Hardware-based and Software-based Security in Digital Rights Management Solutions

The main requirements to DRM platforms implementing effective user experience and strong security measures to prevent unauthorized use of content are discussed. Comparison of hardware-based and software- based platforms is made showing the general inherent advantages of hardware DRM solutions. Analysis and evaluation of the main flaws of hardware platforms are conducted, pointing out the possibilities to overcome them. The overview of the existing concepts for practical realization of hardware DRM protection reveals their advantages and disadvantages and the increasing demand for creation of multi-core architecture, which could assure an effective DRM protection without decreasing the user’s freedom and importing risks for end system security.

Analysis and design of power management scheme for an on-board solar energy storage system

This paper investigates the power management issues in a mobile solar energy storage system. A multi-converter based energy storage system is proposed, in which solar power is the primary source while the grid or the diesel generator is selected as the secondary source. The existence of the secondary source facilitates the battery state of charge detection by providing a constant battery charging current. Converter modeling, multi-converter control system design, digital implementation and experimental verification are introduced and discussed in details. The prototype experiment indicates that the converter system can provide a constant charging current during solar converter maximum power tracking operation, especially during large solar power output variation, which proves the feasibility of the proposed design. © 2014 IEEE.

Self-organising zooms for decentralised redundancy management in visual sensor networks

When visual sensor networks are composed of cameras which can adjust the zoom factor of their own lens, one must determine the optimal zoom levels for the cameras, for a given task. This gives rise to an important trade-off between the overlap of the different cameras’ fields of view, providing redundancy, and image quality. In an object tracking task, having multiple cameras observe the same area allows for quicker recovery, when a camera fails. In contrast having narrow zooms allow for a higher pixel count on regions of interest, leading to increased tracking confidence. In this paper we propose an approach for the self-organisation of redundancy in a distributed visual sensor network, based on decentralised multi-objective online learning using only local information to approximate the global state. We explore the impact of different zoom levels on these trade-offs, when tasking omnidirectional cameras, having perfect 360-degree view, with keeping track of a varying number of moving objects. We further show how employing decentralised reinforcement learning enables zoom configurations to be achieved dynamically at runtime according to an operator’s preference for maximising either the proportion of objects tracked, confidence associated with tracking, or redundancy in expectation of camera failure. We show that explicitly taking account of the level of overlap, even based only on local knowledge, improves resilience when cameras fail. Our results illustrate the trade-off between maintaining high confidence and object coverage, and maintaining redundancy, in anticipation of future failure. Our approach provides a fully tunable decentralised method for the self-organisation of redundancy in a changing environment, according to an operator’s preferences.

Creative leadership:a multi-context conceptualization

Various streams of organizational research have examined the relationship between creativity and leadership, albeit using slightly different names such as “creative leadership”, “leading for creativity and innovation”, and “managing creatives”. In this article, we review this dispersed body of knowledge and synthesize it under a global construct of creative leadership, which refers to leading others toward the attainment of a creative outcome. Under this unifying construct, we classify three more narrow conceptualizations that we observe in the literature: facilitating employee creativity; directing the materialization of a leader's creative vision; and integrating heterogeneous creative contributions. After examining the contextual characteristics associated with the three conceptualizations, we suggest that they represent three distinct collaborative contexts of creative leadership. We discuss the theoretical implications of a multi-context framework of creative leadership, especially in terms of resolving three persisting problems in the extant literature: lack of definitional clarity, shortage of nuanced theories, and low contextual sensitivity.

Learning with a strategic management simulation game:a case study

The use of simulation games as a pedagogic method is well established though its effective use is context-driven. This study adds to the increasing growing body of empirical evidence of the effectiveness of simulation games but more importantly emphasises why by explaining the instructional design implemented reflecting best practices. This multi-method study finds evidence that student learning was enhanced through the use of simulation games, reflected in the two key themes; simulation games as a catalyst for learning and simulation games as a vehicle for learning. In so doing the research provides one of the few empirically based studies that support simulation games in enhancing learning and, more importantly, contextualizes the enhancement in terms of the instructional design of the curriculum. This research should prove valuable for those with an academic interest in the use of simulation games and management educators who use, or are considering its use. Further, the findings contribute to the academic debate concerning the effective implementation of simulation game-based training in business and management education.

Using the framework method for the analysis of qualitative data in multi-disciplinary health research

Background: The Framework Method is becoming an increasingly popular approach to the management and analysis of qualitative data in health research. However, there is confusion about its potential application and limitations. Discussion. The article discusses when it is appropriate to adopt the Framework Method and explains the procedure for using it in multi-disciplinary health research teams, or those that involve clinicians, patients and lay people. The stages of the method are illustrated using examples from a published study. Summary. Used effectively, with the leadership of an experienced qualitative researcher, the Framework Method is a systematic and flexible approach to analysing qualitative data and is appropriate for use in research teams even where not all members have previous experience of conducting qualitative research. © 2013 Gale et al.; licensee BioMed Central Ltd.

