A new beta-diketone complex with high color purity

In this work a new europium (III) complex with the following formula NH(4) [Eu(bmdm)(4)] was synthesized and characterized. The bmdm (butyl methoxy-dibenzoyl-methane) is a P-diketone molecule used as UV radiation absorber in sunscreen formulations. Coordination of this ligand to the Eu(3+) ion was confinned by FT-IR, while the Raman spectrum suggests the presence of NH(4)(+) ions. The photoluminescence spectra present narrow lines arising from f-f intra-configurational transitions (5)D(0-)(7)F(0,1,2,3,4), dominated by the hypersensitive (5)D(0)-(7)F(2) transition. In the spectrum recorded at 77 K, all transitions split into 2J + 1 lines suggesting that there is just one symmetry site around Eu(3+) ion. This symmetry is not centrosymmetric. The calculated intensity parameters are ohm(2) = 30.5 x 10(-20) cm(2) and ohm(4) = 5.91 x 10(-20) cm(2) for this complex. The CIE chromaticity coordinates (x = 0.67 and y = 0.32) show a dominant wavelength of 615 nm. The color gamut achieved by this complex is a 100% in the CIE color space. (c) 2005 Elsevier B.V. All rights reserved.

Hybrid reflections in InGaP/GaAs(001) by synchrotron radiation multiple diffraction

Hybrid reflections (HRs) involving substrate and layer planes (SL type) [Morelhao et al., Appl. Phys. Len. 73 (15), 2194 (1998)] observed in Chemical Beam Epitaxy (CBE) grown InGaP/GaAs(001) structures were used as a three-dimensional probe to analyze structural properties of epitaxial layers. A set of (002) rocking curves (omega-scan) measured for each 15 degrees in the azimuthal plane was arranged in a pole diagram in phi for two samples with different layer thicknesses (#A -58 nm and #B - 370 nm) and this allowed us to infer the azimuthal epilayer homogeneity in both samples. Also, it was shown the occurrence of (1 (1) over bar3) HR detected even in the thinner layer sample. Mappings of the HR diffraction condition (omega:phi) allowed to observe the crystal truncation rod through the elongation of HR shape along the substrate secondary reflection streak which can indicate in-plane match of layer/substrate lattice parameters. (C) 2009 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

Structural conditions that leads to photoluminescence emission in SrTiO3: An experimental and theoretical approach

Complex cluster [TiO5 center dot V-O(z)] and [SrO11 center dot V-O(z)] (where V-O(z)=V-O(X), V-O(center dot), V-O(center dot center dot)) vacancies were identified in disordered SrTiO3 powders prepared by the polymeric precursor method, based on experimental measurements by x-ray absorption near edge structure spectroscopy. The paramagnetic complex states of [TiO5 center dot V-O(center dot)] and [SrO11 center dot V-O(center dot)] with unpaired electrons were confirmed by electron paramagnetic resonance spectroscopy. The disordered powders showed strong photoluminescence at room temperature. Structural defects of disordered powders, in terms of band diagram, density of states, and electronic charges, were interpreted using high-level quantum mechanical calculations in the density functional framework. The four periodic models used here were consistent with the experimental data and explained the presence of photoluminescence. (C) 2008 American Institute of Physics.

Two-dimensional photonic crystals in antimony-based films fabricated by holography

In this work, we demonstrated the fabrication of two-dimensional (2D) photonic crystals layers (2D-PCLs) by combining holographic recording and the evaporation of antimony-based glasses. Such materials present high refractive indices that can be tuned from 1.8 to 2.4, depending on the film composition; thus, they are interesting dielectric materials for fabrication of 2D-PCLs. The good quality of the obtained samples allowed the measurement of their PC properties through the well-defined Fano resonances that appear in the transmittance spectrum measurements at different incidence angles. The experimental results are in good agreement with the calculated band diagram for the hexagonal asymmetric structure. (C) 2008 American Institute of Physics.

