Target charging effects on proton acceleration during high-intensity short-pulse laser-solid interactions

We report results from experiments performed at the Rutherford Appleton Laboratory using the VULCAN laser facility (I>5x10(19) W cm(-2)). Single wire targets were used, and on some shots additional objects were placed near the target. These were positioned so that they were not irradiated by the laser. Proton emission from single wire targets was observed as radially symmetric structures (

Weibel-induced filamentation during an ultrafast, laser-driven plasma expansion

The development of current instabilities behind the front of a cylindrically expanding plasma has been investigated experimentally via proton probing techniques. A multitude of tubelike filamentary structures is observed to form behind the front of a plasma created by irradiating solid-density wire targets with a high-intensity (I~1019??W/cm2), picosecond-duration laser pulse. These filaments exhibit a remarkable degree of stability, persisting for several tens of picoseconds, and appear to be magnetized over a filament length corresponding to several filament radii. Particle-in-cell simulations indicate that their formation can be attributed to a Weibel instability driven by a thermal anisotropy of the electron population. We suggest that these results may have implications in astrophysical scenarios, particularly concerning the problem of the generation of strong, spatially extended and sustained magnetic fields in astrophysical jets.

Multiple self-aligned iron nanowires by a dual selective chemical vapor deposition process

We have demonstrated a self-aligned process to fabricate organized iron nanowires on a planarized surface with wire dimensions down to 50 nm. Polishing was used to expose an alternating silicon silicon dioxide edge and a dual selective metal deposition process produced the nanowires. The initial selective deposition produced a tungsten layer on the exposed polysilicon regions. The discovery that selective chemical vapor deposition of iron from Fe(CO)(5) precursor on dielectric surfaces over tungsten surfaces is the key factor that enables the self-alignment of the iron nanowires. Dimensions of the wires are determined by the thickness of the thermal oxide. (c) 2007 The Electrochemical Society.

Large‐scale wind deployment, social acceptance

The public is typically in agreement with the renewable energy targets established in many national states and generally supports the idea of increased reliance on wind energy. Nevertheless, many specific wind power projects face significant local opposition. A key question for the wind energy sector is, therefore, how to better engage local people to foster support for specific projects. IEA Wind Task 28 on Social Acceptance of Wind Energy Projects aims to facilitate wind energy development by reviewing current practices, emerging ideas, and exchanging successful practices among the participating countries. It also aims to disseminate the insights of leading research to a nontechnical audience, including project developers, local planning officials, and the general public. The interdisciplinary approach adopted by Task 28 enables an in-depth understanding of the nature of opposition to wind projects and a critical assessment of emerging strategies for social acceptance. Task 28 has analyzed a range of key issues related to social acceptance of wind energy, including the impacts on landscapes and ecosystems, on standard of living and well-being, the implementation of energy policy and spatial planning, the distribution of costs and benefits, and procedural justice. It is clear that although wind energy has many benefits; however, specific projects do impact local communities. As such the concerns of the affected people have to be taken seriously. Moreover, as opposition is rarely without foundation, it is in the interests of developers and advocates to engage local people and to improve projects for the benefit of all.

Thermal conductivities of ionic liquids over the temperature range from 293 K to 353 K

The thermal conductivities of 11 ionic liquids were determined, over the temperature range from 293 K to 353 K, at atmospheric pressure, using an apparatus based on the transient hot-wire method. For each of the ionic liquids studied, the thermal conductivities were found to be between (0.1 and 0.2) W.m(-1).K-1, with a slight decrease observed on increasing temperature. The uncertainty is estimated to be less than +/- 0.002 W.m(-1).K-1. In all cases, a linear equation was found to give a good fit to the data. The effects of water content and chloride content on the thermal conductivities of some of the ionic liquids were investigated. In each case, the thermal conductivities of the water + ionic liquid and chloride + ionic liquid binary mixtures were found to be less than the weighted average of the pure component thermal conductivities. This effect was adequately modeled using the Jamieson correlation. Chloride contamination at typical postsynthesis levels was found to have no significant effect on the thermal conductivities of the ionic liquid studied.

Fit to Burst

A single drama for BBC Radio 3 The Wire: Andy has hit a mid-life crisis. His career is a mess, his relationship is falling apart and despite, or perhaps because of this, he seems intent on eating himself into an early grave. The Voice in his head has warned him, clearly, and a nightmarish tour of his inner organs has left him in no doubt that he is headed for, at best, a coronary arrest; at worst, something that he can't bear to think about it.

