Geochemistry and risk assessment of street dust in Luanda, Angola, a tropical urban environment

A total of 92 samples of street dust were collected in Luanda, Angola, were sieved below 100 μm, and analysed by ICP-MS for 35 elements after an aqua-regia digestion. The concentration and spatial heterogeneity of trace elements in the street dust of Luanda are generally lower than in most industrialized cities in the Northern hemisphere. These observations reveal a predominantly “natural” origin for the street dust in Luanda, which is also manifested in that some geochemical processes that occur in natural soils are preserved in street dust: the separation of uranium from thorium, and the retention of the former by carbonate materials, or the high correlation between arsenic and vanadium due to their common mode of adsorption on solid particles in the form of oxyanions. The only distinct anthropogenic fingerprint in the composition of Luanda's street dust is the association Pb–Cd–Sb–Cu (and to a lesser extent, Ba–Cr–Zn). The use of risk assessment strategies has proved helpful in identifying the routes of exposure to street dust and the trace elements therein of most concern in terms of potential adverse health effects. In Luanda the highest levels of risk seem to be associated (a) with the presence of As and Pb in the street dust and (b) with the route of ingestion of dust particles, for all the elements included in the study except Hg, for which inhalation of vapours presents a slightly higher risk than ingestion. However, given the large uncertainties associated with the estimates of toxicity values and exposure factors, and the absence of site-specific biometric factors, these results should be regarded as preliminary and further research should be undertaken before any definite conclusions regarding potential health effects are drawn.

Plasma–wall interaction in laser inertial fusion reactors: novel proposals for radiation tests of first wall materials

Dry-wall laser inertial fusion (LIF) chambers will have to withstand strong bursts of fast charged particles which will deposit tens of kJ m−2 and implant more than 1018 particles m−2 in a few microseconds at a repetition rate of some Hz. Large chamber dimensions and resistant plasma-facing materials must be combined to guarantee the chamber performance as long as possible under the expected threats: heating, fatigue, cracking, formation of defects, retention of light species, swelling and erosion. Current and novel radiation resistant materials for the first wall need to be validated under realistic conditions. However, at present there is a lack of facilities which can reproduce such ion environments. This contribution proposes the use of ultra-intense lasers and high-intense pulsed ion beams (HIPIB) to recreate the plasma conditions in LIF reactors. By target normal sheath acceleration, ultra-intense lasers can generate very short and energetic ion pulses with a spectral distribution similar to that of the inertial fusion ion bursts, suitable to validate fusion materials and to investigate the barely known propagation of those bursts through background plasmas/gases present in the reactor chamber. HIPIB technologies, initially developed for inertial fusion driver systems, provide huge intensity pulses which meet the irradiation conditions expected in the first wall of LIF chambers and thus can be used for the validation of materials too.

A constitutive model for the in-plane mechanical behavior of nonwoven fabrics

A constitutive model is presented for the in-plane mechanical behavior of nonwoven fabrics. The model is developed within the context of the finite element method and provides the constitutive response for a mesodomain of the fabric corresponding to the area associated to a finite element. The model is built upon the ensemble of three blocks, namely fabric, fibers and damage. The continuum tensorial formulation of the fabric response rigorously takes into account the effect of fiber rotation for large strains and includes the nonlinear fiber behavior. In addition, the various damage mechanisms experimentally observed (bond and fiber fracture, interfiber friction and fiber pull-out) are included in a phenomenological way and the random nature of these materials is also taken into account by means of a Monte Carlo lottery to determine the damage thresholds. The model results are validated with recent experimental results on the tensile response of smooth and notched specimens of a polypropylene nonwoven fabric.

Damage localization and failure locus under biaxial loading in glass-fiber nonwoven felts

The pattern of damage localization and fracture under uniaxial and biaxial tension was studied in glass–fiber nonwoven felts. The analyses were carried out within the framework of the finite-element simulation of plain and notched specimens in which the microstructure of the felt, made up of fiber bundles connected at the cross point through an organic binder, was explicitly represented. Following previous experimental observations, fracture by interbundle decohesion and energy dissipation by frictional sliding between the bundles were included in the model. It was found that the failure path in these materials was controlled by the maximum applied normal stress, regardless of the loading path, and that the failure locus under biaxial tension was well represented by the von Mises failure criteria. The notch sensitivity of the nonwoven felts was limited and the presence of a notch did not modify the failure path.

Effect of adhesive thickness and concrete strength on FRP-Concrete Bonds

The use of fiber-reinforced polymer (FRP) composites for strengthening, repairing, or rehabilitating concrete structures has become more and more popular in the last 10 years. Irrespective of the type of strengthening used, design is conditioned, among others, by concrete-composite bond failure, normally attributed to stress at the interface between these two materials. Single shear, double shear, and notched beam tests are the bond tests most commonly used by the scientific community to estimate bond strength, effective length, and the bond stress-slip relationship. The present paper discusses the effect of concrete strength and adhesive thickness on the results of beam tests, which reproduce debonding conditions around bending cracks much more accurately. The bond stress-slip relationship was analyzed in a cross section near the inner edge, where stress was observed to concentrate. The ultimate load and the bond stress-slip relationship were visibly affected by concrete strength. Adhesive thickness, in turn, was found to have no significant impact on low-strength concrete but a somewhat greater effect on higher strength materials.

