Scanning Laser Optical Tomography Resolves Structural Plasticity during Regeneration in an Insect Brain

Background: Optical Projection Tomography (OPT) is a microscopic technique that generates three dimensional images from whole mount samples the size of which exceeds the maximum focal depth of confocal laser scanning microscopes. As an advancement of conventional emission-OPT, Scanning Laser Optical Tomography (SLOTy) allows simultaneous detection of fluorescence and absorbance with high sensitivity. In the present study, we employ SLOTy in a paradigm of brain plasticity in an insect model system. Methodology: We visualize and quantify volumetric changes in sensory information procession centers in the adult locust, Locusta migratoria. Olfactory receptor neurons, which project from the antenna into the brain, are axotomized by crushing the antennal nerve or ablating the entire antenna. We follow the resulting degeneration and regeneration in the olfactory centers (antennal lobes and mushroom bodies) by measuring their size in reconstructed SLOTy images with respect to the untreated control side. Within three weeks post treatment antennal lobes with ablated antennae lose as much as 60% of their initial volume. In contrast, antennal lobes with crushed antennal nerves initially shrink as well, but regain size back to normal within three weeks. The combined application of transmission-and fluorescence projections of Neurobiotin labeled axotomized fibers confirms that recovery of normal size is restored by regenerated afferents. Remarkably, SLOTy images reveal that degeneration of olfactory receptor axons has a trans-synaptic effect on second order brain centers and leads to size reduction of the mushroom body calyx. Conclusions: This study demonstrates that SLOTy is a suitable method for rapid screening of volumetric plasticity in insect brains and suggests its application also to vertebrate preparations.

Biomimetic Scaffold with Aligned Microporosity Designed for Dentin Regeneration

Tooth loss is a common result of a variety of oral diseases due to physiological causes, trauma, genetic disorders, and aging and can lead to physical and mental suffering that markedly lowers the individual’s quality of life. Tooth is a complex organ that is composed of mineralized tissues and soft connective tissues. Dentin is the most voluminous tissue of the tooth and its formation (dentinogenesis) is a highly regulated process displaying several similarities with osteogenesis. In this study, gelatin, thermally denatured collagen, was used as a promising low-cost material to develop scaffolds for hard tissue engineering. We synthetized dentin-like scaffolds using gelatin biomineralized with magnesium-doped hydroxyapatite and blended it with alginate. With a controlled freeze-drying process and alginate cross-linking, it is possible to obtain scaffolds with microscopic aligned channels suitable for tissue engineering. 3D cell culture with mesenchymal stem cells showed the promising properties of the new scaffolds for tooth regeneration. In detail, the chemical–physical features of the scaffolds, mimicking those of natural tissue, facilitate the cell adhesion, and the porosity is suitable for long-term cell colonization and fine cell–material interactions.

Impact of splenic artery ligation after major hepatectomy on liver function, regeneration and viability

It was reported that prevention of acute portal overpressure in small-for-size livers by inflow modulation results in a better postoperative outcome. The aim is to investigate the impact of portal blood flow reduction by splenic artery ligation after major hepatectomy in a murine model. Forty-eight rats were subjected to an 85% hepatectomy or 85% hepatectomy and splenic artery ligation. Both groups were evaluated at 24, 48, 72 and 120 post-operative hours: liver function, regeneration and viability. All methods and experiments were carried out in accordance with Coimbra University guidelines. Splenic artery ligation produces viability increase after 24 h, induces a relative decrease in oxidative stress during the first 48 hours, allows antioxidant capacity increment after 24 h, which is reflected in a decrease of half-time normalized liver curve at 48 h and at 72 h and in an increase of mitotic index between 48 h and 72 h. Splenic artery ligation combined with 85% hepatectomy in a murine model, allows portal inflow modulation, promoting an increase in hepatocellular viability and regeneration, without impairing the function, probably by inducing a less marked elevation of oxidative stress at first 48 hours.

