Deep incision in an Aptian carbonate succession indicates major sea-level fall in the Cretaceous

Long-term relative sea-level cycles (0 5 to 6 Myr) have yet to be fully understood for the Cretaceous. During the Aptian, in the northern Maestrat Basin (Eastern Iberian Peninsula), fault-controlled subsidence created depositional space, but eustasy governed changes in depositional trends. Relative sea-level history was reconstructed by sequence stratigraphic analysis. Two forced regressive stages of relative sea-level were recognized within three depositional sequences. The first stage is late Early Aptian age (intra Dufrenoyia furcata Zone) and is characterized by foreshore to upper shoreface sedimentary wedges, which occur detached from a highstand carbonate platform, and were deposited above basin marls. The amplitude of relative sea-level drop was in the order of tens of metres, with a duration of <1 Myr. The second stage of relative sea-level fall occurred within the Late Aptian and is recorded by an incised valley that, when restored to its pre-contractional attitude, was >2 km wide and cut 115 m down into the underlying Aptian succession. With the subsequent transgression, the incision was back-filled with peritidal to shallow subtidal deposits. The changes in depositional trends, lithofacies evolution and geometric relation of the stratigraphic units characterized are similar to those observed in coeval rocks within the Maestrat Basin, as well as in other correlative basins elsewhere. The pace and magnitude of the two relative sea-level drops identified fall within the glacio-eustatic domain. In the Maestrat Basin, terrestrial palynological studies provide evidence that the late Early and Late Aptian climate was cooler than the earliest part of the Early Aptian and the Albian Stage, which were characterized by warmer environmental conditions. The outcrops documented here are significant because they preserve the results of Aptian long-term sea-level trends that are often only recognizable on larger scales (i.e. seismic) such as for the Arabian Plate.

Servei de rutes basat en Open Source Routing Machine

Aquesta memòria descriu la preparació, l'execució i els resultats obtinguts d'implementar un sistema calculador de rutes. El projecte Open Source Routing Machine és un motor calculador de rutes d'alt rendiment que utilitza les dades de OpenStreetMaps per calcular el camí més curt entre dos punts. En aquest projecte final no únicament es volen utilitzar les dades OpenStreetMap sinó que també es pretenen utilitzar dades pròpies en format shapefile i poder visualitzar-los en un visor web. Aquest visor permet a l'usuari, de forma senzilla, sol•licitar rutes al servidor OSRM creat, obtenint la ruta desitjada en molt pocs milisegons

All-Optical Unicast/Multicast Routing in WDM Networks

Optical transport networks (OTN) must be prepared in terms of better resource utilization, for accommodating unicast and multicast traffic together. Light-trees have been proposed for supporting multicast connections in OTN. Nevertheless when traffic grooming is applied in light-trees, resources can be underutilized as traffic can be routed to undesirable destinations in order to avoid optical-electrical-optical (OEO) conversions. In this paper, a novel architecture named S/G light- tree for supporting unicast/multicast connections is proposed. The architecture allows traffic dropping and aggregation in different wavelengths without performing OEO conversions. A heuristic that routes traffic demands using less wavelengths by taking advantage of the proposed architecture is designed as well. Simulation results show that the architecture can minimize the number of used wavelengths and OEO conversions when compared to light-trees

Molecular Interactions of Prodiginines with the BH3 Domain of Anti-Apoptotic Bcl-2 Family Members.

Prodigiosin and obatoclax, members of the prodiginines family, are small molecules with anti-cancer properties that are currently under preclinical and clinical trials. The molecular target(s) of these agents, however, is an open question. Combining experimental and computational techniques we find that prodigiosin binds to the BH3 domain in some BCL-2 protein families, which play an important role in the apoptotic programmed cell death. In particular, our results indicate a large affinity of prodigiosin for MCL-1, an anti-apoptotic member of the BCL-2 family. In melanoma cells, we demonstrate that prodigiosin activates the mitochondrial apoptotic pathway by disrupting MCL-1/BAK complexes. Computer simulations with the PELE software allow the description of the induced fit process, obtaining a detailed atomic view of the molecular interactions. These results provide new data to understand the mechanism of action of these molecules, and assist in the development of more specific inhibitors of anti-apoptotic BCL-2 proteins.

