Some biological aspects of the weed Lesser celandine (Ranunculus ficaria)

Lesser celandine (Ranunculaceae) is a perennial weed with tuberous root. Tubers are the most important means of reproduction and dispersion of this weed. In recent years, it has spread into wheat fields in Western Iran, mainly in the Lorestan province. A series of experiments were conducted to determine cardinal temperatures and to study the effects of pre-chilling, temperature fluctuations, tuber size, freezing and drying on germination of the tubers, as well as the effect of planting depth on sprouting of the tubers. The results obtained showed that the highest percentage of germination occurred when tubers were stored for more than 2 weeks at 4 or 8 ºC. The optimum temperature for germination differed in large and small tubers (8 and 14oC, respectively). Germination was the highest (almost 100%) at temperature fluctuations of 5-10oC. Germination of the finger-like and small tubers was the highest (95%); however, very small, small, and broken tubers showed the lowest germination percentage. In the freezing experiment, decreasing the temperature and increasing the storage duration decreased the germination of tubers. Increasing the osmotic potential and temperature resulted in decreased tuber germination of Lesser celandine. Lesser celandine could sprout down to 20 cm depth but heat demand for tubers from superficial depth was smaller than for tubers planted at greater depth.

Corn and soybean yields as affected by cover crops and herbicide timing under no-tillage system

To achieve better results in the no-tillage system (NTS), it is important to properly manage the cover crop prior to planting by using herbicides, usually glyphosate. The effect of glyphosate on plant coverage is slow, and plants take a few days to die completely. Thus, when applying the herbicide on the same day of planting soybean or corn, cover crops are still alive and standing, causing initial shading on seedlings of the crop and delaying its establishment. Therefore, this study aimed to evaluate the effect of distinct cover crops and their timing of desiccation prior to planting soybean or corn, on crop yield and yield components. Two experiments were installed, one for soybean and another for corn. Each experiment consisted in combining three cover crops (Brachiaria brizantha, common bean or millet) chemically desiccated at two timings before planting the crop (15 or 0 days before planting) under no-tillage system (NTS). Experiments were installed in a completely randomized block design with five replications. Brachiaria brizantha produced the highest amount of biomass; common bean and millet as cover crops allowed higher soybean grain yields; herbicide application under common bean, millet and Brachiaria brizantha 15 days before planting soybean allowed higher crop grain yields; desiccation timing of common bean did not affect corn grain yield; Brachiaria brizantha should be desiccated 15 days before planting corn to allow maximum grain yield; when millet was used as a cover crop, glyphosate application at planting of corn allowed the highest grain yield.

Occurrence of weed species in Jatropha curcas intercropping systems

This study aimed to evaluate the level of infestation by weed species in a consolidated Jatropha plantation, as a function of the plant species grown in interrows. The experiment was installed in 2006 at the district of Itahum, city of Dourados, state of Mato Grosso do Sul, Brazil, made possible through a partnership between Embrapa Western Agriculture and Paraiso Farm. Treatments consisted of (1) Jatropha in monocrop, with no plant at the interrrows; or the following plants cultivaded at the interrows of Jatropha: (2) Stylosanthes spp.; (3) Brachiaria ruziziensis; (4) Brachiaria ruziziensis + Stylosanthess pp.; (5) Brachiaria humidicola; (6) Panicum maximum cv. massai; (7) Cajanus cajan cv. anão; (8) Crotalaria spectabilis; (9) Crop rotation system 1 - (maize second crop -Crambe abyssinica - soybean - peanut); and (10) Crop rotation system 2 - (cowpea - radish - maize - cowpea) conducted for two years. Phytosociological characterization of weed species was accomplished in 2011 based on the Ecological Approach. Estimations of relative abundance, frequency, dominance and Importance Value Index were obtained. Areas were also characterized by the diversity coefficients of Simpson and modified Shannon-Weiner, and then grouped by cluster analysis. Areas with low soil coverage resulted in higher infestation levels; crop rotation in the interrows of Jatropha produced a significant reduction in weed infestation, but the lowest infestation levels were observed when grasses were grown intercropped with Jatropha. Lower diversity coefficients were associated with occurrence of the most troublesome weed species. In the first years after planting Jatropha, species of Brachiaria or a crop rotation involving species with high mulching ability and whose biomass exhibit a high C:N ratio, should be established in the interrows to avoid problems with weeds infestation.

