Method development for the simultaneous determination of methylmercury and inorganic mercury in seafood

This paper reports the method development for the simultaneous determination of methylmercury MeHgþ) and inorganic mercury (iHg) species in seafood samples. The study focused on the extraction and quantification of MeHgþ (the most toxic species) by liquid chromatography coupled to on-line UV irradiation and cold vapour atomic fluorescence spectroscopy (LC-UV-CV-AFS), using HCl 4 mol/L as the extractant agent. Accuracy of the method has been verified by analysing three certified reference materials and different spiked samples. The values found for total Hg and MeHgþ for the CRMs did not differ significantly from certified values at a 95% confidence level, and recoveries between 85% and 97% for MeHgþ, based on spikes, were achieved. The detection limits (LODs) obtained were 0.001 mg Hg/kg for total mercury, 0.0003 mg Hg/kg for MeHgþ and 0.0004 mg Hg/kg for iHg. The quantification limits (LOQs) established were 0.003 mg Hg/kg for total mercury, 0.0010 mg Hg/kg for MeHgþ and 0.0012 mg Hg/kg for iHg. Precision for each mercury species was established, being 12% in terms of RSD in all cases. Finally, the developed method was applied to 24 seafood samples from different origins and total mercury contents. The concentrations for Total Hg, MeHg and iHg ranged from 0.07 to 2.33, 0.003-2.23 and 0.006-0.085 mg Hg/kg, respectively. The established analytical method allows to obtain results for mercury speciation in less than 1 one hour including both, sample pretreatment and measuring step.

Suorituskyvyn mittaaminen sahateollisuudessa

Diplomityön tarkoituksena oli rakentaa sahateollisuuteen sopiva suoritus kykymittaristo. Järjestelmästä tehtiin koko yrityksen kattava ja tasapainoinen järjestelmä, jota voidaan käyttää hyväksi johtamisessa, tiedottamisessa ja palautteen antamisessa. Apua suorituskyvyn analysointiin ja mittaamiseen pyrittiin saamaan suunnittelemalla myös strategiakartta, joka selventää suorituskyvyn taustoja. Aluksi esiteltiin suorituskyvyn mittaamista ja strategiakarttoja käsittelevää kirjallisuutta. Itse järjestelmän suunnittelu lähti liikkeelle yrityksen visiosta, strategiasta ja menestystekijöistä. Niiden perusteella valittiin viisi seurattavaa suorituskyvyn osa-aluetta ja niihin kuhunkin omat mittarit. Nämä viisi osa aluetta otettiin mukaan myös, kun strategiakartta visualisoitiin. Koekäytön jälkeen järjestelmä otettiin virallisesti käyttöön. Tutkimuksessa havaittiin, että pienillä ja keskisuurilla sahoilla on suorituskyvyn analysointijärjestelmän suunnittelussa otettava huomioon erityisesti raaka aineeseen liittyvät tekijät, koska raaka-aine on merkittävä kustannustekijä ja sen saatavuus on välillä epävarmaa. Strategiakartta selkeytti kohdeyrityksen visiota ja strategiaa. Strategiakarttaa voidaan myöhemmin hyödyntää kehityskeskusteluissa. Yrityksessä koettiin jo pelkkä suunnitteluprosessi hyödylliseksi, mutta järjestelmän toimivuus voidaan havaita vasta myöhemmin, kun tuloksia on kerätty pidemmältä ajalta. Järjestelmää pitää kehittää ja parantaa sekä tuloksia pitää analysoida, jotta järjestelmästä lopulta saadaan hyöty irti. Yrityksessä uskotaan, että järjestelmällä saavutetaan myöhemmin hyviä tuloksia

Managing manufacturing data and improving its accuracy

There are two main objects in this study: First, to prove the importance of data accuracy to the business success, and second, create a tool for observing and improving the accuracy of ERP systems production master data. Sub-objective is to explain the need for new tool in client company and the meaning of it for the company. In the theoretical part of this thesis the focus is in stating the importance of data accuracy in decision making and it's implications on business success. Also basics of manufacturing planning are introduced in order to explain the key vocabulary. In the empirical part the client company and its need for this study is introduced. New master data report is introduced, and finally, analysing the report and actions based on the results of analysis are explained. The main results of this thesis are finding the interdependence between data accuracy and business success, and providing a report for continuous master data improvement in the client company's ERP system.

