Electrochemical Characterisation of Filter Media Properties and Their Exploitation in Enhanced Filtration

Streaming potential measurements for the surface charge characterisation of different filter media types and materials were used. The equipment was developed further so that measurements could be taken along the surfaces, and so that tubular membranes could also be measured. The streaming potential proved to be a very useful tool in the charge analysis of both clean and fouled filter media. Adsorption and fouling could be studied, as could flux, as functions of time. A module to determine the membrane potential was also constructed. The results collected from the experiments conducted with these devices were used in the study of the theory of streaming potential as an electrokinetic phenomenon. Several correction factors, which are derived to take into account the surface conductance and the electrokinetic flow in very narrow capillaries, were tested in practice. The surface materials were studied using FTIR and the results compared with those from the streaming potentials. FTIR analysis was also found to be a useful tool in the characterisation of filters, as well as in the fouling studies. Upon examination of the recorded spectra from different depths in a sample it was possible to determine the adsorption sites. The influence of an external electric field on the cross flow microflltration of a binary protein system was investigated using a membrane electroflltration apparatus. The results showed that a significant improvement could be achieved in membrane filtration by using the measured electrochemical properties to help adjust the process conditions.

Monomer conversion of composite dental resins photoactivated by a halogen lamp and a LED: a FT-Raman spectroscopy study

Eighteen circular blocks of resins cured either by a LED or a halogen lamp (20, 40 and 60 s), had their top (T) and bottom (B) surfaces studied using a FT-Raman spectrometer. Systematic changes in the intensity of the methacrylate C=C stretching mode at 1638 cm-1 as a function of exposure duration were observed. The calculated degree of conversion (DC) ranged from 45.0% (B) to 52.0% (T) and from 49.0% (B) to 55.0% (T) for the LED and halogen lamp, respectively. LED and halogen light produced similar DC values with 40 and 60 s of irradiation.

Dynamic electrostatic force microscopy in liquid media

We present the implementation of dynamic electrostatic force microscopy in liquid media. This implementation enables the quantitative imaging of local dielectric properties of materials in electrolyte solutions with nanoscale spatial resolution. Local imaging capabilities are obtained by probing the frequency-dependent and ionic concentration-dependent electrostatic forces at high frequency (>1 MHz), while quantification of the interaction forces is obtained with finite-element numerical calculations. The results presented open a wide range of possibilities in a number of fields where the dielectric properties of materials need to be probed at the nanoscale and in a liquid environment.

Dynamic electrostatic force microscopy in liquid media

We present the implementation of dynamic electrostatic force microscopy in liquid media. This implementation enables the quantitative imaging of local dielectric properties of materials in electrolyte solutions with nanoscale spatial resolution. Local imaging capabilities are obtained by probing the frequency-dependent and ionic concentration-dependent electrostatic forces at high frequency (>1 MHz), while quantification of the interaction forces is obtained with finite-element numerical calculations. The results presented open a wide range of possibilities in a number of fields where the dielectric properties of materials need to be probed at the nanoscale and in a liquid environment.

Non-resorbable glass fibre-reinforced composite with porous surface as bone substitute material: Experimental studies in vitro and in vivo focused on bone-implant interface

The development of load-bearing osseous implant with desired mechanical and surface properties in order to promote incorporation with bone and to eliminate risk of bone resorption and implant failure is a very challenging task. Bone formation and resoption processes depend on the mechanical environment. Certain stress/strain conditions are required to promote new bone growth and to prevent bone mass loss. Conventional metallic implants with high stiffness carry most of the load and the surrounding bone becomes virtually unloaded and inactive. Fibre-reinforced composites offer an interesting alternative to metallic implants, because their mechanical properties can be tailored to be equal to those of bone, by the careful selection of matrix polymer, type of fibres, fibre volume fraction, orientation and length. Successful load transfer at bone-implant interface requires proper fixation between the bone and implant. One promising method to promote fixation is to prepare implants with porous surface. Bone ingrowth into porous surface structure stabilises the system and improves clinical success of the implant. The experimental part of this work was focused on polymethyl methacrylate (PMMA) -based composites with dense load-bearing core and porous surface. Three-dimensionally randomly orientated chopped glass fibres were used to reinforce the composite. A method to fabricate those composites was developed by a solvent treatment technique and some characterisations concerning the functionality of the surface structure were made in vitro and in vivo. Scanning electron microscope observations revealed that the pore size and interconnective porous architecture of the surface layer of the fibre-reinforced composite (FRC) could be optimal for bone ingrowth. Microhardness measurements showed that the solvent treatment did not have an effect on the mechanical properties of the load-bearing core. A push-out test, using dental stone as a bone model material, revealed that short glass fibre-reinforced porous surface layer is strong enough to carry load. Unreacted monomers can cause the chemical necrosis of the tissue, but the levels of leachable resisidual monomers were considerably lower than those found in chemically cured fibre-reinforced dentures and in modified acrylic bone cements. Animal experiments proved that surface porous FRC implant can enhance fixation between bone and FRC. New bone ingrowth into the pores was detected and strong interlocking between bone and the implant was achieved.

