Applying sequential injection analysis (SIA) and response surface methodology for optimization of Fenton-based processes

This work presents the use of sequential injection analysis (SIA) and the response surface methodology as a tool for optimization of Fenton-based processes. Alizarin red S dye (C.I. 58005) was used as a model compound for the anthraquinones family. whose pigments have a large use in coatings industry. The following factors were considered: [H(2)O(2)]:[Alizarin] and [H(2)O(2)]:[FeSO(4)] ratios and pH. The SIA system was designed to add reagents to the reactor and to perform on-line sampling of the reaction medium, sending the samples to a flow-through spectrophotometer for monitoring the color reduction of the dye. The proposed system fed the statistical program with degradation data for fast construction of response surface plots. After optimization, 99.7% of the dye was degraded and the TOC content was reduced to 35% of the original value. Low reagents consumption and high sampling throughput were the remarkable features of the SIA system. (C) 2008 Published by Elsevier B.V.

Photoswitches and Luminescent Rigidity Sensors Based on fac-[Re(CO)(3)(Me(4)phen)(L)](+)

The fac-[Re(CO)(3)(Me(4)phen)(trans-L)](+) complexes, Me(4)phen = 3,4,7,8-tetramethyl-1,10-phenanthroline and L = 4-styrylpyridine, stpy, or 1,2-bis(4-pyridyl)ethylene, bpe, were synthesized and characterized by their spectroscopic, photochemical, and photophysical properties. The complexes exhibit trans-to-cis isomerization upon 313, 334, 365, and 404 nm irradiation, and the true quantum yields can be efficiently determined by absorption changes combined with (1)H NMR data. For fac-[Re(CO)(3)(Me(4)phen)(trans-bpe)](+) similar quantum yields were determined at all wavelengths investigated. However, a lower value (phi(true) = 0.35) was determined for fac-[Re(CO)(3)(Me(4)phen)(trans-stpy)](+) at 404 nm irradiation, which indicates different pathways for the photoisomerization process. The photoproducts, fac-[Re(CO)(3)(Me(4)phen)(cis-L)](+), exhibit luminescence at room temperature with two maxima ascribed to the (3)IL(Me4phen) and (3)MLCT(Re -> Me4phen) excited states. The luminescence properties were investigated in different media, and the behavior in glassy EPA at 77 K showed that the contribution of each emissive state is dependent on the excitation wavelength. The photochemical and photophysical behavior of the complexes were rationalized in terms of the energy gap of excited states and can be exploited in photoswitchable luminescent rigidity sensors.

All solid-state electrochromic devices with gelatin-based electrolyte

6 x 8cm(2) electrochromic devices (ECDs) with the configuration K-glass/EC-layer/electrotype/ion-storage (IS) layer/K-glass, have been assembled using Nb2O5:Mo EC layers, a (CeO2)(0.81)-TiO2 IS-layer and a new gelatin electrolyte containing Li+ ions. The structure of the electrolyte is X-ray amorphous. Its ionic conductivity passed by a maximum of 1.5 x 10(-5) S/CM for a lithium concentration of 0.3g/15ml. The value increases with temperature and follows an Arrhenius law with an activation energy of 49.5 kJ/mol. All solid-state devices show a reversible gray coloration, a long-term stability of more than 25,000 switching cycles (+/- 2.0 V/90 s), a transmission change at 550 nm between 60% (bleached state) and 40% (colored state) corresponding to a change of the optical density (Delta OD = 0. 15) with a coloration efficiency increasing from 10cm(2)/C (initial cycle) to 23cm(2)/C (25,000th cycle). (c) 2007 Elsevier B.V. All rights reserved.

The value of a saved tree : The lifecycle of CO2-emissions associated with the combination of printing paper and electricity production of wood in the U.S. and Sweden

