Physical and Genetic Analysis of the CUP1 Tandem Array in the Yeast Saccharomyces cerevisiae

The genomes of many strains of baker’s yeast, Saccharomyces cerevisiae, contain multiple repeats of the copper-binding protein Cup1. Cup1 is a member of the metallothionein family, and is found in a tandem array on chromosome VIII. In this thesis, I describe studies that characterized these tandem arrays and their mechanism of formation across diverse strains of yeast. I show that CUP1 arrays are an illuminating model system for observing recombination in eukaryotes, and describe insights derived from these observations.

In our first study, we analyzed 101 natural isolates of S. cerevisiae in order to examine the diversity of CUP1-containing repeats across different strains. We identified five distinct classes of repeats that contain CUP1. We also showed that some strains have only a single copy of CUP1. By comparing the sequences of all the strains, we were able to elucidate the mechanism of formation of the CUP1 tandem arrays, which involved unequal non-homologous recombination events starting from a strain that had only a single CUP1 gene. Our observation of CUP1 repeat formation allows more general insights about the formation of tandem repeats from single-copy genes in eukaryotes, which is one of the most important mechanisms by which organisms evolve.

In our second study, we delved deeper into our mechanistic investigations by measuring the relative rates of inter-homolog and intra-/inter-sister chromatid recombination in CUP1 tandem arrays. We used a diploid strain that is heterozygous both for insertion of a selectable marker (URA3) inside the tandem array, and also for markers at either end of the array. The intra-/inter-sister chromatid recombination rate turned out to be more than ten-fold greater than the inter-homolog rate. Moreover, we found that loss of the proteins Rad51 and Rad52, which are required for most inter-homolog recombination, did not greatly reduce recombination in the CUP1 tandem repeats. Additionally, we investigated the effects of elevated copper levels on the rate of each type of recombination at the CUP1 locus. Both types of recombination are increased at high concentrations of copper (as is known to be the case for CUP1 transcription). Furthermore, the inter-homolog recombination rate at the CUP1 locus is higher than the average over the genome during mitosis, but is lower than the average during meiosis.

The research described in Chapter 2 is published in 2014.

Primary pulmonary myxoid sarcoma with EWSR1-CREB1 fusion: a new tumor entity.

We present clinicopathologic data on 10 pulmonary myxoid sarcomas, which are defined by distinctive histomorphologic features and characterized by a recurrent fusion gene, that appear to represent a distinct tumor entity at this site. The patients [7 female, 3 male; aged 27 to 67 y (mean, 45 y)] presented with local or systemic symptoms (n=5), symptoms from cerebral metastasis (1), or incidentally (2). Follow-up of 6 patients showed that 1 with brain metastasis died shortly after primary tumor resection, 1 developed a renal metastasis but is alive and well, and 4 are disease free after 1 to 15 years. All tumors involved pulmonary parenchyma, with a predominant endobronchial component in 8 and ranged from 1.5 to 4 cm. Microscopically, they were lobulated and composed of cords of polygonal, spindle, or stellate cells within myxoid stroma, morphologically reminiscent of extraskeletal myxoid chondrosarcoma. Four cases showed no or minimal atypia, 6 showed focal pleomorphism, and 5 had necrosis. Mitotic indices varied, with most tumors not exceeding 5/10 high-power fields. Tumors were immunoreactive for only vimentin and weakly focal for epithelial membrane antigen. Of 9 tumors, 7 were shown to harbor a specific EWSR1-CREB1 fusion by reverse transcription-polymerase chain reaction and direct sequencing, with 7 of 10 showing EWSR1 rearrangement by fluorescence in situ hybridization. This gene fusion has been described previously in 2 histologically and behaviorally different sarcomas: clear cell sarcoma-like tumors of the gastrointestinal tract and angiomatoid fibrous histiocytomas; however, this is a novel finding in tumors with the morphology we describe and that occur in the pulmonary region.