Balancing push and pull information management within the supply chain

The aim of this paper is to explore the management of information in an aerospace manufacturer's supply chain by analysing supply chain disruption risks. The social network perspective will be used to examine the flows of information in the supply chain. The examination of information flows will also be explored in terms of push and pull information management. The supply chain risk management (SCRM) strategy is to assess the management of information that allows companies to gather information which will allow them to mitigate that risk before any disruption to the supply chain occurs. There is a shortage of models in analysing the supply chain risk associated with information flows, possibly due to the omission of appropriate modelling techniques in this area (Tang and Nurmaya, 2011). This paper uses an exploratory case study consisting of a multi method qualitative approach using fifteen interviews and four focus groups.

Patients' and physicians' experiences of atrial fibrillation consultations and anticoagulation decision-making:a multi-perspective IPA design

OBJECTIVE: To explore patients' and physicians' experiences of atrial fibrillation consultations and oral anticoagulation decision-making. DESIGN: Multi-perspective interpretative phenomenological analyses. METHODS: Participants included small homogeneous subgroups: AF patients who accepted (n=4), refused (n=4), or discontinued (n=3) warfarin, and four physician subgroups (n=4 each group): consultant cardiologists, consultant general physicians, general practitioners and cardiology registrars. Semi-structured interviews were conducted. Transcripts were analysed using multi-perspective IPA analyses to attend to individuals within subgroups and making comparisons within and between groups. RESULTS: Three themes represented patients' experiences: Positioning within the physician-patient dyad, Health-life balance, and Drug myths and fear of stroke. Physicians' accounts generated three themes: Mechanised metaphors and probabilities, Navigating toward the 'right' decision, and Negotiating systemic factors. CONCLUSIONS: This multi-perspective IPA design facilitated an understanding of the diagnostic consultation and treatment decision-making which foregrounded patients' and physicians' experiences. We drew on Habermas' theory of communicative action to recommend broadening the content within consultations and shifting the focus to patients' life contexts. Interventions including specialist multidisciplinary teams, flexible management in primary care, and multifaceted interventions for information provision may enable the creation of an environment that supports genuine patient involvement and participatory decision-making.

Global trends in myopia management attitudes and strategies in clinical practice

PURPOSE: Myopia is a global public health issue; however, no information exists as to how potential myopia retardation strategies are being adopted globally. METHODS: A self-administrated, internet-based questionnaire was distributed in six languages, through professional bodies to eye care practitioners globally. The questions examined: awareness of increasing myopia prevalence, perceived efficacy and adoption of available strategies, and reasons for not adopting specific strategies. RESULTS: Of the 971 respondents, concern was higher (median 9/10) in Asia than in any other continent (7/10, p<0.001) and they considered themselves more active in implementing myopia control strategies (8/10) than Australasia and Europe (7/10), with North (4/10) and South America (5/10) being least proactive (p<0.001). Orthokeratology was perceived to be the most effective method of myopia control, followed by increased time outdoors and pharmaceutical approaches, with under-correction and single vision spectacles felt to be the least effective (p<0.05). Although significant intra-regional differences existed, overall most practitioners 67.5 (±37.8)% prescribed single vision spectacles or contact lenses as the primary mode of correction for myopic patients. The main justifications for their reluctance to prescribe alternatives to single vision refractive corrections were increased cost (35.6%), inadequate information (33.3%) and the unpredictability of outcomes (28.2%). CONCLUSIONS: Regardless of practitioners' awareness of the efficacy of myopia control techniques, the vast majority still prescribe single vision interventions to young myopes. In view of the increasing prevalence of myopia and existing evidence for interventions to slow myopia progression, clear guidelines for myopia management need to be established.

Applicability of non-modular assessment in construction management and allied undergraduate programmes:perspective of the academics involved

Undergraduate programmes on construction management and other closely related built environment disciplines are currently taught and assessed on a modular basis. This is the case in the UK and in many other countries globally. However, it can be argued that professionally oriented programmes like these are better assessed on a non-modular basis, in order to produce graduates who can apply knowledge on different subject contents in cohesion to solve complex practical scenarios in their work environments. The examples of medical programmes where students are assessed on a non-modular basis can be cited as areas where this is already being done. A preliminary study was undertaken to explore the applicability of non-modular assessment within construction management undergraduate education. A selected sample of university academics was interviewed to gather their perspectives on applicability of non-modular assessment. General acceptance was observed among the academics involved that integrating non-modular assessment is applicable and will be beneficial. All academics stated that at least some form of non-modular assessment as being currently used in their programmes. Examples where cross-modular knowledge is assessed included comprehensive/multi-disciplinary project modules and creating larger modules to amalgamate a number of related subject areas. As opposed to a complete shift from modular to non-modular, an approach where non-modular assessment is integrated and its use further expanded within the current system is therefore suggested. This is due to the potential benefits associated with this form of assessment to professionally aligned built environment programmes

