The Lena River Delta - inventory of lakes and geomorphological terraces

This data set provides a detailed inventory of lakes in the Lena Delta, northern Siberia, with respect to the lakes' association with one of the three geomorphological main terraces of the Lena Delta. The inventory is based on Landsat-7 ETM+ image data and spatial analysis in a Geographical Information System (GIS). Several morphometric lake attributes were determined from the resulting dataset and statistically analyzed. Significant differences in the morphometric lake characteristics allowed the distinction of a mean lake type for each main terrace. The lake types reflect the special lithological and cryolithological conditions and geomorphological processes prevailing on each terrace. In Morgenstern et al. (2008), special focus was laid on the investigation of lake orientation and the discussion of possible mechanisms for the evolution of the second terrace's oriented lakes.

Chapter 4 A Review of the Availability of and Studies on Spatial Economic Data in Laos

Spatial data are being increasingly used in a wide range of disciplines, a fact that is clearly reflected in the recent trend to add spatial dimensions to the conventional social sciences. Economics is by no means an exception. On one hand, spatial data are indispensable to many branches of economics such as economic geography, new economic geography, or spatial economics. On the other hand, macroeconomic data are becoming available at more and more micro levels, so that academics and analysts take it for granted that they are available not only for an entire country, but also for more detailed levels (e.g. state, province, and even city). The term ‘spatial economics data’ as used in this report refers to any economic data that has spatial information attached. This spatial information can be the coordinates of a location at best or a less precise place name as is used to describe administrative units. Obviously, the latter cannot be used without a map of corresponding administrative units. Maps are therefore indispensible to the analysis of spatial economic data without absolute coordinates. The aim of this report is to review the availability of spatial economic data that pertains specifically to Laos and academic studies conducted on such data up to the present. In regards to the availability of spatial economic data, efforts have been made to identify not only data that has been made available as geographic information systems (GIS) data, but also those with sufficient place labels attached. The rest of the report is organized as follows. Section 2 reviews the maps available for Laos, both in hard copy and editable electronic formats. Section 3 summarizes the spatial economic data available for Laos at the present time, and Section 4 reviews and categorizes the many economic studies utilizing these spatial data. Section 5 give examples of some of the spatial industrial data collected for this research. Section 6 provides a summary of the findings and gives some indication of the direction of the final report due for completion in fiscal 2010.

Efficiency and spatial equity impacts of high-speed rail extensions in urban areas

Urban areas benefit from significant improvements in accessibility when a new high speed rail (HSR) project is built. These improvements, which are due mainly to a rise in efficiency, produce locational advantagesand increase the attractiveness of these cities, thereby possibly enhancing their competitivenessand economic growth. However, there may be equity issues at stake, as the main accessibility benefits are primarily concentrated in urban areas with a HSR station, whereas other locations obtain only limited benefits. HSR extensions may contribute to an increase in spatial imbalance and lead to more polarized patterns of spatial development. Procedures for assessing the spatial impacts of HSR must therefore follow a twofold approach which addresses issues of both efficiency and equity. This analysis can be made by jointly assessing both the magnitude and distribution of the accessibility improvements deriving from a HSR project. This paper describes an assessment methodology for HSR projects which follows this twofold approach. The procedure uses spatial impact analysis techniques and is based on the computation of accessibility indicators, supported by a Geographical Information System (GIS). Efficiency impacts are assessed in terms of the improvements in accessibility resulting from the HSR project, with a focus on major urban areas; and spatial equity implications are derived from changes in the distribution of accessibility values among these urban agglomerations.

Realización de Mapa Estratégico de Ruido de las Carreteras de la Red del Estado (A-3 - zona Campus Sur de la U.P.M.)