Le sommeil comme marqueur du déclin cognitif dans la maladie de Parkinson

La maladie de Parkinson (MP) est une maladie neurodégénérative qui se caractérise principalement par la présence de symptômes moteurs. Cependant, d’autres symptômes, dits non moteurs, sont fréquents dans la MP et assombrissent le pronostic; ceux ci incluent notamment les désordres du sommeil et les troubles cognitifs. De fait, sur une période de plus de 10 ans, jusqu’à 90 % des patients avec la MP développeraient une démence. L’identification de marqueurs de la démence dans la MP est donc primordiale pour permettre le diagnostic précoce et favoriser le développement d’approches thérapeutiques préventives. Plusieurs études ont mis en évidence la contribution du sommeil dans les processus de plasticité cérébrale, d’apprentissage et de consolidation mnésique, notamment l’importance des ondes lentes (OL) et des fuseaux de sommeil (FS). Très peu de travaux se sont intéressés aux liens entre les modifications de la microarchitecture du sommeil et le déclin cognitif dans la MP. L’objectif de cette thèse est de déterminer, sur le plan longitudinal, si certains marqueurs électroencéphalographiques (EEG) en sommeil peuvent prédire la progression vers la démence chez des patients atteints de la MP. La première étude a évalué les caractéristiques des OL et des FS durant le sommeil lent chez les patients avec la MP selon qu’ils ont développé ou non une démence (MP démence vs MP sans démence) lors du suivi longitudinal, ainsi que chez des sujets contrôles en santé. Comparativement aux patients MP sans démence et aux sujets contrôles, les patients MP démence présentaient au temps de base une diminution de la densité, de l’amplitude et de la fréquence des FS. La diminution de l’amplitude des FS dans les régions postérieures était associée à de moins bonnes performances aux tâches visuospatiales chez les patients MP démence. Bien que l’amplitude des OL soit diminuée chez les deux groupes de patients avec la MP, celle ci n’était pas associée au statut cognitif lors du suivi. La deuxième étude a évalué les marqueurs spectraux du développement de la démence dans la MP à l’aide de l’analyse quantifiée de l’EEG en sommeil lent, en sommeil paradoxal et à l’éveil. Les patients MP démence présentaient une diminution de la puissance spectrale sigma durant le sommeil lent dans les régions pariétales comparativement aux patients MP sans démence et aux contrôles. Durant le sommeil paradoxal, l’augmentation de la puissance spectrale en delta et en thêta, de même qu’un plus grand ratio de ralentissement de l’EEG, caractérisé par un rapport plus élevé des basses fréquences sur les hautes fréquences, était associée au développement de la démence chez les patients avec la MP. D’ailleurs, dans la cohorte de patients, un plus grand ralentissement de l’EEG en sommeil paradoxal dans les régions temporo occipitales était associé à des performances cognitives moindres aux épreuves visuospatiales. Enfin, durant l’éveil, les patients MP démence présentaient au temps de base une augmentation de la puissance spectrale delta, un plus grand ratio de ralentissement de l’EEG ainsi qu’une diminution de la fréquence dominante occipitale alpha comparativement aux patients MP sans démence et aux contrôles. Cette thèse suggère que des anomalies EEG spécifiques durant le sommeil et l’éveil peuvent identifier les patients avec la MP qui vont développer une démence quelques années plus tard. L’activité des FS, ainsi que le ralentissement de l’EEG en sommeil paradoxal et à l’éveil, pourraient donc servir de marqueurs potentiels du développement de la démence dans la MP.

