Prótese parcial removível retida por implantes: relato de caso

A ausência de dentes posteriores inferiores representa dificuldades no planejamento e controle de próteses parciais removíveis, pois o suporte é proporcionado por dentes e mucosa, que apresentam características anatômicas diferentes. O planejamento de próteses parciais removíveis apoiadas sobre implantes na região distal torna a prótese dento-implanto-suportada e não dento-muco-suportada sendo, uma opção aos casos de extremidade livre. Por meio deste relato de caso, um paciente portador de arco classe II de Kennedy foi reabilitado com prótese parcial removível apoiada sobre implante na região distal. A colocação do implante resultou em uma oclusão mais estável, o que melhorou a funcionalidade da prótese e proporcionou maior conforto ao paciente. Observou-se que esta resolução pode ser uma alternativa viável de tratamento, pois apresenta custo reduzido em relação à prótese fixa sobre implantes, entretanto, requer um acompanhamento em longo prazo com uma série de casos para tornar-se um método rotineiro de tratamento.

Prótese parcial removível retida por implantes: relato de caso

A ausência de dentes posteriores inferiores representa dificuldades no planejamento e controle de próteses parciais removíveis, pois o suporte é proporcionado por dentes e mucosa, que apresentam características anatômicas diferentes. O planejamento de próteses parciais removíveis apoiadas sobre implantes na região distal torna a prótese dento-implanto-suportada e não dento-muco-suportada sendo, uma opção aos casos de extremidade livre. Por meio deste relato de caso, um paciente portador de arco classe II de Kennedy foi reabilitado com prótese parcial removível apoiada sobre implante na região distal. A colocação do implante resultou em uma oclusão mais estável, o que melhorou a funcionalidade da prótese e proporcionou maior conforto ao paciente. Observou-se que esta resolução pode ser uma alternativa viável de tratamento, pois apresenta custo reduzido em relação à prótese fixa sobre implantes, entretanto, requer um acompanhamento em longo prazo com uma série de casos para tornar-se um método rotineiro de tratamento.

Implementações metodológicas para o estudo eletrofisiológico e comportamental em um modelo animal de autismo

O autismo é um transtorno do desenvolvimento que se manifesta nos primeiros anos de vida e apresenta semiologia heterogênea. Esta patologia afeta a maturação do encéfalo e produz alterações sensoriais, de linguagem e de interação social no início na infância. O modelo experimental de autismo utilizando ácido valproico (VPA) durante o período gestacional tem sido demonstrado ter alta validade de face e permitir estudos tanto das bases neuropatológicas quanto neuro-funcionais durante o desenvolvimento. A despeito do recente interesse por este modelo como instrumento de compreensão dos aspectos básicos da fisiopatologia do autismo, a maioria dos estudos experimentais têm se concentrado nos aspectos comportamentais, histológicos e celulares. Neste trabalho, foram propostas estratégias experimentais de avaliação comportamental associadas a eletrofisiologia \textit{in vivo}, uma técnica que nunca fora utilizada para avaliação desse modelo. Animais controles e experimentais, submetidos previamente a um procedimento cirúrgico para implante de eletrodos crônicos, participaram de experimentos de livre exploração, interação social e condicionamento ao medo.

Avaliação da adaptação marginal de diferentes tipos de restaurações obtidas por CAD/CAM e métodos convencionais

The past few decades have brought many changes to the dental practice and the technology has become ready available. The result of a satisfactory rehabilitation treatment basically depends on the balance between biological and mechanical factors. The marginal adaptation of crowns and prosthetic structures is vital factor for long-term success. The development of CAD / CAM technology in the manufacture of dental prostheses revolutionized dentistry, this technology is capable of generating a virtual model from the direct digital scanning from the mouth, casts or impressions. It allows the planning and design of the structure in a computered software. The virtual projects are obtained with high precision and a significant reduction in clinical and laboratory time. Thus, the present study (Chapters 1, 2 and 3) computed microtomography was used to evaluate, different materials, different CAD/CAM systems, different ways of obtaining virtual model (with direct or indirect scanning), and in addition, also aims to evaluate the influence of cementing agent in the final adaptation of crowns and copings obtained by CAD / CAM. Furthermore, this study (Chapter 4, 5 and 6) also aims to evaluate significant differences in vertical and horizontal misfits in abutment-free frameworks on external hexagon implants (HE) using full castable UCLAs, castable UCLAs with cobalt-chromium pre-machined bases and obtained by CAD / CAM with CoCr or Zirconia by different scanning and milling systems. For this, the scanning electron microscopy and interferometry were used. It was concluded that the CAD / CAM technology is capable to produce restorations, copings and screw-retained implant-supported frameworks in different materials and systems offering satisfactory results of marginal accuracy, with significative reduction in clinical and laboratory time.