Infestation of weed species in monocrop coffee or intercropped with banana, under agroecological system

We aimed with this study to compare weed infestation in coffee under two different cropping managements: conventional coffee grown alone, or intercropped with banana plantation in a year-round basis (late spring, late summer, late fall and late winter). The experiment was installed in 2009 under field conditions at the Escola Municipal Rural Benedita Figueiró de Oliveira, in the city of Ivinhema in the state of Mato Grosso do Sul, Brazil. Assessments of weed occurrence were made three years after employment, on both cropping systems, and density, frequency, dominance and the importance value for each plant species in each system and season were quantified. Plant diversity within each system was estimated by Simpson and Shannon-Weiner indexes. Similarity between cropping systems were also assessed by the binary asymmetric similarity coefficient of Jaccard. Absolute infestation and spontaneous species differed between the two cropping systems in all seasons. Overall species diversity is higher in the monocrop compared with the intercrop, and it is associated in this study with the higher incidence of troublesome species. Areas were similar in terms of weed composition only in the Fall. Shading provided by the banana trees shows to be an efficient culture management aiming to suppress weeds in agro-ecological planting systems.

Assessing the Competitive Ability of Rhynchosia capitata; an Emerging Summer Weed in Asia

Rhynchosia capitata is a newly emerging threatening weed of summer crops in many Asian countries. We conducted 2-yr experiments to evaluate R. capitata competition with mungbean under irrigated conditions. Rhynchosia capitata was allowed to compete with mungbean for 0, 3, 4, 5, 6, 7 weeks after planting and for full crop season. The competitive ability of R. capitata was assessed by measuring its dry weight, micro and macro nutrient contents and uptake; and its effects on mungbean growth and yield parameters. The results showed that full season weed competition produced highest dry weight of R. capitata and its macro and micronutrient contents and uptake. Yield and yield components of mungbean decreased in a linear fashion with increase in competition period of Rhynchosia capitata. Full season competition of R. capitata reduced the seed yield of mungbean by 49% and 46% during 2011 and 2012 respectively. In conclusion, damaging effect of R. capitata intrusion on mungbean yield is associated with duration of its presence in crop, accumulation of dry matter and the nutrient uptake by R. capitata, which otherwise should be available to crop.

Selection of Grids for Weed Mapping

This study aimed to assess the degree of similarity presented by thematic maps generated by different sampling grids of weed plants in a commercial agricultural area of 7.95 hectares. Monocotyledons and dicotyledons were counted on the 2012/2013 and 2013/2014 harvests, before soybean planting, in the fallow period after wheat harvest, in both years. A regular grid of 10 x 10 m was produced to sample the invasive plants, used as reference, and the counting was done in 1 m² of each sample point, totaling 795 samples in each year, compared to regular grids of 30 and 50 m, generated from the data exclusion of the standard grid. Twenty-two composite soil samples were taken at a depth of 0-20 cm to correlate soil properties with weeds occurrence. For the generation of the thematic maps, the Inverse Distance Weighting (IDW) for interpolation was used; when comparing the maps generated from each grid with the reference map, the kappa coefficient was used to assess the loss of quality of the maps as the number of sample points was reduced. It was observed that the map quality loss was lower in 2013 compared to 2012 when the sampling density of the points was reduced. The 30 x 30 m grids have satisfactorily described the infestation data of the dicotyledons and the 50 x 50 m grids have adequately described the monocotyledon weeds infestation, compared to the standard 10 x 10 m grids.

INTERCROPPING CORN WITH A COMBINATION OF TREE SPECIES TO CONTROL WEEDS

ABSTRACT The combination of crop residues or crop extracts is often more advantageous in controlling weeds, than the application of each residue or extract singly. This suggests that in intercropping with maize, the combination of tree species can be more advantageous than species isolated in weed control. The objective of this study was to evaluate the effects of intercropping with a combination of leguminous on the weed growth and corn yield. A randomized-block design with split plots (cultivars in plots) and five replicates was established. The cultivars BR 205 and AG 1041 were subject to the following treatments: two weedings (A), intercropping with sabiá (B), gliricidia (C), gliricidia + sabiá (D) and no weeding (E). In the B and C, 30 viable seeds m-2 of the leguminous were sown. In the D, 15 seeds of each species were sown m-2. The legumes were sown by random casting during corn planting. The sequence of the best treatments in reducing the growth of weeds is A > B = C = D = E. The sequence of the best treatments when are considered the yields of baby corn, green corn and grain is A > B > C > D > E. The cultivars do not differ in regards to the reduction in weed growth. In terms of corn yield cultivar BR 205 is the best.

