by Denardin. Based on the experiment and the results obtained it is concluded that the number of samples used was sufficient to determine the variability of soil in degraded areas of the Gilbués municipality. The discontinuity in the topography of the landscape and erodibility cause a moderate degree of heterogeneity in most chemical properties of the studied soil, establishing specific management zones.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The aim of this work was to determine crop coefficients (Kc) of drip irrigated watermelon in the climatic and growing conditions of the Gurgueia Vale, State of Piaui, Brazil, located at 8 ° 26' S, 43 ° 47' W and altitude of 251 m. The reference evapotranspiration (ET0) was determined by the sum of hourly values of ET0 obtained by the Penman-Monteith method parameterized by FAO with climatic data obtained from an automatic weather station. The daily crop evapotranspiration (ETc) was measured by three weighing lysimeters of load cells. Aiming high fruit yield in this region, we recommend that the following local values of Kc and Kcb be used for planning and management of irrigation, respectively: initial stage (crop establishment) - 0.34 and 0.24; intermediate stage (growth and fruit maturation) - 1.16 and 1.10; end stage (harvest) - 0.93 and 0.86. These Kc values of initial and intermediate phases are statistically higher than the values of Kc and Kcb already adjusted according to the methodology presented in the FAO Irrigation and Drainage Paper 56. The values of Kc and Kcb at the end phase are not statistically different from the FAO values.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Física - IFT

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Geografia - IGCE

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Geografia - IGCE

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Geografia - IGCE