And yet he persists. Drowning in despair he grasps at crumbs of comfort, ingesting enough food to support a small country and doubling his waist and his weight in just one month, terrifying his wife and his work colleagues and rendering the average doorway inadequate for his desperate attempts at escape.

Fatigue behavior of laser-welded NiTi wires in small-strain cyclic bending

NiTi wires and their weldments are commonly used in micro-electro-mechanical systems (MEMS), and in such applications, cyclic loading are commonly encountered. In this paper, the bending-rotation fatigue (BRF) test was used to study the bending fatigue behavior of NiTi wire laser weldment in the small-strain regime. The fracture mechanism, which includes crack initiation, crack growth and propagation of the weldment in the BRF test, was investigated with the aid of SEM fractography and discussed in terms of the microstructure. It was found that crack initiation was primarily surface-condition dependent. The cracks were found to initiate at the surface defects at the weld zone (WZ) surface, and the crack propagation was assisted by the gas inclusions in the WZ. The weldment was finally fractured in a ductile manner. The fatigue life was found to decrease with increasing surface strain and also with increasing bending frequency (controlled by the rotational speed in the BRF test). In comparison, the fatigue life of the unwelded NiTi wires was higher than their welded counterparts at all strain levels and bending frequencies. The decrease in fatigue resistance of the weldment could be attributed to the surface and microstructural defects introduced during laser welding.

Multibody modelling of gabion beams for impact applications

Gabions are stone-filled wire containers which are frequently used as retaining walls. However, due to their high mass, relatively low cost and visual appeal, a row of single gabion blocks, joined at the ends, has the potential to be used as a roadside impact absorption device where traditional steel or concrete devices may not be suitable. To evaluate such application, the shear and bending deformation of gabions under vehicle impact need to be investigated. In this paper, the shear response of a single gabion block is analytically modelled and a gabion beam multibody model is developed using a discretisation method to capture the deformability of the gabion structure. The material properties of the gabion beam are adopted from experimental values available in the literature and the modelling is statically validated over a three-point bending test and a distributed loading test. The results show that the discretised multibody modelling can be effectively used to describe the static deformation behaviour of gabion blocks.

The impact of global routing on the performance of NoCs in FPGAs

With the over-provisioned routing resource on FPGA, the topology choice for NoC implementation on FPGA is more flexible than on ASIC. However, it is well understood that the global wire routing impacts the performance of NoC on FPGA because the topology is routed by using fixed routing fabric. An important question that arises is: will the benefit of diameter reduction by using a highly connective topology outweigh the impact of global routing? To answer this question, we investigate FPGA based packet switched NoC implementations with different sizes and topologies, and quantitatively measure the impact of global routing to each of these networks. The result shows that with sufficient routing resources on modern FPGA, the global routing is not on the critical path of the system, and thus is not a dominating factor for the performance of practical multi-hop NoC system. © 2011 IEEE.

Slip distribution model along the anchorage length of prestressing strands

An analytical model to predict strand slips within both transmission and anchorage lengths in pretensioned prestressed concrete members is presented. This model has been derived from an experimental research work by analysing the bond behavior and determining the transmission and anchorage lengths of seven-wire prestressing steel strands in different concrete mixes. A testing technique based on measuring the prestressing strand force in specimens with different embedment lengths has been used. The testing technique allows measurement of free end slip as well as indirect determination of the strand slip at different cross sections of a member without interfering with bond phenomena. The experimental results and the proposed model for strand slip distribution have been compared with theoretical predictions according to different equations in the literature and with experimental results obtained by other researchers. © 2013 Elsevier Ltd.

A device to investigate the axial strain dependence of the critical current density in superconductors

We have developed an instrument to study the behavior of the critical current density (J(c)) in superconducting wires and tapes as a function of field (mu(0)H), temperature (T), and axial applied strain (epsilon(a)). The apparatus is an improvement of similar devices that have been successfully used in our institute for over a decade. It encompasses specific advantages such as a simple sample layout, a well defined and homogeneous strain application, the possibility of investigating large compressive strains and the option of simple temperature variation, while improving the main drawback in our previous systems by increasing the investigated sample length by approximately a factor of 10. The increase in length is achieved via a design change from a straight beam section to an initially curved beam, placed perpendicular to the applied field axis in the limited diameter of a high field magnet bore. This article describes in detail the mechanical design of the device and its calibrations. Additionally initial J(c)(epsilon(a)) data, measured at liquid helium temperature, are presented for a bronze processed and for a powder-in-tube Nb3Sn superconducting wire. Comparisons are made with earlier characterizations, indicating consistent behavior of the instrument. The improved voltage resolution, resulting from the increased sample length, enables J(c) determinations at an electric field criterion E-c=10 muV/m, which is substantially lower than a criterion of E-c=100 muV/m which was possible in our previous systems. (C) 2004 American Institute of Physics.