Avaliação comparativa da remodelação óssea periimplantar em implantes com junção cone-morse e hexágono externo: estudo clínico randomizado controlado, duplo cego, boca dividida

Background: Several theories, such as the biological width formation, the inflammatory reactions due to the implant-abutment microgap contamination, and the periimplant stress/strain concentration causing bone microdamage accumulation, have been suggested to explain early periimplant bone loss. However, it is yet not well understood to which extent the implant-abutment connection type may influence the remodeling process around dental implants. Aim: to evaluate clinical, bacteriological, and biomechanical parameters related to periimplant bone loss at the crestal region, comparing external hexagon (EH) and Morse-taper (MT) connections. Materials and methods: Twelve patients with totally edentulous mandibles received four custom made Ø 3.8 x 13 mm implants in the interforaminal region of the mandible, with the same design, but different prosthetic connections (two of them EH or MT, randomly placed based on a split-mouth design), and a immediate implant- supported prosthesis. Clinical parameters (periimplant probing pocket depth, modified gingival index and mucosal thickness) were evaluated at 6 sites around the implants, at a 12 month follow-up. The distance from the top of the implant to the first bone-to-implant contact – IT-FBIC was evaluated on standardized digital peri-apical radiographs acquired at 1, 3, 6 and 12 months follow-up. Samples of the subgingival microbiota were collected 1, 3 and 6 months after implant loading. DNA were extracted and used for the quantification of Tanerella forsythia, Porphyromonas gingivalis, Aggragatibacter actinomycetemcomitans, Prevotella intermedia and Fusobacterium nucleatum. Comparison among multiple periods of observation were performed using repeated-measures Analysis of Variance (ANOVA), followed by a Tukey post-hoc test, while two-period based comparisons were made using paired t- test. Further, 36 computer-tomographic based finite element (FE) models were accomplished, simulating each patient in 3 loading conditions. The results for the peak EQV strain in periimplant bone were interpreted by means of a general linear model (ANOVA). Results: The variation in periimplant bone loss assessed by means of radiographs was significantly different between the connection types (P<0.001). Mean IT-FBIC was 1.17±0.44 mm for EH, and 0.17±0.54 mm for MT, considering all evaluated time periods. All clinical parameters presented not significant differences. No significant microbiological differences could be observed between both connection types. Most of the collected samples had very few pathogens, meaning that these regions were healthy from a microbiological point of view. In FE analysis, a significantly higher peak of EQV strain (P=0.005) was found for EH (mean 3438.65 µ∑) compared to MT (mean 840.98 µ∑) connection. Conclusions: Varying implant-abutment connection type will result in diverse periimplant bone remodeling, regardless of clinical and microbiological conditions. This fact is more likely attributed to the singular loading transmission through different implant-abutment connections to the periimplant bone. The present findings suggest that Morse-taper connection is more efficient to prevent periimplant bone loss, compared to an external hexagon connection.

