Influence of all-out and fast start of 5-min cycling time trial performance

Purpose: To examine the influence of two different fast-start pacing strategies on performance and oxygen consumption (V˙O2) during cycle ergometer time trials lasting ∼5 min. Methods: Eight trained male cyclists performed four cycle ergometer time trials whereby the total work completed (113 ± 11.5 kJ; mean ± SD) was identical to the better of two 5-min self-paced familiarization trials. During the performance trials, initial power output was manipulated to induce either an all-out or a fast start. Power output during the first 60 s of the fast-start trial was maintained at 471.0 ± 48.0 W, whereas the all-out start approximated a maximal starting effort for the first 15 s (mean power: 753.6 ± 76.5 W) followed by 45 s at a constant power output (376.8 ± 38.5 W). Irrespective of starting strategy, power output was controlled so that participants would complete the first quarter of the trial (28.3 ± 2.9 kJ) in 60 s. Participants performed two trials using each condition, with their fastest time trial compared. Results: Performance time was significantly faster when cyclists adopted the all-out start (4 min 48 s ± 8 s) compared with the fast start (4 min 51 s ± 8 s; P < 0.05). The first-quarter V˙O2 during the all-out start trial (3.4 ± 0.4 L·min-1) was significantly higher than during the fast-start trial (3.1 ± 0.4 L·min-1; P < 0.05). After removal of an outlier, the percentage increase in first-quarter V˙O2 was significantly correlated (r = -0.86, P < 0.05) with the relative difference in finishing time. Conclusions: An all-out start produces superior middle distance cycling performance when compared with a fast start. The improvement in performance may be due to a faster V˙O2 response rather than time saved due to a rapid acceleration.

Sex on premises venue (SOPV) health promotion project in response to sustained increases in HIV notifications

Background: Due to increases in HIV notifications in Queensland, a health promotion outreach project was developed with sex on premises venues (SOPV) in Brisbane. Methods: A health promotion officer (HPO) promoted safer sex behaviours among SOPV patrons over 14 months, including providing information, counselling and skills to enhance safer sexual behaviours and providing referrals. Surveys were introduced to facilitate discussions regarding HIV/sexually transmissible infections, testing and safer sex practices. Results: The project demonstrated feasibility within this highly sexualised environment, and was enhanced by careful monitoring and revising the procedure to improve patron/staff responses to the project. The introduction of a survey instrument was a significant contributor to the project’s effectiveness, providing opportunities for patrons to discuss a variety of key sexual health issues. Conclusions: This initiative reflected effective partnering between the Health Department, a community HIV/lesbian, gay, bisexual and transgender organisation and private industry. Despite initial difficulties, the presence of a health worker within an SOPV was acceptable to patrons and allowed for brief interventions to be conducted. This project was deemed effective for a limited time period and within certain constraints.

Design optimisation using advanced artificial intelligent system coupled to hybrid-game strategies

One of the main aims in artificial intelligent system is to develop robust and efficient optimisation methods for Multi-Objective (MO) and Multidisciplinary Design (MDO) design problems. The paper investigates two different optimisation techniques for multi-objective design optimisation problems. The first optimisation method is a Non-Dominated Sorting Genetic Algorithm II (NSGA-II). The second method combines the concepts of Nash-equilibrium and Pareto optimality with Multi-Objective Evolutionary Algorithms (MOEAs) which is denoted as Hybrid-Game. Numerical results from the two approaches are compared in terms of the quality of model and computational expense. The benefit of using the distributed hybrid game methodology for multi-objective design problems is demonstrated.