The pulp- and paper production is a very energy intensive industry sector. Both Sweden and the U.S. are major pulpandpaper producers. This report examines the energy and the CO2-emission connected with the pulp- and paperindustry for the two countries from a lifecycle perspective.New technologies make it possible to increase the electricity production in the integrated pulp- andpaper mill through black liquor gasification and a combined cycle (BLGCC). That way, the mill canproduce excess electricity, which can be sold and replace electricity produced in power plants. In thisprocess the by-products that are formed at the pulp-making process is used as fuel to produce electricity.In pulp- and paper mills today the technology for generating energy from the by-product in aTomlinson boiler is not as efficient as it could be compared to the BLGCC technology. Scenarios havebeen designed to investigate the results from using the BLGCC technique using a life cycle analysis.Two scenarios are being represented by a 1994 mill in the U.S. and a 1994 mill in Sweden.The scenariosare based on the average energy intensity of pulp- and paper mills as operating in 1994 in the U.S.and Sweden respectively. The two other scenarios are constituted by a »reference mill« in the U.S. andSweden using state-of-the-art technology. We investigate the impact of varying recycling rates and totalenergy use and CO2-emissions from the production of printing and writing paper. To economize withthe wood and that way save trees, we can use the trees that are replaced by recycling in a biomassgasification combined cycle (BIGCC) to produce electricity in a power station. This produces extra electricitywith a lower CO2 intensity than electricity generated by, for example, coal-fired power plants.The lifecycle analysis in this thesis also includes the use of waste treatment in the paper lifecycle. Both Sweden and theU.S. are countries that recycle paper. Still there is a lot of paper waste, this paper is a part of the countries municipalsolid waste (MSW). A lot of the MSW is landfilled, but parts of it are incinerated to extract electricity. The thesis hasdesigned special scenarios for the use of MSW in the lifecycle analysis.This report is studying and comparing two different countries and two different efficiencies on theBLGCC in four different scenarios. This gives a wide survey and points to essential parameters to specificallyreflect on, when making assumptions in a lifecycle analysis. The report shows that there arethree key parameters that have to be carefully considered when making a lifecycle analysis of wood inan energy and CO2-emission perspective in the pulp- and paper mill in the U.S. and in Sweden. First,there is the energy efficiency in the pulp- and paper mill, then the efficiency of the BLGCC and last theCO2 intensity of the electricity displaced by BIGCC or BLGCC generatedelectricity. It also show that with the current technology that we havetoday, it is possible to produce CO2 free paper with a waste paper amountup to 30%. The thesis discusses the system boundaries and the assumptions.Further and more detailed research, including amongst others thesystem boundaries and forestry, is recommended for more specificanswers.

Solar Energy assessment based on weather station data for direct site monitoring in Indonesia

This thesis evaluates different sites for a weather measurement system and a suitable PV- simulation for University of Surabaya (UBAYA) in Indonesia/Java. The weather station is able to monitor all common weather phenomena including solar insolation. It is planned to use the data for scientific and educational purposes in the renewable energy studies. During evaluation and installation it falls into place that official specifications from global meteorological organizations could not be meet for some sensors caused by the conditions of UBAYA campus. After arranging the hardware the weather at the site was monitored for period of time. A comparison with different official sources from ground based and satellite bases measurements showed differences in wind and solar radiation. In some cases the monthly average solar insolation was deviating 42 % for satellite-based measurements. For the ground based it was less than 10 %. The average wind speed has a difference of 33 % compared to a source, which evaluated the wind power in Surabaya. The wind direction shows instabilities towards east compared with data from local weather station at the airport. PSET has the chance to get some investments to investigate photovoltaic on there own roof. With several simulations a suitable roof direction and the yearly and monthly outputs are shown. With a 7.7 kWpeak PV installation with the latest crystalline technology on the market 8.82 MWh/year could be achieved with weather data from 2012. Thin film technology could increase the value up to 9.13 MWh/year. However, the roofs have enough area to install PV. Finally the low price of electricity in Indonesia makes it not worth to feed in the energy into the public grid.

Tha contribution of home-based technology to older people's quality of life in extra care housing

Background: British government policy for older people focuses on a vision of active ageing and independent living. In the face of diminishing personal capacities, the use of appropriate home-based technology (HBT) devices could potentially meet a wide range of needs and consequently improve many aspects of older people's quality of life such as physical health, psychosocial well-being, social relationships, and their physical or living environment. This study aimed to examine the use of HBT devices and the correlation between use of such devices and quality of life among older people living in extra-care housing (ECH).  Methods: A structured questionnaire was administered for this study. Using purposive sampling 160 older people living in extra-care housing schemes were selected from 23 schemes in England. A face-to-face interview was conducted in each participant's living unit. In order to measure quality of life, the SEIQoL-Adapted and CASP-19 were used.  Results: Although most basic appliances and emergency call systems were used in the living units, communally provided facilities such as personal computers, washing machines, and assisted bathing equipment in the schemes were not well utilised. Multiple regression analysis adjusted for confounders including age, sex, marital status, living arrangement and mobility use indicated a coefficient of 1.17 with 95% CI (0.05, 2.29) and p = 0.04 [SEIQoL-Adapted] and 2.83 with 95% CI (1.17, 4.50) and p = 0.001 [CASP-19].  Conclusions: The findings of the present study will be value to those who are developing new form of specialised housing for older people with functional limitations and, in particular, guiding investments in technological aids. The results of the present study also indicate that the home is an essential site for developing residential technologies.