Razao Sr:Ba:Rb e tipologia de zircao em granitoides dos Estado de Sao Paulo, Parana e Minas Gerais

Chemical (Sr:Ba:Rb) and zircon typology data from the Nazare Paulista, Mairipora/Cantareira, Cunhaporanga, Tres Corregos, Morungaba, Socorro, Itu, Graciosa and Serra Carambei granitoid complexes from the states of Minas Gerais, Sao Paulo and Parana (SE/S Brazil) are presented and discussed. By the zircon typology method these complexes are refered, respectively, to the 2nd crustal, 3rd crustal/low temperature C-A, low temperature C-A, medium temperature C-A, medium/light temperature C-A, K-SA/Alkaline and alkaline series which are considered as generated under increasing temperature associated with a progressive major participation of mantle material. All these series display different positions and behaviour in the Sr:Ba:Rb diagram which reinforces the use of the zircon typology method in the study of granitoids. -from English summary

Anomalous flow behaviour of bauxite tailings

This paper deals with the anomalous flow behaviour observed in two bauxite tailings pumping systems, with 450 mm and 680 mm outer diameter. In order to enlarge the pipeline lengths in the field, tests were carried out in a laboratory test-loop in order to try to understand the anomalous (intermittent) flow behaviour and to solve the problem. Based on data obtained from these laboratory tests and using a generalized REYNOLDS number it was possible to obtain results that fit the MOODY ROUSE diagram.

Macroscopic quantum tunneling in a dc SQUID: Instanton splitting

The theory of macroscopic quantum tunneling is applied to a current-biased dc SQUID which constitutes a system of two interacting quantum degrees of freedom coupled to the environment. The decay probability is obtained in the exponential approximation for the overdamped case. Close to the critical driving force of the system, the decay of the metastable state is determined by a unique instanton solution describing the symmetric decay of the phases in each of the two Josephson juctions. Upon reducing the external driving force a new regime is reached where the instanton splits. The doubling of the decay channels reduces the decreasing of the decay rate in the quantum regime. A current-temperature phase diagram is constructed based on the Landau theory of phase transitions. Depending on the external parameters the system develops either a first- or a second-order transition to the split-instanton regime. © 1994 The American Physical Society.

Syntheses and luminescent properties of tetrahedral nickel(0) complexes

Tetrahedral nickel(0) complexes [NiL4], [Ni(dppe)2] and [Ni(CO)2(SbPh3)2] (L=AsPh3, SbPh3, P(OPh)3, dppe=1,2-bis(diphenylphosphino)ethane) were prepared by reduction of NiCl2·6H2O with NaBH4 under N2 or CO atmosphere in the presence of the ligand. The complex [Ni(SbPh3)4] was also obtained by electrolysis at -1.3 V (Ag/Ag+), under a platinum gauze, of the system NiCl2·6H2O/SbPh3 (molar ratio=1:4). These complexes, both in the solid state and in solution, show an orange emission at room temperature, when excited with UV radiation. A qualitative molecular orbital diagram for the [NiL4] complexes is proposed. Electronic absorption spectra of the complexes show bands near 400 nm assigned as MLCT π*2e←d2t2. A 1A1←3T1 transition is suggested for the emission observed in these systems. Lifetimes in microsecond range were estimated from time-resolved emission spectra. Spectroscopic properties of the free ligands have also been investigated.

Multifactorial control of water and saline intake: Role of α2-adrenoceptors

Water and saline intake is controlled by several mechanisms activated during dehydration. Some mechanisms, such as the production of angiotensin II and unloading of cardiovascular receptors, activate both behaviors, while others, such as the increase in blood osmolality or sodium concentration, activate water, but inhibit saline intake. Aldosterone probably activates only saline intake. Clonidine, anα2-adrenergic agonist, inhibits water and saline intake induced by these mechanisms. One model to describe the interactions between these multiple mechanisms is a wire-block diagram, where the brain circuit that controls each intake is represented by a summing point of its respective inhibiting and activating factors. The α2-adrenoceptors constitute an inhibitory factor common to both summing points.