Plasma–wall interaction in laser inertial fusion reactors: novel proposals for radiation tests of first wall materials

Dry-wall laser inertial fusion (LIF) chambers will have to withstand strong bursts of fast charged particles which will deposit tens of kJ m−2 and implant more than 1018 particles m−2 in a few microseconds at a repetition rate of some Hz. Large chamber dimensions and resistant plasma-facing materials must be combined to guarantee the chamber performance as long as possible under the expected threats: heating, fatigue, cracking, formation of defects, retention of light species, swelling and erosion. Current and novel radiation resistant materials for the first wall need to be validated under realistic conditions. However, at present there is a lack of facilities which can reproduce such ion environments. This contribution proposes the use of ultra-intense lasers and high-intense pulsed ion beams (HIPIB) to recreate the plasma conditions in LIF reactors. By target normal sheath acceleration, ultra-intense lasers can generate very short and energetic ion pulses with a spectral distribution similar to that of the inertial fusion ion bursts, suitable to validate fusion materials and to investigate the barely known propagation of those bursts through background plasmas/gases present in the reactor chamber. HIPIB technologies, initially developed for inertial fusion driver systems, provide huge intensity pulses which meet the irradiation conditions expected in the first wall of LIF chambers and thus can be used for the validation of materials too.

Effect of type of dietary carbohydrates on digestion, intestinal barrier and growth performance in 25-d weaned rabbits