Survey of eResearch practices and skills at QUT, Australia

Queensland University of Technology (QUT) is a multidisciplinary university in Brisbane, Queensland, Australia, and has 40,000 students and 1,700 researchers. Notable eResearch infrastructure includes the QUT ePrints repository, Microsoft QUT Research Centre, the OAK (Open Access to Knowledge) Law Project, Cambia and leading research institutes. ---------- The Australian Government, via the Australian National Data Service (ANDS), is funding institutions to identify and describe their research datasets, to develop and populate data repositories and collaborative infrastructure, and to seed the Australian Research Data Commons. QUT is currently broadening its range of research support services, including those to support the management of research data, in recognition of the value of these datasets as products of the research process, and in order to maximize the potential for reuse. QUT is integrating Library and High Performance Computing (HPC) services to achieve its research support goals. ---------- The Library and HPC released an online survey using Key Survey to 1,700 researchers in September 2009. A comprehensive range of eResearch practices and skills was presented for response, and grouped into areas of scholarly communication and open access publishing, using collaborative technologies, data management, data collection and management, computation and visualization tools. Researchers were asked to rate their skill level on each practice. 254 responses were received over two weeks. Eight focus groups were also held with 35 higher degree research (HDR) students and staff to provide additional qualitative feedback. A similar survey was released to 100 support staff and 73 responses were received.---------- Preliminary results from the researcher survey and focus groups indicate a gap between current eResearch practices, and the potential for researchers to engage in eResearch practices. Researchers are more likely to seek advice from their peers, than from support staff. HDR students are more positive about eResearch practices and are more willing to learn new ways of conducting research. An account of the survey methodology, the results obtained, and proposed strategies to embed eResearch practices and skills across and within the research disciplines will be provided.

Towards a new model of successful faking

Existing literature has failed to find robust relationships between individual differences and the ability to fake psychological tests, possibly due to limitations in how successful faking is operationalised. In order to fake, individuals must alter their original profile to create a particular impression. Currently, successful faking is operationalised through statistical definitions, informant ratings, known groups comparisons, the use of archival and baseline data, and breaches of validity indexes. However, there are many methodological limitations to these approaches. This research proposed a three component model of successful faking to address this, where an original response is manipulated into a strategic response, which must match a criteria target. Further, by operationalising successful faking in this manner, this research takes into account the fact that individuals may have been successful in reaching their implicitly created profile, but that this may not have matched the criteria they were instructed to fake.Participants (N=48, 22 students and 26 non-students) completed the BDI-II honestly. Participants then faked the BDI-II as if they had no, mild, moderate and severe depression, as well as completing a checklist revealing which symptoms they thought indicated each level of depression. Findings were consistent with a three component model of successful faking, where individuals effectively changed their profile to what they believed was required, however this profile differed from the criteria defined by the psychometric norms of the test.One of the foremost issues for research in this area is the inconsistent manner in which successful faking is operationalised. This research allowed successful faking to be operationalised in an objective, quantifiable manner. Using this model as a template may allow researchers better understanding of the processes involved in faking, including the role of strategies and abilities in determining the outcome of test dissimulation.

An application of Keller’s Brand Equity Model in a B2B context

Powerful brands create meaningful images in the minds of customers (Keller, 1993). A strong brand image and reputation enhances differentiation and has a positive influence on buying behaviour (Gordon et al., 1993; McEnally and de Chernatony, 1999). While the power of branding is widely acknowledged in consumer markets, the nature and importance of branding in industrial markets remains under-researched. Many business-to-business (B2B) strategists have claimed brand-building belongs in the consumer realm. They argue that industrial products do not need branding as it is confusing and adds little value to functional products (Collins, 1977; Lorge, 1998; Saunders and Watt, 1979). Others argue that branding and the concept of brand equity however are increasingly important in industrial markets, because it has been shown that what a brand means to a buyer can be a determining factor in deciding between industrial purchase alternatives (Aaker, 1991). In this context, it is critical for suppliers to initiate and sustain relationships due to the small number of potential customers (Ambler, 1995; Webster and Keller, 2004). To date however, there is no model available to assist B2B marketers in identifying and measuring brand equity. In this paper, we take a step in that direction by operationalising and empirically testing a prominent brand equity model in a B2B context. This makes not only a theoretical contribution by advancing branding research, but also addresses a managerial need for information that will assist in the assessment of industrial branding efforts.

