Competing O-H insertion and  -elimination in rhodium carbenoid reactions; synthesis of 2-alkoxy-3-arylpropanoates

Rhodium(II) carboxylate catalyzed decompn. of diazo esters 3 (shown as I) and PhCH2C(CO2Et)N2 4 in the presence of alcs. or water results in formation of 2-alkoxy- or 2-hydroxy-3-arylpropanoates, resp., by O-H insertion in competition with cinnamates by elimination; the ratio of insertion to elimination is dramatically affected by the carboxylate ligand on rhodium. Use of methanol-d as the alc. confirms that the alkene does not arise by elimination from the initial alkoxyester product.

Functionalised ionic liquids: synthesis of ionic liquids with tethered basic groups and their use in Heck and Knoevenagel reactions

A simple and efficient synthesis of a novel series of ionic liquids bearing nucleophilic (Me2N) and non-nucleophilic base ((Pr2N)-Pr-i) functionalities is described. The non-nucleophilic base functionality resembles the structure of the Hunig's base (N, N-diisopropylethylamine), which has been used widely in organic synthesis. A qualitative measure of the basicity of these ionic liquids is presented by utilising their interaction with universal indicator. The basicity of these ionic liquids was found to be dependent on the amine tether and choice of linker between the two nitrogen centres. The relative base strength of these ionic liquids was also probed by using them as catalysts in the Heck and Knoevenagel reactions.

Synthesis and Reactions of Enantiopure Substituted Benzene cis-Hexahydro-1,2-diols

Enantiopure cis-dihydro-1,2-diol metabolites, obtained from toluene dioxygenase-catalysed cis-dihydroxylation of six monosubstituted benzene substrates, have been converted to their corresponding cis-hexahydro-12-diol derivatives by catalytic hydrogenation via their cis-tetrahydro-1,2-diol intermediates. Optimal reaction conditions for total catalytic hydrogenation of the cis-dihydro-1,2-diols have been established using six heterogeneous catalysts. The relative and absolute configurations of the resulting benzene cis-hexahydro-1,2-diol products have been unequivocally established by X-ray crystallography and NMR spectroscopy. Methods have been developed to obtain enantiopure cis-hexahydro-1,2-diol diastereoisomers, to desymmetrise a meso-cis-hexahydro-1,2-diol and to synthesise 2-substituted cyclohexanols. The potential of these enantiopure cyclohexanols as chiral reagents was briefly evaluated through their application in the synthesis of two enantiomerically enriched phosphine oxides from the corresponding racemic phosphine precursors.

Thermochemistry of Ionic Liquid-Catalyzed Reactions: Theoretical and Experimental Study of the Beckmann Rearrangement-Kinetic or Thermodynamic Control?

A thermodynamic analysis of the experimental conditions of the Beckmann rearrangement reaction of oximes into amides has been undertaken to examine whether the reaction is under thermodynamic or kinetic control. To answer this question, the thermodynamic properties of the typical Beckmann rearrangement reactions in the ideal gaseous state-cyclohexanone oxime to caprolactam and 2-butanone oxime to N-methylpropanarnide-were studied by using the quantum mechanical method. Gibbs energy and equilibrium constants of the Beckmann rearrangement have been assessed in the gaseous and the liquid phases. Results of the thermodynamic analysis have shown that Beckmann rearrange ments are kinetically controlled. Thus, a search for possible active ionic liquid based catalysts for the mild reaction conditions has been performed.

SpaciMS: spatial and temporal operando resolution of reactions within catalytic monoliths

Monolithic catalysts are widely used as structured catalysts, especially in the abatement of pollutants. Probing what happens inside these monoliths during operation is, therefore, vital for modelling and prediction of the catalyst behavior. SpaciMS is a spatially resolved capillary-inlet mass spectroscopy system allowing for the generation of spatially resolved maps of the reactions within monoliths. In this study SpaciMS results combined with 3D CFD modelling demonstrate that SpaciMS is a highly sensitive and minimally invasive technique that can provide reaction maps as well as catalytic temporal behavior. Herein we illustrate this by examining kinetic oscillations during a CO oxidation reaction over a Pt/Rh on alumina catalyst supported on a cordierite monolith. These oscillations were only observed within the monolith by SpaciMS between 30 and 90% CO conversion. Equivalent experiments performed in a plug-flow reactor using this catalyst in a crushed form over a similar range of reaction conditions did not display any oscillations demonstrating the importance of intra monolith analysis. This work demonstrates that the SpaciMS offers an accurate and comprehensive picture of structured catalysts under operation.