En cumplimiento de la Directiva 2002/49/CE en lo referente a carreteras, se han llevado a cabo en España, en el año 2007, los mapas estratégicos de ruido (MER) de los grandes ejes viarios de más de 6 millones de vehículos / año (datos 2006). En esta categoría se encuentra la carretera A-3 a su paso por el Campus Sur de la U.P.M. De acuerdo con el pliego de prescripciones técnicas, estos MER se dividen en fase A o de estudio básico y fase B o de estudio de detalle. En el proyecto denominado “Realización de Mapa Estratégico de Ruido de las carreteras de la Red del Estado (A-3 - Zona Campus sur de la U.P.M.)” se muestran los resultados de información pública de fase A del Mapa Estratégico de Ruido (MER) para la carretera A-3 en la Comunidad de Madrid. Teniendo en cuenta dichos resultados y la no elección del Campus Sur en la fase B (detalle) de dicho MER; en el presente proyecto se realiza el Mapa Estratégico de fase B del Campus Sur de la U.P.M. para el gran ejes viarios (A-3), de cumplimiento de la Directiva 2002/49/CE y siguiendo las indicaciones del pliego de prescripciones técnicas para esta primera fase de entregas de 2007 y utilizando para ello Sistemas de Información Geográfica (SIG). Se justifica, según los resultados obtenidos, si hubiera sido necesaria su inclusión en esta fase de estudio. Una vez establecidas las diferencias entre Mapa Estratégico de Ruido (MER) y Mapa de Ruido (MR), se analizan los diversos criterios técnicos que debe tomar un consultor acústico durante la realización de un MER y cómo estos pueden afectar al resultado final siendo todos ellos válidos pero creando una falta de homogeneidad entre los diferentes MER según el autor del estudio. Se describen las diferentes acciones que se están tomando tras la entrega de 2007 para intentar solucionar este problema de cara a las nuevas entregas. ABSTRACT: The environmental Noise Directive 2002/49/EC has clear requirements to Member States in terms of Strategic Noise Maps according to roads. So, have been carried out in Spain, in 2007, Strategic Noise Maps of the major roads which have more than six million vehicle passages a year (2006 data) where the A-3 road near “Campus Sur U.P.M.” is included. In accord with the statement of technical requirements, these Strategic Noise Maps are divided into A phase (Basic study) and B phase (detailed study). The present project by the name of "Implementation of Strategic Noise Map of Spanish Roads (A-3 – Campus Sur U.P.M. area)" shows the results of Strategic Noise Map for the A-3 in the Community of Madrid (A phase, public information – EGRA project Spanish Ministry of Transport). According to de study results and the not election of “Campus Sur” to B phase (detail), in this project has been made the B phase of Strategic Map in compliance with Directive 2002/49/EC, following the technical requirements specifications for the first phase of deliveries (2007) and using Geographic Information Systems (GIS) to carry on them. Is justified, in accordance with the results, if it was necessary to include “Campus Sur” in this B phase of study. Once established the differences between Strategic Noise Map and Noise Map, the present project examines the technical criteria that must take an acoustic consultant for the realization of a Strategic Map and how these criteria could affect the quality of the final results being all of them valid but it generate a lack of homogeneity between the different Strategic Noise Map by the author of the study. There wasn’t so much experience in Spain in the methodology proposed by the European Noise Directive. The actions that are being taken after delivery of 2007 to try to solve this problem and get harmonized the results among the whole network for the new deliveries each five years are shown at the present project.

Localización óptima de una planta de bioetanol a partir de tubérculos de pataca (Helianthus tuberosus l.) en la Cuenca del Duero

