The 'Arc of prosperity' revisited: Homelessness policy change in north western Europe

This paper compares continuity and change in homelessness policy in Ireland, Scotland and Norway with a particular focus on the period of post-crisis austerity measures (2008-2016). The analytical approach draws on institutional theory and the notion of path dependency, which has rarely been applied to comparative homelessness research. The paper compares welfare and housing systems in the three countries prior to presenting a detailed analysis of the conceptualisation and measurement of homelessness; the institutions which address homelessness; and the evidence of change in the post-2008 period. The analysis demonstrates that challenges remain in comparing the nature of homelessness and policy responses across nation states, even where they have a number of similar characteristics, and despite some EU influence towards homelessness policy convergence. Similarly, national-level homelessness policy change could not be interpreted as entirely a result of the external shock of the 2008 general financial crisis, as existing national policy goals and programmes were also influential. Overall, embedded national frameworks and institutions were resilient, but sufficiently flexible to deliver longer term policy shifts in response to the changing nature of the homelessness problem and national policy goals. Institutionalism and path dependency were found to be useful in developing the comparative analysis of homelessness policy change and could be fruitfully applied in future longitudinal, empirical research across a wider range of countries.

A comparative study of the structural, mechanical and tribological characteristics of TiSiC-Cr coatings prepared in CH4 and C2H2 reactive atmosphere by cathodic vacuum arc

TiSiC-Cr coatings, with Cr and Si as additional elements, were deposited on Si, C 45 and 316 L steel substrates via cathodic arc evaporation. Two series of coatings with thicknesses in the range of 3.6–3.9 μm were produced, using either CH4 or C2H2 as carbon containing gas. For each series, different coatings were prepared by varying the carbon rich gas flow rate between 90 and 130 sccm, while maintaining constant cathode currents (110 and 100 A at TiSi and Cr cathodes, respectively), substrate bias (–200 V) and substrate temperature (∼320 °C). The coatings were analyzed for their mechanical characteristics (hardness, adhesion) and tribological performance (friction, wear), along with their elemental and phase composition, chemical bonds, crystalline structure and cross-sectional morphology. The coatings were found to be formed with nano-scale composite structures consisting of carbide crystallites (grain size of 3.1–8.2 nm) and amorphous hydrogenated carbon. The experimental results showed significant differences between the two coating series, where the films formed from C2H2 exhibited markedly superior characteristics in terms of microstructure, morphology, hardness, friction behaviour and wear resistance. For the coatings prepared using CH4, the measured values of crystallite size, hardness, friction coefficient and wear rate were in the ranges of 7.2–8.2 nm, 26–30 GPa, 0.3–0.4 and 2.1–4.8 × 10−6 mm3 N−1 m−1, respectively, while for the coatings grown in C2H2, the values of these characteristics were found to be in the ranges of 3.1–3.7 nm, 41–45 GPa, 0.1–0.2 and 1.4–3.0 × 10−6 mm3 N−1 m−1, respectively. Among the investigated coatings, the one produced using C2H2 at the highest flow rate (130 sccm) exhibited the highest hardness (45.1 GPa), the lowest friction coefficient (0.10) and the best wear resistance (wear rate of 1.4 × 10−6 mm3 N−1 m−1).

Clemson Sandhill Farmers Market : market flash

This periodical tells about all the activities going on at the Sandhill Farmers Market and other markets in the Columbia area. Many things are hot linked to the market flash including recipes, planting tips, Clemson University and the South Carolina Farmer's Market.

Clemson Sandhill Farmers Market : market flash

This periodical tells about all the activities going on at the Sandhill Farmers Market and other markets in the Columbia area. Many things are hot linked to the market flash including recipes, planting tips, Clemson University and the South Carolina Farmer's Market.

Clemson Sandhill Farmers Market : market flash

This periodical tells about all the activities going on at the Sandhill Farmers Market and other markets in the Columbia area. Many things are hot linked to the market flash including recipes, planting tips, Clemson University and the South Carolina Farmer's Market.