Peer Rating for Feedback in Group Projects

The National Student Survey (NSS) in the UK has since 2005 questioned final year
undergraduate students on a broad range of issues relating to their university experience.
Across disciplines and universities students have expressed least satisfaction in the areas of
assessment and feedback. In response to these results many educational practitioners have
reviewed and revised their procedures and the UK Higher Education Academy (HEA) has
produced guidelines of best practice to assist academics in improving these specific areas.
The Product Design and Development (PDD) degree at Queen’s University Belfast is
structured with an integrated curriculum with group Design Build Test (DBT) projects as the
core of each year of the undergraduate programme. Based on the CDIO syllabus and
standards the overall learning outcomes for the programme are defined and developed in a
staged manner, guided by Bloom’s taxonomy of learning domains.
Feedback in group DBT projects, especially in relation to the development of personal and
professional skills, represents a different challenge to that of individual assignment feedback.
A review of best practice was carried out to establish techniques which could be applied to
the particular context of the PDD degree without modification and also to identify areas
where a different approach would need to be applied.
A revised procedure was then developed which utilised the structure of the PDD degree to
provide a mechanism for enhanced feedback in group project work, while at the same time
increasing student development of self and peer evaluation skills. Key to this improvement
was the separation of peer ratings from assessment in the perception of the students and the
introduction of more frequent face to face feedback interviews.
This paper details the new procedures developed and additional issues which have been
raised and addressed, with reference to the published literature, during 3 years of operation.

Asymmetric Carbon-Carbon Bond Forming Reactions Catalysed by Metal(II) Bis(oxazoline) Complexes Immobilized using Supported Ionic Liquids

A series of bis(oxazoline) metal(II) complexes has been supported on silica and carbon supports by non-covalent immobilisation using an ionic liquid. The catalytic performance of these solids was compared for the enantioselective Diels-Alder reaction between N-acryloyloxazolidinone and cyclopentadiene and the Mukaiyama-aldol reaction between methyl pyruvate and 1-methoxy-1-trimethylsilyloxy-propene. In both reactions the enantioselectivity was strongly influenced by the choice of support displaying enantioselectivies (ee values) up to 40% higher than those conducted under homogeneous reaction conditions.

Adsorption and photocatalysed destruction of cationic and anionic dyes on mesoporous titania films: Reactions at the air-solid interface

Cationic dyes, such as methylene blue (MB), Thionine (TH) and Basic Fuschin (BF), but not anionic dyes, such as Acid Orange 7 (AO7), Acid Blue 9 (AB9) and Acid Fuschin (AF), are readily adsorbed onto mesoporous titania films at high pH (pH 11), i.e. well above the pzc of titania (pH 6.5), due to electrostatic forces of attraction and repulsion, respectively. The same anionic dyes, but not the cationic dyes, are readily adsorbed on the same titania films at low pH (pH 3), i.e. well below titania's pzc. MB appears to adsorb on mesoporous titania films at pH 11 as the trimer (lambda(max) = 570 nm) but, upon drying, although the trimer still dominates, there is an absorption peak at 665 nm, especially notable at low [MB], which may be due to the monomer, but more likely MB J-aggregates. In contrast, the absorption spectrum of AO7 adsorbed onto the mesoporous titania film at low pH is very similar to the dye monomer. For both MB and AO7 the kinetics of adsorption are first order and yield high rate constants (3.71 and 1.481 g(-1) min(-1)), indicative of a strong adsorption process. Indeed, both MB and AO7 stained films retained much of their colour when left overnight in dye-free pH 11 and 3 solutions, respectively, indicating the strong nature of the adsorption. The kinetics of the photocatalytic bleaching of the MB-titania films at high pH are complex and not well-described by the Julson-Ollis kinetic model [A.J. Julson, D.F. Ollis, Appl. Catal. B. 65 (2006) 315]. Instead, there appears to be an initial fast but not simple demethylation step, followed by a zero-order bleaching and further demethylation steps. In contrast, the kinetics of photocatalytic bleaching of the AO7-titania film give a good fit to the Julson-Ollis kinetic model, yielding values for the various fitting parameters not too dissimilar to those reported for AO7 adsorbed on P25 titania powder. (C) 2008 Elsevier B.V. All rights reserved.

Prospects for ultracold carbon via charge exchange reactions and laser cooled carbides

Strategies to produce an ultracold sample of carbon atoms are explored and assessed with the help of quantum chemistry. After a brief discussion of the experimental difficulties using conventional methods, two strategies are investigated. The first attempts to exploit charge exchange reactions between ultracold metal atoms and sympathetically cooled C+ ions. Ab initio calculations including electron correlation have been conducted on the molecular ions [LiC]+ and [BeC]+ to determine whether alkali or alkaline earth metals are a suitable buffer gas for the formation of C atoms but strong spontaneous radiative charge exchange ensure they are not ideal. The second technique involves the stimulated production of ultracold C atoms from a gas of laser cooled carbides. Calculations on LiC suggest that the alkali carbides are not suitable but the CH radical is a possible laser cooling candidate thanks to very favourable Frank-Condon factors. A scheme based on a four pulse STIRAP excitation pathway to a Feshbach resonance is outlined for the production of atomic fragments with near zero centre of mass velocity.

Transmetalation reactions with nitrogen-containing

The transmetalation reaction of the aryllithium compound [Li(NCN)](2) (NCN is the monoanionic