Burial history and porosity evolution of Brazilian upper Jurassic to tertiary sandstone reservoirs

The parameter time-depth index (TDI) is applied in this study to quantify empirically the influence of burial history on sandstone porosity evolution. The TDI, expressed in kilometers per million years of age, is defined as the area in the burial history diagram enclosed by the burial curve of the reservoir and the axes of the diagram. In practice, reservoir depths during burial history are integrated at regular time intervals of 1 m.y. The calculations exclude present-day bathymetry or paleobathymetry. Sandstone reservoirs from several sedimentary basins along the Brazilian continental margin (Santos, Campos, Espírito Santo, Cumuruxatiba, Recôncavo, Sergipe, Alagoas, and Potiguar) were analyzed to investigate the evolution of porosity against TDI. These Upper Jurassic to Tertiary sandstones lie in depths of 700 to 4900 m, and are hydrocarbon charged (oil or gas). Average porosities of most of these reservoirs were obtained from core analysis, and a few porosity data were taken from well log interpretations. Detrital constituents of the sandstones are mainly quartz, feldspar, and granitic/gneissic rock fragments. Sandstones were grouped into three main reservoir types, based on composition (detrital quartz content) and grain sorting: Type I (average quartz content <50%) are very coarse grained to conglomeratic, poorly to very poorly sorted lithic arkoses. Rock fragments are mainly granitic/gneissic and coarse grained. Type II (average quartz content ranging from 50% to 70%) are fine- to coarse-grained (pebbles absent or occurring in small percentages), moderately sorted arkoses. Type III (average quartz content >80%) are fine to coarse, moderately to poorly sorted quartz arenites or subarkoses. Plots of average porosity against depth show great dispersion in porosity values; such dispersion is mostly due to differences in the reservoir burial histories. However, plotting porosity values against the TDI for individual reservoir types produces well-defined trends. The decrease in porosity is less marked in Type III reservoirs, intermediate in Type II, and faster in Type I. Such plots suggest that it is possible to make relatively accurate porosity predictions based on reservoir TDI, texture, and composition,: within the constraints of reservoir depth/age and basin tectonics analyzed in this study.

Chemistry of Biotites and Whole Rocks from the Rapakivi Itu Complex (Late Precambrian), State of São Paulo, SE Brazil

Chemical analyses for biotites and their host rocks from the Cabreúva (three facies) and Salto (five facies) intrusions from the multiple-centered rapakivi Itu Complex, State of São Paulo, Brazil, are presented and compared. The Cabreúva intrusion comprises different kinds of mainly even-grained biotite and hornblende-bearing syenogranites, monzogranites and quartz syenites and the Salto intrusion several types of mainly porphyritic biotite syenogranites, some of them hornblende-bearing. The biotites from the Salto intrusion (S-micas) show a more restricted composition than those from the Cabreúva intrusion (C-micas). This reflects the chemical variability of the two bodies which is smaller in the Salto intrusion and larger in the Cabreúva pluton. In the AlIV x Fet/(Fet+Mg) diagram the S- and C-micas show similar AlIV contents, around 2.2-2.3, but C-micas have higher Fet/(Fet+Mg) ratios (0.7-0.9) compared to those of S-micas (0.5-0.6). In the Mg:(Al+Fe+3+Ti):(Fe+2+Mn) diagram the S-micas are defined as Fe+2-biotites and the C-micas occupy the area between the Fe+2-biotites and the siderophyllite/lepidomelane fields, slightly overlapping the latter. In the Al2O3 × FeOt, MgO × FeOt, Al2O3 x MgO and Alt x Mg diagrams, the S-micas always lie on the calc-alkaline/alkaline boundary (or in the subalkaline field) whereas the C-micas systematically plot in the alkaline field, reflecting the higher alkalis content of the Cabreúva intrusion. In the Fet/(Fet+Mg) x SiO2 diagram, the S-micas lie on a smooth line whereas the C-micas from the different facies are separated by distinct chemical gaps reflecting the major or minor chemical overlapping of the facies from the Salto and Cabreúva intrusions.