Quantitative evaluation of visual function 12 months after bilateral implantation of a diffractive trifocal IOL

PURPOSE: To quantitatively evaluate visual function 12 months after bilateral implantation of the Physiol FineVision® trifocal intraocular lens (IOL) and to compare these results with those obtained in the first postoperative month. METHODS: In this prospective case series, 20 eyes of 10 consecutive patients were included. Monocular and binocular, uncorrected and corrected visual acuities (distance, near, and intermediate) were measured. Metrovision® was used to test contrast sensitivity under static and dynamic conditions, both in photopic and low-mesopic settings. The same software was used for pupillometry and glare evaluation. Motion, achromatic, and chromatic contrast discrimination were tested using 2 innovative psychophysical tests. A complete ophthalmologic examination was performed preoperatively and at 1, 3, 6, and 12 months postoperatively. Psychophysical tests were performed 1 month after surgery and repeated 12 months postoperatively. RESULTS: Final distance uncorrected visual acuity (VA) was 0.00 ± 0.08 and distance corrected VA was 0.00 ± 0.05 logMAR. Distance corrected near VA was 0.00 ± 0.09 and distance corrected intermediate VA was 0.00 ± 0.06 logMAR. Glare testing, pupillometry, contrast sensitivity, motion, and chromatic and achromatic contrast discrimination did not differ significantly between the first and last visit (p>0.05) or when compared to an age-matched control group (p>0.05). CONCLUSIONS: The Physiol FineVision® trifocal IOL provided satisfactory full range of vision and quality of vision parameters 12 months after surgery. Visual acuity and psychophysical tests did not vary significantly between the first and last visit.

Are Complications Associated With the Repiphysis(®) Expandable Distal Femoral Prosthesis Acceptable for Its Continued Use?

BACKGROUND: Reconstruction of the distal femur after resection for malignant bone tumors in skeletally immature children is challenging. The use of megaprostheses has become increasingly popular in this patient group since the introduction of custom-made, expandable devices that do not require surgery for lengthening, such as the Repiphysis(®) Limb Salvage System. Early reports on the device were positive but more recently, a high complication rate and associated bone loss have been reported. QUESTIONS/PURPOSES: We asked: (1) what are the clinical outcomes using the Musculoskeletal Tumor Society (MSTS) scoring system after 5-year minimum followup in patients treated with this prosthesis at one center; (2) what are the problems and complications associated with the lengthening procedures of this implant; and (3) what are the specific concerns associated with revision of this implant? METHODS: At our institute, between 2002 and 2007, the Repiphysis(®) expandable prosthesis was implanted in 15 children (mean age, 8 years; range, 6-11 years) after distal femoral resection for malignant bone tumors. During this time, the general indication for use of this implant was resection of the distal femur for localized malignant bone tumors in pediatric patients. Alternative techniques used for this indication were modular prosthetic reconstruction, massive (osteoarticular or intercalary) allograft reconstruction, or rotationplasty. Age and tumor extension were the main factors to decide on the surgical indication. Of the 15 patients who had this prosthesis implanted during reconstruction surgery, five died with the implant in situ or underwent amputation before 5 years followup and the remaining 10 were evaluated at a minimum of 5 years (mean, 104 months; range, 78-140 months). No patients were lost to followup. These 10 patients were long-term survivors and underwent the lengthening program. They were included in our study analysis. The first seven lengthening procedures were attempted in an outpatient setting; however, owing to pain and burning sensations experienced by the patients, the procedures failed to achieve the desired lengthening. Therefore, other procedures were performed with the patients under general anesthesia. We reviewed clinical data at index surgery for all 15 patients. We further analyzed the lengthening procedures, implant survival, radiographic and functional results, for the 10 long-term survivors. Functional results were assessed according to the MSTS scoring system. Complications were classified according to the International Society of Limb Salvage (ISOLS) classification system. RESULTS: Nine of the 10 survivors underwent revision of the implant for mechanical failure. They had a mean MSTS score of 64% (range, 47%-87%) before revision surgery. At final followup the 10 long-term surviving patients had an average MSTS score of 81% (range, 53%-97%). In total, we obtained an average lengthening of 39 mm per patient (range, 17-67 mm). Exact expansion of the implant was unpredictable and difficult to control. Nine of 10 of the long-term surviving patients underwent revision surgery of the prosthesis-eight for implant breakage and one for stem loosening. At revision surgery, six patients had another type of expandable prosthesis implanted and three had an adult-type megaprosthesis implanted. In five cases, segmental bone grafts were used during revision surgery to compensate for loss of bone stock. CONCLUSIONS: We could not comfortably expand the Repiphysis(®) prosthesis in an outpatient setting because of pain experienced by the patients during the lengthening procedures. Furthermore, use of the prosthesis was associated with frequent failures related to implant breakage and stem loosening. Revisions of these procedures were complex and difficult. We no longer use this prosthesis and caution others against the use of this particular prosthesis design. LEVEL OF EVIDENCE: Level IV, therapeutic study.

