Boro em cana-de-açúcar cultivada em solução nutritiva

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Solution heat treatment of plasma nitrided 15-5PH stainless steel - Part I: Improvement of the corrosion resistance

The results of the investigation on Solution Heat Treatment of Plasma Nitrided (SHTPN) precipitation-hardened steel 15-5PH are presented. The layers have been obtained by the plasma nitriding process followed by solution heat treatment at different temperatures. The influence of the solution heat treatment after nitriding on the dissolution process of the nitrided layer has been considered. The nitrided layers were studied by scanning electron microscopy, X-ray microanalysis (EDX), and X-Ray diffraction. Micro-hardness tests of the nitrided layers and solubilized nitrided layers have been carried out and interpreted by considering the processing conditions. It was found that high nitrogen austenitic cases could be obtained after SHTPN of martensitic precipitation-hardened steel (15-5PH). When Solution Heat Treatment (SHT) was performed at 1100 °C, some precipitates were observed. The amount of precipitates significantly reduced when the temperature increased. The EDX microanalysis indicated that the precipitate may be chromium niobium nitride. When the precipitation on the austenite phase occurred in small amount, the corrosion resistance increased in SHTPN specimens and the pit nucleation potential also increased. The best corrosion result occurred for SHT at 1200 °C.

Avaliação do estado nutricional de mudas de Gonçalo Alves (Astronium Fraxinifolium)

The planting of seedlings, the establishment and maintenance of the natural regeneration process, or the combination thereof, are methods used in the recovery of degraded or disturbed environments, however, often require the addition of soil conditioners. This study aimed to evaluate the influence of conditioners, introduced in degraded soil on growth and nutritional status of Astronium fraxinifolium seedlings. To conduct the experimentation were used as degraded soil conditioner, ash from sugarcane bagasse (CZ) and macrophytes (MC), at the doses of 0, 15, 30 and 45 t ha-1 and 0, 16 and 32 t ha-1 respectively, which combined produced 12 treatments, with three replications, and for field installation, was used the experimental randomized block design. Astronium fraxinifolium (Gonçalo Alves) seedlings, native tree species in cerrado, were introduced in the experimental area and, after 12 months, were evaluated for leaf concentration of nitrogen, phosphorus, potassium, calcium, magnesium, sulfur, boron, copper, iron, manganese and zinc (N, P, K, Ca, Mg, S, B, Cu, Fe, Mn and Zn, respectively). Seedlings and adult plants of A. fraxinifolium were collected in preserved cerrado reserve were also analyzed for nutrients foliar concentration to perform a comparative analysis. The leaves collection in the preserved cerrado and experimental area, was accompanied by soil sampling (0.0 - 0,20 m deep), which was analyzed for phosphorus, OM (organic matter), pH, K, Ca, Mg, Al+H (potential acidity), Al (aluminum), Cu, Fe, Mn and Zn. The results show that the applied residues contributed to raise the foliar concentration of Cu and Fe. The foliar concentration of nutrients was higher in A. fraxinifolium seedlings from preserved cerrado, except for B, which was similar between areas, besides Cu and Fe with higher levels in the seedlings from experimental area. The combined addition of residues (MC and CZ), led to increase the plants height and diameter. This...

Reguladores vegetais e nutrientes minerais no metabolismo de plantas de tomateiro

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Doses e modos de aplicação de boro na produção de mudas de nespereira

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Sinais de vibração no monitoramento do processo de retificação plana de cerâmicas avançadas

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Acúmulo de nutrientes e resposta da alface à adubação fosfatada

Nutrient absorption and response of lettuce to phosphorus fertilization. The objective of this study was to evaluate the response of lettuce (cultivar Verônica) to different levels of phosphorus fertilization. The experiment was conducted from 25/09/2003 (sowing) to 03/12/2003 (harvesting) at the Fazenda Experimental São Manuel, UNESP/FCA, Botucatu/SP, under protective structures. The experiment was conducted in a randomized block design, with five treatments (0, 200, 400, 600 and 800kg.ha-1 of P2 O5, in the form of triple superphosphate) and five replications. Plants were grown in 13L plastic pots containing Latossolo Vermelho Distrófico Típico. A quadratic response was observed for the fresh mass of the plant shoots and leaf area, with maximum equivalent levels of 733 and 756kg.ha-1 of P2 O5 , respectively, as well as for potassium, calcium, magnesium, sulfur, boron, copper, iron, manganese and zinc accumulation. Linear increases were observed with the treatments of P2 O5 for dry mass of the shoots, leaf number, plant height and nitrogen and phosphorus accumulation.