El objetivo del presente trabajo es determinar la localización óptima de una planta de producción de 30.000 m3/año de bioetanol a partir de tubérculos de pataca (Helianthus tuberosus L.) cultivada en regadío, en tierras de barbecho de la Cuenca Hidrográfica del Duero (CH Duero). Inicialmente se elaboró, a partir de datos bibliográficos, un modelo de producción de pataca en base a una ecuación de regresión que relaciona datos experimentales de rendimientos de variedades tardías con variables agroclimáticas. Así se obtuvo una función de producción basada en la cantidad de agua disponible (precipitación efectiva + dosis de riego) y en la radiación global acumulada en el periodo brotación‐senescencia del cultivo. A continuación se estima la superficie potencial de cultivo de pataca en la CH Duero a partir de la superficie arable en regadío cartografiada por el Sistema de Ocupación del Suelo (SIOSE), a la cual se le aplican, en base a los requerimientos del cultivo, unas restricciones climáticas, edafológicas, topográficas y logísticas mediante el uso de Sistemas de Información Geográfica (SIG). La proporción de superficie de regadío restringida se cuantifica a escala municipal con el fin de calcular la superficie de barbecho en regadío apta para el cultivo de pataca. A partir de las bases de datos georreferenciadas de precipitación, radiación global, y la dotación de agua para el riego de cultivos no específicos establecida en el Plan Hidrológico de la Cuenca del Duero a escala comarcal, se estimó la producción potencial de tubérculos de pataca sobre la superficie de barbecho de regadío según el modelo de producción elaborado. Así, en las 53.360 ha de barbecho en regadío aptas para el cultivo de pataca se podrían producir 3,8 Mt de tubérculos al año (80 % de humedad) (761.156 t ms/año) de los que se podría obtener 304.462 m3/año de bioetanol, considerando un rendimiento en la transformación de 12,5 kg mf/l de etanol. Se estiman los costes de las labores de cultivo de pataca así como los costes de la logística de suministro a una planta de transformación considerando una distancia media de transporte de 25 km, en base a las hojas de cálculo de utilización de aperos y maquinaria agrícola oficiales del Ministerio de Agricultura, Alimentación y Medio Ambiente (MAGRAMA). Considerando el balance de costes asociados a la producción de bioetanol (costes de transformación, distribución y transporte del producto, costes estructurales de la planta, ahorro de costes por la utilización de las vinazas generadas en el proceso como fertilizante y un beneficio industrial), se ha estimado que el coste de producción de bioetanol a partir de tubérculos de pataca asciende a 61,03 c€/l. Se calculan los beneficios fiscales para el Estado por el cultivo de 5.522 ha de pataca que suministren la materia prima necesaria para una planta de bioetanol de 30.000 m3/año, en concepto de cotizaciones a la Seguridad Social de los trabajadores, impuestos sobre el valor añadido de los productos consumidos, impuesto sobre sociedades y ahorro de las prestaciones por desempleo. Se obtuvieron unos beneficios fiscales de 10,25 c€ por litro de bioetanol producido. El coste de producción de bioetanol depende del rendimiento de tubérculos por hectárea y de la distancia de transporte desde las zonas de producción de la materia prima hasta la planta. Se calculó la distancia máxima de transporte para que el precio de coste del bioetanol producido sea competitivo con el precio de mercado del bioetanol. Como resultado se determinó que el precio del bioetanol (incluido un beneficio industrial del 15%) de la planta sería igual o inferior al precio de venta en el mercado (66,35 c€/l) con una distancia máxima de transporte de 25 km y un rendimiento mínimo del cultivo de 60,1 t mf/ha. Una vez conocido el área de influencia de la planta según la distancia de transporte máxima, se determinó la localización óptima de la planta de producción de bioetanol mediante un proceso de ubicación‐asignación realizado con SIG. Para ello se analizan los puntos candidatos a la ubicación de la planta según el cumplimiento de unos requerimientos técnicos establecidos (distancia a fuentes de suministro eléctrico y de recursos hídricos, distancia a estaciones de ferrocarril, distancia a núcleos urbanos y existencia de Espacios Naturales Protegidos) que minimizan la distancia de transporte maximizando la cantidad de biomasa disponible según la producción potencial estimada anteriormente. Por último, la superficie destinada al cultivo de pataca en el área de influencia de la planta se determina en base a un patrón de distribución del cultivo alrededor de una agroindustria. Dicho patrón se ha obtenido a partir del análisis del grado de ocupación del cultivo de la remolacha en función de la distancia de transporte a la planta azucarera de Miranda de Ebro (Burgos). El patrón resultante muestra que la relación entre el grado de ocupación del suelo por el cultivo y la distancia de transporte a la planta siguen una ecuación logística. La localización óptima que se ha obtenido mediante la metodología descrita se ubica en el municipio leonés de El Burgo Ranero, donde la producción potencial de tubérculos de pataca en la superficie de barbecho situada en un radio de acción