Mathematical analysis of activation thresholds in enzyme-catalyzed positive feedbacks: application to the feedbacks of blood coagulation.

A hierarchy of enzyme-catalyzed positive feedback loops is examined by mathematical and numerical analysis. Four systems are described, from the simplest, in which an enzyme catalyzes its own formation from an inactive precursor, to the most complex, in which two sequential feedback loops act in a cascade. In the latter we also examine the function of a long-range feedback, in which the final enzyme produced in the second loop activates the initial step in the first loop. When the enzymes generated are subject to inhibition or inactivation, all four systems exhibit threshold properties akin to excitable systems like neuron firing. For those that are amenable to mathematical analysis, expressions are derived that relate the excitation threshold to the kinetics of enzyme generation and inhibition and the initial conditions. For the most complex system, it was expedient to employ numerical simulation to demonstrate threshold behavior, and in this case long-range feedback was seen to have two distinct effects. At sufficiently high catalytic rates, this feedback is capable of exciting an otherwise subthreshold system. At lower catalytic rates, where the long-range feedback does not significantly affect the threshold, it nonetheless has a major effect in potentiating the response above the threshold. In particular, oscillatory behavior observed in simulations of sequential feedback loops is abolished when a long-range feedback is present.

On the well-posedness of a mathematical model for lithium-ion batteries.

We discuss the well-posedness of a mathematical model that is used in the literature for the simulation of lithium-ion batteries. First, a mathematical model based on a macrohomogeneous approach is presented, following previous work. Then it is shown, from a physical and a mathematical point of view, that a boundary condition widely used in the literature is not correct. Although the errors could be just sign typos (which can be explained as carelessness in the use of d/dx versus d/dn, with n the outward unit vector) and authors using this model probably use the correct boundary condition when they solve it in order to do simulations, readers should be aware of the right choice. Therefore, the deduction of the correct boundary condition is done here, and a mathematical study of the well-posedness of the corresponding problem is presented.

Mathematical modeling of drying process of unripe banana slices

Unripe banana flour (UBF) production employs bananas not submitted to maturation process, is an interesting alternative to minimize the fruit loss reduction related to inappropriate handling or fast ripening. The UBF is considered as a functional ingredient improving glycemic and plasma insulin levels in blood, have also shown efficacy on the control of satiety, insulin resistance. The aim of this work was to study the drying process of unripe banana slabs (Musa cavendishii, Nanicão) developing a transient drying model through mathematical modeling with simultaneous moisture and heat transfer. The raw material characterization was performed and afterwards the drying process was conducted at 40 ºC, 50 ºC e 60 ºC, the product temperature was recorded using thermocouples, the air velocity inside the chamber was 4 m·s-1. With the experimental data was possible to validate the diffusion model based on the Fick\'s second law and Fourier. For this purpose, the sorption isotherms were measured and fitted to the GAB model estimating the equilibrium moisture content (Xe), 1.76 [g H2O/100g d.b.] at 60 ºC and 10 % of relative humidity (RH), the thermophysical properties (k, Cp, ?) were also measured to be used in the model. Five cases were contemplated: i) Constant thermophysical properties; ii) Variable properties; iii) Mass (hm), heat transfer (h) coefficient and effective diffusivity (De) estimation 134 W·m-2·K-1, 4.91x10-5 m-2·s-1 and 3.278?10-10 m·s-2 at 60 ºC, respectively; iv) Variable De, it presented a third order polynomial behavior as function of moisture content; v) The shrinkage had an effect on the mathematical model, especially in the 3 first hours of process, the thickness experienced a contraction of about (30.34 ± 1.29) % out of the initial thickness, finding two decreasing drying rate periods (DDR I and DDR II), 3.28x10-10 m·s-2 and 1.77x10-10 m·s-2, respectively. COMSOL Multiphysics simulations were possible to perform through the heat and mass transfer coefficient estimated by the mathematical modeling.