Soil fertility, nutrition and early growth of physic nut as affected by nitrogen fertilization

The initial growth and mineral nutrition of the physic nut (Jatropha curcas L.) as a function of nitrogen (N) fertilization was investigated. The transplanting of seedlings was carried out in plastic pots filled with 50 dm3 of a Rhodic Hapludox, under a plastic greenhouse. In addition to a control treatment, the dosages of 0, 40, 80, 120, and 160 mg dm−3 N were tested. The results demonstrated that N fertilization for the cultivation of physic nut could be added as top dressing from 60 days after planting with a dosage of 65 mg dm−3. A SPAD index of 46 can be used as a nutritional reference to its initial development. Furthermore, the results suggested that the order of nutrient accumulation by the physic nut plants is as follows: potassium (K) > N > magnesium (Mg) > calcium (Ca) > phosphorus (P) > sulfur (S) > iron (Fe) > manganese (Mn) > boron (B) > zinc (Zn) > copper (Cu).

Doses e modos de aplicação de Boro e adubação com Zinco na cultura do milho

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo da utilização de ferramentas a base de nitreto de silício (Si3N4) e alumina (Al2O3) na usinagem do ferro fundido vermicular

Machining is one of the most commonly manufacturing processes used in the modern world, consuming millions of dollars annually. Because of this, it is crucial for the automotive industry to reduce costs on their heat-resistant alloy machining processes, such as compacted graphite iron (CGI), which has shown an increasing trend of its application in diesel engine blocks, brakes disks, among other applications, due to its superior mechanical properties to gray cast iron. Despite this advantage, its use is still limited due to its difficulty of machining, moreover, cutting tools are displayed as the main factor in increasing the machining cost. Seeking an alternative to a better machinability of CGI, this paper aims to study two types of ceramic tools developed in Brazil, and benchmark their performance by dry turning. For this, were used CGI class 450 and two tools: ceramic of silicon nitride (Si3N4) and alumina-based (Al2O3), with a cutting speed (Vc) of 300, 400 and 500 m / min; feed (f) of 0.2 mm / rev and depth of cut (ap) of 0.5 mm, using three replicates and starting with new cutting edges. The results showed that the Al2O3 tool had the best performance in Vc of 500 m / min, while the Si3N4 tool had the best results in Vc of 300 m / min. This can be explained by the tool of Si3N4 based include soft intergranular phase, called amorphous, while alumina has higher abrasion resistance due to its high refractoriness. The results make it clear that the tools have significant potential for machining of compacted graphite iron, being necessary a strict control of the cutting parameters used

HIGH TEMPERATURE RARE EARTH COMPOUNDS: SYNTHESIS, CHARACTERIZATION AND APPLICATIONS IN DEVICE FABRICATION

As the area of nanotechnology continues to grow, the development of new nanomaterials with interesting physical and electronic properties and improved characterization techniques are several areas of research that will be remain vital for continued improvement of devices and the understanding in nanoscale phenomenon. In this dissertation, the chemical vapor deposition synthesis of rare earth (RE) compounds is described in detail. In general, the procedure involves the vaporization of a REClx (RE = Y, La, Ce, Pr, Nd, Sm, Gd, Tb, Dy, Ho) in the presence of hydride phase precursors such as decaborane and ammonia at high temperatures and low pressures. The vapor-liquid-solid mechanism was used in combination with the chemical vapor deposition process to synthesize single crystalline rare earth hexaboride nanostructures. The crystallographic orientation of as-synthesized rare earth hexaboride nanostructures and gadolinium nitride thin films was controlled by judicious choice of specific growth substrates and modeled by analyzing x-ray diffraction powder patterns and crystallographic models. The rare earth hexaboride nanostructures were then implemented into two existing technologies to enhance their characterization capabilities. First, the rare earth hexaboride nanowires were used as a test material for the development of a TEM based local electrode atom probe tomography (LEAP) technique. This technique provided some of the first quantitative compositional information of the rare earth hexaboride systems. Second, due to the rigidity and excellent conductivity of the rare earth hexaborides, nanostructures were grown onto tungsten wires for the development of robust, oxidation resistant nanomanipulator electronic probes for semiconductor device failure analysis.

Estudo da utilização de ferramentas a base de nitreto de silício (Si3N4) e alumina (Al2O3) na usinagem do ferro fundido vermicular

Machining is one of the most commonly manufacturing processes used in the modern world, consuming millions of dollars annually. Because of this, it is crucial for the automotive industry to reduce costs on their heat-resistant alloy machining processes, such as compacted graphite iron (CGI), which has shown an increasing trend of its application in diesel engine blocks, brakes disks, among other applications, due to its superior mechanical properties to gray cast iron. Despite this advantage, its use is still limited due to its difficulty of machining, moreover, cutting tools are displayed as the main factor in increasing the machining cost. Seeking an alternative to a better machinability of CGI, this paper aims to study two types of ceramic tools developed in Brazil, and benchmark their performance by dry turning. For this, were used CGI class 450 and two tools: ceramic of silicon nitride (Si3N4) and alumina-based (Al2O3), with a cutting speed (Vc) of 300, 400 and 500 m / min; feed (f) of 0.2 mm / rev and depth of cut (ap) of 0.5 mm, using three replicates and starting with new cutting edges. The results showed that the Al2O3 tool had the best performance in Vc of 500 m / min, while the Si3N4 tool had the best results in Vc of 300 m / min. This can be explained by the tool of Si3N4 based include soft intergranular phase, called amorphous, while alumina has higher abrasion resistance due to its high refractoriness. The results make it clear that the tools have significant potential for machining of compacted graphite iron, being necessary a strict control of the cutting parameters used