Geochemical Variability of the Rapakivi Itu Province, State of São Paulo, SE Brazil

This paper describes the chemical variability of the Late Precambrian Itu Rapakivi Province (IRP), State of São Paulo, SE Brazil, based on 187 selected analyses from the Itu, São Francisco, Sorocaba, Campina do Veado and Sguario/ Correa granites. The IRP has an almost uniform petrographic character conferred by the overall dominance of subalkaline biotite granites. Monzogranites (adamellites), granodiorites, quartz syenites, quartz monzonites are rare to very rare rock types and tonalites and quartz diorites are almost restricted to enclaves. Typical chemical features are the high FeO*/MgO ratio, a clustering of the K2O values between 4.5 and 6.0 wt.% and K2O/Na2O ratios which define the IRP as mildly potassic although more potassic rocks also occur. The overal Peacock Alkalinity Index is 54 defining the Province as alkali-calcic. In the Shand diagram the data cluster near the metaluminous/peraluminous boundary. Relationships between Nb, Rb and Y stress the within plate character of the IRP and the relationships between Rb, Ba and Sr reveal the importance of feldspar fractionation in magma evolution. The data also show an interbody and an intrabody chemical variability due to the variation in the composition of the crustal magma protoliths, as assigned by K/Rb relations. The presence of several magmatic cycles which built up the major intrusions reflects a magma ascent from collecting chambers successively drained and recharged, a feature in agreement with the clear link between the bodies and long lived, successively reactivated, transcurrent faults. Most of the chemical features of the IRP correspond to those of the classical Finnish rapakivi granites.

Carbon monoxide oxidation over platinum: Stable, oscillatory and quasi-chaotic regimes

We model the heterogeneously catalyzed oxidation of CO over a Pt surface. A phase diagram analysis is used to probe the several steady state regimes and their stability. We incorporate an experimentally observed 'slow' sub-oxide kinetic step, thereby generalizing a previously presented model. In agreement with experimental data, stable, oscillatory and quasi-chaotic regimes are obtained. Furthermore, the inclusion of the sub-oxide step yields a relaxation oscillation regime. © 1998 Elsevier Science B.V. All rights reserved.

Feynman integrals with tensorial structure in the negative dimensional integration scheme

The negative-dimensional integration method (NDIM) is revealing itself as a very useful technique for computing massless and/or massive Feynman integrals, covariant and noncovanant alike. Up until now however, the illustrative calculations done using such method have been mostly covariant scalar integrals/without numerator factors. We show here how those integrals with tensorial structures also can be handled straightforwardly and easily. However, contrary to the absence of significant features in the usual approach, here the NDIM also allows us to come across surprising unsuspected bonuses. Toward this end, we present two alternative ways of working out the integrals and illustrate them by taking the easiest Feynman integrals in this category that emerge in the computation of a standard one-loop self-energy diagram. One of the novel and heretofore unsuspected bonuses is that there are degeneracies in the way one can express the final result for the referred Feynman integral.

New 12kW three-phase 18-pulse high power factor AC-DC converter with regulated output voltage for rectifier units

This work presents a new high power factor three-phase rectifier based on a Y-connected differential autotransformer with reduced kVA and 18-pulse input current followed by three DC-DC boost converters. The topology provides a regulated output voltage and natural three-phase input power factor correction. The lowest input current harmonic components are the 17th and the 19th. Three boost converters, with constant input currents and regulated parallel connected output voltages are used to process 4kW each one. Analytical results from Fourier analyses of winding currents and the vector diagram of winding voltages are presented. Simulation results to verify the proposed concept and experimental results are shown in the paper.