Eliminating Software Failures - A Literature Survey

Software faults are expensive and cause serious damage, particularly if discovered late or not at all. Some software faults tend to be hidden. One goal of the thesis is to figure out the status quo in the field of software fault elimination since there are no recent surveys of the whole area. Basis for a structural framework is proposed for this unstructured field, paying attention to compatibility and how to find studies. Bug elimination means are surveyed, including bug knowhow, defect prevention and prediction, analysis, testing, and fault tolerance. The most common research issues for each area are identified and discussed, along with issues that do not get enough attention. Recommendations are presented for software developers, researchers, and teachers. Only the main lines of research are figured out. The main emphasis is on technical aspects. The survey was done by performing searches in IEEE, ACM, Elsevier, and Inspect databases. In addition, a systematic search was done for a few well-known related journals from recent time intervals. Some other journals, some conference proceedings and a few books, reports, and Internet articles have been investigated, too. The following problems were found and solutions for them discussed. Quality assurance is testing only is a common misunderstanding, and many checks are done and some methods applied only in the late testing phase. Many types of static review are almost forgotten even though they reveal faults that are hard to be detected by other means. Other forgotten areas are knowledge of bugs, knowing continuously repeated bugs, and lightweight means to increase reliability. Compatibility between studies is not always good, which also makes documents harder to understand. Some means, methods, and problems are considered method- or domain-specific when they are not. The field lacks cross-field research.

Utilización de software de corrección automática en el campo de las ciencias de la salud

We live in an era of profound changes in university education. The implementation of Bologna plan has led us to raise new teaching methodologies, to review the role of the student, competency assessment, the incorporation of ICT. Unthinkable acts, one or two decade ago. The TIC concept is very broad and is attributed to the media, processes and content usage. Inside the supports and platforms, we stress tools that allow automatic correction of exercises, because they are instruments of great educational value because instantly they assess students and provide instant feedback about the knowledge that they have either as message support or note. If the power of these tools, we add the Internet, using e-learning environment, the results allow us to work, edit, evaluate, resolve doubts, and so on, anywhere, anytime. We present part of a platform and the results of its use in the field of health sciences

International Partner Management in the Software Industry

The purpose of this research is to describe how the scope of internationalization affects partner management in software companies. The effects are analyzed separately for small and large companies. Partner management is described from three perspectives: who should manage partnerships, how they should be managed and how does the context affect the choice of management style. Inductive case study is selected as research design. Eventually four case companies are chosen. The findings reveal that the size of the company affects the volume whereas the scope of internationalization affects the choice of partner management activities. Companies with high scope of internationalization required a more formal yet flexible management system whereas companies with low scope of internationalization relied more on the informal relations and personal management.

A Comparative Study of Desktop, Fishtank, and Cave Systems for the Exploration of Volume Rendered Confocal Data Sets

We present a participant study that compares biological data exploration tasks using volume renderings of laser confocal microscopy data across three environments that vary in level of immersion: a desktop, fishtank, and cave system. For the tasks, data, and visualization approach used in our study, we found that subjects qualitatively preferred and quantitatively performed better in the cave compared with the fishtank and desktop. Subjects performed real-world biological data analysis tasks that emphasized understanding spatial relationships including characterizing the general features in a volume, identifying colocated features, and reporting geometric relationships such as whether clusters of cells were coplanar. After analyzing data in each environment, subjects were asked to choose which environment they wanted to analyze additional data sets in - subjects uniformly selected the cave environment.