Valmistettavuuden huomioiminen harvesteripään tuotekehitysprosessissa

Työn tavoitteena on tutkia metsäkoneen uuden harvesteripäämallin tuotekehitysprosessia valmistettavuuden näkökulmasta, selvittää tuotekehitysprosessin eri vaiheet sekä pyrkiä löytämään mahdolliset ongelmakohdat ja niihin ratkaisumallit. Työn tilanneella yrityksellä on pitkä historia ja kokemus harvesteripäiden tuotekehityksestä niin tuotteiden kuin tuotannon osalta. Dokumentoitu prosessi kuitenkin on puuttunut ja tämän työn tarkoituksena on tuottaa ko. prosessi valmistettavuuden huomioimisesta harvesteripään tuotekehitysprosessissa. Tutkimuksessa hyödynnetään alan kirjallisuutta ja yrityksen kokemuksia ja laaditaan niiden pohjalta dokumentointi tuotekehitysprosessin tueksi. Tutkimuksen perusteella havaittiin muutoksen hallinnan ja menetelmäsuunnittelun sekä hitsausten aiheuttamien muodonmuutosten olevan prosessin kriittisimpiä tekijöitä.

Productivity and innovation spillovers: Micro evidence from Spain

This article analyses the impact that innovation expenditure and intrasectoral and intersectoral externalities have on productivity in Spanish firms. While there is an extensive literature analysing the relationship between innovation and productivity, in this particular area there are far fewer studies that examine the importance of sectoral externalities, especially with the focus on Spain. One novelty of the study, which covers the industrial and service sectors, is that we also consider jointly the technology level of the sector in which the firm operates and the firm size. The database used is the Technological Innovation Panel, PITEC, which includes 12,813 firms for the year 2008 and has been little used in this type of study. The estimation method used is Iteratively Reweighted Least Squares method, IRLS, which is very useful for obtaining robust estimations in the presence of outliers. The results confirm that innovation has a positive effect on productivity, especially in high-tech and large firms. The impact of externalities is more heterogeneous because, while intrasectoral externalities have a poitive and significant effect, especially in low-tech firms independently of size, intersectoral externalities have a more ambiguous effect, being clearly significant for advanced industries in which size has a positive effect.

The regional distribution of unemployment. What do micro-data tell us?

Regional disparities in unemployment rates are large and persistent. The literature provides evidence of their magnitude and evolution, as well as evidence of the role of certain economic, demographic and environmental factors in explaining the gap between regions of low and high unemployment. Most of these studies, however, adopt an aggregate approach and so do not account for the individual characteristics of the unemployed and employed in each region. This paper, by drawing on micro-data from the Spanish wave of the Labour Force Survey, seeks to remedy this shortcoming by analysing regional differentials in unemployment rates. An appropriate decomposition of the regional gap in the average probability of being unemployed enables us to distinguish between the contribution of differences in the regional distribution of individual characteristics from that attributable to a different impact of these characteristics on the probability of unemployment. Our results suggest that the well-documented disparities in regional unemployment are not just the result of regional heterogeneity in the distribution of individual characteristics. Non-negligible differences in the probability of unemployment remain after controlling for this type of heterogeneity, as a result of differences across regions in the impact of the observed characteristics. Among the factors considered in our analysis, regional differences in the endowment and impact of an individual’s education are shown to play a major role.

Economic Methodology: A Historical Introduction.

Ever since the inception of economics over two hundred years ago, the tools at the discipline's disposal have grown more and more more sophisticated. This book provides a historical introduction to the methodology of economics through the eyes of economists. The story begins with John Stuart Mill's seminal essay from 1836 on the definition and method of political economy, which is then followed by an examination of how the actual practices of economists changed over time to such an extent that they not only altered their methods of enquiry, but also their self-perception as economists. Beginning as intellectuals and journalists operating to a large extent in the public sphere, they then transformed into experts who developed their tools of research increasingly behind the scenes. No longer did they try to influence policy agendas through public discourse; rather they targeted policymakers directly and with instruments that showed them as independent and objective policy advisors, the tools of the trade changing all the while. In order to shed light on this evolution of economic methodology, this book takes carefully selected snapshots from the discipline's history. It tracks the process of development through the nineteenth and twentieth centuries, analysing the growth of empirical and mathematical modelling. It also looks at the emergence of the experiment in economics, in addition to the similarities and differences between modelling and experimentation. This book will be relevant reading for students and academics in the fields of economic methodology, history of economics, and history and philosophy of the social sciences.