A Micromechanics-Based Damage Model for [± θ / 90n ]s Composite Laminates

A new damage model based on a micromechanical analysis of cracked [± θ / 90n ]s laminates subjected to multiaxial loads is proposed. The model predicts the onset and accumulation of transverse matrix cracks in uniformly stressed laminates, the effect of matrix cracks on the stiffness of the laminate, as well as the ultimate failure of the laminate. The model also accounts for the effect of the ply thickness on the ply strength. Predictions relating the elastic properties of several laminates and multiaxial loads are presented

An Interface Damage Model for the Simulation of Delamination Under Variable-Mode Ratio in Composite Materials

A thermodynamically consistent damage model for the simulation of progressive delamination under variable mode ratio is presented. The model is formulated in the context of the Damage Mechanics. The constitutive equation that results from the definition of the free energy as a function of a damage variable is used to model the initiation and propagation of delamination. A new delamination initiation criterion is developed to assure that the formulation can account for changes in the loading mode in a thermodynamically consistent way. The formulation proposed accounts for crack closure effets avoiding interfacial penetration of two adjacent layers aftercomplete decohesion. The model is implemented in a finite element formulation. The numerical predictions given by the model are compared with experimental results

Propagation through fractal media: The Sierpinski gasket and the Koch curve

We present new analytical tools able to predict the averaged behavior of fronts spreading through self-similar spatial systems starting from reaction-diffusion equations. The averaged speed for these fronts is predicted and compared with the predictions from a more general equation (proposed in a previous work of ours) and simulations. We focus here on two fractals, the Sierpinski gasket (SG) and the Koch curve (KC), for two reasons, i.e. i) they are widely known structures and ii) they are deterministic fractals, so the analytical study of them turns out to be more intuitive. These structures, despite their simplicity, let us observe several characteristics of fractal fronts. Finally, we discuss the usefulness and limitations of our approa

The Influence of the media and advertising on eating disorders

This article describes a literature review of the influence of advertising and the media on Eating Disorders (ED). Research published in scientific journals in various fields of social sciences such as sychology, psychiatry and communication science has enabled us to conclude that the content displayed in the media, including advertising, are enhancers of disorders and contribute significantly to body issatisfaction in relation to the perceived idea of beauty, it also facilitates the development of weight loss strategies in women and gain of muscle mass in men.

Learning in Digital Media: the legacy of McLuhan and his Impact on Formal Education

This paper describes a bibliographic analysis of the vision of Marshal McLuhan and the vision adopted by diverse current authors regarding the use of new interactive learning technologies. The paper also analyzes the transformation that will have to take place in the formal surroundings of education in order to improve their social function. The main points of view and contributions made by diverse authors are discussed. It is important that all actors involved in the educational process take in consideration these contributions in order to be ready for future changes.

Efecto de la suplementación con ácidos grasos de cadena media sobre la evolución de peso en lechones con poco peso al nacimiento

La evolución de peso en los períodos de lactación y transición de 583 lechones fue estudiada mediante un análisis estadístico, evaluando el efecto de la suplementación con ácidos grasos de cadena media (AGCM) en lechones con poco peso al nacimiento. 188 de los 375 lechones que nacieron con un peso al nacimiento (PN) <1250 g recibieron 3mL de AGCM cada 24 h durante los primeros 3 días de vida; su peso medio al destete (día 28) fue inferior respecto al grupo control (lechones no suplementados) (-114,17 g). No obstante, 106 de los 180 lechones nacidos con un PN <1000 g fueron suplementados, y su peso medio al destete y a finales de transición (día 63) fue superior respecto al grupo control (destete: +315,16 g; día 63: +775,47 g). Finalmente, los lechones suplementados con PN<800 g tuvieron los peores resultados: su diferencia de peso medio al destete fue de -177,58 g respecto al grupo control. Por lo tanto, en esta prueba fueron estudiados los lechones con un PN entre 800 y 999 g porque el grupo suplementado al destete tuvo una diferencia de peso medio considerable respecto al grupo control:+511,58 g. Asimismo, considerando una probabilidad de error inferior a 0,05, no hubieron diferencias significativas en las diferentes categorías de PN analizadas. De todas maneras, es importante destacar el alto grado de significación en la suplementación con AGCM en lechones con PN entre 800 y 999g (P=0,059). Por otra parte, el PN del grupo suplementado con PN<1000 g fue inferior que el del grupo no suplementado con PN<1000 g; esta diferencia de PN fue significativa (P=0,004) y como consecuencia el grado de significación en la suplementación con AGCM en lechones con PN entre 800 y 999 g fue inferior al esperado. Además, en esta prueba se incluyeron algunos resultados generales y también un análisis simple de supervivencia, aunque no era el objetivo principal

De scientia Dei media

Invocatio: kreik.

Digital social media: An interactive technology incorporated as a competitive advantage for business

In a more transparent and dynamic world, in which consumers trust other consumers more for advice and recommendations on products and services, the continuity of organizations appears to be associated with socialization, the sharing of interests and the interaction with the audience. This is associated with the incorporation of digital technologies to business, specifically the use of social media. Consequently, it is timely and interesting to explore the phenomenon of virtual socialization, although it is a littlestudied field and what is needed is an innovative and theoretical approach based upon theories of marketing and communication. Expertise in these areas is present in all organizations and their performance is important for appropriate development of them. This work is a qualitative analysis about the behavior, reactions and attitudes of individuals to organizations, in order to understand the social factors that contribute to sustainable competitive advantages of organizations which can support strategic and future actions. We conclude that relevant factors associated with the tacit knowledge of the organization, specifically to learning and social interaction of the organization and their knowledge of virtual communities. The higher the coexistence of factors, the more difficult is the replication and greater will be the hypothesis of sustainable competitive advantage.

Utilization of Sn/Nb2O5 composite for the removal of methylene blue

In this work, the oxidation of methylene blue textile dye in the presence of hydrogen peroxide, using niobium oxide impregnated with different proportions of tin (1, 5 and 10% in mass) as catalyst was studied. The materials were characterized by TPR, XPS, XRD and FTIR. The oxidation tests monitored by ESI-MS showed that the composite containing the higher amount of tin was the most efficient in the removal of the dye. The XRD, XPS, and TPR data presented evidence of the formation of the tin-niobium oxide composite containing Sn0 and supported SnO2.