Photomultiplier nonlinear response in time-domain laser-induced luminescence spectroscopy

A new procedure to find the limiting range of the photomultiplier linear response of a low-cost, digital oscilloscope-based time-resolved laser-induced luminescence spectrometer (TRLS), is presented. A systematic investigation on the instrument response function with different signal input terminations, and the relationship between the luminescence intensity reaching the photomultiplier and the measured decay time are described. These investigations establish that setting the maximum intensity of the luminescence signal below 0.3V guarantees, for signal input terminations equal or higher than 99.7 ohm, a linear photomultiplier response.

Utilization of a Time Domain Simulator in the Technical and Economic Analysis of a Wind Turbine Electric Drive Train

The amount of installed wind power has been growing exponentially during the past ten years. As wind turbines have become a significant source of electrical energy, the interactions between the turbines and the electric power network need to be studied more thoroughly than before. Especially, the behavior of the turbines in fault situations is of prime importance; simply disconnecting all wind turbines from the network during a voltage drop is no longer acceptable, since this would contribute to a total network collapse. These requirements have been a contributor to the increased role of simulations in the study and design of the electric drive train of a wind turbine. When planning a wind power investment, the selection of the site and the turbine are crucial for the economic feasibility of the installation. Economic feasibility, on the other hand, is the factor that determines whether or not investment in wind power will continue, contributing to green electricity production and reduction of emissions. In the selection of the installation site and the turbine (siting and site matching), the properties of the electric drive train of the planned turbine have so far been generally not been taken into account. Additionally, although the loss minimization of some of the individual components of the drive train has been studied, the drive train as a whole has received less attention. Furthermore, as a wind turbine will typically operate at a power level lower than the nominal most of the time, efficiency analysis in the nominal operating point is not sufficient. This doctoral dissertation attempts to combine the two aforementioned areas of interest by studying the applicability of time domain simulations in the analysis of the economicfeasibility of a wind turbine. The utilization of a general-purpose time domain simulator, otherwise applied to the study of network interactions and control systems, in the economic analysis of the wind energy conversion system is studied. The main benefits of the simulation-based method over traditional methods based on analytic calculation of losses include the ability to reuse and recombine existing models, the ability to analyze interactions between the components and subsystems in the electric drive train (something which is impossible when considering different subsystems as independent blocks, as is commonly done in theanalytical calculation of efficiencies), the ability to analyze in a rather straightforward manner the effect of selections other than physical components, for example control algorithms, and the ability to verify assumptions of the effects of a particular design change on the efficiency of the whole system. Based on the work, it can be concluded that differences between two configurations can be seen in the economic performance with only minor modifications to the simulation models used in the network interaction and control method study. This eliminates the need ofdeveloping analytic expressions for losses and enables the study of the system as a whole instead of modeling it as series connection of independent blocks with no lossinterdependencies. Three example cases (site matching, component selection, control principle selection) are provided to illustrate the usage of the approach and analyze its performance.

Genesis and Emplacement of Carbonatites and Lamprophyres in the Svecofennian Domain

A small carbonatite dyke swarm has been identified at Naantali, southwest Finland. Several swarms of shoshonitic lamprophyres are also known along the Archean-Proterozoic boundary in eastern Finland and northwest Russia. These intrusions, along with the carbonatite intrusion at Halpanen, eastern Finland, represent a stage of widespread low-volume mantle-sourced alkaline magmatism in the Svecofennian Domain. Using trace element and isotope geochemistry coupled with precise geochronology from these rocks, a model is presented for the Proterozoic metasomatic evolution of the Fennoscandian subcontinental lithospheric mantle. At ~2.2-2.06 Ga, increased biological production in shallow seas linked to continental rifting, resulted in increased burial rates of organic carbon. Subduction between ~1.93-1.88 Ga returned organic carbon-enriched sediments of mixed Archean and Proterozoic provenance to the mantle. Dehydration reactions supplied water to the mantle wedge, driving arc volcanism, while mica, amphibole and carbonate were brought deeper into the mantle with the subducting slab. The cold subducted slab was heated conductively from the surrounding warm mantle, while pressures continued to gradually increase as a result of crustal thickening. The sediments began to melt in a two stage process, first producing a hydrous alkaline silicate melt, which infiltrated the mantle wedge and crystallised as metasomatic veins. At higher temperatures, carbonatite melt was produced, which preferentially infiltrated the pre-existing metasomatic vein network. At the onset of post-collisional extension, deep fault structures formed, providing conduits for mantle melts to reach the upper crust. Low-volume partial melting of the enriched mantle at depths of at least 110 km led to the formation of first carbonatitic magma and subsequently lamprophyric magma. Carbonatite was emplaced in the upper crust at Naantali at 1795.7 ± 6.8 Ma; lamprophyres along the Archean-Proterozoic boundary were emplaced between 1790.1 ± 3.3 Ma and 1781 ± 20 Ma.