The genetic content of chromosomal inversions across a wide latitudinal gradient

There is increasing evidence regarding the role of chromosomal inversions in relevant biological processes such as local adaptation and speciation. A classic example of the adaptive role of chromosomal polymorphisms is given by the clines of inversion frequencies in Drosophila subobscura, repeatable across continents. Nevertheless, not much is known about the molecular variation associated with these polymorphisms. We characterized the genetic content of ca. 600 individuals from nine European populations following a latitudinal gradient by analysing 19 microsatellite loci from two autosomes (J and U) and the sex chromosome (A), taking into account their chromosomal inversions. Our results clearly demonstrate the molecular genetic uniformity within a given chromosomal inversion across a large latitudinal gradient, particularly from Groningen (Netherlands) in the north to Málaga (Spain) in the south, experiencing highly diverse environmental conditions. This low genetic differentiation within the same gene arrangement across the nine European populations is consistent with the local adaptation hypothesis for th evolutionof chromosomal polymorphisms. We also show the effective role of chromosomal inversions in maintaining different genetic pools within these inverted genomic regions even in the presence of high gene flow. Inversions represent thus an important barrier to gene flux and can help maintain specific allelic combinations with positive effects on fitness. Consistent patterns of microsatellite allele-inversion linkage disequilibrium particularly in loci within inversions were also observed. Finally, we identified areas within inversions presenting clinal variation that might be under selection.

An interactive web-GIS tool for risk analysis: a case study in the Fella River basin, Italy

This paper presents a prototype of an interactive web-GIS tool for risk analysis of natural hazards, in particular for floods and landslides, based on open-source geospatial software and technologies. The aim of the presented tool is to assist the experts (risk managers) in analysing the impacts and consequences of a certain hazard event in a considered region, providing an essential input to the decision-making process in the selection of risk management strategies by responsible authorities and decision makers. This tool is based on the Boundless (OpenGeo Suite) framework and its client-side environment for prototype development, and it is one of the main modules of a web-based collaborative decision support platform in risk management. Within this platform, the users can import necessary maps and information to analyse areas at risk. Based on provided information and parameters, loss scenarios (amount of damages and number of fatalities) of a hazard event are generated on the fly and visualized interactively within the web-GIS interface of the platform. The annualized risk is calculated based on the combination of resultant loss scenarios with different return periods of the hazard event. The application of this developed prototype is demonstrated using a regional data set from one of the case study sites, Fella River of northeastern Italy, of the Marie Curie ITN CHANGES project.

Estudi tècnic-econòmic de l'adaptació a la Llei de Benestar Animal d'una explotació porcina de la comarca d'Osona i posterior valoració de la seva implementació

Des de la publicació de la Llei de Benestar Animal RD 1135/ 2002, de 31 d’octubre que regula els tres aspectes clau de la producció porcina‐ sistemes d’estabulació i construccions permeses; formació obligatòria dels ramaders i maneig dels animals‐ totes les granges de nova construcció han estat projectades seguint els seus preceptes. Mentre que les granges existents han hagut d’adaptar‐hi les seves instal∙lacions sota amenaça de tancament si no es complien els requisits. L’objectiu d’aquest treball ha estat l’elaboració de l’estudi tècnic‐ econòmic per a l’adaptació a la Llei de Benestar Animal d’una explotació porcina de la comarca d’Osona. Després d’avaluar la situació inicial de les instal∙lacions, establir les línies de previsió de creixement i analitzar els avantatges i inconvenients de cada sistema i model, s’opta pel sistema d’alimentació electrònic model Nedap en grup dinàmic de truges sobre sòl amb jaç de palla. Una decisió no massa extesa en granges del sud d’Europa on se sol preferir l’slat de formigó i/o superfície pavimentada, però imprescindible perquè aquesta explotació pogués aconseguir una millor gestió de les dejeccions ramaderes i assegurar una millora agronòmica de les terres de conreu. El treball conclou amb el seguiment del desenvolupament de l’alternativa escollida i una valoració dels canvis derivats de l’adaptació al Benestar Animal després del primer any i mig en ús. Les millores obtingudes en termes de maneig, funcionament de la granja, salut dels animals i índex productius són remarcables. D’una banda, cal destacar el fet de tenir un nombre de coixeres molt menor respecte les granges amb superfície dura, així com la facilitat i rapidesa en els parts degut al benestar. De l’altra,la reducció del volum de purí, l’increment de la fracció sòlida i la disponibilitat de compost per al camp. Per això, no és exagerat observar el jaç amb palla com una de les solucions més adequades i equilibrades per aquesta explotació que combina boví, porcí i terra per a la producció de cultius.