Dor na extremidade da haste tibial na artroplastia do joelho e sua relação com efeitos de origem mecânica

Uma das causas de insucesso nas artroplastias do joelho está relacionada com a dor que os doentes sentem a curto e/ou longo prazo. A dor tanto pode ser devida a infecção ou descolamento, como pode estar presente sem qualquer um destes factores, provocando a substituição da prótese. Existem estudos de origem clínica que relatam uma percentagem, que se pode considerar relevante, de dor na extremidade da haste, quer na zona da tíbia quer no fémur [1-3]. A nível ósseo, a cintigrafia pode mostrar as alterações metabólicas locais, antes de qualquer tradução radiográfica [4]. O aumento da carga, a nível ósseo, estimula localmente a actividade osteoblástica [4]. Esta estimulação pode originar dor local, como demonstrado num caso clínico por Fonseca et al. [5], referente a um doente com dor na extremidade da haste de uma prótese do joelho e onde a cintigrafia com Tc 99m [5] mostrava uma actividade celular mais intensa em torno da extremidade. O presente estudo teve como objectivo verificar até que ponto é possível estabelecer uma relação entre o sintoma dor e o comportamento biomecânico da haste da prótese do joelho e, particularmente, na sua extremidade. A análise relativa ao nível de tensões no osso, em torno da haste tibial, comparativamente ao valor do osso intacto para o mesmo tipo de carga e localização, foi realizada utilizando a aplicação de análise estrutural HyperWorks (Altair Engineering Inc.). Um estudo posterior, relativo à forma e material da extremidade da haste levou à conclusão de que é possível uma melhor uniformização das tensões no osso, podendo-se desta forma aproximar às tensões fisiológicas. Neste sentido, a forma geometral da haste deverá ser objecto de optimização, que poderá incluir materiais poliméricos, de menor rigidez, na ponta distal do implante.

Hallux rigidus: Arthroplasty or arthrodesis. What technique produces better results?

Hallux rígidus (HR) affects the first metatarsophalangeal joint (MTPJ) between 35% and 60% of the population over 65 years and there are multiple ways of treatment. Depending on the radiological stage where you find the deformity determines the procedure to be performed; in the early stages cheilectomy techniques and corrective osteotomy is performed while the more advanced ratings, the surgeon chooses destructive techniques considered as arthrodesis and arthroplasty. This final of degree project aims to focus on 1 MTPJ destructive techniques to clarify which of the procedures generates better results by a number of parameters; outcomes of the American Orthopaedic Foot scale and Ankle Society Hallux metatarsophalangeal Interphalangeal-scale (AOFAS), range of motion (ROM) of the 1ºAMTF, radiological classification. As for the implant arthroplasty technique, this article offers information on material and design that generates better relating to patient characteristics such as age, inflammatory joint diseases, viability and durability of the implant results. The conclusion from this review is that the values obtained in the arthrodesis according AOFAS decrease due to loss of mobility, but both techniques have similar values of effectiveness and concludes with the decision that the technique used is determined taking into account various factors and patient characteristics. Keywords: Hallux rígidus; (Hallux Rígidus) and surgery treatment; Hallux Rígidus arthrodesis; Hallux Rígidus arthroplasty; Hallux Rígidus (arthroplasty and arthrodesis).