Estudi de software lliure en diferents entorns

El software lliure està tenint últimament un pes cada cop més important en les empreses, però encara és el gran desconegut per a molta gent. Des de la seva creació als anys 80 fins ara, hi ha hagut un creixement exponencial de software lliure de gran qualitat, oferint eines per a tot tipus de necessitats, eines ofimàtiques, gestors de correu, sistemes de fitxer, sistemes operatius…. Tot aquest moviment no ha passat desapercebut per a molts usuaris i empreses, que s’han aprofitat d’ell per cobrir les seves necessitats. Pel que fa a les empreses, cada cop n’hi ha més que en petita o gran mesura, utilitzen el software lliure, ja sigui per el seu menor cost d’adquisició, o bé per la seva gran fiabilitat o per que és fàcilment adaptable o per no establir cap lligam tecnològic, en definitiva per tenir més llibertat. En el moment de la creació d’una nova empresa, on es parteix de zero en tota la tecnologia informàtica, és el moment menys costòs d’implementar l’arquitectura informàtica amb software lliure, és quan l’impacte que té sobre l’empresa, usuaris i clients és menor. En les empreses que ja tenen un sistema informàtic, caldrà establir un pla de migració, ja sigui total o parcial. La finalitat d’aquest projecte no és la de dir quin software és millor que l’altre o de dir quin s’ha d’instal•lar, sinó el de donar a conèixer el món del software lliure, mostrar part d’aquest software, fer alguna comparativa de software lliure amb software propietari, donant idees i un conjunt de solucions per a empreses, per què una empresa pugui agafar idees d’implementació d’algunes de les solucions informàtiques exposades o seguir algun dels consells proposats. Actualment ja hi ha moltes empreses que utilitzen software lliure. Algunes només n’utilitzen una petita part en les seves instal•lacions, ja que el fet de que una empresa funcioni al 100% amb software lliure, tot i que n’hi comença ha haver, de moment ho considero una mica arriscat, però que en poc temps, aquest fet serà cada cop més habitual.

Desenvolupament d'un sistema de transferència de software per una placa entrenadora

El departament d’electrònica i telecomunicacions de la Universitat de Vic ha dissenyat un conjunt de plaques entrenadores amb finalitat educativa. Perquè els alumnes puguin utilitzar aquestes plaques com a eina d’estudi, és necessari disposar d’un sistema de gravació econòmic i còmode. La major part dels programadors, en aquest cas, no compleixen amb aquests requeriments. L’objectiu d’aquest projecte és dissenyar un sistema de programació que utilitzi la comunicació sèrie i que no requereixi d'un hardware ni software específics. D’aquesta manera, obtenim una placa autònoma i un programador gratuït, de muntatge ràpid i simple d’utilitzar. El sistema de gravació dissenyat s’ha dividit en tres blocs. Per una banda, un programa que anomenem “programador” encarregat de transferir codi de programa des de l’ordinador al microcontrolador de la placa entrenadora. Per altra banda, un programa anomenat “bootloader”, situat al microcontrolador, permet rebre aquest codi de programa i emmagatzemar-lo a les direccions de memòria de programa corresponents. Com a tercer bloc, s’implementa un protocol de comunicació i un sistema de control d’errors per tal d’assegurar una correcta comunicació entre el “programador” i el “bootloader”. Els objectius d’aquest projecte s’han complert i per les proves realitzades, el sistema de programació ha funcionat correctament.

Software per al cronometratge de temps mitjançant sensors digitals

L’Slot, conegut per tots amb el nom d’Scalextric, s’ha implantat com a una forma d’oci habitual, la pràctica del qual no queda restringida als més petits, sinó que cada vegada crea més afició entre els grans. El fet que l’Slot s’hagi extès entre els adults n’ha revolucionat la pràctica. L’entrada al mercat de l’Slot de gent adulta, i amb poder adquisitiu molt superior als adolescents, ha provocat que les marques especialitzades vagin evolucionant els seus productes cada vegada més. Totes les marques s’han vist obligades a desenvolupar vehicles més competitius i alhora treure al mercat accessoris que augmentin la realitat del joc. Una de les necessitats que s’ha creat és la de competir entre jugadors. Aquesta competició tan pot ser en forma de carrera entre diversos participants, com de forma individual, cronometrant el temps de cada participant en un circuit. L’objectiu principal del projecte és crear un sistema capaç de realitzar cronometratges en temps real mitjançant sensors digitals ja existents en el mercat de l’Slot i poder controlar i visualitzar la informació des d’un PC. Per a poder captar els senyals dels sensors s’ha utilitzat un sistema microcontrolat, que garanteix gran velocitat d’adquisició, processament de dades i transmissió. La comunicació del Microcontrolador amb el PC s’ha realizat mitjançant el bus USB. El PC serà el controlador del sistema i donarà les ordres al Microcontrolador, podent així tenir control total sobre el funcionament del programa. També serà el PC el que tractarà els crocometratges enregistrats i els mostrarà per pantalla

Implementació de la metodologia Scrum en una empresa de desenvolupament de Software