Influences of infrastructure and attitudes to health on value of travel time savings in bicycle journeys

In this paper we investigate how attitudes to health and exercise in connection with cycling influence the estimation of values of travel time savings in different kinds of bicycle environments (mixed traffic, bicycle lane in the road way, bicycle path next to the road, and bicycle path not in connection with the road). The results, based on two Swedish stated choice studies, suggest that the values of travel time savings are lower when cycling in better conditions. Surprisingly, the respondents do not consider cycling on a path next to the road worse than cycling on a path not in connection to the road, indicating that they do not take traffic noise and air pollution into account in their decision to cycle. No difference can be found between cycling on a road way (mixed traffic) and cycling in a bicycle lane in the road way. The results also indicate that respondents that include health aspects in their choice to cycle have lower value of travel time savings for cycling than respondents that state that health aspects are of less importance, at least when cycling on a bicycle path. The appraisals of travel time savings regarding cycling also differ a lot depending on the respondents’ alternative travel mode. The individuals who stated that they will take the car if they do not cycle have a much higher valuation of travel time savings than the persons stating public transport as the main alternative to cycling.

The Value of Using Interns in the Academic Library

Graduate programs in library and information science programs provide strong theoretical foundations in information systems, library organization, library history, management, collection management to support user needs, reference, information literacy instruction, and specialized information resources. While practical course projects create approximations of professional librarianship, the best hands-on learning experiences include work-based learning through internship placements in actual libraries. Internships immerse students in valuable hands-on practical work in real-workd settings. Internships also learn from the interns' perspectives on library processes and challenges, while also providing library professionals with enriching opportunities to mentor library students and convey knowledge to future generations of professionals.

Aplicação de modelos de avaliação por múltiplos no Brasil

Com base na literatura internacional, testa-se o desempenho de alguns Drivers de Valor comumente utilizados para avaliação de empresas pelos práticos em finanças através de modelos de regressão simples do tipo cross-section que estimam os Múltiplos de Mercado (?'s dos modelos). Utilizando dados de empresas listadas na Bolsa de Valores de São Paulo-Bovespa, diagnostica-se o comportamento dos diversos múltiplos no decorrer do período entre 1994-2004, atentando-se também para as particularidades das atividades desempenhadas pelas empresas da amostra (e seus possíveis impactos no desempenho de cada Driver de Valor) através de uma subseqüente análise com a separação das empresas da amostra em setores. Extrapolando os padrões de avaliação por múltiplos simples usados pelos analistas de empresas das principais instituições financeiras presentes no Brasil, verifica-se que a introdução de intercepto na formulação tradicional não oferece resultados satisfatórios na redução dos erros de apreçamento. Os resultados encontrados podem não ser genericamente representativos, dada a limitada disponibilidade de informações e as restrições impostas na obtenção da base de dados.

Estimating the term structure of volatility and fixed income derivative pricing

Estimating the parameters of the instantaneous spot interest rate process is of crucial importance for pricing fixed income derivative securities. This paper presents an estimation for the parameters of the Gaussian interest rate model for pricing fixed income derivatives based on the term structure of volatility. We estimate the term structure of volatility for US treasury rates for the period 1983 - 1995, based on a history of yield curves. We estimate both conditional and first differences term structures of volatility and subsequently estimate the implied parameters of the Gaussian model with non-linear least squares estimation. Results for bond options illustrate the effects of differing parameters in pricing.

Comparing value-at-risk methodologies

In this paper, we compare four different Value-at-Risk (V aR) methodologies through Monte Carlo experiments. Our results indicate that the method based on quantile regression with ARCH effect dominates other methods that require distributional assumption. In particular, we show that the non-robust methodologies have higher probability to predict V aRs with too many violations. We illustrate our findings with an empirical exercise in which we estimate V aR for returns of S˜ao Paulo stock exchange index, IBOVESPA, during periods of market turmoil. Our results indicate that the robust method based on quantile regression presents the least number of violations.

The forward- and the equity-premium puzzles: two symptoms of the same illness?

In this paper we revisit the relationship between the equity and the forward premium puzzles. We construct return-based stochastic discount factors under very mild assumptions and check whether they price correctly the equity and the foreign currency risk premia. We avoid log-linearizations by using moments restrictions associated with euler equations to test the capacity of our return-based stochastic discount factors to price returns on the relevant assets. Our main finding is that a pricing kernel constructed only using information on American domestic assets accounts for both domestic and international stylized facts that escape consumption based models. In particular, we fail to reject the null hypothesis that the foreign currency risk premium has zero price when the instrument is the own current value of the forward premium.