Los objetivos globales de esta tesis han sido estudiar el efecto que los carbohidratos de la dieta ejercen sobre los rendimientos productivos, la barrera intestinal, y la digestión de animales destetados a 25 días de edad. Además se ha estudiado cuál es el mejor periodo para determinar la digestibilidad fecal tras el destete a esta edad. En el primer experimento se estudió el efecto de la fibra neutro detergente soluble (FNDS) sobre la barrera intestinal, digestión, microbiota intestinal y rendimientos productivos de gazapos en gazapos en la fase post-destete. Se diseñaron tres piensos isonutritivos en los que la única fuente de variación fueron los niveles de fibra soluble. A partir de una dieta control (AH) con 103 g/kg de materia seca de FNDS y alfalfa como fuente principal de fibra, se sustituyó la mitad de esta alfalfa por una mezcla de pulpa de remolacha y pulpa de manzana (75:25) en el pienso B-AP y por una mezcla de cascarilla y concentrado de proteína de soja (88:12) en el pienso OH, obteniéndose 131 y 79 g/kg de FNDS sobre materia seca, respectivamente. Los conejos se destetaron a 25 días y fueron alimentados con los piensos experimentales hasta los 35 días de edad, momento en el que se sacrificaron para la determinación de la digestibilidad ileal aparente (DIA) de la materia seca (MS), proteína bruta (PB) y almidón, la morfología de la mucosa, y actividad enzimática en el yeyuno, el tejido linfoide asociado a la mucosa, así como la microbiota intestinal. Para la determinación de la morfología de la mucosa se utilizaron adicionalmente 19 animales lactantes de 35 días de edad. Para el estudio de la tasa de mortalidad, se utilizaron 118 animales más por tratamiento que recibieron los piensos experimentales durante las dos semanas post-destete y posteriormente un pienso comercial hasta los 60 días de edad. Los animales recibieron durante todo el experimento medicación en el agua de bebida (100 ppm de apramicina sulfato y 120 ppm de tilosina tartrato). El nivel de fibra soluble mejoró los parámetros que se utilizaron para la caracterización del estado de la barrera intestinal. Los conejos alimentados con el mayor nivel de FNDS en el pienso presentaron una mayor longitud de los villi (P=0.001), un mayor ratio longitud villi/profundidad de las criptas (8.14; P=0.001), una mayor actividad disacaridásica (8671 μmol de glucosa/g de proteína; P=0.019), así como una mayor digestibilidad ileal (96.8%; P=0.002), observándose una reducción en el flujo ileal de almidón a medida que se incrementó el nivel de fibra soluble en el pienso (1,2 vs 0,5 g/d; P=0.001). Los animales lactantes a 35 días de edad presentaron un ratio longitud de villi/profundidad de las criptas menor que el observado en aquéllos alimentados con el pienso B-AP (6.70), pero superior al de los piensos AH y OH. Niveles inferiores de NDFS tendieron (P=0.074) a incrementar la respuesta inmune de tipo celular (linfocitos CD8+). El pienso también afectó a la producción de IL2 (CD25+; P=0.029; CD5+CD25+; P=0.057), pero sin llegar a establecerse una clara relación con el nivel de fibra soluble. La diversidad de la microbiota intestinal no se vio afectada por el pienso (P ≥ 0.38). Los animales alimentados con las piensos B-AP y AH presentaron una reducción en la frecuencia de detección de Clostridium perfringens tanto en íleon (P=0.062) como en ciego (4.3 vs. 17.6%, P =0.047), comparado con el pienso OH. Además la tasa de mortalidad (118 gazapos/pienso) disminuyó de 14.4% en el pienso OH a 5.1% en el pienso B-AP. Entre los 32 y los 35 días de edad se determinó la digestibilidad fecal aparente (14/pienso) de la materia seca (MS), energía bruta (EB), proteína bruta (PB), fibra neutro detergente (FND), fibra ácido detergente (FAD) y almidón. Este grupo, junto con otros nueve animales por tratamiento se utilizaron para determinar el peso del estómago y el ciego, la concentración cecal de ácidos grasos volátiles (AGV) y amoniaco (NH3), así como las tasas de similitud de la microbiota intestinal. Además se estudiaron los rendimientos productivos (35 animales/tratamiento) de los gazapos durante todo el período de cebo, consumiendo los piensos experimentales desde el destete hasta los 35 días y posteriormente un pienso comercial hasta los 60 días de edad. Niveles crecientes de FNDS mejoraron la digestibilidad fecal de la materia seca (MS) y energía (P<0.001). La inclusión FNDS aumentó de manera lineal el peso del contenido cecal (P=0.001) y el peso del aparato digestivo completo (P=0.008), y en los días previos al sacrificio disminuyó de manera lineal el consumo medio diario (P=0.040). Se observó además, una disminución lineal (P≤0.041) del pH del estómago. No se encontró relación entre el pH, la concentración y proporciones molares de AGV y el nivel de FNDS. El pienso pareció tener un efecto, incluso superior al de la madre, sobre la tasa de similitud de la microbiota, y los efectos fueron mayores a nivel cecal que ileal. La eficacia alimenticia aumentó de manera lineal en un 12% entre piensos extremos tras el destete (25- 39d) y en un 3% en el período global de cebo con niveles mayores de NDFS. El consumo medio diario durante la fase post-destete y durante todo el período de cebo, tendió a aumen tar (P≤0.079) con niveles mayores de FNDS, sin embargo no se apreció efecto sobre la ganancia media diaria (P≥0.15). En conclusión, el incremento del nivel de fibra soluble en el pienso parece resultar beneficioso para la salud del animal ya que mejora la integridad de la mucosa, y reduce la frecuencia de detección de potenciales patógenos como C. perfringens y Campylobacter spp. Conforme a estos resultados, debería tenerse en cuenta el contenido en fibra soluble en la formulación de piensos de conejos en la fase post-destete. El objetivo del segundo experimento fue determinar el efecto de la fuente de almidón sobre la digestión, la microbiota intestinal y los rendimientos productivos en conejos destetados con 25 días de edad. Se formularon tres piensos isonutritivos en los que se modificaron las principales fuentes de almidón: trigo crudo, trigo cocido y una combinación de trigo y arroz cocido. Dos grupos de 99 y 193 animales se destetaron con 25 días de edad. El primero de ellos se utilizó para la determinación de los parámetros productivos conforme al mismo protocolo seguido en el experimento anterior. El segundo de los grupos se utilizó para la determinación de la digestibilidad fecal de 32 a 35 d, la digestibilidad ileal aparente (DIA) a 35 d, la morfología de la mucosa intestinal, los parámetros de fermentación cecal; así como, la caracterización de la microbiota intestinal. Se utilizaron además dos grupos adicionales de animales 384 (medicados) y 177 (no medicados) para estudiar el efecto de la suplementación con antibióticos