The Performance Characteristics of a Surface-Modified Cutting Tool

In the past, many papers have been presented which show that the coating of cutting tools often yields decreased wear rates and reduced coefficients of friction. Although different theories are proposed, covering areas such as hardness theory, diffusion barrier theory, thermal barrier theory, and reduced friction theory, most have not dealt with the question of how and why the coating of tool substrates with hard materials such as Titanium Nitride (TiN), Titanium Carbide (TiC) and Aluminium Oxide (Al203) transforms the performance and life of cutting tools. This project discusses the complex interrelationship that encompasses the thermal barrier function and the relatively low sliding friction coefficient of TiN on an undulating tool surface, and presents the result of an investigation into the cutting characteristics and performance of EDMed surface-modified carbide cutting tool inserts. The tool inserts were coated with TiN by the physical vapour deposition (PVD) method. PVD coating is also known as Ion-plating which is the general term of the coating method in which the film is created by attracting ionized metal vapour in this the metal was Titanium and ionized gas onto negatively biased substrate surface. Coating by PVD was chosen because it is done at a temperature of not more than 5000C whereas chemical Vapour Deposition CVD process is done at very high temperature of about 8500C and in two stages of heating up the substrates. The high temperatures involved in CVD affects the strength of the (tool) substrates. In this study, comparative cutting tests using TiN-coated control specimens with no EDM surface structures and TiN-coated EDMed tools with a crater-like surface topography were carried out on mild steel grade EN-3. Various cutting speeds were investigated, up to an increase of 40% of the tool manufacturer’s recommended speed. Fifteen minutes of cutting were carried out for each insert at the speeds investigated. Conventional tool inserts normally have a tool life of approximately 15 minutes of cutting. After every five cuts (passes) microscopic pictures of the tool wear profiles were taken, in order to monitor the progressive wear on the rake face and on the flank of the insert. The power load was monitored for each cut taken using an on-board meter on the CNC machine to establish the amount of power needed for each stage of operation. The spindle drive for the machine is an 11 KW/hr motor. Results obtained confirmed the advantages of cutting at all speeds investigated using EDMed coated inserts, in terms of reduced tool wear and low power loads. Moreover, the surface finish on the workpiece was consistently better for the EDMed inserts. The thesis discusses the relevance of the finite element method in the analysis of metal cutting processes, so that metal machinists can design, manufacture and deliver goods (tools) to the market quickly and on time without going through the hassle of trial and error approach for new products. Improvements in manufacturing technologies require better knowledge of modelling metal cutting processes. Technically the use of computational models has a great value in reducing or even eliminating the number of experiments traditionally used for tool design, process selection, machinability evaluation, and chip breakage investigations. In this work, much interest in theoretical and experimental investigations of metal machining were given special attention. Finite element analysis (FEA) was given priority in this study to predict tool wear and coating deformations during machining. Particular attention was devoted to the complicated mechanisms usually associated with metal cutting, such as interfacial friction; heat generated due to friction and severe strain in the cutting region, and high strain rates. It is therefore concluded that Roughened contact surface comprising of peaks and valleys coated with hard materials (TiN) provide wear-resisting properties as the coatings get entrapped in the valleys and help reduce friction at chip-tool interface. The contributions to knowledge: a. Relates to a wear-resisting surface structure for application in contact surfaces and structures in metal cutting and forming tools with ability to give wear-resisting surface profile. b. Provide technique for designing tool with roughened surface comprising of peaks and valleys covered in conformal coating with a material such as TiN, TiC etc which is wear-resisting structure with surface roughness profile compose of valleys which entrap residual coating material during wear thereby enabling the entrapped coating material to give improved wear resistance. c. Provide knowledge for increased tool life through wear resistance, hardness and chemical stability at high temperatures because of reduced friction at the tool-chip and work-tool interfaces due to tool coating, which leads to reduced heat generation at the cutting zones. d. Establishes that Undulating surface topographies on cutting tips tend to hold coating materials longer in the valleys, thus giving enhanced protection to the tool and the tool can cut faster by 40% and last 60% longer than conventional tools on the markets today.