Modélisation pour l'imagerie des composites par ondes guidées

Parmi les méthodes les plus utilisées en inspection embarquée des structures (Structural Health Monitoring ou SHM), les techniques d’imagerie basées sur un modèle de propagation sont de plus en plus répandues. Pour les techniques d'imagerie basées sur un modèle de propagation, bien que ces techniques montent en popularité, la complexité des matériaux composites réduit grandement leur performance en détection d'endommagements comparativement aux démonstrations précédentes de leur potentiel sur des matériaux isotropes. Cette limitation dépend entre autres des hypothèses simplificatrices souvent posées dans les modèles utilisés et peut entraîner une augmentation des faux positifs et une réduction de la capacité de ces techniques à détecter des endommagements. Afin de permettre aux techniques d'imagerie basées sur un modèle d'offrir une performance équivalente à celle obtenue précédemment sur les structures métalliques, il est nécessaire d'exploiter des modèles de propagation considérant la dynamique complexe des ondes dans ce type de structures. Cette thèse présente les travaux effectués sur la modélisation de la propagation des ondes guidées dans les matériaux composites. En première partie, une amélioration simple des modèles de génération et de propagation est proposée afin de permettre de mieux reconstruire les signaux générés et propagés sur une structure composite. Par la suite, le potentiel de la technique « Excitelet » à détecter et positionner adéquatement un ou plusieurs endommagements sur un matériau, peu importe son empilement (d’un composite unidirectionnel à un matériau isotrope), est démontré tant pour le mode A[indice inférieur 0] que le mode S[indice inférieur 0]. Les résultats obtenus numériquement et expérimentalement démontrent une corrélation directe entre l'amélioration des modèles mathématiques derrière les techniques d'imagerie et la robustesse des techniques pour ce qui est de la précision sur le positionnement du dommage et du niveau de corrélation obtenu. Parmi les améliorations à la technique d'imagerie « Excitelet » proposées, une amélioration significative des résultats en imagerie est démontrée en considérant la distribution de cisaillement plan sous l’émetteur, ce qui est une nouveauté par rapport aux travaux de recherche précédents en imagerie. La performance de la technique d'imagerie via la modélisation de la propagation d'ondes guidées dans les laminés multicouches transverses isotropes est par la suite démontrée. Les équations de l'élasticité en 3D sont utilisées pour bien modéliser le comportement dispersif des ondes dans les composites, et cette formulation est par la suite implantée dans la technique d'imagerie « Excitelet ». Les résultats démontrent que l'utilisation d'une formulation mathématique plus avancée permet d'augmenter la précision quant au positionnement des dommages et à l'amplitude de la corrélation obtenue lors de la détection d'un dommage. Une analyse exhaustive de la sensibilité de la technique d’imagerie et de la propagation d’ondes aux conditions environnementales et à la présence de revêtement sur la structure est présentée en dernière partie. Les résultats obtenus montrent que la considération de la propagation complexe dans la formulation d’imagerie ainsi que la caractérisation des propriétés mécaniques « a priori » de l’imagerie améliorent la robustesse de la technique et confèrent à la technique « Excitelet » la capacité de détecter et positionner précisément un endommagement, peu importe le type de structure.

Importância da rugosidade da superfície implantar

Desde 1965 em que se colocaram as primeiras próteses osteointegradas sob os princípios de Brånemark, a implantologia sofreu uma constante e notória evolução e consiste, hoje, na primeira linha de tratamento em reabilitação oral. Os mecanismos que induzem a adesão óssea ou a união entre o implante e o osso, ainda não são perfeitamente conhecidos. As conclusões que se obtiveram das pesquisas, demostraram que a taxa de osteointegração dos impantes e o índice de sucesso relacionam-se com a composição química e com a rugosidade da superfície. Os implantes com rugosidades superficiais possuem maior estabilidade primária e modificam os mecanismos de interação das células com a superfície, quando comparados com os de superfície lisa. Quanto à composição química das superfícies dos implantes, as enriquecidas com cálcio e hidroxiapatite, favorecem e promovem o processo de cicatrização e de deposição óssea. Os estudos comparativos entre as superfícies modificadas por métodos de tratamento físicos e/ou químicos, quando comparados com as superfícies maquinadas, demonstram a superioridade das superfícies rugosas em muitos aspectos biomecânicos, sendo hoje um consenso entre a comunidade científica, a superioridade das superfícies modificadas. Independentemente das evidências científicas apontarem para maiores taxas de sucesso associadas ás superfícies tratadas, ainda há um longo caminho a percorrer para colmatar todas as falhas existentes na atualidade. O objetivo deste trabalho foi a realização de uma revisão bibliográfica, através da pesquisa de artigos da Pubmed, B-On, Science Direct, Scielo de forma a aprofundar conhecimentos das vantagens e desvantagens da rugosidade presente na superfície implantar, assim como alertar os médicos dentistas para a importância a ter com a rugosidade em excesso e tentar perceber qual a rugosidade dita ideal. Não se limitou o tempo de pesquisa mas deu-se relevância a referências científicas dos últimos 20 anos, publicados em língua portuguesa e inglesa.