A produção de vinhos finos: um flash do desafio brasileiro.

No Brasil, a viticultura ocupa uma área de aproximadamente 71 mil hectares, com vinhedos estabelecidos desde o extremo sul do País, em latitude de 31 o Sul, até regiões situadas muito próximas ao equador, em latitude de 5 o Sul. Em função da diversidade ambiental, existem no País pólos vitícolas típicos de regiões temperadas, caracterizadas por um período de repouso hibernal; pólos em áreas subtropicais, onde a videira é cultivada com dois ciclos anuais, definidos em função de um período de temperaturas mais baixas, nos quais há risco de geadas; e pólos de viticultura tropical, onde é possível a realização de podas sucessivas, com a realização de dois e meio a três ciclos vegetativos por ano. Nos últimos anos, as estatísticas oficiais registram uma produção de uvas que varia em torno de 1,2 milhão de toneladas por ano. Deste volume, cerca de 45% é destinado ao processamento para a elaboração de vinhos, sucos e outros derivados, e 55% comercializado para o consumo in natura no mercado interno e exportação.

Computational design of a new type of sandwich cross-section for a defined solution of a tree-like column produced by wire-and-arc additive manufacturing

When it comes to designing a structure, architects and engineers want to join forces in order to create and build the most beautiful and efficient building. From finding new shapes and forms to optimizing the stability and the resistance, there is a constant link to be made between both professions. In architecture, there has always been a particular interest in creating new shapes and types of a structure inspired by many different fields, one of them being nature itself. In engineering, the selection of optimum has always dictated the way of thinking and designing structures. This mindset led through studies to the current best practices in construction. However, both disciplines were limited by the traditional manufacturing constraints at a certain point. Over the last decades, much progress was made from a technological point of view, allowing to go beyond today's manufacturing constraints. With the emergence of Wire-and-Arc Additive Manufacturing (WAAM) combined with Algorithmic-Aided Design (AAD), architects and engineers are offered new opportunities to merge architectural beauty and structural efficiency. Both technologies allow for exploring and building unusual and complex structural shapes in addition to a reduction of costs and environmental impacts. Through this study, the author wants to make use of previously mentioned technologies and assess their potential, first to design an aesthetically appreciated tree-like column with the idea of secondly proposing a new type of standardized and optimized sandwich cross-section to the construction industry. Parametric algorithms to model the dendriform column and the new sandwich cross-section are developed and presented in detail. A catalog draft of the latter and methods to establish it are then proposed and discussed. Finally, the buckling behavior of this latter is assessed considering standard steel and WAAM material properties.

Caratterizzazione in camera climatica dei rivelatori a scintillazione in corso di installazione a M.te Cimone per l’esperimento Gamma-Flash

Questa Tesi di Laurea è legata agli aspetti tecnologici dell'esperimento Gamma-Flash, progetto coordinato dall'Istituto Nazionale di Astrofisica finanziato dall'Agenzia Spaziale Italiana che ha lo scopo di studiare eventi altamente energetici che avvengono in atmosfera denominati Terrestial Gamma-ray Flashes (TGFs). Questi eventi hanno uno stretto legame con i fulmini che avvengono durante episodi temporaleschi. I fulmini producono particelle ionizzate ed elettroni che per effetto bremmstrahlung emettono radiazione in un ampio intervallo di energie da centinaia di keV a decine di MeV. Questo tipo di eventi è stato rivelato da numerose missioni da satellite fin dagli anni '90 (BATSE/CGRO) e successivamente con i satelliti RHESSI, AGILE, BeppoSAX e Fermi. Molto più rare sono le osservazioni di questi eventi da terra o da rivelatori posti su velivoli. Gamma-Flash ha lo scopo di realizzare strumentazione per la rivelazione di questi eventi da un osservatorio posto su M.te Cimone (2165m s.l.m) e su un aereo in grado di raggiungere quote di 8-10000m. L'esperimento viene effettuato attraverso rivelatori a scintillazione e con elettronica dedicata la cui risposta in energia dipende dalla temperatura di funzionamento. È quindi importante conoscere come il detector si comporta al variare della temperatura, che, soprattutto nell'esperimento terrestre, può variare di decine di gradi anche su tempi scala brevi. Scopo di questa tesi è stato quindi di caratterizzare uno dei rivelatori che saranno posti all'Osservatorio O. Vittori di M.te Cimone utilizzando una camera climatica che simula le condizioni di temperatura variabili e riscontrabili durante l'esperimento.