Osteossarcoma, quimioterapia HDMTX e reflexos laboratoriais

O osteossarcoma ou sarcoma osteogénico (OS) é o tumor maligno primário mais comum de origem óssea que ocorre em crianças e adultos jovens. Este tumor surge a partir de células mesenquimais e é histologicamente caracterizado pela presença de células fusiformes e formação aberrante de osteóide. A incidência desta neoplasia apresenta uma distribuição bimodal, com um primeiro pico na adolescência e um segundo pico a ocorrer entre a 6ª e a 7ª década de vida. A maioria dos pacientes apresenta doença localizada à data do diagnóstico, e destes, aproximadamente 15 a 20% apresentam metástases detectáveis, em especial, pulmonares. A abordagem terapêutica ao OS engloba quimioterapia pré-operatória (neoadjuvante) seguida de ressecção cirúrgica do tumor primário e de todas as metástases visíveis e de quimioterapia pós-operatória (adjuvante). Historicamente, muitos agentes foram testados e usados no tratamento do OS, mas desde os anos 90 até à actualidade, o esquema de tratamento baseia-se na utilização de três agentes: Metotrexato (MTX), Doxorrubicina (A) e Ciclofosfamida (P), podendo ou não ser incluído um 4º agente, a Ifosfamida (I) ou o Ectopósido (E). Para surtir efeito, o MTX é administrado em alta dose, habitualmente de 12g/m2, podendo ir até 20g/m2, apresentando vários efeitos adversos. Como tal, outros agentes quimioterápicos têm sido testados, assim como outros tipos de tratamento e alvos, com o intuito de melhorar a performance e a sobrevida sem recorrência. A identificação de biomarcadores que permitam o diagnóstico, prognóstico e monitorização da terapia tem sido outra das principais linhas de investigação relacionadas com o OS. O objetivo deste trabalho centra-se na revisão da importância do tratamento neoadjuvante enquanto fator prognóstico do OS, e da monitorização laboratorial na utilização do MTX por forma a evitar efeitos secundários.

Osteossarcoma, quimioterapia HDMTX e reflexos laboratoriais

O osteossarcoma ou sarcoma osteogénico (OS) é o tumor maligno primário mais comum de origem óssea que ocorre em crianças e adultos jovens. Este tumor surge a partir de células mesenquimais e é histologicamente caracterizado pela presença de células fusiformes e formação aberrante de osteóide. A incidência desta neoplasia apresenta uma distribuição bimodal, com um primeiro pico na adolescência e um segundo pico a ocorrer entre a 6ª e a 7ª década de vida. A maioria dos pacientes apresenta doença localizada à data do diagnóstico, e destes, aproximadamente 15 a 20% apresentam metástases detectáveis, em especial, pulmonares. A abordagem terapêutica ao OS engloba quimioterapia pré-operatória (neoadjuvante) seguida de ressecção cirúrgica do tumor primário e de todas as metástases visíveis e de quimioterapia pós-operatória (adjuvante). Historicamente, muitos agentes foram testados e usados no tratamento do OS, mas desde os anos 90 até à actualidade, o esquema de tratamento baseia-se na utilização de três agentes: Metotrexato (MTX), Doxorrubicina (A) e Ciclofosfamida (P), podendo ou não ser incluído um 4º agente, a Ifosfamida (I) ou o Ectopósido (E). Para surtir efeito, o MTX é administrado em alta dose, habitualmente de 12g/m2, podendo ir até 20g/m2, apresentando vários efeitos adversos. Como tal, outros agentes quimioterápicos têm sido testados, assim como outros tipos de tratamento e alvos, com o intuito de melhorar a performance e a sobrevida sem recorrência. A identificação de biomarcadores que permitam o diagnóstico, prognóstico e monitorização da terapia tem sido outra das principais linhas de investigação relacionadas com o OS. O objetivo deste trabalho centra-se na revisão da importância do tratamento neoadjuvante enquanto fator prognóstico do OS, e da monitorização laboratorial na utilização do MTX por forma a evitar efeitos secundários.