en el agua de bebida sobre la mortalidad. El procesado térmico del trigo mejoró ligeramente la digestibilidad ileal del almidón (P=0.020) pero no modificó el flujo final de almidón que alcanzó el ciego, observándose una mayor frecuencia de detección de Campylobacter spp. y Ruminococcus spp. en ciego (P≤0.023), pero sin cambios a nivel ileal. El procesado térmico del trigo no afectó tampoco a los parámetros productivos, la mortalidad, la digestibilidad ileal y fecal o la morfología de la mucosa. La sustitución parcial del trigo cocido por arroz cocido, penalizó la digestibilidad ileal del almidón (P=0.020) e incrementó el flujo ileal de este nutriente al ciego (P=0.007). Sin embargo no afectó a la mortalidad, pese a que se detectaron cambios en la microbiota tanto a nivel ileal como cecal, disminuyendo la frecuencia de detección de Campylobacter spp. (en íleon y ciego), Helicobacter spp. (en íleon) y Ruminococcus spp (en ciego) e incrementando Bacteroides spp. (en ciego) (P≤0.046). El empleo de arroz cocido en las piensos post-destete no tuvieron efectos sobre los parámetros productivos, la mortalidad, la digestibilidad ileal y fecal a excepción del almidón, o la morfología de la mucosa. La suplementación con antibiótico redujo la fre cuencia de detección de la mayoría de las bacterias estudiadas (P≤0.048), sobre todo para Campylobacter spp., Clostridium perfringens y Propionibacterium spp. (P≤0.048), observándose un efecto mayor a nivel ileal que cecal, lo que se asoció a la bajada significativa (P<0.001) de la mortalidad. En conclusión, los resultados de este experimento indican que la fuente de almidón afecta a la microbiota intestinal pero no influiye sobre la salud del animal. En relación al procesado, el uso de trigo cocido junto con arroz cocido no mejora los resultados obtenidos con trigo duro, si bienserían necesarios más experimentos que confirmaran este punto. El último de los experimentos se centró en un aspecto metodológico. Dado que, los conejos destetados presentan un patrón digestivo diferente al de un animal adulto resultado de su inmadurez digestiva, el objetivo buscado era tratar de determinar el mejor procedimiento para la determinación de la digestibilidad fecal en los gazapos en la fase post-destete. Para tal fin se utilizaron 15 animales/tratamiento de tres camadas diferentes que se destetaron con 25 días, suministrándoles un pienso comercial de crecimiento-cebo. Se registró el consumo medio diario y la excreción diaria de heces desde el día 25 hasta el día 40 de edad para la determinación de la digestibilidad de la MS. La camada afectó al consumo medio diario y la excreción de heces (P=0.013 y 0.014, respectivamente), observándose una tendencia (P=0.061) en la digestibilidad. La edad afectó (P<0.001) a todos estos factores, incrementándose de manera más evidente la excreción que la ingestión de materia seca en la primera semana de vida, para aumentar de forma paralela a partir de la segunda. La correlación entre el consumo medio diario fue mayor con la excreción de heces del mismo día que con la del día siguiente, por lo que se utilizó el primero para la determinación de la digestibilidad de la MS (MSd). La MSd disminuyó de manera lineal hasta los 32 días de edad (2.17±0.25 unidades porcentuales por día), mientras que permaneció constante desde los 32 a los 40 días (69.4±0.47%). Por otro lado, la desviación estándar de la MSd se redujo cuando se incrementó el período de recogida de 2 a 6 días en un 54%. Conforme a los resultados obtenidos, se puede concluir que no es aconsejable comenzar las pruebas de digestibilidad antes de los 32 días de edad y que el número de animales necesario para detectar diferencias significativas entre tratamientos dependerá del período de recogida de heces. ABSTRACT The global aim of this thesis has been to study the effect of dietary carbohydrates on growth, performance, digestion and intestinal barrier in 25-d weaned rabbits. In addition there has also been studied which is the best period to determine the fecal digestibility after weaning. The first experiment focused on the effect of Neutral Detergent Soluble Fibre (NDSF) on gut barrier function, digestion, intestinal microbiota and growth performance n rabbits in the post-weaning period. Three isonutritive diets which only varied in the levels of soluble fiber were formulated such as it described as follows: a control diet (AH) containing 103 g of neutral detergent soluble fiber, including alfalfa as main source of fiber, was replaced by a mixture of beet and apple pulp (75-25) in the B-AP diet and, by a mix of oat hulls and soybean protein concentrate (88:12) in the OH diet, resulting 131 and 79 g of NDFS/kg of dry matter, respectively. Rabbits, weaned at 25 days of age, were fed the experimental diets up to 35 days of age, moment in which they were slaughtered for apparent ileal digestibility (AID) of dry matter (DM), crude protein (CP) and starch, mucosa morphology, sucrose activity, characterization of lamina propria lymphocytes and intestinal microbiota. To assess mucosal morphology, 19 suckling 35-d-old rabbits were also used. For mortality study, besides these animals, 118 additional rabbits per treatment were fed the experimental diets for two weeks period and thereafter received a commercial diet until 60 days of age. Rabbits were water medicated during the whole experimental period (100 ppm de apramicine sulphate and 120 ppm of tylosine tartrate). Level of soluble fiber improved all the parameters used for the characterization of the intestinal barrier condition. Villous height of the jejunal mucosa increased with dietary soluble fiber (P=0.001). Villous height of jejunal mucosa increased with dietary soluble fiber (P = 0.001). Rabbits fed the highest level of soluble fiber (BA-P diet) showed the highest villous height/crypth depth ratio (8.14; P = 0.001), sucrase specific activity (8671 μmol glucose/ g protein; P = 0.019), and the greatest ileal starch digestibility (96.8%; P = 0.002). The opposite effects were observed in rabbits fed decreased levels of soluble fiber (AH and OH diets; 4.70, 5,848 μmol of glucose/g of protein, as average, respectively). The lowest ileal starch digestibility was detected for animal fed OH diet (93.2%). Suckling rabbits of the same age showed a lower villous height/crypt depth ratio (6.70) compared with the B-AP diet group, but this ration was higher that the AH or OH diet groups. Lower levels of soluble fiber tended (P = 0.074) to increase the cellular immune response (CD8+ lymphocytes). Diet affected IL-2 production (CD25+, P = 0.029; CD5+CD25+, P = 0.057), with no clear relationship between soluble fiber and IL-2. The intestinal microbiota biodiversity was not affected by diets (P ≥ 0.38). Animals fed B-AP and AH