Mathematical approach for predicting non-negative tristimulus values using the CAT02 chromatic adaptation transform

It has been reported that for certain colour samples, the chromatic adaptation transform CAT02 imbedded in the CIECAM02 colour appearance model predicts corresponding colours with negative tristimulus values (TSVs), which can cause problems in certain applications. To overcome this problem, a mathematical approach is proposed for modifying CAT02. This approach combines a non-negativity constraint for the TSVs of corresponding colours with the minimization of the colour differences between those values for the corresponding colours obtained by visual observations and the TSVs of the corresponding colours predicted by the model, which is a constrained non-linear optimization problem. By solving the non-linear optimization problem, a new matrix is found. The performance of the CAT02 transform with various matrices including the original CAT02 matrix, and the new matrix are tested using visual datasets and the optimum colours. Test results show that the CAT02 with the new matrix predicted corresponding colours without negative TSVs for all optimum colours and the colour matching functions of the two CIE standard observers under the test illuminants considered. However, the accuracy with the new matrix for predicting the visual data is approximately 1 CIELAB colour difference unit worse compared with the original CAT02. This indicates that accuracy has to be sacrificed to achieve the non-negativity constraint for the TSVs of the corresponding colours.

Different moments in the participatory stage of the secondary students’ abstraction of mathematical conceptions

This study provides support to the characteristics of participatory and anticipatory stages in secondary school pupils’ abstraction of mathematical conceptions. We carried out clinical task-based interviews with 71 secondary-school pupils to obtain evidence of the different constructed mathematical conceptions (Participatory Stage) and how they were used (Anticipatory Stage). We distinguish two moments in the Participatory Stage based on the coordination of information from particular cases by activity-effect reflection which, in some cases, lead to a change of focus enabling secondary-school pupils to achieve a reorganization of their knowledge. We argue that (a) the capacity of perceiving regularities in sets of particular cases is a characteristic of activity-effect reflection in the abstraction of mathematical conceptions in secondary school, and (b) the coordination of information by pupils provides opportunities for changing the attention-focus from the particular results to the structure of properties.

Primary school teacher’s noticing of students’ mathematical thinking in problem solving

Professional noticing of students’ mathematical thinking in problem solving involves the identification of noteworthy mathematical ideas of students’ mathematical thinking and its interpretation to make decisions in the teaching of mathematics. The goal of this study is to begin to characterize pre-service primary school teachers’ noticing of students’ mathematical thinking when students solve tasks that involve proportional and non-proportional reasoning. From the analysis of how pre-service primary school teachers notice students’ mathematical thinking, we have identified an initial framework with four levels of development. This framework indicates a possible trajectory in the development of primary teachers’ professional noticing.

Mathematical programming model for heat exchanger design through optimization of partial objectives

Mathematical programming can be used for the optimal design of shell-and-tube heat exchangers (STHEs). This paper proposes a mixed integer non-linear programming (MINLP) model for the design of STHEs, following rigorously the standards of the Tubular Exchanger Manufacturers Association (TEMA). Bell–Delaware Method is used for the shell-side calculations. This approach produces a large and non-convex model that cannot be solved to global optimality with the current state of the art solvers. Notwithstanding, it is proposed to perform a sequential optimization approach of partial objective targets through the division of the problem into sets of related equations that are easier to solve. For each one of these problems a heuristic objective function is selected based on the physical behavior of the problem. The global optimal solution of the original problem cannot be ensured even in the case in which each of the sub-problems is solved to global optimality, but at least a very good solution is always guaranteed. Three cases extracted from the literature were studied. The results showed that in all cases the values obtained using the proposed MINLP model containing multiple objective functions improved the values presented in the literature.

Mathematical modelling of the lower urinary tract

The lower urinary tract is one of the most complex biological systems of the human body as it involved hydrodynamic properties of urine and muscle. Moreover, its complexity is increased to be managed by voluntary and involuntary neural systems. In this paper, a mathematical model of the lower urinary tract it is proposed as a preliminary study to better understand its functioning. Furthermore, another goal of that mathematical model proposal is to provide a basis for developing artificial control systems. Lower urinary tract is comprised of two interacting systems: the mechanical system and the neural regulator. The latter has the function of controlling the mechanical system to perform the voiding process. The results of the tests reproduce experimental data with high degree of accuracy. Also, these results indicate that simulations not only with healthy patients but also of patients with dysfunctions with neurological etiology present urodynamic curves very similar to those obtained in clinical studies.