Regulation of mitotic BubR1 phosphorylation by the BubR1 pseudokinase domain

BubR1 est une protéine importante dans le point de contrôle de la mitose pour la stabilisation des interactions entre kinétochores et microtubules (KT-MT). Ces fonctions protègent de la ségrégation anormale des chromosomes et de l’instabilité du génome. BubR1 possède des sites de phosphorylation mitotique hautement conservés dans le domaine régulant l’attachement des kinétochores (KARD), où S676 et S670 sont phosphorylées respectivement par la kinase polo-like 1 (Plk1) et par la kinase cycline-dépendante 1 (Cdk1). Ces sites de phosphorylation sont essentiels pour le recrutement de la phosphatase PP2A-B56, qui stabilise les interactions KT-MT. Nos résultats montrent que la délétion entière ou des mutations qui déstabilisent le domaine pseudokinase de BubR1, causent la perte de phosphorylation des résidus S676 et S670 en mitose. Notre hypothèse est que le domaine pseudokinase de BubR1 peut jouer un rôle essentiel dans la régulation de la phosphorylation du KARD et donc dans la stabilisation des interactions KT-MT.

Applications for nanomaterials in critical technologies

This thesis is devoted to the development, synthesis, properties, and applications of nano materials for critical technologies, including three areas: (1) Microbial contamination of drinking water is a serious problem of global significance. About 51% of the waterborne disease outbreaks in the United States can be attributed to contaminated ground water. Development of metal oxide nanoparticles, as viricidal materials is of technological and fundamental scientific importance. Nanoparticles with high surface areas and ultra small particle sizes have dramatically enhanced efficiency and capacity of virus inactivation, which cannot be achieved by their bulk counterparts. A series of metal oxide nanoparticles, such as iron oxide nanoparticles, zinc oxide nanoparticles and iron oxide-silver nanoparticles, coated on fiber substrates was developed in this research for evaluation of their viricidal activity. We also carried out XRD, TEM, SEM, XPS, surface area measurements, and zeta potential of these nanoparticles. MS2 virus inactivation experiments showed that these metal oxide nanoparticle coated fibers were extremely powerful viricidal materials. Results from this research suggest that zinc oxide nanoparticles with diameter of 3.5 nm, showing an isoelectric point (IEP) at 9.0, were well dispersed on fiberglass. These fibers offer an increase in capacity by orders of magnitude over all other materials. Compared to iron oxide nanoparticles, zinc oxide nanoparticles didn’t show an improvement in inactivation kinetics but inactivation capacities did increase by two orders of magnitude to 99.99%. Furthermore, zinc oxide nanoparticles have higher affinity to viruses than the iron oxide nanoparticles in presence of competing ions. The advantages of zinc oxide depend on high surface charge density, small nanoparticle sizes and capabilities of generating reactive oxygen species. The research at its present stage of development appears to offer the best avenue to remove viruses from water. Without additional chemicals and energy input, this system can be implemented by both points of use (POU) and large-scale use water treatment technology, which will have a significant impact on the water purification industry. (2) A new family of aliphatic polyester lubricants has been developed for use in micro-electromechanical systems (MEMS), specifically for hard disk drives that operate at high spindle speeds (>15000rpm). Our program was initiated to address current problems with spin-off of the perfluoroether (PFPE) lubricants. The new polyester lubricant appears to alleviate spin-off problems and at the same time improves the chemical and thermal stability. This new system provides a low cost alternative to PFPE along with improved adhesion to the substrates. In addition, it displays a much lower viscosity, which may be of importance to stiction related problems. The synthetic route is readily scalable in case additional interest emerges in other areas including small motors. (3) The demand for increased signal transmission speed and device density for the next generation of multilevel integrated circuits has placed stringent demands on materials performance. Currently, integration of the ultra low-k materials in dual Damascene processing requires chemical mechanical polishing (CMP) to planarize the copper. Unfortunately, none of the commercially proposed dielectric candidates display the desired mechanical and thermal properties for successful CMP. A new polydiacetylene thermosetting polymer (DEB-TEB), which displays a low dielectric constant (low-k) of 2.7, was recently developed. This novel material appears to offer the only avenue for designing an ultra low k dielectric (1.85k), which can still display the desired modulus (7.7Gpa) and hardness (2.0Gpa) sufficient to withstand the process of CMP. We focused on further characterization of the thermal properties of spin-on poly (DEB-TEB) ultra-thin film. These include the coefficient of thermal expansion (CTE), biaxial thermal stress, and thermal conductivity. Thus the CTE is 2.0*10-5K-1 in the perpendicular direction and 8.0*10-6 K-1 in the planar direction. The low CTE provides a better match to the Si substrate which minimizes interfacial stress and greatly enhances the reliability of the microprocessors. Initial experiments with oxygen plasma etching suggest a high probability of success for achieving vertical profiles.