L’organització de la producció és sempre un factor clau en qualsevol empresa. No hi ha cap fórmula magistral que pugui servir per a tothom, perquè aquesta és molt depenent del sector i de la mida. Softvic S.A., l’empresa on treballo, em va demanar que implantés un sistema d’organització adequat a una empresa de desenvolupament de Software. Les empreses d’aquesta tipologia tenen dues característiques diferenciadores respecte una empresa de fabricació: les feines es fan una única vegada i es redefineixen freqüentment els projectes a fer al futur. És a dir, els requisits són inestables i requereixen rapidesa i flexibilitat. Actualment, Softvic S.A. ja té la ISO 9001:2008 al departament de programació. Aquesta ISO contempla com es creen les ordres de programació (OP) i ordres d’incidència (OI) i com es registra i avalua la feina realitzada. L’objectiu és implantar una metodologia que s’encarregui de la part anterior a aquesta, és a dir, definir les feines a fer en un període. Això s’ha d’integrar perfectament amb la part ja recolzada per la ISO. Per aquest fet es va escollir la metodologia Scrum que complia tots els requisits esmentats i estava contrastada per diferents empreses del món del Software. Primerament es van fer proves en les quals es guardava la informació en un Excel i s’imprimien manualment les feines a realitzar. Un cop es va haver decidit quina informació era útil i quina no en el cas de Softvic, es va crear una base de dades amb les taules i camps necessaris. Per treballar de forma més còmoda es va fer posteriorment un programa per a mantenir les dades i un formulari per imprimir etiquetes. A mesura que hem anat utilitzant la metodologia Scrum, hem anat ajustant aspectes cap on hem cregut convenient pel nostre cas en particular.

Remote Condition Monitoring and Asset Management in Offshore Power Systems

Condition monitoring systems for physical assets are constantly becoming more and more common in the industrial sector. At the same time an increasing portion of asset monitoring systems are being remotely supported. As global competitors are actively developing solutions for condition monitoring and condition-based maintenance, which it enables, Wärtsilä too feels the pressure to provide customers with more sophisticated condition-based maintenance solutions. The main aim of this thesis study is to consider Wärtsilä remote condition monitoring solutions and how they relate to similar solutions from other suppliers and end customers’ needs, in the context of offshore assets. A theoretical study is also included in the thesis, where the concepts of condition monitoring, condition-based maintenance, maintenance management and physical asset management are introduced.

Introducing Continuous Integration for C and C++ Software Development Projects on Linux Platform

Software integration is a stage in a software development process to assemble separate components to produce a single product. It is important to manage the risks involved and being able to integrate smoothly, because software cannot be released without integrating it first. Furthermore, it has been shown that the integration and testing phase can make up 40 % of the overall project costs. These issues can be mitigated by using a software engineering practice called continuous integration. This thesis work presents how continuous integration is introduced to the author's employer organisation. This includes studying how the continuous integration process works and creating the technical basis to start using the process on future projects. The implemented system supports software written in C and C++ programming languages on Linux platform, but the general concepts can be applied to any programming language and platform by selecting the appropriate tools. The results demonstrate in detail what issues need to be solved when the process is acquired in a corporate environment. Additionally, they provide an implementation and process description suitable to the organisation. The results show that continuous integration can reduce the risks involved in a software process and increase the quality of the product as well.

Quality standards in e-business software development

Large enterprises have for many years employed eBusiness solutions in order to improve their efficiency. Smaller companies, however, have not been able to leverage these technologies due to the high level of know-how and resources required in implementing them. To solve this, novel software services are being developed to facilitate eBusiness adoption for the small enterprise with the aim of making B2Bi feasible not only between large organisations but also between trading partners of all sizes. The objective of this study was to find what standards and techniques on eBusiness and software testing and quality assurance fit best for building these new kinds of software considering the requirements their unique eBusiness approach poses. The research was conducted as a literature study with focus on standards on software testing and quality assurance together with standards on eBusiness. The study showed that the current software testing and quality assurance standards do not possess such characteristics as would make select standards evidently better fitted for building this type of software, which were established to be best developed as web services in order for them to meet their requirements. A selection of eBusiness standards and technologies was proposed to support this approach. The main finding in the study was, however, that these kinds of web services that have high interoperability requirements will have to be able to carry out automated interoperability and conformance testing as part of their operation; this objective dictates how the software are built and how testing during software development is to be done. The study showed that research on automated interoperability and conformance testing for web services is still limited and more research is needed to make the building of highly-interoperable web services more feasible.