diets had a reduced cecal frequency of detection compatible with Campylobacter spp. (20.3 vs. 37.8, P = 0.074), and Clostridium perfringens (4.3 vs. 17.6%, P = 0.047), compared with the OH diet group. Moreover, the mortality rates decreased from 14.4 (OH diet) to 5.1% (B-AP diet) with the increased presence of soluble fiber in the diet. Between 32 and 35 days of age, faecal apparent digestibility of dry matter (DM), gross energy (GE), crude protein (CP), neutral detergent fiber (NDF), acid detergent fiber (ADF) and starch was determined (14/diet). This group, plus another nine rabbits/diet were used to determine weight of stomach and caecum and their contents, cecal fermentation traits and similarity rate (SR) of intestinal microbiota. Besides, growth performance parameters (35 rabbits/diet) were studied during the whole fattening period, in animals consuming the experimental feed after the weaning up to 35 days of age and later on a commercial diet up animals reached 60 days of age. Increasing levels of Neutral Detergent Soluble Fiber improved faecal dry matter and energy digestibility (P<0.001). NDSF inclusion improved linearly weight of the caecal content (P=0.001) and the total gastrointestinal tract (P=0.008), and in the previous days to slaughter a linear decrease of daily feed intake in diet with highest level of soluble fiber was also observed. Stomach pH decreased linearly with increasing levels of NDFS (P≤0.041). No relation between NDSF level on pH, concentration and molar proportion of VFA was found. Treatments appeared to influence the similarity rate of microbiota, even higher to mother effect. These effects were higher in ileum than in caecum. A linear positive effect of feed efficiency was observed, which increased around 12% in the two weeks post-weaning (25-39d) and 3% in the whole fattening period between extreme diets with highest levels of soluble fiber. Average daily feed intake during the two weeks after weaning and in the whole fattening period, tended (P≤0.079) to increase with highest levels of NDSF; although there were no effect on daily weight gain (≥0.15). In conclusion, an increase of soluble fiber in the feed seems to be beneficial for animal health, due to improve mucose integrity and reduce detection frequency of those poten tial pathogens like C. perfringens and Campylobacter spp. According to these results, level of soluble fiber should be taking care in feed rabbit formulation in the post-weaning period. The objective of the second experiment was to determine the effect of source of starch on digestion, intestinal microbiota and growth performance in twenty-five-day old weaned rabbits. To accomplish with this aim three iso-nutritive diets were formulated with different source of starch: raw wheat, boiled wheat and a combination of boiled wheat and boiled rice. Two groups of 99 and 193 rabbits were weaned at 25 days of age. The first group was used for growth performance determination following the same protocol than in previous experiment. The second group was used to determine faecal digestibility from 32 to 35 d, apparent ileal digestibility (AID) at 35 d, jejunal mucosa morphology, caecal fermentation traits and characterization of intestinal microbiota. For mortality, two additional groups of 384 (medicated) and 177 (not medicated) were used in order to study the effect of antibiotic water supply supplementation. Heat processing of starch slightly improved ileal digestibility of starch (P=0.020) but did not modify the flow of starch to the caecum. An increase in frequency of detection of Campylobacter spp. y Ruminococcus spp. was observed in the caecum (P≤0.023), with no changes at ileal level. Heat processing of wheat did not modify growth performance, mortality, ileal or faecal digestibility and mucosa morphology. Partial substitution of boiled wheat for boiled rice in the diet impaired ileal starch digestibility (P=0.020) and increased the ileal flow of this nutrient to the caecum (P=0.007). However, it did not affect mortality rate, although changes in the ileal and caecal intestinal microbiota were detected, decreasing the frequency of detection of Campylobacter spp. (both ileum and caecum), Helicobacter spp. (at ileum) and Ruminococcus spp (at caecum) and increasing the Bacteroides spp. (at caecum) (P≤0.046). The effect of boiled rice supplementation did not alter growth performance, mortality, ileal or faecal digestibility of other nutrients than starch, and mucosa morphology. Medication of rabbits reduced the ileal frequency of detection of most bacteria studied (P≤0.048), especially for Campylobacter spp., Clostridium perfringens y Propionibacterium spp. (P≤0.048), resulting the effect higher at ileal than caecal level and relating it with a strong reduction of mortality rate (P<0.001). In conclusion, the results of this experiment make think that the source of starch affects the intestinal microbiota but they do not seem to influence animal health. In relation to the effect of heat processed the use of cooked wheat or cooked rice it does not seem to im prove the results obtained with hard wheat, but there would be necessary more experiments that were confirming this point. The last experiment focused on a methodological aspect. Considering that, weaned rabbits have a different digestive pattern than older animals due to their digestive immaturity; the fixed objective was to determine the best procedure for faecal digestibility determination in young rabbits in the post-weaning period. Fifteen rabbits from 5 different litters were weaned at 25 days of age and fed with a commercial feed. Feed intake and faeces excretion were recorded daily from 25 to 40 days of age for dry matter digestibility (DMd) determination. Litter affected daily DM intake and excretion (P=0.013 y 0.014, respectively) and tended to affect DMd (P=0.061). Age affected all these factors (P<0.001), but ingestion increased slowly than dry matter excretion during the first week buth they evolved similarly in the second week. The correlation between daily feed intakes was higher with the faeces excretion of the day than with faeces excretion of the next day, and the first values were used to determine daily DMd. The DMd decreased linearly from weaning to 32 d of age (2.17±0.25 percentage units per day), whereas from 32 to 40 d remained constant (69.4±0.47%). On the other hand, average standard deviation of DMd decreased by 54% when the length of collection period increased from 2 to 6d. Consequently to the obtained results, it could be concluded that it would not be advisable to start digestibility trials before the 32 days of age and that the number of animals required to detect a significant difference among means would depend on the collection period.