Applications of data envelopment analysis in education

Non-parametric methods for efficiency evaluation were designed to analyse industries comprising multi-input multi-output producers and lacking data on market prices. Education is a typical example. In this chapter, we review applications of DEA in secondary and tertiary education, focusing on the opportunities that this offers for benchmarking at institutional level. At secondary level, we investigate also the disaggregation of efficiency measures into pupil-level and school-level effects. For higher education, while many analyses concern overall institutional efficiency, we examine also studies that take a more disaggregated approach, centred either around the performance of specific functional areas or that of individual employees.

Capabilities for advanced services:a multi-actor perspective

Servitization involves manufacturers developing service offerings to grow revenue and profit. Advanced services, in particular, can facilitate a more service-focused organization and impact customers' business processes significantly. However, approaches to servitization are often discussed solely from the manufacturer's perspective; overlooking the role of other network actors. Adopting a multi-actor perspective, this study investigates manufacturer, intermediary and customer perspectives to identify complementary and competing capabilities within a manufacturer's downstream network, required for advanced services. Interviews were conducted with 24 senior executives in 19 UK-based manufacturers, intermediaries and customers across multiple sectors. The study identified six key business activities, within which advanced services capabilities were grouped. The unique and critical capabilities for advanced services for each actor were identified as follows: manufacturers; the need to balance product and service innovation, developing customer-focused through-life service methodologies and having distinct, yet synergistic product and service cultures; intermediaries, the coordination and integration of third party products/services; customers, co-creating innovation and having processes supporting service outsourcing. The study is unique in highlighting the distinct roles of different actors in the provision of advanced services and shows that they can only be developed and delivered by the combination of complex interconnected capabilities found within a network.

Human resource management, innovation and performance

Human Resource Management, Innovation and Performance investigates the relationship between HRM, innovation and performance. Taking a multi-level perspective the book reflects critically on contentious themes such as high performance work systems, organizational design options, cross-boundary working, leadership styles and learning at work.

Human resource management, innovation and performance:looking across levels

The importance of innovation can hardly be exaggerated, given that landmark change has defined human progress in our technological age. The business pages of popular journals are replete with a dazzling array of inventions that have overturned existing ways of working and fundamentally changed human experience — from agricultural drones that offer farmers new ways to increase crop yield to genome editing that provides powerful insights into genetically baffling brain disorders. Innovation has become a topical theme within organisations, too, with no shortage of advice and suggestions often targeted at business leaders about how to craft an innovation strategy or increase the number and quality of ideas with a view to enriching organisational life. The quote at the start of this chapter bears testament to the sheer effort of moving away from familiar, habitual practices in the direction of less-certain, risky future terrain. Setting aside what has gone before to move in new directions requires determination, resilience and courage at a personal level. Often overlooked, though, are the multi-level dynamics that this entails.

A multi-organisational approach for disaster preparedness and response:the use of optimisation and GIS for facility location, stock pre-positioning, resource allocation and relief distribution

From 1992 to 2012 4.4 billion people were affected by disasters with almost 2 trillion USD in damages and 1.3 million people killed worldwide. The increasing threat of disasters stresses the need to provide solutions for the challenges faced by disaster managers, such as the logistical deployment of resources required to provide relief to victims. The location of emergency facilities, stock prepositioning, evacuation, inventory management, resource allocation, and relief distribution have been identified to directly impact the relief provided to victims during the disaster. Managing appropriately these factors is critical to reduce suffering. Disaster management commonly attracts several organisations working alongside each other and sharing resources to cope with the emergency. Coordinating these agencies is a complex task but there is little research considering multiple organisations, and none actually optimising the number of actors required to avoid shortages and convergence. The aim of the this research is to develop a system for disaster management based on a combination of optimisation techniques and geographical information systems (GIS) to aid multi-organisational decision-making. An integrated decision system was created comprising a cartographic model implemented in GIS to discard floodable facilities, combined with two models focused on optimising the decisions regarding location of emergency facilities, stock prepositioning, the allocation of resources and relief distribution, along with the number of actors required to perform these activities. Three in-depth case studies in Mexico were studied gathering information from different organisations. The cartographic model proved to reduce the risk to select unsuitable facilities. The preparedness and response models showed the capacity to optimise the decisions and the number of organisations required for logistical activities, pointing towards an excess of actors involved in all cases. The system as a whole demonstrated its capacity to provide integrated support for disaster preparedness and response, along with the existence of room for improvement for Mexican organisations in flood management.