Design, fabrication and mechanical characterization of a structural node made using Wire and Arc Additive Manufacturing (WAAM) technology

Additive Manufacturing (AM), also known as “3D printing”, is a recent production technique that allows the creation of three-dimensional elements by depositing multiple layers of material. This technology is widely used in various industrial sectors, such as automotive, aerospace and aviation. With AM, it is possible to produce particularly complex elements for which traditional techniques cannot be used. These technologies are not yet widespread in the civil engineering sector, which is slowly changing thanks to the advantages of AM, such as the possibility of realizing elements without geometric restrictions, with less material usage and a higher efficiency, in particular employing Wire-and-Arc Additive Manufacturing (WAAM) technology. Buildings that benefit most from AM are all those structures designed using form-finding and free-form techniques. These include gridshells, where joints are the most critical and difficult elements to design, as the overall behaviour of the structure depends on them. It must also be considered that, during the design, the engineer must try to minimize the structure's own weight. Self-weight reductions can be achieved by Topological Optimization (TO) of the joint itself, which generates complex geometries that could not be made using traditional techniques. To sum up, weight reductions through TO combined with AM allow for several potential benefits, including economic ones. In this thesis, the roof of the British Museum is considered as a case study, analysing the gridshell structure of which a joint will be chosen to be designed and manufactured, using TO and WAAM techniques. Then, the designed joint will be studied in order to understand its structural behaviour in terms of stiffness and strength. Finally, a printing test will be performed to assess the production feasibility using WAAM technology. The computational design and fabrication stages were carried out at Technische Universität Braunschweig in Germany.

Calibration of design strength values of Wire and Arc Additive Manufacturing inclined bars and intersections

Although being studied only for few years, Wire and Arc Additive Manufacturing (WAAM) will become the predominant way of producing stainless-steel elements in a near-like future. The analysis and study of such elements has yet to be defined in a proper way, but the projects regarding this subject are innovating more and more thanks to the findings discovered by the latter. This thesis is focused on an initial stage on the analysis of mechanical and geometrical properties of such stainless-steel elements produced by MX3D laboratories in Amsterdam, and to perform a calibration of the design strength values by means of Annex D of Eurocode 0, which talks about the analysis of the semi-probabilistic safety factors, hence the definition of characteristic values. Moreover, after testing the stainless-steel specimens by means of strain gauges and after obtaining mechanical and geometrical properties, a statistical analysis of such properties and an evaluation of characteristic values is performed. After this, there is to execute the calibration of design strength values of WAAM inclined bars and intersections.

Educação ambiental na vila Joana D'arc: uma proposta de promoção de saúde, cidadania e qualidade de vida

O trabalho tem por objetivo relatar uma proposta de intervenção na Vila Joana D'arc, pertencente à área de abrangência do Centro de Saúde Tirol em Belo Horizonte, abordando o tema Educação Ambiental. Durante o Curso de Especialização em Atenção Básica em Saúde da Família, a autora elaborou o Diagnóstico Situacional da Equipe Prata. Como problema principal foi detectado o descarte inadequado do lixo na Vila Joana Darc, que atrai insetos e roedores para o peridomicílio da população. Esta situação além de degradar o meio ambiente, agrava a saúde da comunidade. A educação ambiental, dentro deste contexto, em conjunto com a promoção da saúde é uma perspectiva de desenvolver a cidadania e melhorar a qualidade de vida da população.