de 25 km es de 375.665 t mf/año, superando las 375.000 t mf requeridas anualmente por la planta de bioetanol. ABSTRACT Jerusalem artichoke (Helianthus tuberosus L.) is a harsh crop with a high potential for biomass production. Its main use is related to bioethanol production from the carbohydrates, inulin mainly, accumulated in its tubers at the end of the crop cycle. The aerial biomass could be used as solid biofuel to provide energy to the bioethanol production process. Therefore, Jerusalem artichoke is a promising crop as feedstock for biofuel production in order to achieve the biofuels consumption objectives established by the Government of Spain (PER 2011‐2020 and RDL 4/2013) and the European Union (Directive 2009/28/EC). This work aims at the determination of the optimal location for a 30,000 m3/year bioethanol production plant from Jerusalem artichoke tubers in the Duero river basin. With this purpose, a crop production model was developed by means of a regression equation that relates experimental yield data of late Jerusalem artichoke varieties with pedo‐climatic parameters from a bibliographic data matrix. The resulting crop production model was based on the crop water availability (including effective rainfall and irrigation water supplied) and on global radiation accumulated in the crop emergence‐senescence period. The crop potential cultivation area for Jerusalem artichoke in the Duero basin was estimated using the georeferenced irrigated arable land from the “Sistema de Ocupación del Suelo” (SIOSE) of Spain. Climatic, soil, slope and logistic restrictions were considered by means of Geographic Information Systems (GIS). The limited potential growing area was then applied to a municipality scale in order to calculate the amount of fallow land suitable for Jerusalem artichoke production. Rainfall and global radiation georeferenced layers as well as data of irrigation water supply for crop production (established within the Duero Hydrologic Plan) were use to estimate the potential production of Jerusalem artichoke tubers in the suitable fallow land according to the crop production model. As a result of this estimation, there are 53,360 ha of fallow land suitable for Jerusalem artichoke production in the Duero basin, where 3.8 M t fm/year could be produced. Considering a bioethanol processing yield of 12.5 kg mf per liter of bioethanol, the above mentioned tuber potential production could be processed in 304,462 m3/year of bioethanol. The Jerusalem crop production costs and the logistic supply costs (considering an average transport distance of 25 km) were estimated according to official agricultural machinery cost calculation sheets of the Minister of Agriculture of Spain (MAGRAMA). The bioethanol production cost from Jerusalem artichoke tubers was calculated considering bioethanol processing, transport and structural costs, industrial profits as well as plant cost savings from the use of vinasses as fertilizer. The resulting bioetanol production cost from Jerusalem artichoke tubers was 61.03 c€/l. Additionally, revenues for the state coffers regarding Social Security contributions, added value taxes of consumed raw materials, corporation tax and unemployment benefit savings due to the cultivation of 5,522 ha of Jerusalem artichoke for the 30.000 m3/year bioethanol plant supply were calculated. The calculated revenues amounted to 10.25 c€/l. Bioethanol production cost and consequently the bioethanol plant economic viability are strongly related to the crop yield as well as to road transport distance from feedstock production areas to the processing plant. The previously estimated bioethanol production cost was compared to the bioethanol market price in order to determine the maximum supply transport distance and the minimum crop yield to reach the bioethanol plant economic viability. The results showed that the proposed plant would be economically viable at a maximum transport distance of 25 km and at a crop yield not less than 60.1 t fm/ha. By means of a GIS location‐allocation analysis, the optimal bioethanol plant location was determined. Suitable candidates were detected according to several plant technical requirements (distance to power and water supply sources, distance to freight station, and distance to urban areas and to Natural Protected Areas). The optimal bioethanol plant location must minimize the supply transport distance whereas it maximizes the amount of available biomass according to the previously estimated biomass potential production. Lastly, the agricultural area around the bioethanol plant finally dedicated to Jerusalem artichoke cultivation was planned according to a crop distribution model. The crop distribution model was established from the analysis of the relation between the sugar beet (Beta vulgaris L.) cropping area and the road transport distance from the sugar processing plant of Miranda de Ebro (Burgos, North of Spain). The optimal location was situated in the municipality of ‘El Burgo Ranero’ in the province of León. The potential production of Jerusalem artichoke tubers in the fallow land within 25 km distance from the plant location was 375,665 t fm/year, which exceeds the amount of biomass yearly required by the bioethanol plant.