Multiscale Modeling of Composites: Toward Virtual Testing ... and Beyond

Recent developments in the area of multiscale modeling of fiber-reinforced polymers are presented. The overall strategy takes advantage of the separa-tion of length scales between different entities (ply, laminate, and component) found in composite structures. This allows us to carry out multiscale modeling by computing the properties of one entity (e.g., individual plies) at the relevant length scale, homogenizing the results into a constitutive model, and passing this information to the next length scale to determine the mechanical behavior of the larger entity (e.g., laminate). As a result, high-fidelity numerical sim-ulations of the mechanical behavior of composite coupons and small compo-nents are nowadays feasible starting from the matrix, fiber, and interface properties and spatial distribution. Finally, the roadmap is outlined for extending the current strategy to include functional properties and processing into the simulation scheme.

Smart aeronautical structures: development and experimental validation of a structural health monitoring system for damage detection

En muchas áreas de la ingeniería, la integridad y confiabilidad de las estructuras son aspectos de extrema importancia. Estos son controlados mediante el adecuado conocimiento de danos existentes. Típicamente, alcanzar el nivel de conocimiento necesario que permita caracterizar la integridad estructural implica el uso de técnicas de ensayos no destructivos. Estas técnicas son a menudo costosas y consumen mucho tiempo. En la actualidad, muchas industrias buscan incrementar la confiabilidad de las estructuras que emplean. Mediante el uso de técnicas de última tecnología es posible monitorizar las estructuras y en algunos casos, es factible detectar daños incipientes que pueden desencadenar en fallos catastróficos. Desafortunadamente, a medida que la complejidad de las estructuras, los componentes y sistemas incrementa, el riesgo de la aparición de daños y fallas también incrementa. Al mismo tiempo, la detección de dichas fallas y defectos se torna más compleja. En años recientes, la industria aeroespacial ha realizado grandes esfuerzos para integrar los sensores dentro de las estructuras, además de desarrollar algoritmos que permitan determinar la integridad estructural en tiempo real. Esta filosofía ha sido llamada “Structural Health Monitoring” (o “Monitorización de Salud Estructural” en español) y este tipo de estructuras han recibido el nombre de “Smart Structures” (o “Estructuras Inteligentes” en español). Este nuevo tipo de estructuras integran materiales, sensores, actuadores y algoritmos para detectar, cuantificar y localizar daños dentro de ellas mismas. Una novedosa metodología para detección de daños en estructuras se propone en este trabajo. La metodología está basada en mediciones de deformación y consiste en desarrollar técnicas de reconocimiento de patrones en el campo de deformaciones. Estas últimas, basadas en PCA (Análisis de Componentes Principales) y otras técnicas de reducción dimensional. Se propone el uso de Redes de difracción de Bragg y medidas distribuidas como sensores de deformación. La metodología se validó mediante pruebas a escala de laboratorio y pruebas a escala real con estructuras complejas. Los efectos de las condiciones de carga variables fueron estudiados y diversos experimentos fueron realizados para condiciones de carga estáticas y dinámicas, demostrando que la metodología es robusta ante condiciones de carga desconocidas. ABSTRACT In many engineering fields, the integrity and reliability of the structures are extremely important aspects. They are controlled by the adequate knowledge of existing damages. Typically, achieving the level of knowledge necessary to characterize the structural integrity involves the usage of nondestructive testing techniques. These are often expensive and time consuming. Nowadays, many industries look to increase the reliability of the structures used. By using leading edge techniques it is possible to monitoring these structures and in some cases, detect incipient damage that could trigger catastrophic failures. Unfortunately, as the complexity of the structures, components and systems increases, the risk of damages and failures also increases. At the same time, the detection of such failures and defects becomes more difficult. In recent years, the aerospace industry has done great efforts to integrate the sensors within the structures and, to develop algorithms for determining the structural integrity in real time. The ‘philosophy’ has being called “Structural Health Monitoring” and these structures have been called “smart structures”. These new types of structures integrate materials, sensors, actuators and algorithms to detect, quantify and locate damage within itself. A novel methodology for damage detection in structures is proposed. The methodology is based on strain measurements and consists in the development of strain field pattern recognition techniques. The aforementioned are based on PCA (Principal Component Analysis) and other dimensional reduction techniques. The use of fiber Bragg gratings and distributed sensing as strain sensors is proposed. The methodology have been validated by using laboratory scale tests and real scale tests with complex structures. The effects of the variable load conditions were studied and several experiments were performed for static and dynamic load conditions, demonstrating that the methodology is robust under unknown load conditions.

Application of NMR techniques for the evaluation of fruit internal quality and physical properties of food