The soft skills of project management : a view from diploma graduates

A research study was conducted in a key area of project management: stakeholder and relationship management through communication - ‘the soft skills’. It was conducted with Diploma of Project Management graduates from one Australian Registered Training Organisation (RTO), the Australian College of Project Management (ACPM). The study was designed to initially identify the qualifications and project management experience of the participants. Further, it identified the respondents’ understanding of and attitude to commonly held principles and literature within the project management field as it relates to the soft skills of projects. This is specifically connected to their project experience and knowledge, approach to project communications, and the stakeholder’s needs. Some of the literature showed that through the management and application of the project soft skills by project managers may actually be a recipe for project success. Hence, an important underpinning of this study was that the project manager can enhance project success (or reduce the impact of failure) by identifying and prioritising stakeholders, developing and implementing strategies for engaging and communicating with them. The use of a positivist approach to this research study allowed for the evaluation and understanding of respondents to the emergent theories of successful projects being delivered through the management of stakeholders, communications, and relationships. Consequently, a quantitative approach to this study was undertaken. The participants were drawn from graduates who completed (graduated) from the ACPM with the Diploma of Project Management between January 2004 and December 2007 only. A list of graduates was collated from this period indicating that a total of 656 graduates have completed and graduated with the qualification. The data collection for this study was done in one phase only. The questionnaire was emailed individually by the researcher directly to the selected potential respondents. Subsequently, a total of 44 responses were received, providing an overall response rate of 43%. Two key factors emerged from the survey questionnaire. Firstly, the need for the soft skills to be incorporated in project management curriculum and education programs, and secondly, that successful projects are delivered through the management and application of the project soft skills. It is expected that the findings of this study be provided across various forums (such as vocational education and training, and project management conferences) and via project management bodies such as the Australian Institute of Project Management (AIPM) to inform learning and provide greater insight into the soft skills of project management. It is the contention of the researcher that this quantitative study of Diploma of Project Management graduates’ views and attitudes highlights the importance of project soft skills and its importance in the delivery of successful projects as well as being part of the competencies of a successful project manager. This study also revealed the value of project experience and knowledge as it pertains to the management and application of the project soft skills.

Teachers’ understanding of school connectedness : implications for the development and implementation of school based injury prevention strategies

Aim: Worldwide, injury is the leading cause of death and disability for young people. Injuries among young people are commonly associated with risk taking behaviour, including violence and transport risks, which often occur in the context of alcohol use. The school environment has been identified as having a significant role in shaping adolescent behaviour. In particular, school connectedness, the degree to which adolescents feel that they belong and are accepted at school, has been shown to be an important protective factor. Strategies for increasing school connectedness may therefore be effective in reducing risk taking and associated injury. Prior to developing connectedness strategies, it is important to understand the perspectives of those in the school regarding the construct and how it is realised in the school context. The aim of this research was to understand teachers’ perspectives of school connectedness, the strategies they employ to connect with students, and their perceptions of school connectedness as a strategy for risk taking and injury prevention. Method: In depth interviews of approximately 45 minutes duration were conducted with 13 Health and PE teachers and support staff from 2 high schools in Southeast Queensland, Australia. Additionally, 6 focus group workshop discussions were held with 35 Education department employees (5-6 per group), including teachers from 15 Southeast Queensland high schools. Results: Participants were found to place strong importance on the development of connectedness among students, including those at risk for problem behaviour. Strategies used to promote connectedness included building trust, taking an interest in each student and being available to talk to, and finding something positive for students to succeed at. Teachers identified strategies as being related to decreased risk taking behavior. Teacher training on school connectedness was perceived as an important and useful inclusion in a school based injury prevention program. Conclusions: The established link between increased school connectedness and decreased problem behaviour has implications for school based strategies designed to decrease adolescent risk taking behaviour and associated injury. Targeting school connectedness as a point of intervention, in conjunction with individual attitude and behaviour change programs, may be an effective injury prevention strategy.

The development of strategies to drive government and academic policy to underpin e-portfolio practice

The impact of government policy can become a strong enabler for the use of e-portfolios to support learning and employability. E-portfolio policy and practice seeks to draw together the different elements of integrated education and learning, graduate attributes, employability skills, professional competencies and lifelong learning, ultimately to support an engaged and productive workforce. Drawing on and updating the research findings from a nationwide research study conducted as part of the Australian ePortfolio Project, the present chapter discusses two important areas of the e-portfolio environment, government policy and academic policy. The focus is on those jurisdictions where government and academic policy issues have had a significant impact on e-portfolio practice, such as the European Union, the Netherlands, Scandinavian countries and the United Kingdom, as well as in Australia and New Zealand. These jurisdictions are of interest as government policy discussions are currently focusing on the need for closer integration between the different education and employment sectors. Finally, issues to be considered as well as strategies for driving policy decision making are presented.