Mapping Genetic Diversity of Cherimoya (Annona cherimola Mill.): Application of Spatial Analysis for Conservation and Use of Plant Genetic Resources.

There is a growing call for inventories that evaluate geographic patterns in diversity of plant genetic resources maintained on farm and in species' natural populations in order to enhance their use and conservation. Such evaluations are relevant for useful tropical and subtropical tree species, as many of these species are still undomesticated, or in incipient stages of domestication and local populations can offer yet-unknown traits of high value to further domestication. For many outcrossing species, such as most trees, inbreeding depression can be an issue, and genetic diversity is important to sustain local production. Diversity is also crucial for species to adapt to environmental changes. This paper explores the possibilities of incorporating molecular marker data into Geographic Information Systems (GIS) to allow visualization and better understanding of spatial patterns of genetic diversity as a key input to optimize conservation and use of plant genetic resources, based on a case study of cherimoya (Annona cherimola Mill.), a Neotropical fruit tree species. We present spatial analyses to (1) improve the understanding of spatial distribution of genetic diversity of cherimoya natural stands and cultivated trees in Ecuador, Bolivia and Peru based on microsatellite molecular markers (SSRs); and (2) formulate optimal conservation strategies by revealing priority areas for in situ conservation, and identifying existing diversity gaps in ex situ collections. We found high levels of allelic richness, locally common alleles and expected heterozygosity in cherimoya's putative centre of origin, southern Ecuador and northern Peru, whereas levels of diversity in southern Peru and especially in Bolivia were significantly lower. The application of GIS on a large microsatellite dataset allows a more detailed prioritization of areas for in situ conservation and targeted collection across the Andean distribution range of cherimoya than previous studies could do, i.e. at province and department level in Ecuador and Peru, respectively.

Mejora de la movilidad urbana sostenible en el municipio de Madrid : aplicación del análisis geoespacial en la ampliación de la red de suministro de combustibles alternativos.

Este Trabajo Fin de Grado trata de dar respuesta a un problema de movilidad sostenible en el municipio de Madrid. Mediante las herramientas de análisis geoespacial de los Sistemas de Información Geográfica (SIG) se buscan soluciones para la ampliación de la red de estaciones de suministro de combustibles alternativos como el Gas Licuado de Petróleo (GLP), Gas Natural Comprimido (GNC) y electricidad. Los resultados obtenidos determinan las posibles ubicaciones de los nuevos puntos atendiendo a criterios específicos según el tipo de combustible. Estas soluciones procuran que se alcancen las medidas impuestas por las directivas europeas en la materia de las Smart Cities. Además, con este Trabajo se muestran las capacidades de gestión de los SIG en el ámbito urbano y sus posibles aplicaciones. ABSTRACT: This Final Project answers the problem of sustainable mobility in the city of Madrid. By means of geospatial analysis tools of Geographic Information Systems (GIS) solutions are searched to extend the supply stations network for alternative fuels like Liquefied Petroleum Gas (LPG), Compressed Natural Gas (CNG) and electricity. The final results are the best possible locations of new items according to specific criteria depending on the type of fuel. These solutions seek to the measures imposed by the European directives are reached in the field of Smart Cities. In addition, This Final Project shows management capabilities of GIS in urban areas and their possible application.

Fragmentação florestal e prioridades para a conservação da biodiversidade

Um modelo dedicado ao planejamento da conservação e restauração de habitats deve incluir informações estratégicas para assegurar a eficácia e de fácil obtenção, para assegurar a agilidade necessária. Planos e estratégias para conservação usualmente são complexos e demandam informações detalhadas, difíceis de se obter, como inventários biológicos e certos tipos de mapeamento, o que traz limitações em termos de disponibilidade, qualidade e custo das informações. Assim, procurou-se testar a eficiência de métodos simples para a seleção, em escala local, de áreas prioritárias para conservação de habitats fortemente fragmentados e reduzidos, uma situação comum no sul do Brasil, usando dados de imagens LANDSAT e planos de informações disponíveis em mapeamentos comuns, e trabalho de campo. Inicialmente analisou-se a estrutura da paisagem e o padrão de fragmentação em parte da região norte do estado do Paraná, e testar se tamanho e forma são adequados para selecionar os fragmentos florestais mais importantes para a conservação, ou seja, as que contribuem para manter maior quantidade e melhor qualidade de habitats, bem como tenham maior impacto (positivo) na conectividade e em outras variáveis da paisagem. Os resultados mostram que a floresta madura cobre cerca de 3% da paisagem, e a cobertura florestal total atinge perto de 8%, consistindo principalmente de pequenos fragmentos (82% tem entre 1 e 10 ha). Fragmentos grandes (>100 ha) são apenas 1,4% dos remanescentes, mas somam 34% da área de floresta. Apesar de estarem sujeitos a efeitos de borda em toda ou quase toda a sua área, fragmentos pequenos mostraram ter um papel importante na conectividade da paisagem. Numa área maior, foi feita uma pré-seleção de áreas com potencial para estabelecimento de redes de conservação. A pré-seleção procurou responder às seguintes perguntas: 1-Quais são os sítios com maior potencial para a conservação da biodiversidade? 2-Quais são os sítios sob maior risco para objetivos de conservação? e 3-Quais sítios têm melhores oportunidades para o estabelecimento de zonas de conservação de uso múltiplo? Foi identificado um conjunto de 11 fragmentos pertencendo a 5 sub-regiões, sofrendo variados graus de pressão antrópica. Adicionalmente, usando medidas simples de estrutura da paisagem, relacionadas com tamanho, forma e conectividade dos fragmentos, procurou-se identificar tipos estruturais de fragmentos, como uma forma alternativa para auxiliar o estabelecimento de prioridades para conservação a partir do seu papel, efetivo ou potencial, na paisagem. Foram identificados 5 tipos de fragmentos, pequenos (ilhotas isoladas, trampolins), médios (núcleos auxiliares e corredores) e grandes (núcleos principais), que podem ser usados para subsidiar estratégias de conservação. Utilizando informações sobre a estrutura da paisagem, hidrografia e legislação ambiental, propõe-se aqui uma estratégia de conservação para o complexo das bacias dos ribeirões Apertados-Três Bocas (CATB), ordenando atividades de restauração e conservação de fragmentos florestais, criação e expansão de unidades de conservação, além da proposição de formas de uso do solo compatíveis com o entorno de unidades de conservação.