Difference equation approach to two-thermocouple sensor characterization in constant velocity flow environments

Thermocouples are one of the most popular devices for temperature measurement due to their robustness, ease of manufacture and installation, and low cost. However, when used in certain harsh environments, for example, in combustion systems and engine exhausts, large wire diameters are required, and consequently the measurement bandwidth is reduced. This article discusses a software compensation technique to address the loss of high frequency fluctuations based on measurements from two thermocouples. In particular, a difference equation (DE) approach is proposed and compared with existing methods both in simulation and on experimental test rig data with constant flow velocity. It is found that the DE algorithm, combined with the use of generalized total least squares for parameter identification, provides better performance in terms of time constant estimation without any a priori assumption on the time constant ratios of the thermocouples.

Current-induced forces: a simple derivation

We revisit the problem of forces on atoms under current in nanoscale conductors. We derive and discuss the five principal kinds of force under steady-state conditions from a simple standpoint that—with the help of background literature—should be accessible to physics undergraduates. The discussion aims at combining methodology with an emphasis on the underlying physics through examples. We discuss and compare two forces present only under current—the non-conservative electron wind force and a Lorentz-like velocity-dependent force. It is shown that in metallic nanowires both display significant features at the wire surface, making it a candidate for the nucleation of current-driven structural transformations and failure. Finally we discuss the problem of force noise and the limitations of Ehrenfest dynamics

State detection of bond wires in IGBT modules using eddy current pulsed thermography

Insulated gate bipolar transistor (IGBT) modules are important safety critical components in electrical power systems. Bond wire lift-off, a plastic deformation between wire bond and adjacent layers of a device caused by repeated power/thermal cycles, is the most common failure mechanism in IGBT modules. For the early detection and characterization of such failures, it is important to constantly detect or monitor the health state of IGBT modules, and the state of bond wires in particular. This paper introduces eddy current pulsed thermography (ECPT), a nondestructive evaluation technique, for the state detection and characterization of bond wire lift-off in IGBT modules. After the introduction of the experimental ECPT system, numerical simulation work is reported. The presented simulations are based on the 3-D electromagnetic-thermal coupling finite-element method and analyze transient temperature distribution within the bond wires. This paper illustrates the thermal patterns of bond wires using inductive heating with different wire statuses (lifted-off or well bonded) under two excitation conditions: nonuniform and uniform magnetic field excitations. Experimental results show that uniform excitation of healthy bonding wires, using a Helmholtz coil, provides the same eddy currents on each, while different eddy currents are seen on faulty wires. Both experimental and numerical results show that ECPT can be used for the detection and characterization of bond wires in power semiconductors through the analysis of the transient heating patterns of the wires. The main impact of this paper is that it is the first time electromagnetic induction thermography, so-called ECPT, has been employed on power/electronic devices. Because of its capability of contactless inspection of multiple wires in a single pass, and as such it opens a wide field of investigation in power/electronic devices for failure detection, performance characterization, and health monitoring. 

Evaluating environmental enrichment options for commercial broiler chickens

Implications Provision of environmental enrichment in line with that required by welfare-based quality assurance schemesdoes not always appear to lead to clear improvements in broiler chicken welfare. This research perhaps serves to highlightthe deficit in information regarding the ‘real world’ implications of enrichment with perches, string and straw bales.

Introduction Earlier work showed that provision of natural light and straw bales improved leg health in commercial broilerchickens (Bailie et al., 2013). This research aimed to determine if additional welfare benefits were shown in windowedhouses by increasing straw bale provision (Study 1), or by providing perches and string in addition to straw bales (Study 2).