Early programming of the oocyte epigenome temporally controls late prophase I transcription and chromatin remodelling

Oocytes are arrested for long periods of time in the prophase of the first meiotic division (prophase I). As chromosome condensation poses significant constraints to gene expression, the mechanisms regulating transcriptional activity in the prophase I-arrested oocyte are still not entirely understood. We hypothesized that gene expression during the prophase I arrest is primarily epigenetically regulated. Here we comprehensively define the Drosophila female germ line epigenome throughout oogenesis and show that the oocyte has a unique, dynamic and remarkably diversified epigenome characterized by the presence of both euchromatic and heterochromatic marks. We observed that the perturbation of the oocyte's epigenome in early oogenesis, through depletion of the dKDM5 histone demethylase, results in the temporal deregulation of meiotic transcription and affects female fertility. Taken together, our results indicate that the early programming of the oocyte epigenome primes meiotic chromatin for subsequent functions in late prophase I.

Exploration d’un modèle d’étude simplifié de la spermiogenèse par l’utilisation de la levure à fission

Résumé: Les cellules germinales mâles remodèlent leur chromatine pour compacter leur noyau afin de protéger leur matériel génétique et assurer un transit optimal vers le gamète femelle. Il a été démontré que tous les spermatides de plusieurs mammifères, incluant l’homme et la souris, présentaient ce mécanisme de remodelage de la chromatine. Celui-ci est caractérisé par une augmentation transitoire de cassures d’ADN dont une quantité importante sont bicaténaires. Ce remodelage chromatinien a été étudié et semble être conservé chez plusieurs espèces, allant de l’algue à l’humain. Dans le contexte de la recherche fondamentale sur le phénomène de la spermiogenèse, il devient parfois très difficile d’investiguer certains aspects importants en vertu de l’impossibilité de réaliser des manipulations génétiques simples. Il est donc impératif de développer un nouveau modèle d’étude plus permissif afin de palier à ces difficultés encourues. Comme le processus de maturation des spores chez la levure à fission présente de grandes similitudes avec la spermiogenèse des mammifères, l’utilisation d’un modèle d’étude basé sur la sporulation de la levure à fission Schizosaccharomyces pombe a été proposée comme modèle comparatif de la spermatogenèse murine. À la suite de la synchronisation de la méiose de la souche S. pombe pat1-114, des analyses d’électrophorèse en champ pulsé (PFGE) et de qTUNEL ont permis de déterminer la présence de cassures bicaténaires transitoires de l’ADN lors de la maturation post-méiotique des ascospores nouvellement formés (t>7h). Des analyses par immunobuvardages dirigés contre le variant d’histones H2AS129p suggère la présence d’un remodelage chromatinien postméiotique dix heures suivant l’induction de la méiose, corroborant le modèle murin. Enfin, des analyses protéomiques couplées à l’analyse par spectrométrie de masse ont permis de proposer l’endonucléase Pnu1 comme candidat potentiellement responsable des cassures bicaténaires transitoires dans l’ADN des ascospores en maturation. En somme, bien que le processus de maturation des spores soit encore bien méconnu, quelques parallèles peuvent être tracés entre la maturation des ascospores de la levure à fission et la spermiogenèse des eucaryotes supérieurs. En identifiant un modèle simple du remodelage chromatinien au niveau de la spermiogenèse animale, on s’assurerait ainsi d’un outil beaucoup plus malléable et versatile pour l’étude fondamentale des événements survenant lors de la spermiogenèse humaine.