O método das opções reais aplicado na avaliação das oportunidades de investimento no setor de seguros

Esta dissertação tem como objetivo demonstrar a validade do método de análise da avaliação das oportunidades de investimentos que utiliza a Teoria das Opções Reais. De forma a demonstrar a aplicabilidade desta metodologia de avaliação, será exemplificado, com base no modelo das opções reais, uma oportunidade de investimento no setor de seguros. As opções reais fecham a brecha entre as finanças e o planejamento estratégico introduzindo um meio para incorporar o impacto da incerteza implícita nas oportunidades de investimento, e ao mesmo tempo considerando como as ações gerenciais podem limitar as possíveis perdas ou capitalizar os possíveis ganhos nos projetos de investimento. Este processo de avaliação não direciona somente os administradores a focar suas atenções nas diferentes oportunidades e alternativas estratégicas, mas fornece também uma metodologia sistemática para medir a influencia das ações contingentes sobre o próprio risco e valor do projeto. Os métodos tradicionais de avaliação dos investimentos assumem que os administradores adotem um comportamento passivo à implementação dos projetos, considerando somente o valor dos fluxos de caixa esperados dos mesmos. A partir da teoria de precificação das opções financeiras, as opções reais expandem o valor global do projeto incorporando os potenciais ganhos e limitando as possíveis perdas. O modelo de opções reais permite aos administradores alavancar o valor do acionista em um ambiente de negócios dinâmico considerando a possibilidade de uma gestão ótima das opções estratégicas e operacionais existentes. Tipicamente, o ativo subjacente é o valor bruto dos fluxos de caixa esperados do projeto, mas considerando a incerteza, o valor total do projeto deve considerar o valor implícito das opções reais presentes nas oportunidades de investimento. A flexibilidade gerencial, que permite adaptar as decisões futuras as mudanças inesperadas do mercado, representa um fonte crucial de valor agregado em um ambiente dinâmico. Muitas opções reais presentes nos projetos e que interagem entre si, podem ocorrer em paralelo ou seqüencialmente, de maneira que o valor combinado destas opções seja diferente da simples soma algébrica das opções individuais.

The Capm and Fama-French models in Brazil: a comparative study

This paper confronts the Capital Asset Pricing Model - CAPM - and the 3-Factor Fama-French - FF - model using both Brazilian and US stock market data for the same Sample period (1999-2007). The US data will serve only as a benchmark for comparative purposes. We use two competing econometric methods, the Generalized Method of Moments (GMM) by (Hansen, 1982) and the Iterative Nonlinear Seemingly Unrelated Regression Estimation (ITNLSUR) by Burmeister and McElroy (1988). Both methods nest other options based on the procedure by Fama-MacBeth (1973). The estimations show that the FF model fits the Brazilian data better than CAPM, however it is imprecise compared with the US analog. We argue that this is a consequence of an absence of clear-cut anomalies in Brazilian data, specially those related to firm size. The tests on the efficiency of the models - nullity of intercepts and fitting of the cross-sectional regressions - presented mixed conclusions. The tests on intercept failed to rejected the CAPM when Brazilian value-premium-wise portfolios were used, contrasting with US data, a very well documented conclusion. The ITNLSUR has estimated an economically reasonable and statistically significant market risk premium for Brazil around 6.5% per year without resorting to any particular data set aggregation. However, we could not find the same for the US data during identical period or even using a larger data set. Este estudo procura contribuir com a literatura empírica brasileira de modelos de apreçamento de ativos. Dois dos principais modelos de apreçamento são Infrontados, os modelos Capital Asset Pricing Model (CAPM)e de 3 fatores de Fama-French. São aplicadas ferramentas econométricas pouco exploradas na literatura nacional na estimação de equações de apreçamento: os métodos de GMM e ITNLSUR. Comparam-se as estimativas com as obtidas de dados americanos para o mesmo período e conclui-se que no Brasil o sucesso do modelo de Fama e French é limitado. Como subproduto da análise, (i) testa-se a presença das chamadas anomalias nos retornos, e (ii) calcula-se o prêmio de risco implícito nos retornos das ações. Os dados revelam a presença de um prêmio de valor, porém não de um prêmio de tamanho. Utilizando o método de ITNLSUR, o prêmio de risco de mercado é positivo e significativo, ao redor de 6,5% ao ano.

Evaluating Value-at-Risk models via Quantile regressions

This paper is concerned with evaluating value at risk estimates. It is well known that using only binary variables to do this sacrifices too much information. However, most of the specification tests (also called backtests) avaliable in the literature, such as Christoffersen (1998) and Engle and Maganelli (2004) are based on such variables. In this paper we propose a new backtest that does not realy solely on binary variable. It is show that the new backtest provides a sufficiant condition to assess the performance of a quantile model whereas the existing ones do not. The proposed methodology allows us to identify periods of an increased risk exposure based on a quantile regression model (Koenker & Xiao, 2002). Our theorical findings are corroborated through a monte Carlo simulation and an empirical exercise with daily S&P500 time series.