Aproximació a la biografia i el pensament educatiu de Maria Teresa Codina: Educant entre la utopia i la realitat

Maria Teresa Codina i Mir és una mestra i pedagoga que ha tingut especial rellevància en la pedagogia del segle XX a Catalunya. Durant la seva trajectòria personal i professional ha estat compromesa en l’educació dels sectors socials més desfavorits i en la renovació pedagògica de Catalunya. Aquesta tasca tan important que ha dut a terme de manera silenciosa, no pot ser ignorada. Amb aquest treball pretenem analitzar-la i donar-la a conèixer. És per aquest motiu que hem fet una aproximació biogràfica de la vida i idees pedagògiques de Maria Teresa Codina a partir de la veu de persones que l’han coneguda i que han estat significatives en la seva vida. A través de successives entrevistes i l’anàlisi de documents personals i inèdits de Codina, volem aprofundir en la seva trajectòria personal i professional i conèixer les seves idees educatives des d’una visió més propera, viva i humana.

Característiques bàsiques de l’organització d’espais, d’ambients i dels tipus de materials que hauria d’estar present en les escoles d’educació infantil (3-6) per garantir pràctiques educatives de qualitat

Amb el present treball es vol aprofundir en la manera que influeix l’organització d’espais, d’ambients i les característiques dels materials en el procés educatiu. A partir d’una recerca teòrica en base les necessitats educatives de la societat actual, les necessitats evolutives dels infants, i en base a l’observació i anàlisi d’escoles reggianes i catalanes referents que tenen en compte com a agent educador l’espai, els ambients i els materials, es volen reunir quines són les característiques bàsiques de l’organització dels espais, ambients i materials per garantir una educació de qualitat a l’etapa infantil (3-6).

La situació educativa actual de les aules hospitalaries de Catalunya

El treball Final de Grau que es mostra a continuació és un estudi de cas sobre la realitat educativa actual de les aules hospitalàries de Catalunya. Un dels objectius que persegueix és el de conèixer, descriure i analitzar les metodologies educatives emprades i els elements que marquen la seva línia educativa. Per dur-lo a terme s’han realitzat entrevistes a les aules de tres hospitals de referència a Catalunya: Vall d’Hebron (Barcelona), Sant Joan de Déu (Esplugues de Llobregat) i Fundació Althaia (Manresa). Aquest estudi ha permès descobrir les principals característiques que marquen la pedagogia hospitalària així com els motius pels quals es duen a terme unes accions o unes altres. També ha donat la possibilitat de conèixer altres maneres d’atendre a la diversitat dins l’aula.

LC-MS method development and comparison of sampling materials for the analysis of organic gunshot residues

This study aimed at comparing the efficiency of various sampling materials for the collection and subsequent analysis of organic gunshot residues (OGSR). To the best of our knowledge, it is the first time that sampling devices were investigated in detail for further quantitation of OGSR by LC-MS. Seven sampling materials, namely two "swab"-type and five "stub"-type collection materials, were tested. The investigation started with the development of a simple and robust LC-MS method able to separate and quantify molecules typically found in gunpowders, such as diphenylamine or ethylcentralite. The evaluation of sampling materials was then systematically carried out by first analysing blank extracts of the materials to check for potential interferences and determining matrix effects. Based on these results, the best four materials, namely cotton buds, polyester swabs, a tape from 3M and PTFE were compared in terms of collection efficiency during shooting experiments using a set of 9 mm Luger ammunition. It was found that the tape was capable of recovering the highest amounts of OGSR. As tape-lifting is the technique currently used in routine for inorganic GSR, OGSR analysis might be implemented without modifying IGSR sampling and analysis procedure.

Automobile Corporate Networks in Europe : Sectoral Specialization of Central and Eastern European Cities

The global automobile industry is made up of very large corporations and their various subsidiaries containing different functions that create complex locational structures. The networks formed by the 19 largest automobile transnational corporations constitute an automobile "oligopoly" representing more than 90% (OICA, 2012) of the world's production. Since the mid-1990s, Central and Eastern European cities have become attractive for transnational corporations and particularly for the production functions in the automobile sector. This leads to a crucial question. Are strategic functions (such as R&D) within these networks also located in Central and Eastern Europe, or is the region still manufacturing-oriented in the automobile industry? This paper focuses on the patterns and the main factors influencing the role of some of these new central and Eastern European cities that have become integrated in the global value chain of the automobile industry. By analysing the various locations of the specialized functions within the corporations, this study aims to extend the research on global value chains (Gereffi and Korzeniewicz; 1994, Sturgeon, 2000; Krätke, 2014). The spatial patterns of the various functions and the ownerships networks of the automobile industry are constructed in order to identify the cities supporting it. In particular, the way that national metropolises bring their national territories into the globalization of the automobile industry is addressed. For example, are there some specific advantages of capital cities compared to cities that have less integration in globalization terms?