Boundary identification in the domain of a parabolic partial differential equation

Bakgrunden och inspirationen till föreliggande studie är tidigare forskning i tillämpningar på randidentifiering i metallindustrin. Effektiv randidentifiering möjliggör mindre säkerhetsmarginaler och längre serviceintervall för apparaturen i industriella högtemperaturprocesser, utan ökad risk för materielhaverier. I idealfallet vore en metod för randidentifiering baserad på uppföljning av någon indirekt variabel som kan mätas rutinmässigt eller till en ringa kostnad. En dylik variabel för smältugnar är temperaturen i olika positioner i väggen. Denna kan utnyttjas som insignal till en randidentifieringsmetod för att övervaka ugnens väggtjocklek. Vi ger en bakgrund och motivering till valet av den geometriskt endimensionella dynamiska modellen för randidentifiering, som diskuteras i arbetets senare del, framom en flerdimensionell geometrisk beskrivning. I de aktuella industriella tillämpningarna är dynamiken samt fördelarna med en enkel modellstruktur viktigare än exakt geometrisk beskrivning. Lösningsmetoder för den s.k. sidledes värmeledningsekvationen har många saker gemensamt med randidentifiering. Därför studerar vi egenskaper hos lösningarna till denna ekvation, inverkan av mätfel och något som brukar kallas förorening av mätbrus, regularisering och allmännare följder av icke-välställdheten hos sidledes värmeledningsekvationen. Vi studerar en uppsättning av tre olika metoder för randidentifiering, av vilka de två första är utvecklade från en strikt matematisk och den tredje från en mera tillämpad utgångspunkt. Metoderna har olika egenskaper med specifika fördelar och nackdelar. De rent matematiskt baserade metoderna karakteriseras av god noggrannhet och låg numerisk kostnad, dock till priset av låg flexibilitet i formuleringen av den modellbeskrivande partiella differentialekvationen. Den tredje, mera tillämpade, metoden kännetecknas av en sämre noggrannhet förorsakad av en högre grad av icke-välställdhet hos den mera flexibla modellen. För denna gjordes även en ansats till feluppskattning, som senare kunde observeras överensstämma med praktiska beräkningar med metoden. Studien kan anses vara en god startpunkt och matematisk bas för utveckling av industriella tillämpningar av randidentifiering, speciellt mot hantering av olinjära och diskontinuerliga materialegenskaper och plötsliga förändringar orsakade av “nedfallande” väggmaterial. Med de behandlade metoderna förefaller det möjligt att uppnå en robust, snabb och tillräckligt noggrann metod av begränsad komplexitet för randidentifiering.

Applications of graph transformation in tools for domain-specific modeling languages

The use of domain-specific languages (DSLs) has been proposed as an approach to cost-e ectively develop families of software systems in a restricted application domain. Domain-specific languages in combination with the accumulated knowledge and experience of previous implementations, can in turn be used to generate new applications with unique sets of requirements. For this reason, DSLs are considered to be an important approach for software reuse. However, the toolset supporting a particular domain-specific language is also domain-specific and is per definition not reusable. Therefore, creating and maintaining a DSL requires additional resources that could be even larger than the savings associated with using them. As a solution, di erent tool frameworks have been proposed to simplify and reduce the cost of developments of DSLs. Developers of tool support for DSLs need to instantiate, customize or configure the framework for a particular DSL. There are di erent approaches for this. An approach is to use an application programming interface (API) and to extend the basic framework using an imperative programming language. An example of a tools which is based on this approach is Eclipse GEF. Another approach is to configure the framework using declarative languages that are independent of the underlying framework implementation. We believe this second approach can bring important benefits as this brings focus to specifying what should the tool be like instead of writing a program specifying how the tool achieves this functionality. In this thesis we explore this second approach. We use graph transformation as the basic approach to customize a domain-specific modeling (DSM) tool framework. The contributions of this thesis includes a comparison of di erent approaches for defining, representing and interchanging software modeling languages and models and a tool architecture for an open domain-specific modeling framework that e ciently integrates several model transformation components and visual editors. We also present several specific algorithms and tool components for DSM framework. These include an approach for graph query based on region operators and the star operator and an approach for reconciling models and diagrams after executing model transformation programs. We exemplify our approach with two case studies MICAS and EFCO. In these studies we show how our experimental modeling tool framework has been used to define tool environments for domain-specific languages.