In vitro REGENERATION OF PIGEON PEA USING LEAF EXPLANTS

Pigeon pea ( Cajanus cajan (L.) Millsp.) is a drought tolerant pulse legume, mainly grown for grain in the semi-arid tropics, particularly in Africa. Pigeon pea production in countries like Kenya is faced with a number of challenges, particularly lack of high quality seeds. The objective of this study was to develop an in vitro regeneration system for pigeon pea varieties grown in Kenya, that is amenable to genetic transformation. In vitro regeneration of pigeon pea varieties, KAT 60/8 and ICEAP 00557, commonly grown in Kenya was achieved using leaf explants from in vitro grown seedlings, through callus initiation, followed by shoot and root induction. For callus initiation, MS media supplemented with 0.5-4 mg l-1 2, 4-D and TDZ separately were tested, and IBA at 0.1, 0.5 and 1 mg l-1 was tested for rooting of shoots. Embryogenic calli was obtained on MS containing 2, 4- D; whereas TDZ induced non-embryogenic callus alone or with shoots directly on explants. Indirect shoot regeneration frequency of 6.7 % was achieved using 1 mg l-1 2, 4-D-induced embryogenic callus obtained using KAT 60/8 explants. Whereas direct shoot regeneration frequencies of 20 and 16.7% were achieved using ICEAP 00557 and KAT 60/8 explants, using 0.5 mg l-1 and 2 mg l-1 TDZ, respectively. Optimum rooting was achieved using 0.5 mg l-1 IBA; and up to 92% rooted shoots were successfully established in soil after acclimatisation. Genotype and hormone concentrations had a significant (P<0.05) influence on callus, shoot and root induction. The protocol developed can be optimised for mass production and genetic transformation of KAT 60/8 variety.

Towards the port-city: thirty years of waterfront regeneration projects in Malaga.

A principios de la década de los 80' la ciudad de Málaga, con un centro histórico totalmente degradado, y un puerto, aún sin hacer frente a la demanda de contenedores y cruceros, deciden embaucarse en el desarrollo de un Plan Especial. Este plan permitiría por un lado que el puerto se modernizara y pudiera ser competitivo, liberando los muelles más próximos a la ciudad y adentrándose en el mar; y por otro lado que esos muelles liberados de actividad portuaria pudieran transformarse en terciario para la regeneración del centro histórico tal y como había ocurrido en Baltimore y otras tantas ciudades que habían adaptado ese modelo. Sin embargo, esto que en un principio parecía resolver los problemas de ambas realidades, dio lugar a más de 25 años de discusiones y propuestas distantes. Durante este largo periodo el Plan se quedó obsoleto. El tiempo de aprobación del Plan superó la previsión del mismo. Cuando llegaron a un acuerdo, tanto el puerto como la ciudad ya se habían desarrollado paralelamente, tanto en el tiempo como en el espacio, pero sin ninguna relación. Esto mismo se reflejaba en el Plan acordado que se limitaba a los muelles, sin relacionarse ni con la dársena ni con la ciudad. Sin embargo, a pesar de la discordancia, los ciudadanos han ido conquistando ambos terrenos, y aunque no existe ninguna continuidad física ni funcional, han sido ellos mismos los que han conseguido la integración del puerto-ciudad.

Biological significance of dead biomass retention trait in Mediterranean Basin species: an analysis between different successional niches and regeneration strategies as functional groups

Standing dead biomass retention is considered one of the most relevant fuel structural traits to affect plant flammability. However, very little is known about the biological significance of this trait and its distribution between different functional groups. Our aim was to analyse how the proportion of dead biomass produced in Mediterranean species is related to the successional niche of species (early-, mid- and late-successional stages) and the regeneration strategy of species (seeders and resprouters). We evaluated biomass distribution by size classes and standing dead biomass retention in nine dominant species from the Mediterranean Basin in different development stages (5, 9, 14 and 26 years since the last fire). The results revealed significant differences in the standing dead biomass retention of species that presented a distinct successional niche or regeneration strategy. These differences were restricted to the oldest ages studied (>9 years). Tree and small tree resprouters, typical in late-successional stages, presented slight variations with age and a less marked trend to retain dead biomass, while seeder shrubs and dwarf shrubs, characteristic of early-successional stages, showed high dead biomass loads. Our results suggest that the species that tend to retain more dead branches are colonising species that may promote fire in early-successional stages.

Development of a 1-D Catalyzed Diesel Particulate Filter Model for Simulation of the Performance and the Oxidation of Particulate Matter and Nitrogen Oxides Using Passive Oxidation and Active Regeneration Engine Experimental Data