Evaluación del efecto de la inclinación de dos implantes no ferulizados sobre el comportamiento protésico de sobredentaduras en pacientes desdentados mandibulares.

Las sobredentaduras implantosoportadas son una alternativa clínica que aumenta constantemente su frecuencia de uso. El éxito o fracaso depende de factores intrínsecos o extrínsecos que pueden comprometer la terapéutica. Algunos factores como la angulación del implante podrían estar relacionados con el comportamiento clínico

Socket-shield and immediate implantation

Introduction - After tooth extraction, the alveolar bone undergoes a remodeling process, wich leads to horizontal and vertical bone loss. These resorption processes complicate dental rehabilitation, particularly in connection with implants. Various methods of guided bone regeneration have been described to retain the original dimension of the bone after extraction. Most procedures use filler materials and membranes to support the buccal plate and soft tissue, to stabilize the coagulum and to prevent epithelial ingrowth. It has also been suggested that resorption of the buccal bundle bone can be avoided by leaving a buccal root segment (socket-shield technique) in place, because the biological integrity of the buccal periodontum remains untouched. This method has also been decribed in connection with immediate implant placement. Objective - This literature review aim enumerate and describe the different treatments and tissue reactions after tooth extraction, immediate and delayed implantation. The socketshield technique, the evolution in tooth extraction and immediate implantation with high esthetic results due to the preservation of hard and soft tissues by leaving a buccal root segment in place. Materials and methods - For this purpose a research has been done and data was obtained from on-line resources: Medline, Pubmed, Scielo, Bireme, Bon, books and specialized magazines which was conducted between January 2016 and May 2016. A number of articles have been obtained in English and French ,published between 1997 and 2015 . The key words used were implantology, dental implant, hard/soft tissue, tooth extraction, immediate implantation, delayed implantation, socket-shield. Conclusion - In socket-shield technique, there were neither functional nor aesthetic changes in soft and hard tissues. It’s already a routine practice in the arsenal of highaesthetic immediate implantology and should be used when indicated. Although this technique is quiet promising, we should be aware of the incoming publications about a larger follow up and the predictability of leaving a fragment inside the socket after an extraction.

Mucosite e Peri-Implantite

O processo de infecção no sulco peri-implantar leva, inicialmente, a formação de uma mucosite peri-implantar, que pode ser definida como uma inflamação dos tecidos moles periimplantares, sem ocasionar perda óssea, sendo reversível, se o seu diagnóstico for prematuro. A mucosite é definida como inflamação dos tecidos marginais ao redor dos implantes em função. A doença peri-implantar é caracterizada por um processo inflamatório que ocorre a volta dos implantes osseointegrados em função, afecta tecidos moles e duros, e traz como resultado um quadro de perda do osso de suporte do implante e pode ser diagnosticada da mesma forma que a doença periodontal. O objectivo desse trabalho é fazer uma revisão de literatura específica, entre os anos 2000 e 2015 sobre os aspectos clínicos da mucosite e da doença peri-implantar respectivamente, assim como fatores etiológicos, sinais clínicos e radiográficos da doença, e alguns tratamentos propostos na literatura. Estarão escritos os tratamentos como raspagem e curetagem, tratamentos com produtos químicos, terapia fotodinâmica, antibioticoterapia sistêmica e local, uso de membranas e enxertos ósseos. As doenças peri-implantares podem indicar risco de insucesso para o implante, mas podem também ser temporárias e passíveis de tratamento. O estudo conclui, finalmente, que quanto mais cedo o diagnóstico e intervenção, melhor o resultado do tratamento, sendo essencial o monitoramento pelo médico-dentista dos pacientes implantados.