Safety impacts of alcohol and other drugs in the construction industry : a research methodology

Anecdotal evidence from the infrastructure and building sectors highlights issues of drugs and alcohol and its association with safety risk on construction sites. Operating machinery and mobile equipment, proximity to live traffic together with congested sites, electrical equipment and operating at heights conspire to accentuate the potential adverse impact of drugs and alcohol in the workplace. While most Australian jurisdictions have identified this as a critical safety issue, information is limited regarding the prevalence of alcohol and other drugs in the workplace and there is limited evidential guidance regarding how to effectively and efficiently address such an issue. No known study has scientifically evaluated the relationship between the use of drugs and alcohol and safety impacts in construction, and there has been only limited adoption of nationally coordinated strategies, supported by employers and employees to render it socially unacceptable to arrive at a construction workplace with impaired judgement from drugs and alcohol. A nationally consistent collaborative approach across the construction workforce - involving employers and employees; clients; unions; contractors and sub-contractors is required to engender a cultural change in the construction workforce – in a similar manner to the on-going initiative in securing a cultural change to drink-driving in our society where peer intervention and support is encouraged. This study has four key objectives. Firstly, using the standard World Health Organisation AUDIT, a national qualitative and quantitative assessment of the use of drugs and alcohol will be carried out. This will build upon similar studies carried out in the Australian energy and mining sectors. Secondly, the development of an appropriate industry policy will adopt a non-punitive and rehabilitative approach developed in consultation with employers and employees across the infrastructure and building sectors, with the aim it be adopted nationally for adoption at the construction workplace. Thirdly, an industry-specific cultural change management program will be developed through a nationally collaborative approach to reducing the risk of impaired performance on construction sites and increasing workers’ commitment to drugs and alcohol safety. Finally, an implementation plan will be developed from data gathered from both managers and construction employees. Such an approach stands to benefit not only occupational health and safety, through a greater understanding of the safety impacts of alcohol and other drugs at work, but also alcohol and drug use as a wider community health issue. This paper will provide an overview of the background and significance of the study as well as outlining the proposed methodology that will be used to evaluate the safety impacts of alcohol and other drugs in the construction industry.

Immunogenicity and protective efficacy of an anti-Streptococcus pyogenes vaccine candidate in multiple animal species

Streptococcus pyogenes, also known as Group A Streptococcus (GAS) has been associated with a range of diseases from the mild pharyngitis and pyoderma to more severe invasive infections such as streptococcal toxic shock. GAS also causes a number of non-suppurative post-infectious diseases such as rheumatic fever, rheumatic heart disease and glomerulonephritis. The large extent of GAS disease burden necessitates the need for a prophylactic vaccine that could target the diverse GAS emm types circulating globally. Anti-GAS vaccine strategies have focused primarily on the GAS M-protein, an extracellular virulence factor anchored to GAS cell wall. As opposed to the hypervariable N-terminal region, the C-terminal portion of the protein is highly conserved among different GAS emm types and is the focus of a leading GAS vaccine candidate, J8-DT/alum. The vaccine candidate J8-DT/alum was shown to be immunogenic in mice, rabbits and the non-human primates, hamadryas baboons. Similar responses to J8-DT/alum were observed after subcutaneous and intramuscular immunization with J8-DT/alum, in mice and in rabbits. Further assessment of parameters that may influence the immunogenicity of J8-DT demonstrated that the immune responses were identical in male and female mice and the use of alum as an adjuvant in the vaccine formulation significantly increased its immunogenicity, resulting in a long-lived serum IgG response. Contrary to the previous findings, the data in this thesis indicates that a primary immunization with J8-DT/alum (50ƒÊg) followed by a single boost is sufficient to generate a robust immune response in mice. As expected, the IgG response to J8- DT/alum was a Th2 type response consisting predominantly of the isotype IgG1 accompanied by lower levels of IgG2a. Intramuscular vaccination of rabbits with J8-DT/alum demonstrated that an increase in the dose of J8-DT/alum up to 500ƒÊg does not have an impact on the serum IgG titers achieved. Similar to the immune response in mice, immunization with J8-DT/alum in baboons also established that a 60ƒÊg dose compared to either 30ƒÊg or 120ƒÊg was sufficient to generate a robust immune response. Interestingly, mucosal infection of naive baboons with a M1 GAS strain did not induce a J8-specific serum IgG response. As J8-DT/alum mediated protection has been previously reported to be due to the J8- specific antibody formed, the efficacy of J8-DT antibodies was determined in vitro and in vivo. In vitro opsonization and in vivo passive transfer confirmed the protective potential of J8-DT antibodies. A reduction in the bacterial burden after challenge with a bioluminescent M49 GAS strain in mice that were passively administered J8-DT IgG established that protection due to J8-DT was mediated by antibodies. The GAS burden in infected mice was monitored using bioluminescent imaging in addition to traditional CFU assays. Bioluminescent GAS strains including the ‘rheumatogenic’ M1 GAS could not be generated due to limitations with transformation of GAS, however, a M49 GAS strain was utilized during BLI. The M49 serotype is traditionally a ‘nephritogenic’ serotype associated with post-streptococcal glomerulonephritis. Anti- J8-DT antibodies now have been shown to be protective against multiple GAS strains such as M49 and M1. This study evaluated the immunogenicity of J8-DT/alum in different species of experimental animals in preparation for phase I human clinical trials and provided the ground work for the development of a rapid non-invasive assay for evaluation of vaccine candidates.