Weed Community in a Raw Sugarcane Renovation Area Submitted to Different Soil Managements

The objective of this study was to evaluate the weed community in a raw sugarcane renovation area with three soil managements and peanut sowing in succession. The experiment was conducted during the 2007/08 season on a raw sugarcane area harvested without prior burning in the last five cuts. A randomized block design with treatments arranged in a split plot and arranged in four replications was used. The main treatments consisted of three cropping systems: conventional tillage, minimum tillage and direct planting, and subplots consisted in the absence (resting) or presence of crop rotation with peanuts. After 135 days from planting peanuts and 180 days of sugarcane harvest, the number of weeds m-2 was counted and the shoot dry biomass of the weeds collected was determined. The data were interpreted by analysis of variance and the means were compared by Tukey's test at 5% probability so that phytosociological indices a, b, c e d were calculated. The use of soil conservation tillage and peanut in rotation with sugarcane in the renovation areas is effective in controlling weeds and suppression of weed species difficult to control like Cyperus rotundus, Commelina bengalensis, Urochloa plantaginea, and Digitaria nuda.

Nós e as plantas: ontem e hoje

Áreas verdes, ruas e praças arborizadas em locais urbanos são características que apenas recentemente adquiriram relevância no mundo ocidental. Parece que os habitantes antigos das cidades não valorizavam uma estreita proximidade com plantas. Neste artigo, sugere-se que isso é uma conseqüência de uma ruptura entre o homem e a natureza, que ocorreu na emergência da tradição judaico-cristã na história da civilização ocidental. A ausência de laços entre natureza e cristianismo é evidente na ausência de árvores, jardins e outros aspectos representativos da natureza em torno de templos cristãos. O cristianismo também representou o fim da mitologia, um processo que conduziu ao desenvolvimento do pensamento racional, favorecendo assim o desenvolvimento da ciência. Por seu turno, as conquistas científicas dos séculos 17 e 18 reforçaram a confiança na superioridade do ser humano e fortaleceram o suposto direito do homem, baseado em fundamentos religiosos, de domínio sobre a natureza. A sobrevalorização dos conhecimentos derivados da ciência e do mundo civilizado e a negação dos valores dos povos selvagens conquistados levaram à extinção das tradições e línguas de muitas nações nativas. Uma ressurgência dos valores ligados à natureza no mundo civilizado ocidental ocorreu apenas com o Movimento Romântico do século 19, ainda restrito à elite. Uma forte valorização dos componentes naturais veio no século 20, especialmente em suas últimas décadas, com o Movimento Ambientalista. Mas a antiga noção de que a natureza existe para servir ao homem ainda prevalece em muitos setores da sociedade. Defende-se aqui o ponto de vista de que é necessário recorrer-se a itens éticos e morais para defender e preservar a natureza. Especial ênfase é dada ao argumento de que uma importante contribuição ao Movimento Ambientalista Mundial seria a união de todas as religiões, assumindo como uma de suas prioridades a proteção da natureza e dos seres silvestres, uma vez que itens ligados à ética e à moral são melhor absorvidos pela mente humana quando administrados por via religiosa.

Nectar and pollen production in pumpkin (Cucurbita pepo L.)

Cucurbitaceae species depend on pollination by honey bees for fruit production. The overall objective of this work was to evaluate the potential of C. pepo for pollen and nectar production, that could help maintain colonies placed in the field. Plants of pumpkin were cultivated in field, in 1996 and 1997. Before anthesis, male flowers were covered to prevent visits by bees and other insects. After anthesis the flowers were uncovered and the following parameters were evaluated: 1) nectar production; 2) total sugar concentration in the nectar; 3) nectar replacement; and 4) production of pollen and flowers during the crop cycle. Nectar production varied from 18 to 79 µL flower-1 and increased progressively from 7h to 13h. The sugar concentration, measured at 7h, 9h and 11h, did not vary, averaging 50.5% ± 0.5% in 1996 and 40.5% ± 0.6% in 1997. At 13h the concentration decreased to 42% in 1996 and to 35% in 1997. Total daily nectar production was not influenced by removing nectar several times per day, indicating that nectar secretion is not stimulated or inhibited by frequent removal. The number of pollen grains did not differ in the two years, with an average of 43,669 ± 1,382 grains per flower. The peak rate of male and female flowers occurred from 60 to 66 days after planting (DAP) with 34.6 male flowers and 2.2 female flowers per plant, respectively. Cucurbita pepo has a potential for honey and pollen production of about 105 and 160 kg per hectare per season, respectively, which is enough to sustain, at least, five honeybee colonies.