Modeling the distribution of crossovers and interference with mice DNA data

Chiasma and crossover are two related biological processes of great importance in the understanding genetic variation. The study of these processes is straightforward in organisms where all products of meiosis are recovered and can be observed. This is not the case in mammals. Our understanding of these processes depends on our ability to model them. In this study I describe the biological processes that underline chiasma and crossover as well as the two main inference problems associated with these processes: i) in mammals we only recover one of the four products of meiosis and, ii) in general, we do not observe where the crossovers actually happen, but we find an interval containing type-2 censored information. NPML estimate was proposed and used in this work and used to compare chromosome length and chromosome expansion through the crosses.

Le sommeil comme marqueur du déclin cognitif dans la maladie de Parkinson

La maladie de Parkinson (MP) est une maladie neurodégénérative qui se caractérise principalement par la présence de symptômes moteurs. Cependant, d’autres symptômes, dits non moteurs, sont fréquents dans la MP et assombrissent le pronostic; ceux ci incluent notamment les désordres du sommeil et les troubles cognitifs. De fait, sur une période de plus de 10 ans, jusqu’à 90 % des patients avec la MP développeraient une démence. L’identification de marqueurs de la démence dans la MP est donc primordiale pour permettre le diagnostic précoce et favoriser le développement d’approches thérapeutiques préventives. Plusieurs études ont mis en évidence la contribution du sommeil dans les processus de plasticité cérébrale, d’apprentissage et de consolidation mnésique, notamment l’importance des ondes lentes (OL) et des fuseaux de sommeil (FS). Très peu de travaux se sont intéressés aux liens entre les modifications de la microarchitecture du sommeil et le déclin cognitif dans la MP. L’objectif de cette thèse est de déterminer, sur le plan longitudinal, si certains marqueurs électroencéphalographiques (EEG) en sommeil peuvent prédire la progression vers la démence chez des patients atteints de la MP. La première étude a évalué les caractéristiques des OL et des FS durant le sommeil lent chez les patients avec la MP selon qu’ils ont développé ou non une démence (MP démence vs MP sans démence) lors du suivi longitudinal, ainsi que chez des sujets contrôles en santé. Comparativement aux patients MP sans démence et aux sujets contrôles, les patients MP démence présentaient au temps de base une diminution de la densité, de l’amplitude et de la fréquence des FS. La diminution de l’amplitude des FS dans les régions postérieures était associée à de moins bonnes performances aux tâches visuospatiales chez les patients MP démence. Bien que l’amplitude des OL soit diminuée chez les deux groupes de patients avec la MP, celle ci n’était pas associée au statut cognitif lors du suivi. La deuxième étude a évalué les marqueurs spectraux du développement de la démence dans la MP à l’aide de l’analyse quantifiée de l’EEG en sommeil lent, en sommeil paradoxal et à l’éveil. Les patients MP démence présentaient une diminution de la puissance spectrale sigma durant le sommeil lent dans les régions pariétales comparativement aux patients MP sans démence et aux contrôles. Durant le sommeil paradoxal, l’augmentation de la puissance spectrale en delta et en thêta, de même qu’un plus grand ratio de ralentissement de l’EEG, caractérisé par un rapport plus élevé des basses fréquences sur les hautes fréquences, était associée au développement de la démence chez les patients avec la MP. D’ailleurs, dans la cohorte de patients, un plus grand ralentissement de l’EEG en sommeil paradoxal dans les régions temporo occipitales était associé à des performances cognitives moindres aux épreuves visuospatiales. Enfin, durant l’éveil, les patients MP démence présentaient au temps de base une augmentation de la puissance spectrale delta, un plus grand ratio de ralentissement de l’EEG ainsi qu’une diminution de la fréquence dominante occipitale alpha comparativement aux patients MP sans démence et aux contrôles. Cette thèse suggère que des anomalies EEG spécifiques durant le sommeil et l’éveil peuvent identifier les patients avec la MP qui vont développer une démence quelques années plus tard. L’activité des FS, ainsi que le ralentissement de l’EEG en sommeil paradoxal et à l’éveil, pourraient donc servir de marqueurs potentiels du développement de la démence dans la MP.