Frequency-Domain and Wide-Pulse Time-Domain Measurements of Lanthanide Luminescence and Lanthanide-Based Resonance Energy Transfer

Resonance energy transfer (RET) is a non-radiative transfer of the excitation energy from the initially excited luminescent donor to an acceptor. The requirements for the resonance energy transfer are: i) the spectral overlap between the donor emission spectrum and the acceptor absorption spectrum, ii) the close proximity of the donor and the acceptor, and iii) the suitable relative orientations of the donor emission and the acceptor absorption transition dipoles. As a result of the RET process the donor luminescence intensity and the donor lifetime are decreased. If the acceptor is luminescent, a sensitized acceptor emission appears. The rate of RET depends strongly on the donor–acceptor distance (r) and is inversely proportional to r6. The distance dependence of RET is utilized in binding assays. The proximity requirement and the selective detection of the RET-modified emission signal allow homogeneous separation free assays. The term lanthanide-based RET is used when luminescent lanthanide compounds are used as donors. The long luminescence lifetimes, the large Stokes’ shifts and the intense, sharply-spiked emission spectra of the lanthanide donors offer advantages over the conventional organic donor molecules. Both the organic lanthanide chelates and the inorganic up-converting phosphor (UCP) particles have been used as donor labels in the RET based binding assays. In the present work lanthanide luminescence and lanthanide-based resonance energy transfer phenomena were studied. Luminescence lifetime measurements had an essential role in the research. Modular frequency-domain and time-domain luminometers were assembled and used successfully in the lifetime measurements. The frequency-domain luminometer operated in the low frequency domain ( 100 kHz) and utilized a novel dual-phase lock-in detection of the luminescence. One of the studied phenomena was the recently discovered non-overlapping fluorescence resonance energy transfer (nFRET). The studied properties were the distance and temperature dependences of nFRET. The distance dependence was found to deviate from the Förster theory and a clear temperature dependence was observed whereas conventional RET was completely independent of the temperature. Based on the experimental results two thermally activated mechanisms were proposed for the nFRET process. The work with the UCP particles involved the measurement of the luminescence properties of the UCP particles synthesized in our laboratory. The goal of the UCP particle research is to develop UCP donor labels for binding assays. In the present work the effect of the dopant concentrations and the core–shell structure on the total up-conversion luminescence intensity, the red–green emission ratio, and the luminescence lifetime was studied. Also the non-radiative nature of the energy transfer from the UCP particle donors to organic acceptors was demonstrated for the first time in aqueous environment and with a controlled donor–acceptor distance.

Ultra-sonografia intra-operatória durante colecistectomia laparoscópica

Durante um período de sete meses, em noventa pacientes submetidos à colecistectomia laparoscópica foi realizada ultra-sonografia intra-operatória e, em 81 pacientes, a colangiografia intra-operatória foi possível. A ultra-sonografia laparoscópica (USL) foi realizada através dos trocartes umbilical e epigástrico, sem mobilização duodenal e após a colangiografia sistemática. A USL detectou coledocolitíase em 11 pacientes (12,2%), embora apenas seis (6,6%) destes pacientes tivessem este diagnóstico antes da cirurgia. A colangiografia diagnosticou coledocolitíase em 8,8% dos casos. As vias biliares foram visualizadas pela USL em todos os casos. Durante a colecistectomia laparoscópica, a ultra-sonografia intra-operatória é uma técnica simples e eficiente na detecção de cálculos na via biliar principal.

Efeito do dextran sobre a intensidade das aderências peritoneais intra-abdominais pós-operatórias: estudo experimental em ratos: experimental study in rats

Os autores pesquisam o efeito do Dextran 40 sobre a formação de aderências pós-operatórias em um modelo experimental em ratos. Vinte ratos Wistar foram divididos de forma aleatória em dois grupos. Ambos os grupos foram submetidos a laparotomia mediana e realizada escarificação serosa do peritônio visceral do intestino grosso e peritônio parietal adjacente. O grupo I (controle), formado por dez animais que não receberam tratamento complementar, e o grupo 2, formado por dez animais nos quais administrou-se Dextran 40 na cavidade peritoneal. No vigésimo dia de pós-operatório, os animais foram mortos e submetidos a nova laparotomia mediana e retirada dos segmentos intestinais previamente escarificados. A análise histológica das peças operatórias demonstrou menor formação de fibrose no grupo de animais nos quais foi utilizado Dextran 40 (grupo 2), quando comparados ao grupo controle (p<0,05). Os autores concluem que o Dextran 40 interfere no processo de fibrinogênese reduzindo as aderências intra-abdominais pós-operatórias.