Material and methods Commercial windowed houses in Northern Ireland containing ~23,000 broiler chickens (placed inhouses as hatched) were used in this research which took place in 2011. In Study 1 two houses on a single farm wereassigned to one of two treatments: (1) 30 straw bales per house (1 bale/44m2), or (2) 45 straw bales per house (1bale/29m2). Bales of wheat straw, each measuring 80cm x 40cm x 40cm were provided from day 10 of the rearing cycle,as in Bailie et al. (2013). Treatments were replicated over 6 production cycles (using 276,000 Ross 308 and Cobb birds),and were swapped between houses in each replicate. In Study 2, four houses on a single farm were assigned to 1 of 4treatments in a 2 x 2 factorial design. Treatments involved 2 levels of access to perches (present (24/house), or absent), and2 levels of access to string (present (24/house), or absent), and both types of enrichment were provided from the start of thecycle. Each perch consisted of a horizontal, wooden beam (300 cm x 5 cm x 5cm) with a rounded upper edge resting on 2supports (15 cm high). In the string treatment, 6 pieces of white nylon string (60 cm x 10 mm) were tied at their mid-pointto the wire above each of 4 feeder lines. Thirty straw bales were also provided per house from day 10. This study wasreplicated over 4 production cycles using 368,000 Ross 308 birds. In both studies behaviour was observed between 0900and 1800 hours in weeks 3-5 of the cycle. In Study 1, 8 focal birds were selected in each house each week, and generalactivity, exploratory and social behaviours recorded directly for 10 minutes. In Study 2, 10 minute video recordings weremade of 6 different areas (that did not contain enrichment) of each house each week. The percentage of birds engaged inlocomotion or standing was determined through scan sampling these recordings at 120 second intervals. Four perches andfour pieces of string were filmed for 25 mins in each house that contained these enrichments on one day per week. The totalnumber of times the perch or string was used was recorded, along with the duration of each bout. In both studies, gaitscores (0 (perfect) to 5 (unable to walk)) and latency to lie (measured in seconds from when a bird had been encouraged tostand) were recorded in 25 birds in each house each week. Farm and abattoir records were also used in both studies todetermine the number of birds culled for leg and other problems, mortality levels, slaughter weights, and levels of pododermatitis and hock burn. Data were analysed using SPSS (version 20.0) and treatment and age effects on behaviouralparameters were determined in normally distributed data using ANOVA (‘Straw bale density*week’, or‘string*perches*week’ as appropriate), and in non-normally distributed data using Kuskall-Wallace tests (P<0.05 forsignificance) . Treatment (but not age) effects on performance and health data were determined using the same testsdepending on normality of data.

Results Average slaughter weight, and levels of mortality, culling, hock burn and pododermatitis were not affected bytreatment in either study (P<0.05). In Study 1 straw bale (SB) density had no significant effect on the frequency orduration of behaviours including standing, walking, ground pecking, dust bathing, pecking at bales or aggression, or onaverage gait score (P>0.05). However, the average latency to lie was greater when fewer SB were provided (30SB 23.38s,45SB 18.62s, P<0.01). In Study 2 there was an interaction between perches (Pe) and age in lying behaviour, with higherpercentages of birds observed lying in the Pe treatment during weeks 4 and 5 (week 3 +Pe 77.0 -Pe 80.9, week 4 +Pe 79.5 -Pe 75.2, week 5 +Pe 78.4 -Pe 76.2, P<0.02). There was also a significant interaction between string (S) and age inlocomotory behaviour, with higher percentages of birds observed in locomotion in the string treatment during week 3 butnot weeks 4 and 5 (week 3 +S 4.9 -S 3.9, week 4 +S 3.3 -S 3.7, week 5 +S 2.6 -S 2.8, P<0.04). There was also aninteraction between S and age in average gait scores, with lower gait scores in the string treatment in weeks 3 and 5 (week3: +S 0.7, -S 0.9, week 4: +S 1.5, -S 1.4, week 5: +S 1.9, -S 2.0, P<0.05). On average per 25 min observation there were15.1 (±13.6) bouts of perching and 19.2 (±14.08) bouts of string pecking, lasting 117.4 (±92.7) and 4.2 (±2.0) s for perchesand string, respectively.

Conclusion Increasing straw bale levels from 1 bale/44m2 to 1 bale/29m2 floor space does not appear to lead to significantimprovements in the welfare of broilers in windowed houses. The frequent use of perches and string suggests that thesestimuli have the potential to improve welfare. Provision of string also appeared to positively influence walking ability.However, this effect was numerically small, was only shown in certain weeks and was not reflected in the latency to lie.Further research on optimum design and level of provision of enrichment items for broiler chickens is warranted. Thisshould include measures of overall levels of activity (both in the vicinity of, and away from, enrichment items).