Functional alkali tantalate 2D structures for microelectronics and related applications

Alkali tantalates and niobates, including K(Ta / Nb)O3, Li(Ta / Nb)O3 and Na(Ta / Nb)O3, are a very promising ferroic family of lead-free compounds with perovskite-like structures. Their versatile properties make them potentially interesting for current and future application in microelectronics, photocatalysis, energy and biomedics. Among them potassium tantalate, KTaO3 (KTO), has been raising interest as an alternative for the well-known strontium titanate, SrTiO3 (STO). KTO is a perovskite oxide with a quantum paraelectric behaviour when electrically stimulated and a highly polarizable lattice, giving opportunity to tailor its properties via external or internal stimuli. However problems related with the fabrication of either bulk or 2D nanostructures makes KTO not yet a viable alternative to STO. Within this context and to contribute scientifically to the leverage tantalate based compounds applications, the main goals of this thesis are: i) to produce and characterise thin films of alkali tantalates by chemical solution deposition on rigid Si based substrates, at reduced temperatures to be compatible with Si technology, ii) to fulfil scientific knowledge gaps in these relevant functional materials related to their energetics and ii) to exploit alternative applications for alkali tantalates, as photocatalysis. In what concerns the synthesis attention was given to the understanding of the phase formation in potassium tantalate synthesized via distinct routes, to control the crystallization of desired perovskite structure and to avoid low temperature pyrochlore or K-deficient phases. The phase formation process in alkali tantalates is far from being deeply analysed, as in the case of Pb-containing perovskites, therefore the work was initially focused on the process-phase relationship to identify the driving forces responsible to regulate the synthesis. Comparison of phase formation paths in conventional solid-state reaction and sol-gel method was conducted. The structural analyses revealed that intermediate pyrochlore K2Ta2O6 structure is not formed at any stage of the reaction using conventional solid-state reaction. On the other hand in the solution based processes, as alkoxide-based route, the crystallization of the perovskite occurs through the intermediate pyrochlore phase; at low temperatures pyrochlore is dominant and it is transformed to perovskite at >800 °C. The kinetic analysis carried out by using Johnson-MehlAvrami-Kolmogorow model and quantitative X-ray diffraction (XRD) demonstrated that in sol-gel derived powders the crystallization occurs in two stages: i) at early stage of the reaction dominated by primary nucleation, the mechanism is phase-boundary controlled, and ii) at the second stage the low value of Avrami exponent, n ~ 0.3, does not follow any reported category, thus not permitting an easy identification of the mechanism. Then, in collaboration with Prof. Alexandra Navrotsky group from the University of California at Davis (USA), thermodynamic studies were conducted, using high temperature oxide melt solution calorimetry. The enthalpies of formation of three structures: pyrochlore, perovskite and tetragonal tungsten bronze K6Ta10.8O30 (TTB) were calculated. The enthalpies of formation from corresponding oxides, ∆Hfox, for KTaO3, KTa2.2O6 and K6Ta10.8O30 are -203.63 ± 2.84 kJ/mol, - 358.02 ± 3.74 kJ/mol, and -1252.34 ± 10.10 kJ/mol, respectively, whereas from elements, ∆Hfel, for KTaO3, KTa2.2O6 and K6Ta10.8O30 are -1408.96 ± 3.73 kJ/mol, -2790.82 ± 6.06 kJ/mol, and -13393.04 ± 31.15 kJ/mol, respectively. The possible decomposition reactions of K-deficient KTa2.2O6 pyrochlore to KTaO3 perovskite and Ta2O5 (reaction 1) or to TTB K6Ta10.8O30 and Ta2O5 (reaction 2) were proposed, and the enthalpies were calculated to be 308.79 ± 4.41 kJ/mol and 895.79 ± 8.64 kJ/mol for reaction 1 and reaction 2, respectively. The reactions are strongly endothermic, indicating that these decompositions are energetically unfavourable, since it is unlikely that any entropy term could override such a large positive enthalpy. The energetic studies prove that pyrochlore is energetically more stable phase than perovskite at low temperature. Thus, the local order of the amorphous precipitates drives the crystallization into the most favourable structure