What Is The Best Indication For Single-incision Ophira Mini Sling? Insights From A 2-year Follow-up International Multicentric Study.

The Ophira Mini Sling System involves anchoring a midurethral, low-tension tape to the obturator internus muscles bilaterally at the level of the tendinous arc. Success rates in different subsets of patients are still to be defined. This work aims to identify which factors influence the 2-year outcomes of this treatment. Analysis was based on data from a multicenter study. Endpoints for analysis included objective measurements: 1-h pad-weight (PWT), and cough stress test (CST), and questionnaires: International Consultation on Incontinence Questionnaire-Short Form (ICIQ-SF) and Urinary Distress Inventory (UDI)-6. A logistic regression analysis evaluated possible risk factors for failure. In all, 124 female patients with stress urinary incontinence (SUI) underwent treatment with the Ophira procedure. All patients completed 1 year of follow-up, and 95 complied with the 2-year evaluation. Longitudinal analysis showed no significant differences between results at 1 and 2 years. The 2-year overall objective results were 81 (85.3%) patients dry, six (6.3%) improved, and eight (8.4%) incontinent. A multivariate analysis revealed that previous anti-incontinence surgery was the only factor that significantly influenced surgical outcomes. Two years after treatment, women with previous failed surgeries had an odds ratio (OR) for treatment failure (based on PWT) of 4.0 [95% confidence interval (CI) 1.02-15.57). The Ophira procedure is an effective option for SUI treatment, with durable good results. Previous surgeries were identified as the only significant risk factor, though previously operated patients showed an acceptable success rate.

Influence Of Fluorescent Dye On Physical-mechanical Properties Of Luting Cements For Confocal Microscopy Analysis.

To evaluate the influence of a fluorescent dye (rhodamine B) on the physical and mechanical properties of three different luting cements: a conventional adhesive luting cement (RelyX ARC, 3M/ESPE), a self-adhesive luting cement (RelyX U-200, 3M/ESPE), and a self-etching and self-adhesive luting cement (SeT PP, SDI). The cements were mixed with 0.03 wt% rhodamine B, formed into bar-shaped specimens (n = 10), and light cured using an LED curing unit (Radii, SDI) with a radiant exposure of 32 J/cm(2) . The Knoop hardness (KHN), flexural strength (FS), and Young's modulus (YM) analyses were evaluated after storage for 24 h. Outcomes were subjected to two-way ANOVA and Tukey's test (P = 0.05) for multiple comparisons. No significant differences in FS or YM were observed among the tested groups (P ≥ 0.05); the addition of rhodamine B increased the hardness of the luting cements tested. The addition of a fluorescent agent at 0.03 wt% concentration does not negatively affect the physical-mechanical properties of the luting cement polymerization behavior.

Occurrence Of Isoflavonoids In Brazilian Common Bean Germplasm (phaseolus Vulgaris L.).

Common bean (Phaseolus vulgaris) is present in the daily diet of various countries and, as for other legumes, has been investigated for its nutraceutical potential. Thus, 16 genotypes from different gene pools, representing seven types of seed coats and different responses to pathogens and pests, were selected to verify their isoflavone contents. The isoflavonoids daidzein and genistein and the flavonols kaempferol, myricetin, and quercetin were found. Grains of the black type showed the highest concentrations of isoflavonoids and were the only ones to exhibit daidzein. IAC Formoso, with high protein content and source of resistance to anthracnose, showed the greatest concentration of genistein, representing around 11% of the content present in soybean, as well as high levels of kaempferol. Arc 1, Raz 55, and IAC Una genotypes showed high content of coumestrol. The results suggest the use of IAC Formoso to increase the nutraceutical characteristics in common bean.