Desarrollo y dinámica de los folículos ováricos desde la etapa fetal hasta la prepuberal en bovinos

Resumen Esta revisión compila el desarrollo y la dinámica folicular con una perspectiva histológica y de biología del desarrollo, desde la etapa fetal hasta prepuberal en bovinos (Bos taurus). Se trata de un proceso complejo y coordinado, con cambios fisiológicos y morfológicos que intervienen en la diferenciación y el desarrollo ovocitario. Los folículos son la unidad fundamental del ovario y comandan los procesos reproductivos y las fases del ciclo estral, con dos funciones fundamentales, la producción de hormonas y de ovocitos. La formación de folículos primordiales se conoce como el proceso de ensamblaje folicular, en el cual “nidos” de ovocitos completan su proliferación mitótica y comienzan la meiosis, mientras que muchos de estos folículos se vuelven apoptóticos, favoreciendo la desorganización de los nidos. El proceso de formación de folículos primordiales comienza durante el desarrollo fetal en bovinos, aproximadamente a los 80 días de gestación. Existe gran variación individual en el número de folículos, existiendo un pool de reserva ya al nacimiento. De unos 2.700.000 folículos primordiales constituidos al final del ensamblaje folicular, 90% degeneran, quedando al nacimiento aproximadamente 135.000 células germinales, las cuales declinan rápidamente hasta la pubertad y luego de ella. Los folículos primordiales se desarrollan a folículos primario, secundario, antral y preovularorio (en hembras adultas). Estas transiciones implican cambios citológicos, histológicos y morfológicos que son descritos. En terneras, igual que en animales adultos, ocurren ondas de crecimiento folicular, que aparecen a la segunda semana de vida. En la pubertad se observan importantes cambios endócrinos y ováricos y es influida por múltiples factores. El desarrollo folicular está íntimamente vinculado al futuro desempeño reproductivo de las hembras, por lo cual su conocimiento es fundamental para un adecuado manejo reproductivo de la hembra bovina y para ampliar las investigaciones vinculadas a esta disciplina

Chatter avoidance in the milling of thin floors with bull-nose end mills: Model and stability diagrams

The milling of thin parts is a high added value operation where the machinist has to face the chatter problem. The study of the stability of these operations is a complex task due to the changing modal parameters as the part loses mass during the machining and the complex shape of the tools that are used. The present work proposes a methodology for chatter avoidance in the milling of flexible thin floors with a bull-nose end mill. First, a stability model for the milling of compliant systems in the tool axis direction with bull-nose end mills is presented. The contribution is the averaging method used to be able to use a linear model to predict the stability of the operation. Then, the procedure for the calculation of stability diagrams for the milling of thin floors is presented. The method is based on the estimation of the modal parameters of the part and the corresponding stability lobes during the machining. As in thin floor milling the depth of cut is already defined by the floor thickness previous to milling, the use of stability diagrams that relate the tool position along the tool-path with the spindle speed is proposed. Hence, the sequence of spindle speeds that the tool must have during the milling can be selected. Finally, this methodology has been validated by means of experimental tests.