Los alimentos son sistemas complejos, formados por diversas estructuras a diferentes escalas: macroscópica y microscópica. Muchas propiedades de los alimentos, que son importantes para su procesamiento, calidad y tratamiento postcosecha, están relacionados con su microestructura. La presente tesis doctoral propone una metodología completa para la determinación de la estructura de alimentos desde un punto de vista multi-escala, basándose en métodos de Resonancia Magnética Nuclear (NMR). Las técnicas de NMR son no invasivas y no destructivas y permiten el estudio tanto de macro- como de microestructura. Se han utilizado distintos procedimientos de NMR dependiendo del nivel que se desea estudiar. Para el nivel macroestructural, la Imagen de Resonancia Magnética (MRI) ha resultado ser muy útil para la caracterización de alimentos. Para el estudio microestructural, la MRI requiere altos tiempos de adquisición, lo que hace muy difícil la transferencia de esta técnica a aplicaciones en industria. Por tanto, la optimización de procedimientos de NMR basados en secuencias relaxometría 2D T1/T2 ha resultado ser una estrategia primordial en esta tesis. Estos protocolos de NMR se han implementado satisfactoriamente por primera vez en alto campo magnético. Se ha caracterizado la microestructura de productos alimentarios enteros por primera vez utilizando este tipo de protocolos. Como muestras, se han utilizado dos tipos de productos: modelos de alimentos y alimentos reales (manzanas). Además, como primer paso para su posterior implementación en la industria agroalimentaria, se ha mejorado una línea transportadora, especialmente diseñada para trabajar bajo condiciones de NMR en trabajos anteriores del grupo LPF-TAGRALIA. Se han estudiado y seleccionado las secuencias más rápidas y óptimas para la detección de dos tipos de desórdenes internos en manzanas: vitrescencia y roturas internas. La corrección de las imágenes en movimiento se realiza en tiempo real. Asimismo, se han utilizado protocolos de visión artificial para la clasificación automática de manzanas potencialmente afectadas por vitrescencia. El presente documento está dividido en diferentes capítulos: el Capítulo 2 explica los antecedentes de la presente tesis y el marco del proyecto en el que se ha desarrollado. El Capítulo 3 recoge el estado del arte. El Capítulo 4 establece los objetivos de esta tesis doctoral. Los resultados se dividen en cinco sub-secciones (dentro del Capítulo 5) que corresponden con los trabajos publicados bien en revistas revisadas por pares, bien en congresos internacionales o bien como capítulos de libros revisados por pares. La Sección 5.1. es un estudio del desarrollo de la vitrescencia en manzanas mediante MRI y lo relaciona con la posición de la fruta dentro de la copa del árbol. La Sección 5.2 presenta un trabajo sobre macro- y microestructura en modelos de alimentos. La Sección 5.3 es un artículo en revisión en una revista revisada por pares, en el que se hace un estudio microestrcutural no destructivo mediante relaxometría 2D T1/T2. la Sección 5.4, hace una comparación entre manzanas afectadas por vitrescencia mediante dos técnicas: tomografía de rayos X e MRI, en manzana. Por último, en la Sección 5.5 se muestra un trabajo en el que se hace un estudio de secuencias de MRI en línea para la evaluación de calidad interna en manzanas. Los siguientes capítulos ofrecen una discusión y conclusiones (Capítulo 6 y 7 respectivamente) de todos los capítulos de esta tesis doctoral. Finalmente, se han añadido tres apéndices: el primero con una introducción de los principios básicos de resonancia magnética nuclear (NMR) y en los otros dos, se presentan sendos estudios sobre el efecto de las fibras en la rehidratación de cereales de desayuno extrusionados, mediante diversas técnicas. Ambos trabajos se presentaron en un congreso internacional. Los resultados más relevantes de la presente tesis doctoral, se pueden dividir en tres grandes bloques: resultados sobre macroestructura, resultados sobre microestructura y resultados sobre MRI en línea. Resultados sobre macroestructura: - La imagen de resonancia magnética (MRI) se aplicó satisfactoriamente para la caracterización de macroestructura. En particular, la reconstrucción 3D de imágenes de resonancia magnética permitió identificar y caracterizar dos tipos distintos de vitrescencia en manzanas: central y radial, que se caracterizan por el porcentaje de daño y la conectividad (número de Euler). - La MRI proveía un mejor contraste para manzanas afectadas por vitrescencia que las imágenes de tomografía de rayos X (X-Ray CT), como se pudo verificar en muestras idénticas de manzana. Además, el tiempo de adquisición de la tomografía de rayos X fue alrededor de 12 veces mayor (25 minutos) que la adquisición de las imágenes de resonancia magnética (2 minutos 2 segundos). Resultados sobre microestructura: - Para el estudio de microestructura (nivel subcelular) se utilizaron con éxito secuencias de relaxometría 2D T1/T2. Estas secuencias se usaron por primera vez en alto campo y sobre piezas de alimento completo, convirtiéndose en una forma no destructiva de llevar a cabo estudios de microestructura. - El uso de MRI junto con relaxometría 2D T1/T2 permite realizar estudios multiescala en alimentos de forma no destructiva. Resultados sobre MRI en línea: - El uso de imagen de resonancia magnética en línea fue factible para la identificación de dos tipos de desórdenes internos en manzanas: vitrescencia y podredumbre interna. Las secuencias de imagen tipo FLASH resultaron adecuadas para la identificación en línea de vitrescencia en manzanas. Se realizó sin selección de corte, debido a que la vitrescencia puede desarrollarse en cualquier punto del volumen de la manzana. Se consiguió reducir el tiempo de adquisición, de modo que se llegaron a adquirir 1.3 frutos por segundos (758 ms por fruto). Las secuencias de imagen tipo UFLARE fueron adecuadas para la detección en línea de la podredumbre interna en manzanas. En este caso, se utilizó selección de corte, ya que se trata de un desorden que se suele localizar en la parte central del volumen de la manzana. Se consiguió reducir el tiempo de adquisicón hasta 0.67 frutos por segundo (1475 ms por fruto). En ambos casos (FLASH y UFLARE) fueron necesarios algoritmos para la corrección del movimiento de las imágenes en tiempo real. ABSTRACT Food is a complex system formed by several structures at different scales: macroscopic and microscopic. Many properties of foods that are relevant to process engineering or quality and postharvest treatments are related to their microstructure. This Ph.D Thesis proposes a complete methodology for food structure determination, in a multiscale way, based on the Nuclear Magnetic Resonance (NMR) phenomenon since NMR techniques are non-invasive and non-destructive, and allow both, macro- and micro-structure study. Different NMR procedures are used depending on the structure level under study. For the macrostructure level, Magnetic Resonance Imaging (MRI) revealed its usefulness for food characterization. For microstructure insight, MRI required high acquisition times, which is a hindrance for transference to industry applications. Therefore, optimization of NMR procedures based on T1/T2 relaxometry sequences was a key strategy in this Thesis. These NMR relaxometry protocols, are successfully implemented in high magnetic field. Microstructure of entire food products have been characterized for the first time using these protocols. Two different types of food products have been studied: food models and actual food (apples). Furthermore, as a first step for the food industry implementation, a grading line system, specially designed for working under NMR conditions in previous works of the LPF-TAGRALIA group, is improved. The study and selection of the most suitable rapid sequence to detect two different types of disorders in apples (watercore and internal breakdown) is performed and the real time image motion correction is applied. In addition, artificial vision protocols for the automatic classification of apples potentially affected by watercore are applied. This document is divided into seven different chapters: Chapter 2 explains the thesis background and the framework of the project in which it has been worked. Chapter 3 comprises the state of the art. Chapter 4 establishes de objectives of this Ph.D thesis. The results are divided into five different sections (in Chapter 5) that correspond to published peered reviewed works. Section 5.1 assesses the watercore development in apples with MRI and studies the effect of fruit location in the canopy. Section 5.2 is an MRI and 2D relaxometry study for macro- and microstructure assessment in food models. Section 5.3 is a non-destructive microstructural study using 2D T1/T2 relaxometry on watercore affected apples. Section 5.4 makes a comparison of X-ray CT and MRI on watercore disorder of different apple cultivars. Section 5.5, that is a study of online MRI sequences for the evaluation of apple internal quality. The subsequent chapters offer a general discussion and conclusions (Chapter 6 and Chapter 7 respectively) of all the works performed in the frame of this Ph.D thesis (two peer reviewed journals, one book chapter and one international congress).Finally, three appendices are included in which an introduction to NMR principles is offered and two published proceedings regarding the effect of fiber on the rehydration of extruded breakfast cereal are displayed. The most relevant results can be summarized into three sections: results on macrostructure, results on microstructure and results on on-line MRI. Results on macrostructure: - MRI was successfully used for macrostructure characterization. Indeed, 3D reconstruction of MRI in apples allows to identify two different types of watercore (radial and block), which are characterized by the percentage of damage and the connectivity (Euler number). - MRI provides better contrast for watercore than X-Ray CT as verified on identical samples. Furthermore, X-Ray CT images acquisition time was around 12 times higher (25 minutes) than MRI acquisition time (2 minutes 2 seconds). Results on microstructure: - 2D T1/T2 relaxometry were successfully applied for microstructure (subcellular level) characterization. 2D T1/T2 relaxometry sequences have been applied for the first time on high field for entire food pieces, being a non-destructive way to achieve microstructure study. - The use of MRI together with 2D T1/T2 relaxometry sequences allows a non-destructive multiscale study of food. Results on on-line MRI: - The use of on-line MRI was successful for the identification of two different internal disorders in apples: watercore and internal breakdown. FLASH imaging was a suitable technique for the on-line detection of watercore disorder in apples, with no slice selection, since watercore is a physiological disorder that may be developed anywhere in the apple volume. 1.3 fruits were imaged per second (768 ms per fruit). UFLARE imaging is a suitable sequence for the on-line detection of internal breakdown disorder in apples. Slice selection was used, as internal breakdown is usually located in the central slice of the apple volume. 0.67 fruits were imaged per second (1475 ms per fruit). In both cases (FLASH and UFLARE) motion correction was performed in real time, during the acquisition of the images.