Diallel cross analysis for young plants of brachytic maize (Zea mays L.) varieties

Six brachytic maize varieties were crossed in a diallel mating scheme. Both varieties and crosses were grown hydroponically in a greenhouse, in randomized complete blocks with three replications in two seasons. Four brachytic double cross hybrids were used as checks. Twenty-eight days after planting, data for eight traits were taken for weights of the total plant (TPW), top plant (TOW), total roots (TRW), seminal roots (SRW), and nodal roots (NRW) and number of total roots (TRN), seminal roots (SRN), and nodal roots (NRN). Ten plants were measured in each plot and all the analyses were accomplished with plot means. In the diallel cross the top plant contributed 57.6% of the total plant weight, for seminal roots 15.4%, and for nodal roots 27.0%. Root number distribution was 36.7% seminal roots and 63.3% nodal roots. Approximately the same ratios were observed in the checks. The average heterosis effects were nonsignificant for all traits; the other components of heterosis (variety and specific heterosis) also were not important sources of variation in young plants. The overall results suggest that nonadditive gene action is not an important source of variation for the plant and root system of young plants. The positive correlation coefficients for combinations of traits indicated that they are under the control of a polygenic system

Energiapuun kastelu jätetäytön suotovedellä tuhkasta ja kompostista valmistetussa kasvualustassa

Tässä työssä tutkitaan suotoveden käsittelyä käyttämällä sitä kierrätysmateriaaleista valmistetussa tuhkamullassa loppusijoitusalueen päällä kasvatettavan energiapuukasvuston kasteluun. Kyseisen toimintamallin tarkoituksena on haihduttaa suotovettä energiapuiden avulla sekä sitouttaa ravinteita ja haitta-aineita sekä kasvustoon että kasvualustaan. Tavoitteena on selvittää toimintamallin hyödyntämiskelpoisuus ja tehokkuus suotovesien käsittelymenetelmänä sekä kastelun vaikutukset energiapuun kasvuun. Työssä suoritettiin kesän ja syksyn 2014 aikana energiapuun kastelukoe Mustankorkea Oy:n jätteenkäsittelykeskuksen alueella Jyväskylässä. Kokeessa loppusijoitusalueen päälle istutettuja eri kasvuvaiheissa olevia energiapajukasvustoja sekä hybridihaapakasvustoa kasteltiin jätetäytön suotovedellä. Kokeessa käytettiin kasvualustoina tuhkamultaa, joka oli valmistettu tuhkasta, kompostista ja ylijäämämaa- aineksesta, sekä kompostia. Kasteluveden, valumavesien, kasvualustojen ja pajukasvuston ominaisuuksia seurattiin kokeen aikana analyysien avulla. Lisäksi alueen vesitaseen selvittämiseksi suoritettiin lysimetrikokeet, joissa lysimetreihin istutettuja pajuja kasteltiin suotovedellä sekä hanavedellä. Tulosten perusteella suotovesikastelu lisäsi sekä pajun että haavan kasvua. Kastelu lisäsi pajun ravinnepitoisuuksia. Se myös heikensi hieman pajun poltto-ominaisuuksia. Kasvualustan ominaisuuksiin kastelulla ei havaittu olevan vaikutuksia. Kastelumäärä, jota voidaan käyttää ilman valumia, on kokeen perusteella n. 100–600 mm/kasvukausi käytetyllä kastelujärjestelmällä. Kastelujärjestelmää kehittämällä on kuitenkin luultavasti mahdollista lisätä haihduntaa ja siten kastelumäärää merkittävästi.