Back-pressure on a diesel engine equipped with an aftertreatment system is a function of the pressure drop across the individual components of the aftertreatment system, typically, a diesel oxidation catalyst (DOC), catalyzed particulate filter (CPF) and selective catalytic reduction (SCR) catalyst. Pressure drop across the CPF is a function of the mass flow rate and the temperature of the exhaust flowing through it as well as the mass of particulate matter (PM) retained in the substrate wall and the cake layer that forms on the substrate wall. Therefore, in order to control the back-pressure on the engine at low levels and to minimize the fuel consumption, it is important to control the PM mass retained in the CPF. Chemical reactions involving the oxidation of PM under passive oxidation and active regeneration conditions can be utilized with computer numerical models in the engine control unit (ECU) to control the pressure drop across the CPF. Hence, understanding and predicting the filtration and oxidation of PM in the CPF and the effect of these processes on the pressure drop across the CPF are necessary for developing control strategies for the aftertreatment system to reduce back-pressure on the engine and in turn fuel consumption particularly from active regeneration. Numerical modeling of CPF's has been proven to reduce development time and the cost of aftertreatment systems used in production as well as to facilitate understanding of the internal processes occurring during different operating conditions that the particulate filter is subjected to. A numerical model of the CPF was developed in this research work which was calibrated to data from passive oxidation and active regeneration experiments in order to determine the kinetic parameters for oxidation of PM and nitrogen oxides along with the model filtration parameters. The research results include the comparison between the model and the experimental data for pressure drop, PM mass retained, filtration efficiencies, CPF outlet gas temperatures and species (NO2) concentrations out of the CPF. Comparisons of PM oxidation reaction rates obtained from the model calibration to the data from the experiments for ULSD, 10 and 20% biodiesel-blended fuels are presented.

AN EXPERIMENTAL INVESTIGATION INTO THE EFFECTS OF BIODIESEL BLENDS ON PARTICULATE MATTER OXIDATION IN A CATALYZED PARTICULATE FILTER DURING ACTIVE REGENERATION

Active regeneration experiments were carried out on a production 2007 Cummins 8.9L ISL engine and associated DOC and CPF aftertreatment system. The effects of SME biodiesel blends were investigated in this study in order to determine the PM oxidation kinetics associated with active regeneration, and to determine the effect of biodiesel on them. The experimental data from this study will also be used to calibrate the MTU-1D CPF model. Accurately predicting the PM mass retained in the CPF and the oxidation characteristics will provide the basis for computation in the ECU that will minimize the fuel penalty associated with active regeneration. An active regeneration test procedure was developed based on previous experimentation at MTU. During each experiment, the PM mass in the CPF is determined by weighing the filter at various phases. In addition, DOC and CPF pressure drop, particle size distribution, gaseous emissions, temperature, and PM concentration data are collected and recorded throughout each experiment. The experiments covered a range of CPF inlet temperatures using ULSD, B10, and B20 blends of biodiesel. The majority of the tests were performed at CPF PM loading of 2.2 g/L with in-cylinder dosing, although 4.1 g/L and a post-turbo dosing injector were also used. The PM oxidation characteristics at different test conditions were studied in order to determine the effects of biodiesel on PM oxidation during active regeneration. A PM reaction rate calculation method was developed to determine the global activation energy and the corresponding pre-exponential factor for all test fuels. The changing sum of the total flow resistance of the wall, cake, and channels was also determined as part of the data analysis process in order to check on the integrity of the data and to correct input data to be consistent with the expected trends of the resistance based on the engine conditions used in the test procedure. It was determined that increasing the percent biodiesel content in the test fuel tends to increase the PM reaction rate and the regeneration efficiency of fuel dosing, i.e., at a constant CPF inlet temperature, B20 test fuel resulted in the highest PM reaction rate and regeneration efficiency of fuel dosing. Increasing the CPF inlet temperature also increases PM reaction rate and regeneration efficiency of fuel dosing. Performing active regeneration with B20 as opposed to ULSD allows for a lower CPF temperature to be used to reach the same level of regeneration efficiency, or it allows for a shorter regeneration time at a constant CPF temperature, resulting in decreased fuel consumption for the engine during active regeneration in either scenario.

Regeneration in felling gaps after logging in Acre state, Western Amazon.

Regeneration of tree species in felling gaps were studied during the first two years following harvesting in a tropical forest in Acre state, Brazil. Felling gaps averaged 340 m2 in size, while canopy openings averaged 17%. Seedling mortality in adjacent undisturbed forest was 4.6% yr', and 59.6% yr·1 and 100% yr' in the crown and trunk zones respectively, two years after logging. Recruitment of new seedlings inthe undisturbed forest understorey averaged 462 plants ha' yr', two years after gap creation. Inthe crown zones of the gaps, recruitment of seedlings averaged 1350 ha' yr', and in the trunk zones 1392 ha' yr'. The entire seedling community in trunk zones after logging was composed of new recruits. lhere was a tendency for seedling growth rates to increase from the natural forest (0,21cm yr-1) to the crown zone (0.40cm yr'), Before gap creation, species richness and diversity and seedling density were quite similar. After gap creation a sharp decrease could be verified in the gap.zones, however the differences between gap and undisturbed forest decreased rapidly in the second year after gap creation. lhe regeneration of commercial species was not affected by gap creation apart from the increase in growth rates.

Efficient genetic transformation and regeneration system from hairy root of Origanum vulgare.

2016

Fast natural regeneration in abandoned pastures in southern Amazonia.

2016