Mechanical properties up to 1900 K of Al2O3/Er3Al5O12/ZrO2 eutectic ceramics grown by the laser floating zone method

Directionally solidified Al2O3–Er3Al5O12–ZrO2 eutectic rods were processed using the laser floating zone method at growth rates of 25, 350and 750 mm/h to obtain microstructures with different domain size. The mechanical properties were investigated as a function of the processing rate. The hardness, 15.6 GPa, and the fracture toughness, 4 MPa m1/2, obtained from Vickers indentation at room temperature were practically independent of the size of the eutectic phases. However, the flexural strength increased as the domain size decreased, reaching outstanding strength values close to 3 GPa in the samples grown at 750 mm/h. A high retention of the flexural strength was observed up to 1500 K in the materials processed at 25 and 350 mm/h, while superplastic behaviour was observed at 1700 K in the eutectic rods solidified at the highest rate of 750 mm/h

Role of fibre in broiler diets - Firend or foe?

The fibrous fraction of the feeds encompasses a group of heterogeneous compounds differing in chemical composition and physical properties (Graham and Aman, 1991, Bach Knudsen, 2001). Dietary fiber is the most used term to define the fiber fraction of ingredients and feeds, and includes cell walls, stored non-starch polysaccharides (NSP), and lignin (Bach Knudsen, 2001). Based on their physico-chemical properties, DF can be divided into soluble and insoluble fractions with distinct effects on digestive physiology and animal metabolism. Consequently, the benefits of fiber inclusion in poultry diets will vary depending on factors such as characteristics of the fiber source, type of bird, and digestive health status.

Is the polarity of content producers strongly influenced by the results of the event?

This paper presents an approach to compare two types of data, subjective data (Polarity of Pan American Games 2011 event by country) and objective data (the number of medals won by each participating country), based on the Pearson corre- lation. When dealing with events described by people, knowledge acquisition is difficult because their structure is heterogeneous and subjective. A first step towards knowing the polarity of the information provided by people consists in automatically classifying the posts into clusters according to their polarity. The authors carried out a set of experiments using a corpus that consists of 5600 posts extracted from 168 Internet resources related to a specific event: the 2011 Pan American games. The approach is based on four components: a crawler, a filter, a synthesizer and a polarity analyzer. The PanAmerican approach automatically classifies the polarity of the event into clusters with the following results: 588 positive, 336 neutral, and 76 negative. Our work found out that the polarity of the content produced was strongly influenced by the results of the event with a correlation of .74. Thus, it is possible to conclude that the polarity of content is strongly affected by the results of the event. Finally, the accuracy of the PanAmerican approach is: .87, .90, and .80 according to the precision of the three classes of polarity evaluated.

Segregation of viral plasmids depends on tethering to chromosomes and is regulated by phosphorylation

Eukaryotic viruses can maintain latency in dividing cells as extrachromosomal nuclear plasmids. Segregation and nuclear retention of DNA is, therefore, a key issue in retaining copy number. The E2 enhancer protein of the papillomaviruses is required for viral DNA replication and transcription. Viral mutants that prevent phosphorylation of the bovine papillomavirus type 1 (BPV) E2 protein are transformation-defective, despite normal viral gene expression and replication function. Cell colonies harboring such mutants show sectoring of viral DNA and are unable to maintain the episome. We find that transforming viral DNA attaches to mitotic chromosomes, in contrast to the mutant genome encoding the E2 phosphorylation mutant. Second-site suppressor mutations were uncovered in both E1 and E2 genes that allow for transformation, maintenance, and chromosomal attachment. E2 protein was also found to colocalize to mitotic chromosomes, whereas the mutant did not, suggesting a direct role for E2 in viral attachment to chromosomes. Such viral hitch-hiking onto cellular chromosomes is likely to provide a general mechanism for maintaining nuclear plasmids.

Structural homologies with ATP- and folate-binding enzymes in the crystal structure of folylpolyglutamate synthetase

Folylpolyglutamate synthetase, which is responsible for the addition of a polyglutamate tail to folate and folate derivatives, is an ATP-dependent enzyme isolated from eukaryotic and bacterial sources, where it plays a key role in the retention of the intracellular folate pool. Here, we report the 2.4-Å resolution crystal structure of the MgATP complex of the enzyme from Lactobacillus casei. The structural analysis reveals that folylpolyglutamate synthetase is a modular protein consisting of two domains, one with a typical mononucleotide-binding fold and the other strikingly similar to the folate-binding enzyme dihydrofolate reductase. We have located the active site of the enzyme in a large interdomain cleft adjacent to an ATP-binding P-loop motif. Opposite this site, in the C domain, a cavity likely to be the folate binding site has been identified, and inspection of this cavity and the surrounding protein structure suggests that the glutamate tail of the substrate may project into the active site. A further feature of the structure is a well defined Ω loop, which contributes both to the active site and to interdomain interactions. The determination of the structure of this enzyme represents the first step toward the elucidation of the molecular mechanism of polyglutamylation of folates and antifolates.