Estudo prospectivo visando o uso de sistemas agroflorestais no município de São Carlos, SP

A crescente demanda por recursos naturais e a conseqüente perda de qualidade e quantidade dos mesmos, indica a necessidade do desenvolvimento de alternativas, nas diversas áreas do conhecimento e das atividades humanas. No caso dos agroecossistemas, as práticas convencionais provocaram ao longo do tempo a degradação do solo e dos recursos hídricos, a perda da biodiversidade e a desestruturação dos ecossistemas, que culminaram em desequilíbrios globais de balanço hídrico e temperatura. O presente estudo visa analisar o potencial de utilização de Sistemas Agroflorestais (SAFs). SAFs são práticas de manejo da terra há muito tempo conhecidas, que associam, deliberadamente, árvores com culturas agrícolas temporárias, permanentes e/ou animais simultaneamente ou sucedendo-se temporalmente no espaço; obtendo os benefícios de proteção ambiental e de produção proporcionados pelas árvores. Para a realização do estudo foram utilizadas as bases cartográficas digitalizadas das características ambientais (solo, topografia, hidrologia e clima) do município e as mesmas foram sobrepostas através do Sistema de Informação Geográfica (SIG). As características ambientais de São Carlos, indicam a necessidade da adoção de sistemas de produção sustentáveis, capazes de conservar a qualidade e a quantidade do solo e dos recursos hídricos disponíveis, bem como sua biodiversidade, por isso apresenta grande aptidão para a utilização dos SAFs e uma ampla variedade de espécies com potencial de uso. A prioridade de adoção de SAFs é para áreas degradadas e subutilizadas, áreas de preservação ambiental e adjacentes, reservas legais e áreas suscetíveis à erosão. Sugere-se novos estudos, em campo, para comprovação dos resultados teóricos obtidos.

A model driven framework for geographic knowledge discovery

Geographic knowledge discovery (GKD) is the process of extracting information and knowledge from massive georeferenced databases. Usually the process is accomplished by two different systems, the Geographic Information Systems (GIS) and the data mining engines. However, the development of those systems is a complex task due to it does not follow a systematic, integrated and standard methodology. To overcome these pitfalls, in this paper, we propose a modeling framework that addresses the development of the different parts of a multilayer GKD process. The main advantages of our framework are that: (i) it reduces the design effort, (ii) it improves quality systems obtained, (iii) it is independent of platforms, (iv) it facilitates the use of data mining techniques on geo-referenced data, and finally, (v) it ameliorates the communication between different users.