Deterministic mathematical morphology for CAD/CAM

Purpose – The purpose of this paper is to present a new geometric model based on the mathematical morphology paradigm, specialized to provide determinism to the classic morphological operations. The determinism is needed to model dynamic processes that require an order of application, as is the case for designing and manufacturing objects in CAD/CAM environments. Design/methodology/approach – The basic trajectory-based operation is the basis of the proposed morphological specialization. This operation allows the definition of morphological operators that obtain sequentially ordered sets of points from the boundary of the target objects, inexistent determinism in the classical morphological paradigm. From this basic operation, the complete set of morphological operators is redefined, incorporating the concept of boundary and determinism: trajectory-based erosion and dilation, and other morphological filtering operations. Findings – This new morphological framework allows the definition of complex three-dimensional objects, providing arithmetical support to generating machining trajectories, one of the most complex problems currently occurring in CAD/CAM. Originality/value – The model proposes the integration of the processes of design and manufacture, so that it avoids the problems of accuracy and integrity that present other classic geometric models that divide these processes in two phases. Furthermore, the morphological operative is based on points sets, so the geometric data structures and the operations are intrinsically simple and efficient. Another important value that no excessive computational resources are needed, because only the points in the boundary are processed.

Walking Through Cantor's Paradise and Escher's Garden: Epistemological Reflections on the Mathematical Infinite (II)

Infinity is not an easy concept. A number of difficulties that people cope with when dealing with problems related to infinity include its abstract nature, understanding infinity as an ongoing, never ending process, understanding infinity as a set of an infinite number of elements and appreciating well-known paradoxes. Infinity can be understood in several ways with often incompatible meanings, and can involve value judgments or assumptions that are neither explicit nor desired. To usher in its definition, we distinguish several aspects, teleological, artistic (Escher); some definitive, some potential, and others actual. This article also deals with some still unresolved aspects of the concept of infinity.

Mathematical documents, undated

This folder contains three mathematical documents.

Student mathematical proofs by Edward Stephen (?) Wigglesworth, 1788

Sheet with two handwritten mathematical proofs signed "Wigglesworth, 1788," likely referring Harvard student Edward Stephen Wigglesworth. The first proof, titled "Problem 1st," examines a prompt beginning, "Given the distance between the Centers of the Sun and Planet, and their quantities of matter; to find a place where a body will be attracted to neither of them." The second proof, titled "Problem 2d," begins "A & B having returned from a journey, had riden [sic] so far that if the square of the number of miles..." and asks "how many miles did each of them travel?"

Student mathematical textbook of James Freeman, 1774

Manuscript volume containing portions of text copied from Nicholas Saunderson’s Elements of algebra, Nicholas Hammond’s The elements of algebra, and John Ward’s The young mathematician’s guide. The volume is divided into two main parts: the first is titled Concerning the parts of Arithmetick (p. 1-98) and the second, The elements of Algebra, extracted from Hammond, Ward & Saunderson (p. 99-259).

Student mathematical notebook of Thomas Noyes, 1793

This sewn volume contains Noyes’ mathematical exercises in geometry; trigonometry; surveying; measurement of heights and distances; plain, oblique, parallel, middle latitude, and mercator sailing; and dialing. Many of the exercises are illustrated by carefully hand-drawn diagrams, including a mariners’ compass and moon dials.

Student mathematical notebook of Ebenezer Hill, 1785

This mathematical notebook of Ebenezer Hill was kept in 1795 while he was a student at Harvard College. The volume contains rules, definitions, problems, drawings, and tables on arithmetic, geometry, trigonometry, surveying, calculating distances, and dialing. Some of the exercises are illustrated by hand-drawn diagrams, including some of buildings and trees.