Theoretical luminescence spectra in p-type superlattices based on InGaAsN

In this work, we present a theoretical photoluminescence (PL) for p-doped GaAs/InGaAsN nanostructures arrays. We apply a self-consistent method in the framework of the effective mass theory. Solving a full 8 x 8 Kane's Hamiltonian, generalized to treat different materials in conjunction with the Poisson equation, we calculate the optical properties of these systems. The trends in the calculated PL spectra, due to many-body effects within the quasi-two-dimensional hole gas, are analyzed as a function of the acceptor doping concentration and the well width. Effects of temperature in the PL spectra are also investigated. This is the first attempt to show theoretical luminescence spectra for GaAs/InGaAsN nanostructures and can be used as a guide for the design of nanostructured devices such as optoelectronic devices, solar cells, and others.

Incorporation of PbF2 into Heavy Metal Oxide Borate Glasses. Structural Studies by Solid State NMR

A series of heavy metal oxide (HMO) glasses with composition 26.66B(2)O(3)-16GeO(2)-4 Bi2O3-(53.33-x)PbO-xPbF2 (0 <= x <= 40) were prepared and characterized with respect to their bulk (glass transition and crystallization temperatures, densities, molar volumes) and spectroscopic properties. Homogeneous glasses are formed up to x = 30, while crystallization of beta-PbF2 takes place at higher contents. Substitution of PbO by PbF2 shifts the optical band gap toward higher energies, thereby extending the UV transmission window significantly toward higher frequencies. Raman and infrared absorption spectra can be interpreted in conjunction with published reference data. Using B-11 and F-19 high-resolution solid state NMR as well as B-11/F-19 double resonance methodologies, we develop a quantitative structural description of this material. The fraction of four-coordinate boron is found to be moderately higher compared to that in glasses with the same PbO/B2O3 ratios, suggesting some participation of PbF2 in the network transformation process. This suggestion is confirmed by the F-19 NMR spectra. While the majority of the fluoride ions is present as ionic fluoride, similar to 20% of the fluorine inventory acts as a network modifier, resulting in the formation of four-coordinate BO3/2F- units. These units can be identified by F-19{B-11} rotational echo double resonance and B-11{F-19} cross-polarization magic angle spinning (CPMAS) data. These results provide the first unambiguous evidence of B-F bonding in a PbF2-modified glass system. The majority of the fluoride ions are found in a lead-dominated environment. F-19-F-19 homonuclear dipolar second moments measured by spin echo decay spectroscopy are quantitatively consistent with a model in which these ions are randomly distributed within the network modifier subdomain consisting of PbO, Bi2O3, and PbF2. This model, which implies both the features of atomic scale mixing with the network former borate species and some degree of fluoride ion clustering is consistent with all of the experimental data obtained on these glasses.

DEFICIENCY SYMPTOMS AND UPTAKE OF MICRONUTRIENTS BY CASTOR BEAN GROWN IN NUTRIENT SOLUTION

Castor bean is a nutrient-demanding species, but there is still little information on its micronutrient requirements. The objectives of this study were to evaluate the effects of levels of B (2.5, 12.5 and 25.0 mu mol L-1), Cu (0.05, 0.25 and 0.50 mu mol L-1), Mn (0.2, 1.0 and 2.0 mu mol L-1) and Zn (0.2, 1.0 and 2.0 mu mol L-1) in a nutrient solution on plant B, Cu, Mn and Zn concentrations and uptake, vegetative growth and fruit yield of castor bean "Iris", grown in greenhouse. The experiment was arranged in a completely randomized block design with three replicates. The first deficiency symptoms were observed for B, followed by Zn, Cu and Mn. The main changes in the cell ultrastructure due to lack of B were thickening of the cell walls and middle lamellae, distorted chloroplasts and tightly stacked thylakoids, besides the absence of starch grains. The Mn, Zn and Cu deficiencies led to disruption of chloroplasts, disintegration of thylakoids and absence of amyloplasts. The concentration and uptake of B, Cu, Mn, and Zn in castor bean plants increased with micronutrient supply in the solution. Fruit yield was drastically reduced by B and Mn deficiencies. On the other hand, the dry matter yield of the shoot and root of castor bean plants was not. In the treatment with full nutrient solution, the leaves accumulated 56 and 48 % of the total B and Mn taken up by the plants, respectively, and the seeds and roots 85 and 61 % of the total Cu and Zn taken up, respectively. This shows the high demand of castor bean Iris for B and Mn for fruit yield.