Kevyen istutuskoneen suunnittelu puuntaimille

Työssä pyritään suunnittelemaan kevyempi versio jo olemassa olevasta puuntaimien istutuslaitteesta. Työ koostuu kahdesta osasta. Ensimmäisessä teoria osuudessa käydään läpi mekatronisen koneen suunnittelussa huomioitavia seikkoja ja järjestelmällistä tuotekehitysprosessia yleisesti. Toisessa osassa esitellään nykyisten istutuslaitteiden kehityshistoriaa ja nykyisin koneellisessa metsänistutuksessa käytössä olevia laitteita. Loppuratkaisujen aikaan saamisessa pyritään QFD-menetelmää käyttämällä saamaan aikaan kevyen istutuskoneen vaatimusprofiili ja profiilissa ilmi tulleiden vaatimusten ja toiveiden pohjalta kehitettiin ratkaisuja joilla perinteistä koneellista istutus toimintaa voidaan uudistaa. Materiaalinvalinnan avulla optimoitiin kevyttä istutuskonetta pyrkimällä löytämään ympäristöystävälliset materiaalit jotka ovat tuotteen elinkaarta kokonaisuutena ajatellen parhaat mahdolliset. Työssä saatiin aikaan malli jolla on mahdollista jatkokehittelyn jälkeen ja kunnolla tuotteistettuna edistää koneellisen metsänistutuksen yleistymistä. Työn aikana huomattiin, että suurimmat esteet metsän istutuksen koneellistumiselle ovat nykyisten koneiden korkeat hankinta- ja käyttökustannukset sekä koneiden käyttämisen vaatima ammattitaito. Kustannuksia alentamalla ja käyttökynnystä madaltamalla voi edistää koneellisen metsänistutuksen yleistymistä tehostamisen rinnalla.

Prosessilaitteen teräsrakenteen optimointi

Diplomityön tarkoituksena oli optimoida puukentän nosturin teräsrakenteiden kustannuksia ja selvittää halvemman valmistusmaan vaikutus nosturin kokonaiskustannukseen. Tavoitteena oli saada 15 % kokonaiskustannussäästö. Työn alussa perehdytään optimoitavan nosturin rakenteeseen ja mahdollisiin rakenteen optimoitaviin osiin. Teräsrakenteen optimointi alkoi kustannusrakenteen tarkalla selvittämisellä. Näin saatiin kuva nosturin kokonaiskustannuksesta ja mahdollisista säästökohteista. Uusien ideoiden kehittämisessä käytettiin hyväksi osatoimintojen pisteytystä ja ideamatriisia. Ideamatriisin lopputuloksena uudet rakenteet tarkastettiin nosturin kuormituksien suhteen ja valittiin kustannusten kannalta paras ratkaisu. Teräsrakenteeseen tehtiin muutoksia myös merirahdin konttien asettamien rajaehtojen mukaan. Kiinassa valmistettavalle teräsrakenteelle tehtiin rahtisuunnitelma, jossa selvitettiin optimaalinen rahtimuoto ja tarvittavien konttien lukumäärä. Tarjouskilpailun avulla saatiin halvin kuljetushinta valmistavalta tehtaalta työmaalle. Lopuksi nosturin optimoidun teräsrakenteen kustannuksia verrattiin työn alussa selvitettyyn kustannusrakenteeseen. Työn lopputuloksena päästiin 12 % potentiaaliseen kustannussäästöön, joka jäi kolme prosenttiyksikköä kustannussäästötavoitteesta.

Developing short sea shipping transportation chains at Helsinki-Tallinn route

Short sea shipping is an important part of the European economy and an alternative to road transport of goods in Europe. It represents an intermodal transport combination of sea and land on a Door-to-Door basis, and it aims to develop more sustainable transport network with the least negative impacts by the transport modes. This Master’s thesis addresses the development of short sea shipping transportation chains at Helsinki-Tallinn route. The Master´s thesis explores the development of short sea shipping at Helsinki-Tallinn route by analyzing the shipping costs per unit transported by different ship types and sizes between port of Helsinki-Vuosaari harbour and port of Tallinn-Muuga harbour, and examining the possibility of Ro-Ro traffic as well. The study is qualitative-quantitative method and it is based on a case study, data is collected from secondary and primary sources, and mixed methods analysis is used to implement the interviews and observations results with the databases analysis. In the thesis factors affecting on short sea shipping are explored and analyzed, also the possibility of Ro-Ro shipping is examined, by comparing the shipping cost and the environmental impact of different ships like container ships, Ropax, and CONRO ships. The finding of this research shows the importance of time at port and utilization as a shipping cost determinants, the relationship between ship type and costing, and the possibility of Ro-Ro shipping.