Plan de restauración y conservación del humedal urbano de Calpe, Alicante (SE España)

Este estudio pretende profundizar en el conocimiento sobre el funcionamiento de pequeños humedales mediterráneos, en estado de degradación, que, por razones históricas y socioeconómicas, han quedado confinados en un espacio urbano, olvidando la importancia ambiental de estas anomalías hídricas positivas en espacios sometidos a déficit hídrico. Este tipo de humedales, como el de Calpe (Alicante), suelen localizarse en áreas costeras de alta densidad urbana, lo que supone un importante valor añadido desde la ordenación y gestión territorial, ya que contribuyen a mantener la conectividad ambiental a una escala mucho más amplia, funcionando como auténticos reservorios de biodiversidad. Así, se ha llevado a cabo una aproximación holística, analizando el estado actual de la lámina de agua y del espacio circundante, donde se han incluido parámetros del medio físico, del medio biótico y los usos del suelo. Para ello se han combinado técnicas de muestreo de campo con el uso de GPS y sistemas de información geográfica (SIG). Una vez detectadas las amenazas, y estudiado el potencial ecológico del humedal, se ha desarrollado un plan de restauración y conservación de la zona con la pretensión de implicar a la población local para devolver a este espacio el protagonismo que merece. En definitiva, se pretende proporcionar las herramientas teóricas y técnicas necesarias para garantizar la conservación y gestión sostenible de los humedales costeros urbanos y sus recursos naturales.

Los SIG en el contexto del medio marino en la Región de Murcia

La aplicación de los Sistemas de Información Geográfica (SIG) se ha extendido en el mundo científico-técnico, donde se ha convertido en un instrumento de análisis y almacenamiento de información imprescindible. El uso de los SIG abarca casi cualquier aplicación en la que haya una componente espacial, como usos militares, aplicaciones en infraestructuras, planificación territorial, etc. En el medio marino se pueden aplicar para teledetección, cartografía digital, geoestadística, análisis y modelación espacial, Infraestructuras de Datos Espaciales (IDE), visores web, etc. En 1988, la Región de Murcia impulsó el proyecto de cartografía binómica del litoral murciano, siendo un instrumento que ha ido actualizándose hasta nuestros días. En comparación con otras regiones mediterráneas españolas, el litoral murciano es el tramo del litoral mediterráneo con la información cartográfica más completa y precisa, además del SIG marino más avanzado. Son numerosos los trabajos y aplicaciones en los que se ha utilizado como base la cartografía y los datos asociados, como la Red Natura 2000, ‘Programa de gestión integrada del litoral del Mar Menor y su zona de influencia’, caracterización ambiental para la propuesta de Reservas Marinas, diagnóstico medioambiental, etc.

Evolution of thermokarst in East Siberian ice-rich permafrost

Thermokarst lakes and basins are major components of ice-rich permafrost landscapes in East Siberian coastal lowlands and are regarded as indicators of regional climatic changes. We investigate the temporal and spatial dynamics of a 7.5 km**2, partly drained thermokarst basin (alas) using field investigations, remote sensing, Geographic Information Systems (GIS), and sediment analyses. The evolution of the thermokarst basin proceeded in two phases. The first phase started at the Pleistocene/Holocene transition (13 to 12 ka BP) with the initiation of a primary thermokarst lake on the Ice Complex surface. The lake expanded and persisted throughout the early Holocene before it drained abruptly about 5.7 ka BP, thereby creating a > 20 m deep alas with residual lakes. The second phase (5.7 ka BP to present) is characterized by alternating stages of lower and higher thermokarst intensity within the alas that were mainly controlled by local hydrological and relief conditions and accompanied by permafrost aggradation and degradation. It included diverse concurrent processes like lake expansion and stepwise drainage, polygonal ice-wedge growth, and the formation of drainage channels and a pingo, which occurred in different parts of the alas. This more dynamic thermokarst evolution resulted in a complex modern thermokarst landscape. However, on the regional scale, the changes during the second evolutionary phase after drainage of the initial thermokarst lakes were less intense than the early Holocene extensive thermokarst development in East Siberian coastal lowlands as a result of a significant regional change to warmer and wetter climate conditions.

Public Land for Affordable Housing: An Evaluation of a HALA Proposal in Seattle

Thesis (Master's)--University of Washington, 2016-06

Simulation modelling applied to runoff modelling using mapscript

Dynamic spatial analysis addresses computational aspects of space–time processing. This paper describes the development of a spatial analysis tool and modelling framework that together offer a solution for simulating landscape processes. A better approach to integrating landscape spatial analysis with Geographical Information Systems is advocated in this paper. Enhancements include special spatial operators and map algebra language constructs to handle dispersal and advective flows over landscape surfaces. These functional components to landscape modelling are developed in a modular way and are linked together in a modelling framework that performs dynamic simulation. The concepts and modelling framework are demonstrated using a hydrological modelling example. The approach provides a modelling environment for scientists and land resource managers to write and to visualize spatial process models with ease.