The effects of L1 orthography on processing an artificial logographic script

To date, studies have focused on the acquisition of alphabetic second languages (L2s) in alphabetic first language (L1) users, demonstrating significant transfer effects. The present study examined the process from a reverse perspective, comparing logographic (Mandarin-Chinese) and alphabetic (English) L1 users in the acquisition of an artificial logographic script, in order to determine whether similar language-specific advantageous transfer effects occurred. English monolinguals, English-French bilinguals and Chinese-English bilinguals learned a small set of symbols in an artificial logographic script and were subsequently tested on their ability to process this script in regard to three main perspectives: L2 reading, L2 working memory (WM), and inner processing strategies. In terms of L2 reading, a lexical decision task on the artificial symbols revealed markedly faster response times in the Chinese-English bilinguals, indicating a logographic transfer effect suggestive of a visual processing advantage. A syntactic decision task evaluated the degree to which the new language was mastered beyond the single word level. No L1-specific transfer effects were found for artificial language strings. In order to investigate visual processing of the artificial logographs further, a series of WM experiments were conducted. Artificial logographs were recalled under concurrent auditory and visuo-spatial suppression conditions to disrupt phonological and visual processing, respectively. No L1-specific transfer effects were found, indicating no visual processing advantage of the Chinese-English bilinguals. However, a bilingual processing advantage was found indicative of a superior ability to control executive functions. In terms of L1 WM, the Chinese-English bilinguals outperformed the alphabetic L1 users when processing L1 words, indicating a language experience-specific advantage. Questionnaire data on the cognitive strategies that were deployed during the acquisition and processing of the artificial logographic script revealed that the Chinese-English bilinguals rated their inner speech as lower than the alphabetic L1 users, suggesting that they were transferring their phonological processing skill set to the acquisition and use of an artificial script. Overall, evidence was found to indicate that language learners transfer specific L1 orthographic processing skills to L2 logographic processing. Additionally, evidence was also found indicating that a bilingual history enhances cognitive performance in L2.

Low fat loss response after medium-term supervised exercise in obese is associated with exercise-induced increase in food reward

Objective: To examine exercise-induced changes in the reward value of food during medium-term supervised exercise in obese individuals. ---------- Subjects/Methods: The study was a 12-week supervised exercise intervention prescribed to expend 500 kcal/day, 5 d/week. 34 sedentary obese males and females were identified as responders (R) or non-responders (NR) to the intervention according to changes in body composition relative to measured energy expended during exercise. Food reward (ratings of liking and wanting, and relative preference by forced choice pairs) for an array of food images was assessed before and after an acute exercise bout. ---------- Results. 20 responders and 14 non-responders were identified. R lost 5.2 kg±2.4 of total fat mass and NR lost 1.7 kg±1.4. After acute exercise, liking for all foods increased in NR compared to no change in R. Furthermore, NR showed an increase in wanting and relative preference for high-fat sweet foods. These differences were independent of 12-weeks regular exercise and weight loss. ---------- Conclusion. Individuals who showed an immediate post-exercise increase in liking and increased wanting and preference for high-fat sweet foods displayed a smaller reduction in fat mass with exercise. For some individuals, exercise increases the reward value of food and diminishes the impact of exercise on fat loss.