that is the pyrochlore one with similar local organization; the distance between nearest neighbours in the amorphous or short-range ordered phase is very close to that in pyrochlore. Taking into account the stoichiometric deviation in KTO system, the selection of the most appropriate fabrication / deposition technique in thin films technology is a key issue, especially concerning complex ferroelectric oxides. Chemical solution deposition has been widely reported as a processing method to growth KTO thin films, but classical alkoxide route allows to crystallize perovskite phase at temperatures >800 °C, while the temperature endurance of platinized Si wafers is ~700 °C. Therefore, alternative diol-based routes, with distinct potassium carboxylate precursors, was developed aiming to stabilize the precursor solution, to avoid using toxic solvents and to decrease the crystallization temperature of the perovskite phase. Studies on powders revealed that in the case of KTOac (solution based on potassium acetate), a mixture of perovskite and pyrochlore phases is detected at temperature as low as 450 °C, and gradual transformation into monophasic perovskite structure occurs as temperature increases up to 750 °C, however the desired monophasic KTaO3 perovskite phase is not achieved. In the case of KTOacac (solution with potassium acetylacetonate), a broad peak is detected at temperatures <650 °C, characteristic of amorphous structures, while at higher temperatures diffraction lines from pyrochlore and perovskite phases are visible and a monophasic perovskite KTaO3 is formed at >700 °C. Infrared analysis indicated that the differences are due to a strong deformation of the carbonate-based structures upon heating. A series of thin films of alkali tantalates were spin-coated onto Si-based substrates using diol-based routes. Interestingly, monophasic perovskite KTaO3 films deposited using KTOacac solution were obtained at temperature as low as 650 °C; films were annealed in rapid thermal furnace in oxygen atmosphere for 5 min with heating rate 30 °C/sec. Other compositions of the tantalum based system as LiTaO3 (LTO) and NaTaO3 (NTO), were successfully derived as well, onto Si substrates at 650 °C as well. The ferroelectric character of LTO at room temperature was proved. Some of dielectric properties of KTO could not be measured in parallel capacitor configuration due to either substrate-film or filmelectrode interfaces. Thus, further studies have to be conducted to overcome this issue. Application-oriented studies have also been conducted; two case studies: i) photocatalytic activity of alkali tantalates and niobates for decomposition of pollutant, and ii) bioactivity of alkali tantalate ferroelectric films as functional coatings for bone regeneration. Much attention has been recently paid to develop new type of photocatalytic materials, and tantalum and niobium oxide based compositions have demonstrated to be active photocatalysts for water splitting due to high potential of the conduction bands. Thus, various powders of alkali tantalates and niobates families were tested as catalysts for methylene blue degradation. Results showed promising activities for some of the tested compounds, and KNbO3 is the most active among them, reaching over 50 % degradation of the dye after 7 h under UVA exposure. However further modifications of powders can improve the performance. In the context of bone regeneration, it is important to have platforms that with appropriate stimuli can support the attachment and direct the growth, proliferation and differentiation of the cells. In lieu of this here we exploited an alternative strategy for bone implants or repairs, based on charged mediating signals for bone regeneration. This strategy includes coating metallic 316L-type stainless steel (316L-SST) substrates with charged, functionalized via electrical charging or UV-light irradiation, ferroelectric LiTaO3 layers. It was demonstrated that the formation of surface calcium phosphates and protein adsorption is considerably enhanced for 316L-SST functionalized ferroelectric coatings. Our approach can be viewed as a set of guidelines for the development of platforms electrically functionalized that can stimulate tissue regeneration promoting direct integration of the implant in the host tissue by bone ingrowth and, hence contributing ultimately to reduce implant failure.