Challenges and Means for the Front End Activities of Software Development

The front end of innovation is regarded as one of the most important steps in building new software products or services, and the most significant benefits in software development can be achieved through improvements in the front end activities. Problems in the front end phase have an impact on customer dissatisfaction with delivered software, and on the effectiveness of the entire software development process. When these processes are improved, the likelihood of delivering high quality software and business success increases. This thesis highlights the challenges and problems related to the early phases of software development, and provides new methods and tools for improving performance in the front end activities of software development. The theoretical framework of this study comprises two fields of research. The first section belongs to the field of innovation management, and especially to the management of the early phases of the innovation process, i.e. the front end of innovation. The second section of the framework is closely linked to the processes of software engineering, especially to the early phases of the software development process, i.e. the practice of requirements engineering. Thus, this study extends the theoretical knowledge and discloses the differences and similarities in these two fields of research. In addition, this study opens up a new strand for academic discussion by connecting these research directions. Several qualitative business research methodologies have been utilized in the individual publications to solve the research questions. The theoretical and managerial contribution of the study can be divided into three areas: 1) processes and concepts, 2) challenges and development needs, and 3) means and methods for the front end activities of software development. First, the study discloses the difference and similarities between the concepts of the front end of innovation and requirements engineering, and proposes a new framework for managing the front end of the software innovation process, bringing business and innovation perspectives into software development. Furthermore, the study discloses managerial perceptions of the similarities and differences in the concept of the front end of innovation between the software industry and the traditional industrial sector. Second, the study highlights the challenges and development needs in the front end phase of software development, especially challenges in communication, such as linguistic problems, ineffective communication channels, a communication gap between users/customers and software developers, and participation of multiple persons in software development. Third, the study proposes new group methods for improving the front end activities of software development, especially customer need assessment, and the elicitation of software requirements.

Inversion and assimilation methods with applications in geophysical remote sensing

Stratospheric ozone can be measured accurately using a limb scatter remote sensing technique at the UV-visible spectral region of solar light. The advantages of this technique includes a good vertical resolution and a good daytime coverage of the measurements. In addition to ozone, UV-visible limb scatter measurements contain information about NO2, NO3, OClO, BrO and aerosols. There are currently several satellite instruments continuously scanning the atmosphere and measuring the UVvisible region of the spectrum, e.g., the Optical Spectrograph and Infrared Imager System (OSIRIS) launched on the Odin satellite in February 2001, and the Scanning Imaging Absorption SpectroMeter for Atmospheric CartograpHY (SCIAMACHY) launched on Envisat in March 2002. Envisat also carries the Global Ozone Monitoring by Occultation of Stars (GOMOS) instrument, which also measures limb-scattered sunlight under bright limb occultation conditions. These conditions occur during daytime occultation measurements. The global coverage of the satellite measurements is far better than any other ozone measurement technique, but still the measurements are sparse in the spatial domain. Measurements are also repeated relatively rarely over a certain area, and the composition of the Earth’s atmosphere changes dynamically. Assimilation methods are therefore needed in order to combine the information of the measurements with the atmospheric model. In recent years, the focus of assimilation algorithm research has turned towards filtering methods. The traditional Extended Kalman filter (EKF) method takes into account not only the uncertainty of the measurements, but also the uncertainty of the evolution model of the system. However, the computational cost of full blown EKF increases rapidly as the number of the model parameters increases. Therefore the EKF method cannot be applied directly to the stratospheric ozone assimilation problem. The work in this thesis is devoted to the development of inversion methods for satellite instruments and the development of assimilation methods used with atmospheric models.

Polarímetro virtual: desenvolvimento, utilização e avaliação de um software educacional

Optical activity is the ability of chiral substances to rotate the plane of plane-polarized light and is measured using an instrument called a polarimeter. An educational software application to explore, both interactively and visually, the concepts related to polarimetry to facilitate their understanding was developed. The software was field-tested and a questionnaire evaluating the graphics interface, usability and the software as an educational tool, was answered by students. The results characterized the computer application developed as an auxiliary tool for assisting teachers in lectures and students in the learning process.