Avaliação diagnóstica da laparoscopia associada à análise do líquido intraperitoneal nas lesões intra-abdominais provocadas por arma de ar comprimido: estudo experimental em cães

Avaliação de eficácia da laparoscopia, associada à análise bacteriológica do líquido intraperitoneal pela coloração de Gram., no diagnóstico de lesões intra-abdominais provocadas em cães com arma de ar comprimido. A alta incidência de óbitos como resultado de ferimentos por arma de fogo tem contribuído para implantação de novas técnicas diagnósticas. O uso crescente de laparoscopia diagnóstica em urgências torna necessário aprimorar qualidade e fidedignidade dos resultados obtidos. Este experimento avalia acurácia, sensibilidade e especificidade da laparoscopia, incluindo 20 cães submetidos a trauma abdominal, com disparo do tipo encostado, e cinco cães como grupo de controle. Na laparoscopia, foram feitos inventário sistemático da cavidade abdominal, conferido por laparotomia, e coleta de líquido intraperitoneal para análise bacteriológica. A laparoscopia apresentou acurácia de 88,29%, sensibilidade de 88,29% e especificidade de 100%. O valor preditivo positivo da coloração de Gram foi 100%. Concluiu-se que a laparoscopia é eficaz no diagnóstico de lesões intra-abdominais provocadas por arma de ar comprimido, em cães hemodinamicamente estáveis. Mas, algumas lesões, evidenciadas na laparotomia, passaram despercebidas na laparoscopia. Realização concomitante de análise bacteriológica pela coloração de Gram pode aumentar a eficácia e diminuir a possibilidade de erros no diagnóstico de lesões. Laparoscopia associada à análise bacteriológica possibilita melhores resultados com mínimo dano ao paciente

Preparo intra-operatório do cólon

OBJETIVO: Apresentar nossa experiência com o preparo intra-operatório do cólon no tratamento de pacientes com obstrução neoplásica do cólon esquerdo. MÉTODO: Vinte e três pacientes com obstrução neoplásica do cólon esquerdo foram operados no Hospital de Ensino da Faculdade de Medicina do ABC e no Hospital São Bernardo no período de 1992 a 1999. O preparo intra-operatório do cólon e a anastomose intestinal primária foram realizados em todos os pacientes e os resultados analisados. RESULTADOS: Em todos os pacientes o preparo de cólon foi adequado e a anastomose intestinal primária foi realizada em condições satisfatórias. Um paciente (4,3%) apresentou fístula bloqueada e outro (4,3%) broncopneumonia, complicações estas não relacionadas com o método de preparo intestinal; ambos evoluíram bem com tratamento clínico. Os demais não apresentaram complicações e permaneceram internados em média sete dias. CONCLUSÕES: O preparo intra-operatório do cólon é um método simples, seguro e permite a reconstrução imediata do trânsito intestinal em situações adversas.

Terapia trombolítica intra-arterial intra-operatória

OBJETIVO: Apresentar um tratamento coadjuvante à desobstrução mecânica, nas oclusões arteriais agudas de membros. MÉTODO: A impossibilidade de desobstrução mecânica cirúrgica completa dos vasos tem levado a altas taxas de amputações. Utilizamos como coadjuvante desta a aplicação de agente trombolítico intra-operatório, intra-arterial regional, seguida da infusão de solução de diálise peritoneal à baixa temperatura. RESULTADO: Neste pequeno grupo de doentes, verificamos que o uso de fibrinolítico seguido da lavagem da árvore arterial com solução preservadora, à baixa temperatura, aumenta a taxa de sucesso cirúrgico com preservação do membro e sua função. CONCLUSÃO: A terapia trombolítica intra-arterial regional, associada ao uso de solução de diálise peritoneal heparinizada, apresentou um percentual de sucesso de 88,88% dos casos tratados com este método.